Showing 1–32 of 32 results for author: Battin-Leclerc, F

A Comparative Study of the Formation of Aromatics in Rich Methane Flames Doped by Unsaturated Compounds

Authors: Hadj-Ali Gueniche, Joffrey Biet, Pierre-Alexandre Glaude, René Fournet, Frédérique Battin-Leclerc

Abstract: For a better modeling of the importance of the different channels leading to the first aromatic ring, we have compared the structures of laminar rich premixed methane flames doped with several unsaturated hydrocarbons: allene and propyne, because they are precursors of propargyl radicals which are well known as having an important role in forming benzene, 1,3-butadiene to put in evidence a possi… ▽ More For a better modeling of the importance of the different channels leading to the first aromatic ring, we have compared the structures of laminar rich premixed methane flames doped with several unsaturated hydrocarbons: allene and propyne, because they are precursors of propargyl radicals which are well known as having an important role in forming benzene, 1,3-butadiene to put in evidence a possible production of benzene due to reactions of C4 compounds, and, finally, cyclopentene which is a source of cyclopentadienylmethylene radicals which in turn are expected to easily isomerizes to give benzene. These flames have been stabilized on a burner at a pressure of 6.7 kPa (50 Torr) using argon as dilutant, for equivalence ratios (?) from 1.55 to 1.79. A unique mechanism, including the formation and decomposition of benzene and toluene, has been used to model the oxidation of allene, propyne, 1,3 butadiene and cyclopentene. The main reaction pathways of aromatics formation have been derived from reaction rate and sensitivity analyses and have been compared for the three types of additives. These combined analyses and comparisons can only been performed when a unique mechanism is available for all the studied additives. △ Less

Submitted 26 May, 2009; originally announced May 2009.

Journal ref: Fuel 88 (2009) 1388-1393

Experimental Autoignition of C4-C6 Saturated and Unsaturated Methyl and Ethyl Esters

Authors: Hayet Bennadji, Joffrey Biet, Lucie Coniglio-Jaubert, Francis Billaud, Pierre-Alexandre Glaude, Frédérique Battin-Leclerc

Abstract: Autoignition delay times, ?, of methyl crotonate, methyl acrylate, ethyl butanoate, ethyl crotonate, and ethyl acrylate were studied in shock tube experiments. A series of mixtures diluted with argon, of varying fuel/oxygen equivalence ratios (?=0.25, 0.4, 1.0, and 2.0), were measured behind reflected shock waves over the temperature range of 1280-1930 K, pressure range of 7-9.65 atm, during whi… ▽ More Autoignition delay times, ?, of methyl crotonate, methyl acrylate, ethyl butanoate, ethyl crotonate, and ethyl acrylate were studied in shock tube experiments. A series of mixtures diluted with argon, of varying fuel/oxygen equivalence ratios (?=0.25, 0.4, 1.0, and 2.0), were measured behind reflected shock waves over the temperature range of 1280-1930 K, pressure range of 7-9.65 atm, during which the logarithm of ? varies linearly as a function of the inverse temperature for all equivalence ratios. The ignition delay time decreases as temperature rises. The dependence of ? on temperature, and reactant concentrations is given in an empirical correlation. The results provide a database for the validation of small saturated and unsaturated esters kinetic mechanisms at elevated temperatures and pressure combustion. △ Less

Submitted 22 April, 2009; originally announced April 2009.

Comments: European Combustion Meeting 2009, Vienne : Autriche (2009)

Modeling Study of the Low-Temperature Oxidation of Large Methyl Esters

Authors: Joffrey Biet, Valérie Warth, Olivier Herbinet, Pierre-Alexandre Glaude, Frédérique Battin-Leclerc

Abstract: This study focuses on the automatic generation by the software EXGAS of kinetic models for the oxidation of large methyl esters using a single set of kinetic parameters. The obtained models allow to well reproduce the oxidation of n-decane / methyl palmitate mixture in a jet-stirred reactor. This paper also presents the construction and a comparison of models for methyl esters from C7 up to C17… ▽ More This study focuses on the automatic generation by the software EXGAS of kinetic models for the oxidation of large methyl esters using a single set of kinetic parameters. The obtained models allow to well reproduce the oxidation of n-decane / methyl palmitate mixture in a jet-stirred reactor. This paper also presents the construction and a comparison of models for methyl esters from C7 up to C17 in terms f conversion in a jet-stirred reactor and of ignition delay time in a shock tube. This comparison study showed that methyl esters larger than methyl octanoate behave similarly and have very close reactivities. △ Less

Submitted 22 April, 2009; originally announced April 2009.

Comments: European Combustion Meeting 2009, Vienne : Autriche (2009)

Detailed kinetic models for the low-temperature auto ignition of gasoline surrogates

Authors: Roda Bounaceur, Pierre-Alexandre Glaude, René Fournet, Valérie Warth, Frédérique Battin-Leclerc

Abstract: In the context of the search for gasoline surrogates for kinetic modeling purpose, this paper describes a new model for the low-temperature auto-ignition of n-heptane/iso-octane/hexene/toluene blends for the different linear isomers of hexene. The model simulates satisfactory experimental results obtained in a rapid compression machine for temperatures ranging from 650 to 850 K in the case of bi… ▽ More In the context of the search for gasoline surrogates for kinetic modeling purpose, this paper describes a new model for the low-temperature auto-ignition of n-heptane/iso-octane/hexene/toluene blends for the different linear isomers of hexene. The model simulates satisfactory experimental results obtained in a rapid compression machine for temperatures ranging from 650 to 850 K in the case of binary and ternary mixtures including iso octane, 1-hexene and toluene. Predictive simulations have also been performed for the autoignition of n heptane/iso octane/hexene/toluene quaternary mixtures: the predicted reactivity is close to that of pure iso octane with a retarding effect when going from 1- to 3-alkene. △ Less

Submitted 20 April, 2009; originally announced April 2009.

