Showing 1–39 of 39 results for author: Bao, S

Circulating tumor cell detection in cancer patients using in-flow deep learning holography

Authors: Kevin Mallery, Nathaniel R. Bristow, Nicholas Heller, Yash Travadi, Ali Arafa, Kaylee Kamalanathan, Catalina Galeano-Garces, Mahdi Ahmadi, Grant Schaap, Alexa Hesch, Olivia Hedeen, Zikora Izuora, Joel Hapke, Jeffrey Miller, Arjun Viswanathan, Ivo Babris, Songyi Bae, Tuan Le, Tony Clacko, Emmanuel S. Antonarakis, Badrinath R. Konety, Justin M. Drake, Jiarong Hong

Abstract: Circulating tumor cells (CTCs) are cancer cells found in the bloodstream that serve as biomarkers for early cancer detection, prognostication, and disease monitoring. However, CTC detection remains challenging due to low cell abundance and heterogeneity. Digital holographic microscopy (DHM) offers a promising, label-free method for high-throughput CTC identification by capturing superior morpholog… ▽ More Circulating tumor cells (CTCs) are cancer cells found in the bloodstream that serve as biomarkers for early cancer detection, prognostication, and disease monitoring. However, CTC detection remains challenging due to low cell abundance and heterogeneity. Digital holographic microscopy (DHM) offers a promising, label-free method for high-throughput CTC identification by capturing superior morphological information compared to traditional imaging methods, while remaining compatible with in-flow data acquisition. We present a streamlined DHM-based system that integrates microfluidic enrichment with deep learning-driven image analysis, supplemented by immunofluorescent profiling, to improve the sensitivity and specificity of CTC enumeration. Specifically, our platform combines inertial microfluidic preprocessing with dual-modality imaging, integrating holography with fluorescence sensing of up to two markers. A deep learning model, trained on a diverse set of healthy blood samples and cancer cell lines, and executed in real-time, provides a morphological confidence on a cell-by-cell basis that may then be combined with immunofluorescence criteria for enumeration. In a pilot study, we demonstrate significantly higher CTC counts in patients with late-stage prostate cancer (n=13) compared to healthy controls (n=8), with a patient-level false positive rate of 1 cell/mL. Notably, nearly two-thirds of identified CTCs were EpCAM-negative but PSMA positive (a prostate specific epithelial marker), suggesting that traditional use of EpCAM as an epithelial marker for CTCs may lead to false negatives. These findings highlight the potential of DHM for applications including but not limited to screening, diagnostics, and precision oncology. △ Less

Submitted 9 July, 2025; originally announced July 2025.

Comments: 35 pages, 10 figures, 5 tables

Learning and Testing Inverse Statistical Problems For Interacting Systems Undergoing Phase Transition

Authors: Stefano Bae, Dario Bocchi, Luca Maria Del Bono, Luca Leuzzi

Abstract: Inverse problems arise in situations where data is available, but the underlying model is not. It can therefore be necessary to infer the parameters of the latter starting from the former. Statistical mechanics offers a toolbox of techniques to address this challenge. In this work, we illustrate three of the main methods: the Maximum Likelihood, Maximum Pseudo-Likelihood, and Mean-Field approaches… ▽ More Inverse problems arise in situations where data is available, but the underlying model is not. It can therefore be necessary to infer the parameters of the latter starting from the former. Statistical mechanics offers a toolbox of techniques to address this challenge. In this work, we illustrate three of the main methods: the Maximum Likelihood, Maximum Pseudo-Likelihood, and Mean-Field approaches. We begin with a thorough theoretical introduction to these methods, followed by their application to inference in several well-known statistical physics systems undergoing phase transitions. Namely, we consider the ordered and disordered Ising models, the vector Potts model, and the Blume-Capel model on both regular lattices and random graphs. This discussion is accompanied by a GitHub repository that allows users to both reproduce the results and experiment with new systems. △ Less

Submitted 3 July, 2025; originally announced July 2025.

