-
Metasurface Dome for Above-the-Horizon Grating Lobes Reduction in 5G-NR Systems
Authors:
Davide Ramaccia,
Mirko Barbuto,
Alessio Monti,
Stefano Vellucci,
Claudio Massagrande,
Alessandro Toscano,
Filiberto Bilotti
Abstract:
The use of 5G New Radio (NR) spectrum around 26 GHz is currently raising the quest on its compatibility with the well-established Earth Exploration-Satellite Service (EESS), which may be blinded by the spurious radiation emitted Above-the-Horizon (AtH) by Base Station (BS) antennas. Indeed, AtH grating lobes are often present during cell scanning due to the large inter-element spacing in BS array…
▽ More
The use of 5G New Radio (NR) spectrum around 26 GHz is currently raising the quest on its compatibility with the well-established Earth Exploration-Satellite Service (EESS), which may be blinded by the spurious radiation emitted Above-the-Horizon (AtH) by Base Station (BS) antennas. Indeed, AtH grating lobes are often present during cell scanning due to the large inter-element spacing in BS array antennas for achieving higher gains with a reduced number of RF chains. In this letter, we propose an approach based on an electrically thin metasurface-based dome for the reduction of AtH grating lobes in 5G-NR BS antennas. The proposed scanning range shifting approach exploits the natural lower amplitude of the grating lobes when the antenna array scans in an angular region closer to the broadside direction. The grating lobe reduction is here demonstrated considering a 1x4 phased linear antenna array operating under dual-liner 45deg-slant polarization. A simple design procedure for designing the metasurface dome is reported, together with the antenna performances, evaluated through a proper set of numerical experiments. It is shown that the grating lobe radiation towards the satellite region is significantly reduced, whereas the overall insertion loss is moderate.
△ Less
Submitted 5 February, 2025;
originally announced February 2025.
-
Passive Time-Varying Waveform-Selective Metasurfaces for Attainment of Magnetic Property Control
Authors:
Yuki Kunitomo,
Kairi Takimoto,
Stefano Vellucci,
Alessio Monti,
Mirko Barbuto,
Alessandro Toscano,
Filiberto Bilotti,
Hiroki Wakatsuchi
Abstract:
We present circuit-loaded metasurfaces that behave differently in a passive manner even at the same frequency in accordance with the incoming waveform, specifically, its pulse width. Importantly, the time-varying waveform-selective metasurfaces reported thus far were mostly able to change their electric properties but not their magnetic properties; this severely limited the design range of their c…
▽ More
We present circuit-loaded metasurfaces that behave differently in a passive manner even at the same frequency in accordance with the incoming waveform, specifically, its pulse width. Importantly, the time-varying waveform-selective metasurfaces reported thus far were mostly able to change their electric properties but not their magnetic properties; this severely limited the design range of their corresponding wave impedances and refractive indices and thus hindered the development of potential applications in antennas, sensors, imagers, signal processing, and wireless communications. In this study, passive time-varying waveform-selective metasurfaces were found to attain magnetic property control by introducing an additional circuit-loaded layer that generated an artificial magnetic dipole moment; this magnetic moment only occurred during the designed pulse duration in the time domain. Our proposed concept and structures were validated numerically and experimentally; thus, our results could be used to address electromagnetic and related issues sharing the same frequency component via the variation of the pulse width as an additional degree of freedom.
△ Less
Submitted 25 July, 2024;
originally announced August 2024.