Comments: European Combustion Meeting 2009 (ECM 2009), Vienne : Autriche (2009)

A Lean Methane Prelixed Laminar Flame Doped witg Components of Diesel Fuel. Part I: n)Butylbenzene

Authors: Emir Pousse, Pierre-Alexandre Glaude, René Fournet, Frédérique Battin-Leclerc

Abstract: To better understand the chemistry involved during the combustion of components of diesel fuel, the structure of a laminar lean premixed methane flame doped with n-butylbenzene has been investigated. The inlet gases contained 7.1% (molar) of methane, 36.8% of oxygen and 0.96% of n-butylbenzene corresponding to an equivalence ratio of 0.74 and a ratio C10H14 / CH4 of 13.5%. The flame has been sta… ▽ More To better understand the chemistry involved during the combustion of components of diesel fuel, the structure of a laminar lean premixed methane flame doped with n-butylbenzene has been investigated. The inlet gases contained 7.1% (molar) of methane, 36.8% of oxygen and 0.96% of n-butylbenzene corresponding to an equivalence ratio of 0.74 and a ratio C10H14 / CH4 of 13.5%. The flame has been stabilized on a burner at a pressure of 6.7 kPa using argon as diluent, with a gas velocity at the burner of 49.2 cm/s at 333 K. Quantified species included the usual methane C0-C2 combustion products, but also 16 C3-C5 hydrocarbons, 7 C1-C3 oxygenated compounds, as well as 20 aromatic products, namely benzene, toluene, phenylacetylene, styrene, ethylbenzene, xylenes, allylbenzene, propylbenzene, cumene, methylstyrenes, butenylbenzenes, indene, indane, naphthalene, phenol, benzaldehyde, anisole, benzylalcohol, benzofuran, and isomers of C10H10 (1-methylindene, dihydronaphtalene, butadienylbenzene). A new mechanism for the oxidation of n-butylbenzene is proposed whose predictions are in satisfactory agreement with measured species profiles in flames and flow reactor experiments. The main reaction pathways of consumption of n butylbenzene have been derived from flow rate analyses. △ Less

Submitted 28 March, 2009; originally announced March 2009.

Journal ref: Combustion and Flame 156 (2009) 954-974

Formation of aromatics in rich methane flames doped by unsaturated compounds

Authors: Hadj-Ali Gueniche, Pierre-Alexandre Glaude, René Fournet, Frédérique Battin-Leclerc

Abstract: In order to better understand the importance of the different channels leading to the first aromatic ring, we have investigated, the structure of a laminar rich premixed methane flame doped with several unsaturated hydrocarbons: allene and propyne, as they are precursors of propargyl radicals, which are well known as having an important role in forming benzene, 1,3-butadiene, to put in evidence… ▽ More In order to better understand the importance of the different channels leading to the first aromatic ring, we have investigated, the structure of a laminar rich premixed methane flame doped with several unsaturated hydrocarbons: allene and propyne, as they are precursors of propargyl radicals, which are well known as having an important role in forming benzene, 1,3-butadiene, to put in evidence a possible production of benzene due to reactions of C4 compounds, and, finally, cyclopentene, which is a source of cyclopentadienyl methylene radicals which are supposed to easily isomerizes to give benzene. A ratio additive / CH4 of 16 % and an equivalence ratio of 1.79 have been used. These flames have been stabilized on a burner at a pressure of 6.7 kPa using argon as dilutant. A new mechanism for the oxidation of allene, propyne, 1,3 butadiene and cyclopentene has been proposed including the formation and decomposition of benzene and toluene. The main reaction pathways of formation of aromatics have been derived from flow rate analyses and have been compared for the three types of additives. △ Less

Submitted 28 March, 2009; originally announced March 2009.

Comments: European Combustion Meeting, Chania : Grèce (2007)

Modeling of the formation of short-chain acids in propane flames

Authors: Frédérique Battin-Leclerc, A. A. Konnov, J. L. Jaffrezo, M. Legrand

Abstract: In order to better understand their potential formation in combustion systems, a detailed kinetic mechanism for the formation of short-chain monocarboxylic acids, formic (HCOOH), acetic (CH3COOH), propionic (C2H5COOH) and propenic (C2H3COOH)) acids, has been developed. Simulations of lean (equivalence ratios from 0.9 to 0.48) laminar premixed flames of propane stabilized at atmospheric pressure… ▽ More In order to better understand their potential formation in combustion systems, a detailed kinetic mechanism for the formation of short-chain monocarboxylic acids, formic (HCOOH), acetic (CH3COOH), propionic (C2H5COOH) and propenic (C2H3COOH)) acids, has been developed. Simulations of lean (equivalence ratios from 0.9 to 0.48) laminar premixed flames of propane stabilized at atmospheric pressure with nitrogen as diluent have been performed. It was found that amounts up to 25 ppm of acetic acid, 15 ppm of formic acid and 1 ppm of C3 acid can be formed for some positions in the flames. Simulations showed that the more abundant C3 acid formed is propenic acid. A quite acceptable agreement has been obtained with the scarce results from the literature concerning oxygenated compounds, including aldehydes (CH2O, CH3CHO) and acids. A reaction pathways analysis demonstrated that each acid is mainly derived from the aldehyde of similar structure. △ Less

Submitted 28 March, 2009; originally announced March 2009.

Comments: European Combustion Meeting, Chania : Grèce (2007)

A complex chemical kinetic mechanism for the oxidation of gasoline surrogate fuels: n heptane, iso octane and toluene - Mechanism development and validation

Authors: A. Pires Da Cruz, C. Pera, Jörg Anderlohr, Roda Bounaceur, Frédérique Battin-Leclerc

Abstract: The development and validation against experimental results of a new gasoline surrogate complex kinetic mechanism is presented in this paper. The surrogate fuel is a ternary mixture of n heptane, iso octane and toluene. The full three components mechanism is based on existing n heptane/iso octane (gasoline PRF) and toluene mechanisms which were modified and coupled for the purpose of this work.… ▽ More The development and validation against experimental results of a new gasoline surrogate complex kinetic mechanism is presented in this paper. The surrogate fuel is a ternary mixture of n heptane, iso octane and toluene. The full three components mechanism is based on existing n heptane/iso octane (gasoline PRF) and toluene mechanisms which were modified and coupled for the purpose of this work. Mechanism results are compared against available experimental data from the literature. Simulations with the PRF plus toluene mechanism show that its behavior is in agreement with experimental results for most of the tested settings. These include a wide variety of thermodynamic conditions and fuel proportions in experimental configurations such as HCCI engine experiments, rapid compression machines, a shock tube and a jet stirred reactor. △ Less

Submitted 25 March, 2009; originally announced March 2009.