Comments: 34 pages, 17 figures

Fourier-Based 3D Multistage Transformer for Aberration Correction in Multicellular Specimens

Authors: Thayer Alshaabi, Daniel E. Milkie, Gaoxiang Liu, Cyna Shirazinejad, Jason L. Hong, Kemal Achour, Frederik Görlitz, Ana Milunovic-Jevtic, Cat Simmons, Ibrahim S. Abuzahriyeh, Erin Hong, Samara Erin Williams, Nathanael Harrison, Evan Huang, Eun Seok Bae, Alison N. Killilea, David G. Drubin, Ian A. Swinburne, Srigokul Upadhyayula, Eric Betzig

Abstract: High-resolution tissue imaging is often compromised by sample-induced optical aberrations that degrade resolution and contrast. While wavefront sensor-based adaptive optics (AO) can measure these aberrations, such hardware solutions are typically complex, expensive to implement, and slow when serially mapping spatially varying aberrations across large fields of view. Here, we introduce AOViFT (Ada… ▽ More High-resolution tissue imaging is often compromised by sample-induced optical aberrations that degrade resolution and contrast. While wavefront sensor-based adaptive optics (AO) can measure these aberrations, such hardware solutions are typically complex, expensive to implement, and slow when serially mapping spatially varying aberrations across large fields of view. Here, we introduce AOViFT (Adaptive Optical Vision Fourier Transformer) -- a machine learning-based aberration sensing framework built around a 3D multistage Vision Transformer that operates on Fourier domain embeddings. AOViFT infers aberrations and restores diffraction-limited performance in puncta-labeled specimens with substantially reduced computational cost, training time, and memory footprint compared to conventional architectures or real-space networks. We validated AOViFT on live gene-edited zebrafish embryos, demonstrating its ability to correct spatially varying aberrations using either a deformable mirror or post-acquisition deconvolution. By eliminating the need for the guide star and wavefront sensing hardware and simplifying the experimental workflow, AOViFT lowers technical barriers for high-resolution volumetric microscopy across diverse biological samples. △ Less

Submitted 23 May, 2025; v1 submitted 16 March, 2025; originally announced March 2025.

Comments: 55 pages, 6 figures, 26 si figures, 8 si tables

Parameter optimization of Josephson parametric amplifiers using a heuristic search algorithm for axion haloscope search

Authors: Younggeun Kim, Junu Jeong, SungWoo Youn, Sungjae Bae, Arjan F. van Loo, Yasunobu Nakamura, Sergey Uchaikin, Yannis K. Semertzidis

Abstract: The cavity haloscope is among the most widely adopted experimental platforms designed to detect dark matter axions with its principle relying on the conversion of axions into microwave photons in the presence of a strong magnetic field. The Josephson parametric amplifier (JPA), known for its quantum-limited noise characteristics, has been incorporated in the detection system to capture the weakly… ▽ More The cavity haloscope is among the most widely adopted experimental platforms designed to detect dark matter axions with its principle relying on the conversion of axions into microwave photons in the presence of a strong magnetic field. The Josephson parametric amplifier (JPA), known for its quantum-limited noise characteristics, has been incorporated in the detection system to capture the weakly interacting axion signals. However, the performance of the JPA can be influenced by its environment, leading to potential unreliability of a predefined parameter set obtained in a specific laboratory setting. Furthermore, conducting a broadband search requires consecutive characterization of the amplifier across different tuning frequencies. To ensure more reliable measurements, we utilize the Nelder-Mead technique as a numerical search method to dynamically determine the optimal operating conditions. This heuristic search algorithm explores the multidimensional parameter space of the JPA, optimizing critical characteristics such as gain and noise temperature to maximize signal-to-noise ratios for a given experimental setup. Our study presents a comprehensive analysis of the properties of a flux-driven JPA to demonstrate the effectiveness of the algorithm. This approach contributes to ongoing efforts in axion dark matter research by offering an efficient method to enhance axion detection sensitivity through the optimized utilization of JPAs. △ Less

Submitted 28 April, 2024; originally announced April 2024.

