Showing 1–7 of 7 results for author: Barr, B W

Use of Bayesian Inference to Diagnose Issues in Experimental Measurements of Mechanical Disk Resonators

Authors: Simon C. Tait, Michael J. Williams, Joseph Bayley, Bryan W. Barr, Iain Martin

Abstract: Gravitational wave detectors, such as LIGO, are predominantly limited by coating Brownian thermal noise (CTN), arising from mechanical losses in the Bragg mirror coatings used on test-mass optics. Accurately characterizing and minimizing these losses is crucial for enhancing detector sensitivity. This paper introduces a general mathematical and statistical framework leveraging Bayesian inference t… ▽ More Gravitational wave detectors, such as LIGO, are predominantly limited by coating Brownian thermal noise (CTN), arising from mechanical losses in the Bragg mirror coatings used on test-mass optics. Accurately characterizing and minimizing these losses is crucial for enhancing detector sensitivity. This paper introduces a general mathematical and statistical framework leveraging Bayesian inference to precisely analyse mechanical ring-down measurements of disk resonators, a standard method for quantifying mechanical loss in coating materials. Our approach presents a refined model that fully captures the non-linear behaviour of beam spot motion on split photodiode sensors, significantly improving upon traditional simplified exponential-decay methods. We achieve superior estimation accuracy for decay constants ($τ_1$ and $τ_2$), especially for measurements exhibiting larger oscillation amplitudes. Specifically, we observe improvements in estimation accuracy by up to 25$\%$ over traditional methods, with strong Bayesian evidence favouring our framework. Our simulations and experimental validations reveal that previously discarded measurements due to fitting inaccuracies can now be reliably analysed, maximizing the use of available data. This enhanced analytical capability not only provides more precise mechanical loss estimations but also offers deeper insights into systematic issues affecting disk resonator measurements, paving the way toward improved coating materials and ultimately, more sensitive gravitational wave detectors. △ Less

Submitted 22 May, 2025; originally announced May 2025.

Experimental investigation of the limitations of polarisation optics for future gravitational wave detectors based on the polarisation Sagnac speedmeter

Authors: A. P Spencer, B. W Barr, A. S. Bell, J. Briggs, P. Dupej, S. H. Huttner, B. Sorazu, J. Wright, K. A. Strain

Abstract: The polarisation Sagnac speedmeter interferometer has the potential to replace the Michelson interferometer as the instrumental basis for future generations of ground-based gravitational wave detectors. The quantum noise benefit of this speedmeter is dependent on high-quality polarisation optics, the polarisation beam-splitter (PBS) and quarter-waveplate (QWP) optics that are key to this detector… ▽ More The polarisation Sagnac speedmeter interferometer has the potential to replace the Michelson interferometer as the instrumental basis for future generations of ground-based gravitational wave detectors. The quantum noise benefit of this speedmeter is dependent on high-quality polarisation optics, the polarisation beam-splitter (PBS) and quarter-waveplate (QWP) optics that are key to this detector configuration and careful consideration of the effect of birefringence in the arm cavities of the interferometer. A PBS with an extinction ratio of better than 4000 in transmission and 700 in reflection for a $41^{\circ}$ angle of incidence was characterised along with a QWP of birefringence of $\fracλ{4} + \fracλ{324}$. The cavity mirror optics of a 10m prototype polarisation Sagnac speedmeter were measured to have birefringence in the range $1\times10^{-3}$ to $2\times10^{-5}$ radians. This level of birefringence, along with the QWP imperfections, can be canceled out by careful adjustment of the QWP angle, to the extent that the extinction ratio of the PBS is the leading limitation for the polarisation Sagnac speedmeter in terms of polarisation effects. △ Less

Submitted 17 August, 2021; originally announced August 2021.