Comments: Proceedings of the European Combustion Meeting 2007, Chania : Grèce (2007)

Experimental study of the structure of a lean premixed indane/CH4/O2/Ar flame

Authors: Emir Pousse, Pierre-Alexandre Glaude, René Fournet, Frédérique Battin-Leclerc

Abstract: In order to better understand the chemistry involved during the combustion of components of diesel fuel, the structure of a laminar lean premixed methane flame doped with indane has been investigated. The gases of this flame contains 7.1% (molar) of methane, 36.8% of oxygen and 0.90% of indane corresponding to an equivalence ratio of 0.74 and a ratio C9H10/CH4 of 12.75%. The flame has been stabi… ▽ More In order to better understand the chemistry involved during the combustion of components of diesel fuel, the structure of a laminar lean premixed methane flame doped with indane has been investigated. The gases of this flame contains 7.1% (molar) of methane, 36.8% of oxygen and 0.90% of indane corresponding to an equivalence ratio of 0.74 and a ratio C9H10/CH4 of 12.75%. The flame has been stabilized on a burner at a pressure of 6.7 kPa using argon as dilutant, with a gas velocity at the burner of 49.2 cm/s at 333 K. Quantified species included usual methane C0-C2 combustion products, but also 11 C3-C5 hydrocarbons and 3 C1-C3 oxygenated compounds, as well as 17 aromatic products, namely benzene, toluene, phenylacetylene, styrene, ethylbenzene, xylenes, trimethylbenzenes, ethyltoluenes, indene methylindane, methylindene, naphthalene, phenol, benzaldehyde, benzofuran. The temperature was measured thanks to a thermocouple in PtRh (6%)-PtRh (30%) settled inside the enclosure and ranged from 800 K close to the burner up to 2000 K in the burned gases. △ Less

Submitted 25 March, 2009; originally announced March 2009.

Comments: 6th International Seminar on Flame Structure, Bruxelles : Belgique (2008)

Modeling of NO sensitization of IC engines surrogate fuels auto-ignition and combustion

Authors: Jörg Anderlohr, A. Pires Da Cruz, Roda Bounaceur, Frédérique Battin-Leclerc

Abstract: This paper presents a new chemical kinetic model developed for the simulation of auto-ignition and combustion of engine surrogate fuel mixtures sensitized by the presence of NOx. The chemical mechanism is based on the PRF auto-ignition model (n-heptane/iso-octane) of Buda et al. [1] and the NO/n-butane/n-pentane model of Glaude et al. [2]. The later mechanism has been taken as a reference for th… ▽ More This paper presents a new chemical kinetic model developed for the simulation of auto-ignition and combustion of engine surrogate fuel mixtures sensitized by the presence of NOx. The chemical mechanism is based on the PRF auto-ignition model (n-heptane/iso-octane) of Buda et al. [1] and the NO/n-butane/n-pentane model of Glaude et al. [2]. The later mechanism has been taken as a reference for the reactions of NOx with larger alcanes (n-heptane, iso-octane). A coherent two components engine fuel surrogate mechanism has been generated which accounts for the influence of NOx on auto-ignition. The mechanism has been validated for temperatures between 700 K and 1100 K and pressures between 1 and 10 atm covering the temperature and pressure ranges characteristic of engine post-oxidation thermodynamic conditions. Experiments used for validation include jet stirred reactor conditions for species evolution as a function of temperature, as well as diesel HCCI engine experiments for auto-ignition delay time measurements. △ Less

Submitted 25 March, 2009; originally announced March 2009.

Comments: 21st International Colloquium on the Dynamics of Explosions and Reactive Systems, Poitiers : France (2007)

Modeling of autoignition and NO sensitization for the oxidation of IC engine surrogate fuels

Authors: Jörg Anderlohr, Roda Bounaceur, A. Pires Da Cruz, Frédérique Battin-Leclerc

Abstract: This paper presents an approch for modeling with one single kinetic mechanism the chemistry of the autoignition and combustion processes inside an internal combustion engine, as well as the chemical kinetics governing the post-oxidation of unburned hydrocarbons in engine exhaust gases. Therefore a new kinetic model was developed, valid over a wide range of temperatures including the negative tem… ▽ More This paper presents an approch for modeling with one single kinetic mechanism the chemistry of the autoignition and combustion processes inside an internal combustion engine, as well as the chemical kinetics governing the post-oxidation of unburned hydrocarbons in engine exhaust gases. Therefore a new kinetic model was developed, valid over a wide range of temperatures including the negative temperature coefficient regime. The model simulates the autoignition and the oxidation of engine surrogate fuels composed of n-heptane, iso-octane and toluene, which are sensitized by the presence of nitric oxides. The new model was obtained from previously published mechanisms for the oxidation of alkanes and toluene where the coupling reactions describing interactions between hydrocarbons and NOx were added. The mechanism was validated against a wide range of experimental data obtained in jet-stirred reactors, rapid compression machines, shock tubes and homogenous charge compression ignition engines. Flow rate and sensitivity analysis were performed in order to explain the low temperature chemical kinetics, especially the impact of NOx on hydrocarbon oxidation. △ Less

Submitted 23 March, 2009; originally announced March 2009.

Journal ref: Combustion and Flame 156 (2009) 505-521

Influence of the position of the double bond on the autoignition of linear alkenes at low temperature

Authors: Roda Bounaceur, Valérie Warth, Baptiste Sirjean, Pierre-Alexandre Glaude, René Fournet, Frédérique Battin-Leclerc

Abstract: The influence of the position of the double bond on the autoignition... The influence of the position of the double bond on the autoignition... △ Less

Submitted 22 March, 2009; originally announced March 2009.

Journal ref: Proceedings of the Combustion Institute 32 (2009) 387-394

A Tentative Modeling Study of the Effect of Wall Reactions on Oxidation Phenomena

Authors: Richard Porter, Pierre-Alexandre Glaude, Frédéric Buda, Frédérique Battin-Leclerc

Abstract: This paper gives details of a tentative modeling study that investigates the inhibiting effect of internal reactor walls treated with acid... This paper gives details of a tentative modeling study that investigates the inhibiting effect of internal reactor walls treated with acid... △ Less

Submitted 22 March, 2009; originally announced March 2009.