Comments: 11 pages, 9 figures

XiHe: A Data-Driven Model for Global Ocean Eddy-Resolving Forecasting

Authors: Xiang Wang, Renzhi Wang, Ningzi Hu, Pinqiang Wang, Peng Huo, Guihua Wang, Huizan Wang, Senzhang Wang, Junxing Zhu, Jianbo Xu, Jun Yin, Senliang Bao, Ciqiang Luo, Ziqing Zu, Yi Han, Weimin Zhang, Kaijun Ren, Kefeng Deng, Junqiang Song

Abstract: The leading operational Global Ocean Forecasting Systems (GOFSs) use physics-driven numerical forecasting models that solve the partial differential equations with expensive computation. Recently, specifically in atmosphere weather forecasting, data-driven models have demonstrated significant potential for speeding up environmental forecasting by orders of magnitude, but there is still no data-dri… ▽ More The leading operational Global Ocean Forecasting Systems (GOFSs) use physics-driven numerical forecasting models that solve the partial differential equations with expensive computation. Recently, specifically in atmosphere weather forecasting, data-driven models have demonstrated significant potential for speeding up environmental forecasting by orders of magnitude, but there is still no data-driven GOFS that matches the forecasting accuracy of the numerical GOFSs. In this paper, we propose the first data-driven 1/12° resolution global ocean eddy-resolving forecasting model named XiHe, which is established from the 25-year France Mercator Ocean International's daily GLORYS12 reanalysis data. XiHe is a hierarchical transformer-based framework coupled with two special designs. One is the land-ocean mask mechanism for focusing exclusively on the global ocean circulation. The other is the ocean-specific block for effectively capturing both local ocean information and global teleconnection. Extensive experiments are conducted under satellite observations, in situ observations, and the IV-TT Class 4 evaluation framework of the world's leading operational GOFSs from January 2019 to December 2020. The results demonstrate that XiHe achieves stronger forecast performance in all testing variables than existing leading operational numerical GOFSs including Mercator Ocean Physical SYstem (PSY4), Global Ice Ocean Prediction System (GIOPS), BLUElinK OceanMAPS (BLK), and Forecast Ocean Assimilation Model (FOAM). Particularly, the accuracy of ocean current forecasting of XiHe out to 60 days is even better than that of PSY4 in just 10 days. Additionally, XiHe is able to forecast the large-scale circulation and the mesoscale eddies. Furthermore, it can make a 10-day forecast in only 0.35 seconds, which accelerates the forecast speed by thousands of times compared to the traditional numerical GOFSs. △ Less

Submitted 22 October, 2024; v1 submitted 5 February, 2024; originally announced February 2024.

Time dependent Vibrational Electronic Coupled Cluster (VECC) theory for non-adiabatic nuclear dynamics

Authors: Songhao Bao, Neil Raymond, Marcel Nooijen

Abstract: A time-dependent vibrational electronic coupled-cluster (VECC) approach is proposed to simulate photoelectron/ UV-VIS absorption spectra, as well as time-dependent properties for non-adiabatic vibronic models, going beyond the Born-Oppenheimer approximation. A detailed derivation of the equations of motion and a motivation of the ansatz are presented. The VECC method employs second-quantized boson… ▽ More A time-dependent vibrational electronic coupled-cluster (VECC) approach is proposed to simulate photoelectron/ UV-VIS absorption spectra, as well as time-dependent properties for non-adiabatic vibronic models, going beyond the Born-Oppenheimer approximation. A detailed derivation of the equations of motion and a motivation of the ansatz are presented. The VECC method employs second-quantized bosonic construction operators and a mixed linear and exponential ansatz to form a compact representation of the time-dependent wave-function. Importantly, the method does not require a basis set, has only few user-defined inputs, and has a classical (polynomial) scaling with respect to the number of degrees of freedom (of the vibronic model), resulting in a favourable computational cost. In benchmark applications to small models and molecules the VECC method provides accurate results, compared to Multi-Configurational Time-dependent Hartree (MCTDH) calculations when predicting short-time dynamical properties (i.e. photo-elecron / UV-VIS absorption spectra) for non-adiabatic vibronic models. To illustrate the capabilities the VECC method is also applied successfully to a large vibronic model for hexahelicene with 14 electronic states and 63 normal modes, developed in the group by Santoro. △ Less

Submitted 2 December, 2023; originally announced December 2023.