-
Design of reconfigurable Huygens metasurfaces based on Drude-like scatterers operating in the epsilon-negative regime
Authors:
Alessio Monti,
Stefano Vellucci,
Mirko Barbuto,
Luca Stefanini,
Davide Ramaccia,
Alessandro Toscano,
Filiberto Bilotti
Abstract:
In this study, we investigate the feasibility of designing reconfigurable transmitting metasurfaces through the use of Drude-like scatterers with purely electric response. Theoretical and numerical analyses are provided to demonstrate that the response of spherical Drude-like scatterers can be tailored to achieve complete transmission, satisfying a generalized Kerker's condition at half of their p…
▽ More
In this study, we investigate the feasibility of designing reconfigurable transmitting metasurfaces through the use of Drude-like scatterers with purely electric response. Theoretical and numerical analyses are provided to demonstrate that the response of spherical Drude-like scatterers can be tailored to achieve complete transmission, satisfying a generalized Kerker's condition at half of their plasma frequency. This phenomenon, which arises from the co-excitation of the electric dipole and the electric quadrupole within the scatterer, also exhibits moderate broadband performance. Subsequently, we present the application of these particles as meta-atoms in the design of reconfigurable multipolar Huygens metasurfaces, outlining the technical prerequisites for achieving effective beam-steering capabilities. Finally, we explore a plausible implementation of these low-loss Drude-like scatterers at microwave frequencies using plasma discharges. Our findings propose an alternative avenue for Huygens metasurface designs, distinct from established approaches relying on dipolar meta-atoms or on core-shell geometries. Unlike these conventional methods, our approach fosters seamless integration of reconfigurability strategies in beam-steering devices.
△ Less
Submitted 22 March, 2024;
originally announced April 2024.
-
Phase-Gradient Huygens Metasurface Coatings for Dynamic Beamforming in Linear Antennas
Authors:
Stefano Vellucci,
Michela Longhi,
Alessio Monti,
Mirko Barbuto,
Alessandro Toscano,
Filiberto Bilotti
Abstract:
The beamforming capabilities of conformal cylindrical Huygens metasurface (HMS) coatings for linear antennas are assessed. It is shown that by engineering the phase-gradient profile of the HMS, the original omnidirectional radiation pattern of the linear antenna can be shaped to form multi- or single-beam configurations. A closed-form expression for the phase-insertion profile of the cylindrical c…
▽ More
The beamforming capabilities of conformal cylindrical Huygens metasurface (HMS) coatings for linear antennas are assessed. It is shown that by engineering the phase-gradient profile of the HMS, the original omnidirectional radiation pattern of the linear antenna can be shaped to form multi- or single-beam configurations. A closed-form expression for the phase-insertion profile of the cylindrical coating required to achieve the desired radiation pattern profile is derived, and several full-wave numerical examples supporting our claims are reported. A configuration exploiting a realistic HMS layout is also discussed and it is shown that, by making the metasurface reconfigurable through the use of tunable lumped elements, the radiated beams can be dynamically steered in space. This new design methodology could find application in smart electromagnetic environment scenarios for dynamically rerouting the signal towards multiple users.
△ Less
Submitted 18 March, 2023;
originally announced March 2023.
-
Quadratic-Gradient Metasurface-Dome for Wide-Angle Beam Steering Phased Array with Reduced Gain-Loss at Broadside
Authors:
Alessio Monti,
Stefano Vellucci,
Mirko Barbuto,
Davide Ramaccia,
Michela Longhi,
Claudio Massagrande,
Alessandro Toscano,
Filiberto Bilotti
Abstract:
The quest for increasing the scanning range of a phased array is a challenging task for antenna engineers, and its solution could lead to significant advances in different applicative scenarios, ranging from 5G and beyond 5G communications to radar and satellite systems. For this purpose, the use of a deflecting meta-dome is one of the most promising solutions recently proposed that, however, stil…
▽ More
The quest for increasing the scanning range of a phased array is a challenging task for antenna engineers, and its solution could lead to significant advances in different applicative scenarios, ranging from 5G and beyond 5G communications to radar and satellite systems. For this purpose, the use of a deflecting meta-dome is one of the most promising solutions recently proposed that, however, still presents some inherent limitations, such as the significant reduction of the broadside gain of the array, due to the diverging effect of the dome, as well as the complexity of the implementation due to the need of a continuous phase profile. In this framework, the paper aims at proposing some technical solutions for maximizing the meta-dome performance and relaxing the implementation complexity. In particular, by properly discretizing and engineering the phase profile along the dome and by taking into account the different angles of incidence onto the meta-cells, we show how it is possible designing realistic meta-domes with reduced insertion loss at broadside, improved steering capabilities, and a reduced profile. In addition, a complete design workflow for a realistic meta-dome based on cascaded metasurfaces is presented.