Journal ref: Energy & Fuels 22 (2008) 3736-3743

An Experimental and Kinetic Modeling Study of the Oxidation of the Four Isomers of Butanol

Authors: Jeffrey T. Moss, Andrew M. Berkowitz, Matthew A. Oehlschlaeger, Joffrey Biet, Valérie Warth, Pierre-Alexandre Glaude, Frédérique Battin-Leclerc

Abstract: Butanol, and alcohol which can be produced from biomass sources Butanol, and alcohol which can be produced from biomass sources △ Less

Submitted 22 March, 2009; originally announced March 2009.

Journal ref: Journal of Physical Chemistry A 112 (2008) 10843-10855

Influence of EGR compounds on the oxidation of an HCCI-diesel surrogate

Authors: Jörg Anderlohr, A. Piperel, A. Pires Da Cruz, Roda Bounaceur, Frédérique Battin-Leclerc, Philippe Dagaut, X. Montagne

Abstract: This paper presents an experimental and numerical study of the impact of various additives on the oxidation of a typical automotive surrogate fuel blend, i.e. n-heptane and toluene. It examines the impact of engine re-cycled exhaust has compounds on the control of an Homogeneous Charge Compression-Ignition (HCCI) engine. Series of experiments were performed in a hihly diluted Jet-Stirred Reactor… ▽ More This paper presents an experimental and numerical study of the impact of various additives on the oxidation of a typical automotive surrogate fuel blend, i.e. n-heptane and toluene. It examines the impact of engine re-cycled exhaust has compounds on the control of an Homogeneous Charge Compression-Ignition (HCCI) engine. Series of experiments were performed in a hihly diluted Jet-Stirred Reactor (JDR) at pressures of 1 and 10 atm (1 atm = 101,325 Pa). The chosen thermo-chemical conditions were close to those characteristices of the pre-ignition period in an HCCI engine. The influence of various additives, namely nitric oxide (NO), ethylene (C2H4) and methanol (CH3OH), on the oxidation of a n-heptane/toluene blend was studied over a wide range of temperatures (550-1100 K), including the zone of the Negative Temperature Coefficient (NTC). △ Less

Submitted 22 March, 2009; originally announced March 2009.

Journal ref: PROCEEDINGS OF THE COMBUSTION INSTITUTE 32 (2009) 2851-2859

An experimental and kinetic modelling study of the oxidation of the four isomers of butanol

Authors: J. T. Moss, A. M. Berkowitz, M. A. Oehlschlaeger, Joffrey Biet, Valérie Warth, Pierre-Alexandre Glaude, Frédérique Battin-Leclerc

Abstract: Butanol, an alcohol which can be produced from biomass sources, has received recent interest as an alternative to gasoline for use in spark ignition engines and as a possible blending compound with fossil diesel or biodiesel. Therefore, the autoignition of the four isomers of butanol (1-butanol, 2-butanol, iso-butanol, and tert-butanol) has been experimentally studied at high temperatures in a s… ▽ More Butanol, an alcohol which can be produced from biomass sources, has received recent interest as an alternative to gasoline for use in spark ignition engines and as a possible blending compound with fossil diesel or biodiesel. Therefore, the autoignition of the four isomers of butanol (1-butanol, 2-butanol, iso-butanol, and tert-butanol) has been experimentally studied at high temperatures in a shock tube and a kinetic mechanism for description of their high-temperature oxidation has been developed. Ignition delay times for butanol/oxygen/argon mixtures have been measured behind reflected shock waves at temperatures and pressures ranging from approximately 1200 to 1800 K and 1 to 4 bar. Electronically excited OH emission and pressure measurements were used to determine ignition delay times. A detailed kinetic mechanism has been developed to describe the oxidation of the butanol isomers and validated by comparison to the shock tube measurements. Reaction flux and sensitivity analysis indicate that the consumption of 1 butanol and iso-butanol, the most reactive isomers, takes place primarily by H-atom abstraction resulting in the formation of radicals, the decomposition of which yields highly reactive branching agents, H-atoms and OH radicals. Conversely, the consumption of tert butanol and 2-butanol, the least reactive isomers, takes place primarily via dehydration, resulting in the formation of alkenes, which lead to resonance stabilized radicals with very low reactivity. To our knowledge, the ignition delay measurements and oxidation mechanism presented here for 2-butanol, iso-butanol, and tert butanol are the first of their kind.. △ Less

Submitted 10 December, 2008; originally announced December 2008.

Journal ref: J. Phys. Chem. A 112 (2008) 10843-10855

Experimental and modeling study of the low-temperature oxidation of large alkanes

Authors: Joffrey Biet, Mohammed Hichem Hakka, Valérie Warth, Pierre-Alexandre Glaude, Frédérique Battin-Leclerc

Abstract: This paper presents an experimental and modeling study of the oxidation of large linear akanes (from C10) representative from diesel fuel from low to intermediate temperature (550-1100 K) including the negative temperature coefficient (NTC) zone. The experimental study has been performed in a jet-stirred reactor at atmospheric pressure for n-decane and a n-decane/n-hexadecane blend. Detailed kin… ▽ More This paper presents an experimental and modeling study of the oxidation of large linear akanes (from C10) representative from diesel fuel from low to intermediate temperature (550-1100 K) including the negative temperature coefficient (NTC) zone. The experimental study has been performed in a jet-stirred reactor at atmospheric pressure for n-decane and a n-decane/n-hexadecane blend. Detailed kinetic mechanisms have been developed using computer-aided generation (EXGAS) with improved rules for writing reactions of primary products. These mechanisms have allowed a correct simulation of the experimental results obtained. Data from the literature for the oxidation of n-decane, in a jet-stirred reactor at 10 bar and in shock tubes, and of n-dodecane in a pressurized flow reactor have also been correctly modeled. A considerable improvement of the prediction of the formation of products is obtained compared to our previous models. Flow rates and sensitivity analyses have been performed in order to better understand the influence of reactions of primary products. A modeling comparison between linear alkanes for C8 to C16 in terms of ignition delay times and the formation of light products is also discussed. △ Less

Submitted 11 September, 2008; originally announced September 2008.