Demonstration of a switchable damping system to allow low-noise operation of high-Q low-mass suspension systems

Authors: Jan-Simon Hennig, Bryan W. Barr, Angus S. Bell, William Cunningham, Stefan L. Danilishin, Peter Dupej, Christian Graef, Sabina H. Huttner, Russell Jones, Sean S. Leavey, Daniela Pascucci, Martin Sinclair, Borja Sorazu, Andrew Spencer, Sebastian Steinlechner, Kenneth A. Strain, Jennifer Wright, Teng Zhang, Stefan Hild

Abstract: Low mass suspension systems with high-Q pendulum stages are used to enable quantum radiation pressure noise limited experiments. Utilising multiple pendulum stages with vertical blade springs and materials with high quality factors provides attenuation of seismic and thermal noise, however damping of these high-Q pendulum systems in multiple degrees of freedom is essential for practical implementa… ▽ More Low mass suspension systems with high-Q pendulum stages are used to enable quantum radiation pressure noise limited experiments. Utilising multiple pendulum stages with vertical blade springs and materials with high quality factors provides attenuation of seismic and thermal noise, however damping of these high-Q pendulum systems in multiple degrees of freedom is essential for practical implementation. Viscous damping such as eddy-current damping can be employed but introduces displacement noise from force noise due to thermal fluctuations in the damping system. In this paper we demonstrate a passive damping system with adjustable damping strength as a solution for this problem that can be used for low mass suspension systems without adding additional displacement noise in science mode. We show a reduction of the damping factor by a factor of 8 on a test suspension and provide a general optimisation for this system. △ Less

Submitted 25 October, 2017; v1 submitted 24 October, 2017; originally announced October 2017.

Comments: 5 pages, 5 figures

Journal ref: Phys. Rev. D 96, 122005 (2017)

Local-Oscillator Noise Coupling in Balanced Homodyne Readout for Advanced Gravitational Wave Detectors

Authors: Sebastian Steinlechner, Bryan W Barr, Angus S Bell, Stefan L Danilishin, Andreas Gläfke, Christian Gräf, Jan-Simon Hennig, E Alasdair Houston, Sabina H Huttner, Sean S Leavey, Daniela Pascucci, Borja Sorazu, Andrew Spencer, Kenneth A Strain, Jennifer Wright, Stefan Hild

Abstract: The second generation of interferometric gravitational wave detectors are quickly approaching their design sensitivity. For the first time these detectors will become limited by quantum back-action noise. Several back-action evasion techniques have been proposed to further increase the detector sensitivity. Since most proposals rely on a flexible readout of the full amplitude- and phase-quadrature… ▽ More The second generation of interferometric gravitational wave detectors are quickly approaching their design sensitivity. For the first time these detectors will become limited by quantum back-action noise. Several back-action evasion techniques have been proposed to further increase the detector sensitivity. Since most proposals rely on a flexible readout of the full amplitude- and phase-quadrature space of the output light field, balanced homodyne detection is generally expected to replace the currently used DC readout. Up to now, little investigation has been undertaken into how balanced homodyne detection can be successfully transferred from its ubiquitous application in table-top quantum optics experiments to large-scale interferometers with suspended optics. Here we derive implementation requirements with respect to local oscillator noise couplings and highlight potential issues with the example of the Glasgow Sagnac Speed Meter experiment, as well as for a future upgrade to the Advanced LIGO detectors. △ Less

Submitted 24 June, 2015; originally announced June 2015.

Comments: 7 pages, 5 figures

Journal ref: Phys. Rev. D 92, 072009 (2015)

Upper Limit to the Transverse to Longitudinal Motion Coupling of a Waveguide Mirror

Authors: S. Leavey, B. W. Barr, A. S. Bell, E-B. Kley, N. Gordon, C. Gräf, S. Hild, S. H. Huttner, S. Kroker, J. Macarthur, C. Messenger, M. Pitkin, B. Sorazu, K. Strain, A. Tünnermann

Abstract: Waveguide mirrors possess nano-structured surfaces which can potentially provide a significant reduction in thermal noise over conventional dielectric mirrors. To avoid introducing additional phase noise from motion of the mirror transverse to the reflected light, however, they must possess a mechanism to suppress the phase effects associated with the incident light translating across the nano-str… ▽ More Waveguide mirrors possess nano-structured surfaces which can potentially provide a significant reduction in thermal noise over conventional dielectric mirrors. To avoid introducing additional phase noise from motion of the mirror transverse to the reflected light, however, they must possess a mechanism to suppress the phase effects associated with the incident light translating across the nano-structured surface. It has been shown that with carefully chosen parameters this additional phase noise can be suppressed. We present an experimental measurement of the coupling of transverse to longitudinal displacements in such a waveguide mirror designed for 1064 nm light. We place an upper limit on the level of measured transverse to longitudinal coupling of one part in seventeen thousand with 95% confidence, representing a significant improvement over a previously measured grating mirror. △ Less

Submitted 10 August, 2015; v1 submitted 6 October, 2014; originally announced October 2014.