△ Less
Submitted 20 December, 2022; v1 submitted 2 February, 2022;
originally announced February 2022.
-
Metasurfaces 3.0: a New Paradigm for Enabling Smart Electromagnetic Environments
Authors:
Mirko Barbuto,
Zahra Hamzavi-Zarghani,
Michela Longhi,
Alessio Monti,
Davide Ramaccia,
Stefano Vellucci,
Alessandro Toscano,
Filiberto Bilotti
Abstract:
So far, the environment has been considered as a source of fading, clutter, blockage, etc., with detrimental consequences for the efficiency and robustness of communication systems. However, the intense research developed toward beyond-5G communications is leading to a paradigm change, in which the environment is exploited as a new degree of freedom and plays an active role in achieving unpreceden…
▽ More
So far, the environment has been considered as a source of fading, clutter, blockage, etc., with detrimental consequences for the efficiency and robustness of communication systems. However, the intense research developed toward beyond-5G communications is leading to a paradigm change, in which the environment is exploited as a new degree of freedom and plays an active role in achieving unprecedented system performances. For implementing this challenging paradigm, it has been recently proposed the use of intelligent surfaces able to control almost at will the propagation of electromagnetic waves. In this framework, metasurfaces have emerged as a promising solution, thanks to their field manipulation capabilities achieved through low-cost, lightweight, and planar structures. The aim of this paper is to review some recent applications of metasurfaces and cast them in the scenario of next-generation wireless systems. In particular, we show their potentialities in overcoming some detrimental effects presented by the environment in wireless communications, and discuss their crucial role towards the practical implementation of a smart electromagnetic environment.
△ Less
Submitted 4 December, 2021;
originally announced December 2021.
-
On the Use of Nonlinear Metasurfaces for Circumventing Fundamental Limits of Mantle Cloaking for Antennas
Authors:
Stefano Vellucci,
Alessio Monti,
Mirko Barbuto,
Giacomo Oliveri,
Marco Salucci,
Alessandro Toscano,
Filiberto Bilotti
Abstract:
The aim of this communication is to investigate and demonstrate the possibility to overcome the fundamental limitations of mantle cloaking for antennas by exploiting nonlinear metasurfaces. First, we recap and give additional physical insights about the fundamental bounds that apply to the electric properties of an antenna that is made invisible at its own resonance frequency. Then, an innovative…
▽ More
The aim of this communication is to investigate and demonstrate the possibility to overcome the fundamental limitations of mantle cloaking for antennas by exploiting nonlinear metasurfaces. First, we recap and give additional physical insights about the fundamental bounds that apply to the electric properties of an antenna that is made invisible at its own resonance frequency. Then, an innovative strategy is proposed to circumvent these limits through the introduction of nonlinear elements that are able to dynamically transform the geometry of the cloaking metasurface depending on the power level of the impinging field. Different nonlinear designs are discussed, and their effectiveness is assessed through the relevant benchmark example of a half-wavelength dipole antenna able to efficiently transmit high-power signals while being invisible to low-power ones. In addition, the capability of such nonlinear mantle cloaks to enable the shaping of the radiation pattern of an antenna array depending on the power level of the received/transmitted signal is demonstrated. These innovative cloaking devices may find applications in different radiating systems enabling unprecedented functionalities.
△ Less
Submitted 6 August, 2021;
originally announced August 2021.
-
Waveform-Selective Mantle Cloaks for Intelligent Antennas
Authors:
Stefano Vellucci,
Alessio Monti,
Mirko Barbuto,
Alessandro Toscano,
Filiberto Bilotti
Abstract:
We present the design of an innovative wire antenna able to automatically hide or reveal its presence depending on the waveform of the received/transmitted signal. This unconventional behavior is achieved through the use of a novel waveform-selective cloaking metasurface exploiting a meander-like unit cell loaded with a lumped-element circuit capable to engineer the scattering of the antenna depen…
▽ More
We present the design of an innovative wire antenna able to automatically hide or reveal its presence depending on the waveform of the received/transmitted signal. This unconventional behavior is achieved through the use of a novel waveform-selective cloaking metasurface exploiting a meander-like unit cell loaded with a lumped-element circuit capable to engineer the scattering of the antenna depending on the waveform of the impinging signal. Due to the time-domain response of the lumped-element circuit, the antenna is able switching its scattering behavior when interacts with either a pulsed wave (PW) or a continuous wave (CW) signal. The proposed configuration paves the way to a new generation of cloaking devices for intelligent antenna systems, extending the concept of antenna as a device capable to sense the external environment and change its electromagnetic behavior accordingly.