Journal ref: Energy & Fuels 22 (2008) 2258-2269

To better understand the formation of short-chain acids in combustion systems

Authors: Frédérique Battin-Leclerc, A. A. Konnov, J. L. Jaffrezo, M. Legrand

Abstract: Our study aims at a better control and understanding of the transfer of a complex [DNA supercoiled plasmid - dodecyltrimethylammonium surfactant] layer from a liquid-vapour water interface onto a silicon surface without any additional cross-linker. The production of the complexed layer and its transfer from the aqueous subphase to the substrate is achieved with a Langmuir-Blodgett device. The su… ▽ More Our study aims at a better control and understanding of the transfer of a complex [DNA supercoiled plasmid - dodecyltrimethylammonium surfactant] layer from a liquid-vapour water interface onto a silicon surface without any additional cross-linker. The production of the complexed layer and its transfer from the aqueous subphase to the substrate is achieved with a Langmuir-Blodgett device. The substrate consists of a reconstructed boron doped silicon substrate with a nanometer-scale roughness. Using X-ray photoelectron spectroscopy and atomic force microscopy measurements, it is shown that the DNA complexes are stretched in a disorderly manner throughout a 2-4 nm high net-like structure. The mechanism of transfer of this layer onto the planar surface of the semi-conductor and the parameters of the process are analysed and illustrated by atomic force microscopy snapshots. The molecular layer exhibits the typical characteristics of a spinodal decomposition pattern or dewetting features. Plasmid molecules appear like long flattened fibers covering the surface, forming holes of various shapes and areas. The cluster-cluster aggregation of the complex structure gets very much denser on the substrate edge. The supercoiled DNA plasmids undergo conformational changes and a high degree of condensation and aggregation is observed. △ Less

Submitted 17 January, 2008; originally announced January 2008.

Journal ref: Combustion Science and Technology 180 (2008) 343-370

Experimental and modeling study of the autoignition of cyclopentane

Authors: Mohammed Yahyaoui, Hichem Hakka, Pierre-Alexandre Glaude, Frédérique Battin-Leclerc

Abstract: Ignition delay times of cyclopentene-oxygen-argon mixtures were measured behind reflected shock waves. Mixtures contained 0.5 or 1 % of hydrocarbons for equivalence ratios ranging from 0.5 to 1.5. Reflected shock waves conditions were: temperatures from 1300 to 1700 K and pressures from 7 to 9 atm. When comparing to previous results obtained under similar conditions, it can be observed that the… ▽ More Ignition delay times of cyclopentene-oxygen-argon mixtures were measured behind reflected shock waves. Mixtures contained 0.5 or 1 % of hydrocarbons for equivalence ratios ranging from 0.5 to 1.5. Reflected shock waves conditions were: temperatures from 1300 to 1700 K and pressures from 7 to 9 atm. When comparing to previous results obtained under similar conditions, it can be observed that the reactivity of cyclopentene is much lower than that of cyclohexene, but very close to that of cyclopentane. A kinetic mechanism recently proposed for the combustion of cyclopentene in a flame has been used to model these results and a satisfactory agreement has been obtained. The main reaction pathways have been derived from flow rate, simulated temporal profiles of products and sensitivity analyses. △ Less

Submitted 10 December, 2007; originally announced December 2007.

Journal ref: International Journal of Chemical Kinetics 40 (2008) 25-33

Rich methane laminar flames doped with light unsaturated hydrocarbons. Part III : cyclopentene

Authors: Hadj-Ali Gueniche, Pierre-Alexandre Glaude, René Fournet, Frédérique Battin-Leclerc

Abstract: In line with the studies presented in the parts I and II of this paper, the structure of a laminar rich premixed methane flame doped with cyclopentene has been investigated. The gases of this flame contains 15.3% (molar) of methane, 26.7% of oxygen and 2.4% cyclopentene corresponding to an equivalence ratio of 1.79 and a ratio C5H8 / CH4 of 16 %. The flame has been stabilized on a burner at a pr… ▽ More In line with the studies presented in the parts I and II of this paper, the structure of a laminar rich premixed methane flame doped with cyclopentene has been investigated. The gases of this flame contains 15.3% (molar) of methane, 26.7% of oxygen and 2.4% cyclopentene corresponding to an equivalence ratio of 1.79 and a ratio C5H8 / CH4 of 16 %. The flame has been stabilized on a burner at a pressure of 6.7 kPa using argon as dilutant, with a gas velocity at the burner of 36 cm/s at 333 K. The temperature ranged from 627 K close to the burner up to 2027 K. Quantified species included usual methane C0-C2 combustion products, but also propyne, allene, propene, propane, 1-butene, 1,3-butadiene, 1,2-butadiene, vinylacetylene, diacetylene, cyclopentadiene, 1,3-pentadiene, benzene and toluene. A new mechanism for the oxidation of cyclopentene has been proposed. The main reaction pathways of consumption of cyclopentene and of formation of benzene and toluene have been derived from flow rate analyses. △ Less

Submitted 10 December, 2007; originally announced December 2007.

Journal ref: Combustion and Flame 152 (2008) 245261

Rich methane laminar flames doped with light unsaturated hydrocarbons. Part II: 1,3butadiene

Authors: Hadj-Ali Gueniche, Pierre-Alexandre Glaude, René Fournet, Frédérique Battin-Leclerc

Abstract: In line with the study presented in the part I of this paper, the structure of a laminar rich premixed methane flame doped with 1,3-butadiene has been investigated. The flame contains 20.7% (molar) of methane, 31.4% of oxygen and 3.3% of 1,3-butadiene, corresponding to an equivalence ratio of 1.8, and a ratio C4H6 / CH4 of 16 %. The flame has been stabilized on a burner at a pressure of 6.7 kPa… ▽ More In line with the study presented in the part I of this paper, the structure of a laminar rich premixed methane flame doped with 1,3-butadiene has been investigated. The flame contains 20.7% (molar) of methane, 31.4% of oxygen and 3.3% of 1,3-butadiene, corresponding to an equivalence ratio of 1.8, and a ratio C4H6 / CH4 of 16 %. The flame has been stabilized on a burner at a pressure of 6.7 kPa using argon as dilutant, with a gas velocity at the burner of 36 cm/s at 333 K. The temperature ranged from 600 K close to the burner up to 2150 K. Quantified species included usual methane C0-C2 combustion products and 1,3-butadiene, but also propyne, allene, propene, propane, 1,2-butadiene, butynes, vinylacetylene, diacetylene, 1,3-pentadiene, 2-methyl-1,3-butadiene (isoprene), 1-pentene, 3-methyl-1-butene, benzene and toluene. In order to model these new results, some improvements have been made to a mechanism previously developed in our laboratory for the reactions of C3-C4 unsaturated hydrocarbons. The main reaction pathways of consumption of 1,3-butadiene and of formation of C6 aromatic species have been derived from flow rate analyses. In this case, the C4 route to benzene formation plays an important role in comparison to the C3 pathway. △ Less

Submitted 27 September, 2007; originally announced September 2007.