Journal ref: Class. Quantum Grav. 32 (2015) 175005

Design of a speed meter interferometer proof-of-principle experiment

Authors: C. Gräf, B. W. Barr, A. S. Bell, F. Campbell, A. V. Cumming, S. L. Danilishin, N. A. Gordon, G. D. Hammond, J. Hennig, E. A. Houston, S. H. Huttner, R. A. Jones, S. S. Leavey, H. Lück, J. Macarthur, M. Marwick, S. Rigby, R. Schilling, B. Sorazu, A. Spencer, S. Steinlechner, K. A. Strain, S. Hild

Abstract: The second generation of large scale interferometric gravitational wave detectors will be limited by quantum noise over a wide frequency range in their detection band. Further sensitivity improvements for future upgrades or new detectors beyond the second generation motivate the development of measurement schemes to mitigate the impact of quantum noise in these instruments. Two strands of develo… ▽ More The second generation of large scale interferometric gravitational wave detectors will be limited by quantum noise over a wide frequency range in their detection band. Further sensitivity improvements for future upgrades or new detectors beyond the second generation motivate the development of measurement schemes to mitigate the impact of quantum noise in these instruments. Two strands of development are being pursued to reach this goal, focusing both on modifications of the well-established Michelson detector configuration and development of different detector topologies. In this paper, we present the design of the world's first Sagnac speed meter interferometer which is currently being constructed at the University of Glasgow. With this proof-of-principle experiment we aim to demonstrate the theoretically predicted lower quantum noise in a Sagnac interferometer compared to an equivalent Michelson interferometer, to qualify Sagnac speed meters for further research towards an implementation in a future generation large scale gravitational wave detector, such as the planned Einstein Telescope observatory. △ Less

Submitted 11 September, 2014; v1 submitted 12 May, 2014; originally announced May 2014.

Comments: Revised version: 16 pages, 6 figures

Journal ref: Class. Quantum Grav. 31 215009 (2014)

Waveguide grating mirror in a fully suspended 10 meter Fabry-Perot cavity

Authors: Daniel Friedrich, Bryan W. Barr, Frank Brückner, Stefan Hild, John Nelson, John Mcarthur, Michael V. Plissi, Matthew P. Edgar, Sabina H. Huttner, Borja Sorazu, Stefanie Kroker, Michael Britzger, Ernst-Bernhard Kley, Karsten Danzmann, Andreas Tünnermann, Ken A. Strain, Roman Schnabel

Abstract: We report on the first demonstration of a fully suspended 10m Fabry-Perot cavity incorporating a waveguide grating as the coupling mirror. The cavity was kept on resonance by reading out the length fluctuations via the Pound-Drever-Hall method and employing feedback to the laser frequency. From the achieved finesse of 790 the grating reflectivity was determined to exceed 99.2% at the laser wavelen… ▽ More We report on the first demonstration of a fully suspended 10m Fabry-Perot cavity incorporating a waveguide grating as the coupling mirror. The cavity was kept on resonance by reading out the length fluctuations via the Pound-Drever-Hall method and employing feedback to the laser frequency. From the achieved finesse of 790 the grating reflectivity was determined to exceed 99.2% at the laser wavelength of 1064\,nm, which is in good agreement with rigorous simulations. Our waveguide grating design was based on tantala and fused silica and included a ~20nm thin etch stop layer made of Al2O3 that allowed us to define the grating depth accurately during the fabrication process. Demonstrating stable operation of a waveguide grating featuring high reflectivity in a suspended low-noise cavity, our work paves the way for the potential application of waveguide gratings as mirrors in high-precision interferometry, for instance in future gravitational wave observatories. △ Less

Submitted 14 April, 2011; originally announced April 2011.