△ Less
Submitted 29 December, 2020;
originally announced December 2020.
-
A Topological Design Tool for the Synthesis of Antenna Radiation Patterns
Authors:
Mirko Barbuto,
Mohammad-Ali Miri,
Andrea Alù,
Filiberto Bilotti,
Alessandro Toscano
Abstract:
Patch antennas are among the most popular radiating elements, yet their quasi-2-D structure reduces the degrees of freedom available to tailor their radiation pattern. To overcome this limitation, a possible solution consists in etching on a grounded substrate two concentric radiating elements and combining two modes (one for each element) with proper amplitude/phase relations. Although this techn…
▽ More
Patch antennas are among the most popular radiating elements, yet their quasi-2-D structure reduces the degrees of freedom available to tailor their radiation pattern. To overcome this limitation, a possible solution consists in etching on a grounded substrate two concentric radiating elements and combining two modes (one for each element) with proper amplitude/phase relations. Although this technique leads, in principle, to an infinite number of possible configurations (i.e., each patch element can support an infinite number of modes), the theoretical and experimental verifications available in the literature are limited to the first two radiating modes (TM 11 and TM 21 ) of a circular patch antenna. Recently, we have shown that the design of this circular patch can be effectively performed by exploiting the topological properties of vortex fields and, in particular, by controlling the phase singularity exhibited by the higher order right-handed circularly polarized (RHCP) TM 21 mode of the circular patch. Since the number of RHCP higher order modes of a circular patch is infinite, we can in principle deal with an arbitrary number of phase singularity points, whose combined control leads to unprecedented possibilities to shape the radiation pattern of a circular patch. In this article, we present a complete design tool to determine the number and position of phase singularity points arising when combining the RHCP modes of a circular patch antenna and, eventually, manipulate them to synthesize the required radiation pattern. As a realistic application example, we show how the proposed tool can be used to effectively design a single antenna whose radiation pattern can be properly tailored to switch between two different states, i.e., a sector and a saddle shape, widely used in base stations for mobile and satellite communications, respectively.
△ Less
Submitted 21 December, 2020;
originally announced December 2020.
-
Waveguide Components and Aperture Antennas With Frequency- and Time-Domain Selectivity Properties
Authors:
Mirko Barbuto,
Daniele Lione,
Alessio Monti,
Stefano Vellucci,
Filiberto Bilotti,
Alessandro Toscano
Abstract:
Filtering modules are essential devices of modern microwave systems given their capability to improve the signal-to-noise ratio of the received signal or to eliminate the unwanted interferences. For discriminating between different components, a filter exhibits a frequency-selective response that, however, is not able to distinguish between different signals whose spectrum falls within the passban…
▽ More
Filtering modules are essential devices of modern microwave systems given their capability to improve the signal-to-noise ratio of the received signal or to eliminate the unwanted interferences. For discriminating between different components, a filter exhibits a frequency-selective response that, however, is not able to distinguish between different signals whose spectrum falls within the passband of the filter itself. In this regard, some electromagnetic structures exhibiting, at the same frequency, different responses depending on the waveform of the incoming waves have been recently proposed. In this communication, we extend the aforementioned approach to the case of a standard waveguide filtering module. In particular, by loading a bandpass filtering iris with a proper lumped-element circuit, we design a waveguide component able to distinguish between different pulsed waves, even at the same frequency, depending on their pulsewidth. Moreover, by using this filter for capping an open-ended rectangular waveguide, a radiating element with both frequency- and time-domain selectivity properties is presented. The structures discussed in this communication may pave the way to a new class of microwave systems that, being both frequency selective and time selective, are less sensitive to noise and interferences.
△ Less
Submitted 21 December, 2020;
originally announced December 2020.