Journal ref: Combustion and Flame 151 (2007) 245-261

Experimental study of the structure of rich premixed 1,3-butadiene/CH4/O2/Ar flame

Authors: Hadj-Ali Gueniche, Pierre-Alexandre Glaude, René Fournet, Frédérique Battin-Leclerc

Abstract: The structure of a laminar rich premixed 1,3-C4H6/CH4/O2/Ar flame have been investigated. 1,3-Butadiene, methane, oxygen and argon mole fractions are 0.033; 0.2073; 0.3315, and 0.4280, respectively, for an equivalent ratio of 1.80. The flame has been stabilized on a burner at a pressure of 6.7 kPa (50 Torr). The concentration profiles of stable species were measured by gas chromatography after s… ▽ More The structure of a laminar rich premixed 1,3-C4H6/CH4/O2/Ar flame have been investigated. 1,3-Butadiene, methane, oxygen and argon mole fractions are 0.033; 0.2073; 0.3315, and 0.4280, respectively, for an equivalent ratio of 1.80. The flame has been stabilized on a burner at a pressure of 6.7 kPa (50 Torr). The concentration profiles of stable species were measured by gas chromatography after sampling with a quartz probe. Quantified species included carbon monoxide and dioxide, methane, oxygen, hydrogen, ethane, ethylene, acetylene, propyne, allene, propene, cyclopropane, 1,3-butadiene, butenes, 1-butyne, vinylacetylene, diacetylene, C5 compounds, benzene, and toluene. The temperature was measured thanks to a thermocouple in PtRh (6%)-PtRh (30%) settled inside the enclosure and ranged from 900 K close to the burner up to 2100 K. △ Less

Submitted 14 June, 2007; originally announced June 2007.

Comments: traduit de Fizika Goreniya I Vzryva, 2006, 42, 89-95

Journal ref: Combustion, Explosion and Shock Waves 42 (2006) 702-706

Use of detailed kinetic mechanisms for the prediction of autoignitions

Authors: Frédéric Buda, Pierre-Alexandre Glaude, Frédérique Battin-Leclerc, Richard Porter, Kevin J. Hughes, John F. Griffiths

Abstract: This paper describes how automatically generated detailed kinetic mechanisms are obtained for the oxidation of alkanes and how these models could lead to a better understanding of autoignition and cool flame risks at elevated conditions. Examples of prediction of the occurrence of different autoignition phenomena, such as cool flames or two-stage ignitions are presented depending on the conditio… ▽ More This paper describes how automatically generated detailed kinetic mechanisms are obtained for the oxidation of alkanes and how these models could lead to a better understanding of autoignition and cool flame risks at elevated conditions. Examples of prediction of the occurrence of different autoignition phenomena, such as cool flames or two-stage ignitions are presented depending on the condition of pressure, temperature and mixture composition. Three compounds are treated, a light alkane, propane, and two heavier ones, n-heptane and n-decane. △ Less

Submitted 14 June, 2007; originally announced June 2007.

Journal ref: Journal of Loss Prevention in the Process Industries 19 (2006) 227-232

Primary reactions of the thermal decomposition of tricyclodecane

Authors: Olivier Herbinet, Baptiste Sirjean, Roda Bounaceur, René Fournet, Frédérique Battin-Leclerc, Gérard Scacchi, Paul-Marie Marquaire

Abstract: In order to better understand the thermal decomposition of polycyclanes, the pyrolysis of tricyclodecane has been studied in a jet-stirred reactor at temperatures from 848 to 933 K, for residence times between 0.5 and 6 s and at atmospheric pressure, in order to obtain a conversion between 0.01 and 25 %. The main products of the reaction are hydrogen, methane, ethylene, ethane, propene, 1,3-cycl… ▽ More In order to better understand the thermal decomposition of polycyclanes, the pyrolysis of tricyclodecane has been studied in a jet-stirred reactor at temperatures from 848 to 933 K, for residence times between 0.5 and 6 s and at atmospheric pressure, in order to obtain a conversion between 0.01 and 25 %. The main products of the reaction are hydrogen, methane, ethylene, ethane, propene, 1,3-cyclopentadiene, cyclopentene, benzene, 1,5-hexadiene, toluene and 3-cyclopentyl-cyclopentene. A primary mechanism containing all the possible initiation steps, including those involving diradicals, as well as propagation reactions has been developed and allows experimental results to be satisfactorily modeled. The main reaction pathways of consumption of tricyclodecane and of formation of the main products have been derived from flow rate and sensitivity analyses. △ Less

Submitted 14 June, 2007; originally announced June 2007.

Journal ref: J. Phys. Chem. A 110, 39 (2006) 11298-11314

Modelling of the gas-phase oxidation of cyclohexane

Authors: Frédéric Buda, Barbara Heyberger, René Fournet, Pierre-Alexandre Glaude, Valérie Warth, Frédérique Battin-Leclerc

Abstract: This paper presents a modeling study of the oxidation of cyclohexane from low to intermediate temperature (650-1050 K), including the negative temperature coefficient (NTC) zone. A detailed kinetic mechanism has been developed using computer-aided generation. This comprehensive low-temperature mechanism involves 513 species and 2446 reactions and includes two additions of cyclohexyl radicals to… ▽ More This paper presents a modeling study of the oxidation of cyclohexane from low to intermediate temperature (650-1050 K), including the negative temperature coefficient (NTC) zone. A detailed kinetic mechanism has been developed using computer-aided generation. This comprehensive low-temperature mechanism involves 513 species and 2446 reactions and includes two additions of cyclohexyl radicals to oxygen, as well as subsequent reactions. The rate constants of the reactions involving the formation of bicyclic species (isomerizations, formation of cyclic ethers) have been evaluated from literature data. This mechanism is able to satisfactorily reproduce experimental results obtained in a rapid-compression machine for temperatures ranging from 650 to 900 K and in a jet-stirred reactor from 750 to 1050 K. Flow-rate analyses have been performed at low and intermediate temperatures. △ Less

Submitted 14 June, 2007; originally announced June 2007.