CATLIFE (Complementary Arm for Target LIke FragmEnts): Spectrometer for Target like fragments at VAMOS++

Authors: Y. Son, Y. H. Kim, Y. Cho, S. Choi, S. Bae, K. I. Hahn, J. Park, A. Navin, A. Lemasson, M. Rejmund, D. Ramos, E. Clément, D. Ackermann, A. Utepov, C. Fougeres, J. C. Thomas, J. Goupil, G. Fremont, G. de France

Abstract: The multi-nucleon transfer reaction between 136Xe beam and 198Pt target at the beam energy 7 MeV/u was studied using the large acceptance spectrometer VAMOS++ coupled with the newly installed second arm time-of-flight and delayed $γ$-ray spectrometer CATLIFE (Complementary Arm for Target LIke FragmEnts). The CATLIFE detector is composed of a large area multi-wire proportional chamber and the EXOGA… ▽ More The multi-nucleon transfer reaction between 136Xe beam and 198Pt target at the beam energy 7 MeV/u was studied using the large acceptance spectrometer VAMOS++ coupled with the newly installed second arm time-of-flight and delayed $γ$-ray spectrometer CATLIFE (Complementary Arm for Target LIke FragmEnts). The CATLIFE detector is composed of a large area multi-wire proportional chamber and the EXOGAM HPGe clover detectors with an ion flight length of 1230 mm. Direct measurement of the target-like fragments (TLF) and the delayed $γ$-rays from the isomeric state helps to improve TLF identification. The use of the velocity of TLFs and the delayed $γ$-ray demonstrate the proof of principle and effectiveness of the new setup. △ Less

Submitted 13 November, 2023; originally announced November 2023.

Journal ref: Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms Volume 540, July 2023, Pages 259-261

Particle Identification at VAMOS++ with Machine Learning Techniques

Authors: Y. Cho, Y. H. Kim, S. Choi, J. Park, S. Bae, K. I. Hahn, Y. Son, A. Navin, A. Lemasson, M. Rejmund, D. Ramos, D. Ackermann, A. Utepov, C. Fourgeres, J. C. Thomas, J. Goupil, G. Fremont, G. de France, Y. X. Watanabe, Y. Hirayama, S. Jeong, T. Niwase, H. Miyatake, P. Schury, M. Rosenbusch , et al. (23 additional authors not shown)

Abstract: Multi-nucleon transfer reaction between 136Xe beam and 198Pt target was performed using the VAMOS++ spectrometer at GANIL to study the structure of n-rich nuclei around N=126. Unambiguous charge state identification was obtained by combining two supervised machine learning methods, deep neural network (DNN) and positional correction using a gradient-boosting decision tree (GBDT). The new method re… ▽ More Multi-nucleon transfer reaction between 136Xe beam and 198Pt target was performed using the VAMOS++ spectrometer at GANIL to study the structure of n-rich nuclei around N=126. Unambiguous charge state identification was obtained by combining two supervised machine learning methods, deep neural network (DNN) and positional correction using a gradient-boosting decision tree (GBDT). The new method reduced the complexity of the kinetic energy calibration and outperformed the conventional method, improving the charge state resolution by 8% △ Less

Submitted 14 November, 2023; v1 submitted 13 November, 2023; originally announced November 2023.

Journal ref: Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, Volume 541, August 2023, Pages 240-242

Allying nanophotonic structures with two-dimensional van der Waals materials

Authors: Yuan Meng, Hongkun Zhong, Zhihao Xu, Tiantian He, Justin S. Kim, Sangmoon Han, Yijie Shen, Mali Gong, Sang-Hoon Bae, Qirong Xiao