Journal ref: Energy and Fuels 20 (2006) 1450-1459

Kinetic modelling of a surrogate diesel fuel applied to 3D auto-ignition in HCCI engines

Authors: Roda Bounaceur, Pierre-Alexandre Glaude, René Fournet, Frédérique Battin-Leclerc, S. Jay, A. Pires Da Cruz

Abstract: The prediction of auto-ignition delay times in HCCI engines has risen interest on detailed chemical models. This paper described a validated kinetic mechanism for the oxidation of a model Diesel fuel (n-decane and α-methylnaphthalene). The 3D model for the description of low and high temperature auto-ignition in engines is presented. The behavior of the model fuel is compared with that of n… ▽ More The prediction of auto-ignition delay times in HCCI engines has risen interest on detailed chemical models. This paper described a validated kinetic mechanism for the oxidation of a model Diesel fuel (n-decane and α-methylnaphthalene). The 3D model for the description of low and high temperature auto-ignition in engines is presented. The behavior of the model fuel is compared with that of n-heptane. Simulations show that the 3D model coupled with the kinetic mechanism can reproduce experimental HCCI and Diesel engine results and that the correct modeling of auto-ignition in the cool flame region is essential in HCCI conditions. △ Less

Submitted 14 June, 2007; originally announced June 2007.

Comments: International Journal Vehicle Design (2007) sous presse

The autoignition of cyclopentane and cyclohexane in a shock tube

Authors: Baptiste Sirjean, Frédéric Buda, Hichem Hakka, Pierre-Alexandre Glaude, René Fournet, Valérie Warth, Frédérique Battin-Leclerc

Abstract: Ignition delay times of cyclohexane-oxygen-argon and cyclopentane-oxygen-argon mixtures have been measured in a shock tube, the onset of ignition being detected by OH radical emission. Mixtures contained 0.5 or 1 % of hydrocarbon for equivalence ratios ranging from 0.5 to 2. Reflected shock waves allowed temperatures from 1230 to 1800 K and pressures from 7.3 to 9.5 atm to be obtained. These mea… ▽ More Ignition delay times of cyclohexane-oxygen-argon and cyclopentane-oxygen-argon mixtures have been measured in a shock tube, the onset of ignition being detected by OH radical emission. Mixtures contained 0.5 or 1 % of hydrocarbon for equivalence ratios ranging from 0.5 to 2. Reflected shock waves allowed temperatures from 1230 to 1800 K and pressures from 7.3 to 9.5 atm to be obtained. These measurements have shown that cyclopentane is much less reactive than cyclohexane, as for a given temperature the observed autoignition delay times were about ten times higher for the C5 compound compared to the C6. Detailed mechanisms for the combustion of cyclohexane and cyclopentane have been proposed to reproduce these results. The elementary steps included in the kinetic models of the oxidation of cyclanes are close to those proposed to describe the oxidation of acyclic alkanes and alkenes. Consequently, it has been possible to obtain these models by using an improved version of software EXGAS, a computer package developed to perform the automatic generation of detailed kinetic models for the gas-phase oxidation and combustion of linear and branched alkanes and alkenes. Nevertheless, the modelling of the oxidation of cyclanes requires to consider new types of generic reactions, and especially to define new correlations for the estimation of the rate constants. Ab initio calculations have been used to better know some of the rate constants used in the case of cyclopentane. The main reaction pathways have been derived from flow rate and sensitivity analyses. △ Less

Submitted 14 June, 2007; originally announced June 2007.

Journal ref: PROCEEDINGS OF THE COMBUSTION INSTITUTE 31 (2007) 277-284

Thermal stability of n-dodecane : experiments and kinetic modelling

Authors: Olivier Herbinet, Paul-Marie Marquaire, Frédérique Battin-Leclerc, René Fournet

Abstract: The thermal decomposition of n-dodecane, a component of some jet fuels, has been studied in a jet-stirred reactor at temperatures from 793 to 1093 K, for residence times between 1 and 5 s and at atmospheric pressure. Thermal decomposition of hydrocarbon fuel prior the entrance in the combustion chamber is an envisaged way to cool the wall of hypersonic vehicles. The products of the reaction are… ▽ More The thermal decomposition of n-dodecane, a component of some jet fuels, has been studied in a jet-stirred reactor at temperatures from 793 to 1093 K, for residence times between 1 and 5 s and at atmospheric pressure. Thermal decomposition of hydrocarbon fuel prior the entrance in the combustion chamber is an envisaged way to cool the wall of hypersonic vehicles. The products of the reaction are mainly hydrogen, methane, ethane, 1,3-butadiene and 1-alkenes from ethylene to 1-undecene. For higher temperatures and residence times acetylene, allene, propyne, cyclopentene, 1,3-cyclopentadiene and aromatic compounds from benzene to pyrene through naphthalene have also been observed. A previous detailed kinetic model of the thermal decomposition of n-dodecane generated using EXGAS software has been improved and completed by a sub-mechanism explaining the formation and the consumption of aromatic compounds. △ Less

Submitted 14 June, 2007; originally announced June 2007.

Journal ref: J. Anal. Appl. Pyrol. 78 (2007) 419-429

Thermal decomposition of norbornane (bicyclo[2.2.1]heptane) dissolved in benzene. Experimental study and mechanism investigation

Authors: Olivier Herbinet, Baptiste Sirjean, Frédérique Battin-Leclerc, René Fournet, Paul-Marie Marquaire

Abstract: The thermal decomposition of norbornane (dissolved in benzene) has been studied in a jet stirred reactor at temperatures between 873 and 973 K, at residence times ranging from 1 to 4 s and at atmospheric pressure, leading to conversions from 0.04 to 22.6%. 25 reaction products were identified and quantified by gas chromatography, amongst which the main ones are hydrogen, ethylene and 1,3-cyclope… ▽ More The thermal decomposition of norbornane (dissolved in benzene) has been studied in a jet stirred reactor at temperatures between 873 and 973 K, at residence times ranging from 1 to 4 s and at atmospheric pressure, leading to conversions from 0.04 to 22.6%. 25 reaction products were identified and quantified by gas chromatography, amongst which the main ones are hydrogen, ethylene and 1,3-cyclopentadiene. A mechanism investigation of the thermal decomposition of the norbornane - benzene binary mixture has been performed. Reactions involved in the mechanism have been reviewed: unimolecular initiations 1 by C-C bond scission of norbornane, fate of the generated diradicals, reactions of transfer and propagation of norbornyl radicals, reactions of benzene and cross-coupling reactions. △ Less

Submitted 5 April, 2007; originally announced April 2007.

Journal ref: Energy and Fuels (2007) sous presse

Rich methane premixed laminar flames doped by light unsaturated hydrocarbons - Part I : allene and propyne

Authors: Hadj-Ali Gueniche, Pierre-Alexandre Glaude, Guillaume Dayma, René Fournet, Frédérique Battin-Leclerc

Abstract: The structure of three laminar premixed rich flames has been investigated: a pure methane flame and two methane flames doped by allene and propyne, respectively. The gases of the three flames contain 20.9% (molar) of methane and 33.4% of oxygen, corresponding to an equivalence ratio of 1.25 for the pure methane flame. In both doped flames, 2.49% of C3H4 was added, corresponding to a ratio C3H4/C… ▽ More The structure of three laminar premixed rich flames has been investigated: a pure methane flame and two methane flames doped by allene and propyne, respectively. The gases of the three flames contain 20.9% (molar) of methane and 33.4% of oxygen, corresponding to an equivalence ratio of 1.25 for the pure methane flame. In both doped flames, 2.49% of C3H4 was added, corresponding to a ratio C3H4/CH4 of 12% and an equivalence ratio of 1.55. The three flames have been stabilized on a burner at a pressure of 6.7 kPa using argon as dilutant, with a gas velocity at the burner of 36 cm/s at 333 K. The concentration profiles of stable species were measured by gas chromatography after sampling with a quartz microprobe. Quantified species included carbon monoxide and dioxide, methane, oxygen, hydrogen, ethane, ethylene, acetylene, propyne, allene, propene, propane, 1,2-butadiene, 1,3-butadiene, 1-butene, isobutene, 1-butyne, vinylacetylene, and benzene. The temperature was measured using a PtRh (6%)-PtRh (30%) thermocouple settled inside the enclosure and ranged from 700 K close to the burner up to 1850 K. In order to model these new results, some improvements have been made to a mechanism previously developed in our laboratory for the reactions of C3-C4 unsaturated hydrocarbons. The main reaction pathways of consumption of allene and propyne and of formation of C6 aromatic species have been derived from flow rate analyses. △ Less

Submitted 3 April, 2007; originally announced April 2007.

Journal ref: Combustion and Flame 146 (2006) 620-634

Experimental and modeling study of the autoignition of 1-hexene/iso-octane mixtures at low temperatures

Authors: Guillaume Vanhove, Rodolphe Minetti, Sylvain Touchard, René Fournet, Pierre-Alexandre Glaude, Frédérique Battin-Leclerc

Abstract: Autoignition delay times have been measured in a rapid compression machine at Lille at temperatures after compression from 630 to 840 K, pressures from 8 to 14 bar, Φ= 1 and for a iso octane/1 hexene mixture containing 82% iso-octane and 18% 1 hexene. Results have shown that this mixture is strongly more reactive than pure iso-octane, but less reactive than pure 1 hexene. It exhibits a classical… ▽ More Autoignition delay times have been measured in a rapid compression machine at Lille at temperatures after compression from 630 to 840 K, pressures from 8 to 14 bar, Φ= 1 and for a iso octane/1 hexene mixture containing 82% iso-octane and 18% 1 hexene. Results have shown that this mixture is strongly more reactive than pure iso-octane, but less reactive than pure 1 hexene. It exhibits a classical low temperature behaviour, with the appearance of cool flame and a negative temperature coefficient region. The composition of the reactive mixture obtained after the cool flame has also been determined. A detailed kinetic model has been obtained by using the system EXGAS, developed in Nancy for the automatic generation of kinetic mechanisms, and an acceptable agreement with the experimental results has been obtained both for autoignition delay times and for the distribution of products. A flow rate analysis reveals that the crossed reactions between species coming from both reactants (like H-abstractions or combinations) are negligible in the main flow consumption of the studied hydrocarbons. The ways of formation of the main primary products observed and the most sensitive rate constants have been identified. △ Less

Submitted 28 March, 2006; originally announced March 2006.

Journal ref: Combustion and Flame 145 (2006) 272-281

Experimental and modeling study of the oxidation of xylenes

Authors: Frédérique Battin-Leclerc, Roda Bounaceur, Pierre-Alexandre Glaude, Najib Belmekki

Abstract: This paper describes an experimental and modeling study of the oxidation of the three isomers of xylene (ortho-, meta- and para-xylenes). For each compound, ignition delay times of hydrocarbon-oxygen-argon mixtures with fuel equivalence ratios from 0.5 to 2 were measured behind reflected shock waves for temperatures from 1330 to 1800 K and pressures from 6.7 to 9 bar. The results show a similar… ▽ More This paper describes an experimental and modeling study of the oxidation of the three isomers of xylene (ortho-, meta- and para-xylenes). For each compound, ignition delay times of hydrocarbon-oxygen-argon mixtures with fuel equivalence ratios from 0.5 to 2 were measured behind reflected shock waves for temperatures from 1330 to 1800 K and pressures from 6.7 to 9 bar. The results show a similar reactivity for the three isomers. A detailed kinetic mechanism has been proposed, which reproduces our experimental results, as well as some literature data obtained in a plug flow reactor at 1155 K showing a clear difference of reactivity between the three isomers of xylene. The main reaction paths have been determined by sensitivity and flux analyses and have allowed the differences of reactivity to be explained. △ Less

Submitted 13 March, 2006; originally announced March 2006.