Abstract: The integration of two-dimensional (2D) materials with photonic structures has catalyzed a wide spectrum of optical and optoelectronic applications. Conventional nanophotonic structures generally lack efficient reconfigurability and multifunctionality. The atomically thin 2D van der Waals materials can thus infuse new functionality and reconfigurability to the well-established library of photonic… ▽ More The integration of two-dimensional (2D) materials with photonic structures has catalyzed a wide spectrum of optical and optoelectronic applications. Conventional nanophotonic structures generally lack efficient reconfigurability and multifunctionality. The atomically thin 2D van der Waals materials can thus infuse new functionality and reconfigurability to the well-established library of photonic structures such as integrated waveguides, optical fibers, photonic crystals, micro-cavities, and metasurface, to name a few. Thanks to the handiness of van der Waals interfaces, the 2D materials can be easily transferred and mixed with other prefabricated photonic templates with high degrees of freedom, and can act as the optical gain, modulation, sensing, or plasmonic media for diverse applications. Here we review recent advents on combining 2D materials to nanophotonic structures for new functionality development or performance enhancements. Challenges and emerging opportunities in integrating van der Waals building blocks beyond 2D materials are also discussed. △ Less

Submitted 12 May, 2023; originally announced May 2023.

Comments: 23 pages

Input optics systems of the KAGRA detector during O3GK

Authors: T. Akutsu, M. Ando, K. Arai, Y. Arai, S. Araki, A. Araya, N. Aritomi, H. Asada, Y. Aso, S. Bae, Y. Bae, L. Baiotti, R. Bajpai, M. A. Barton, K. Cannon, Z. Cao, E. Capocasa, M. Chan, C. Chen, K. Chen, Y. Chen, C-I. Chiang, H. Chu, Y-K. Chu, S. Eguchi , et al. (228 additional authors not shown)

Abstract: KAGRA, the underground and cryogenic gravitational-wave detector, was operated for its solo observation from February 25th to March 10th, 2020, and its first joint observation with the GEO 600 detector from April 7th -- 21st, 2020 (O3GK). This study presents an overview of the input optics systems of the KAGRA detector, which consist of various optical systems, such as a laser source, its intensit… ▽ More KAGRA, the underground and cryogenic gravitational-wave detector, was operated for its solo observation from February 25th to March 10th, 2020, and its first joint observation with the GEO 600 detector from April 7th -- 21st, 2020 (O3GK). This study presents an overview of the input optics systems of the KAGRA detector, which consist of various optical systems, such as a laser source, its intensity and frequency stabilization systems, modulators, a Faraday isolator, mode-matching telescopes, and a high-power beam dump. These optics were successfully delivered to the KAGRA interferometer and operated stably during the observations. The laser frequency noise was observed to limit the detector sensitivity above a few kHz, whereas the laser intensity did not significantly limit the detector sensitivity. △ Less

Submitted 12 October, 2022; originally announced October 2022.

Boiling and cavitation caused by transient heat transfer in superfluid helium-4

Authors: Hamid Sanavandi, Mikai Hulse, Shiran Bao, Yuan Tang, Wei Guo

Abstract: Superfluid helium-4 (He II) has been widely utilized as a coolant in various scientific and engineering applications due to its superior heat transfer capability. An important parameter required in the design of many He II based cooling systems is the peak heat flux $q^*$, which refers to the threshold heat flux above which boiling spontaneously occurs in He II. Past experimental and numerical stu… ▽ More Superfluid helium-4 (He II) has been widely utilized as a coolant in various scientific and engineering applications due to its superior heat transfer capability. An important parameter required in the design of many He II based cooling systems is the peak heat flux $q^*$, which refers to the threshold heat flux above which boiling spontaneously occurs in He II. Past experimental and numerical studies showed that $q^*$ increases when the heating time $t_h$ is reduced, which leads to an intuitive expectation that very high $q^*$ may be achievable at sufficiently small $t_h$. Knowledge on how $q^*$ actually behaves at small $t_h$ is important for applications such as laser ablation in He II. Here we present a numerical study on the evolution of the thermodynamic state of the He II in front of a planar heater by solving the He II two-fluid equations of motion. For an applied heat flux, we determine the heating time beyond which the He II near the heater transits to the vapor phase. As such, a curve correlating $q^*$ and $t_h$ can be obtained, which nicely reproduces some relevant experimental data. Surprisingly, we find that there exists a critical peak heat flux $q^*_c$, above which boiling occurs nearly instantaneously regardless of $t_h$. We reveal that the boiling in this regime is essentially cavitation caused by the combined effects of the first-sound and the second-sound waves in He II. Based on this physical picture, an analytical model for $q^*_c$ is developed, which reproduces the simulated $q^*_c$ values at various He II bath temperatures and hydrostatic head pressures. This work represents a major progress in our understanding of transient heat transfer in He II. △ Less

Submitted 11 June, 2022; originally announced June 2022.

Comments: 8 pages, 7 figures

Tunable photonic crystal haloscope for high-mass axion searches

Authors: Sungjae Bae, SungWoo Youn, Junu Jeong

Abstract: In the search for axion dark matter, the cavity-based haloscope offers the most sensitive approach to the theoretically interesting models in the microwave region. However, experimental searches have been limited to relatively low masses up to a few tens of $μ$eV, benefiting from large detection volumes and high quality factors for a given experimental setup. We propose a new cavity design suitabl… ▽ More In the search for axion dark matter, the cavity-based haloscope offers the most sensitive approach to the theoretically interesting models in the microwave region. However, experimental searches have been limited to relatively low masses up to a few tens of $μ$eV, benefiting from large detection volumes and high quality factors for a given experimental setup. We propose a new cavity design suitable for axion searches in higher mass regions with enhanced performance. The design features a periodic arrangement of dielectric material in a conventional conducting cavity where the resonant frequency is determined by the interspace. This photonic crystal haloscope can make full use of a given volume even at high frequencies while substantially improving the cavity quality factor. An auxetic structure is considered to deploy the array for two-dimensional frequency tuning. We present the characteristics of this haloscope design and demonstrate its feasibility for high-mass axion searches. △ Less

Submitted 30 September, 2022; v1 submitted 18 May, 2022; originally announced May 2022.

Comments: 7 pages, 9 figures

Multiplication of freestanding semiconductor membranes from a single wafer by advanced remote epitaxy

Authors: Hyunseok Kim, Yunpeng Liu, Kuangye Lu, Celesta S. Chang, Kuan Qiao, Ki Seok Kim, Bo-In Park, Junseok Jeong, Menglin Zhu, Jun Min Suh, Yongmin Baek, You Jin Ji, Sungsu Kang, Sangho Lee, Ne Myo Han, Chansoo Kim, Chanyeol Choi, Xinyuan Zhang, Haozhe Wang, Lingping Kong, Jungwon Park, Kyusang Lee, Geun Young Yeom, Sungkyu Kim, Jinwoo Hwang , et al. (4 additional authors not shown)

Abstract: Freestanding single-crystalline membranes are an important building block for functional electronics. Especially, compounds semiconductor membranes such as III-N and III-V offer great opportunities for optoelectronics, high-power electronics, and high-speed computing. Despite huge efforts to produce such membranes by detaching epitaxial layers from donor wafers, however, it is still challenging to… ▽ More Freestanding single-crystalline membranes are an important building block for functional electronics. Especially, compounds semiconductor membranes such as III-N and III-V offer great opportunities for optoelectronics, high-power electronics, and high-speed computing. Despite huge efforts to produce such membranes by detaching epitaxial layers from donor wafers, however, it is still challenging to harvest epitaxial layers using practical processes. Here, we demonstrate a method to grow and harvest multiple epitaxial membranes with extremely high throughput at the wafer scale. For this, 2D materials are directly formed on III-N and III-V substrates in epitaxy systems, which enables an advanced remote epitaxy scheme comprised of multiple alternating layers of 2D materials and epitaxial layers that can be formed by a single epitaxy run. Each epilayer in the multi-stack structure is then harvested by layer-by-layer peeling, producing multiple freestanding membranes with unprecedented throughput from a single wafer. Because 2D materials allow peeling at the interface without damaging the epilayer or the substrate, wafers can be reused for subsequent membrane production. Therefore, this work represents a meaningful step toward high-throughput and low-cost production of single-crystal membranes that can be heterointegrated. △ Less

Submitted 7 April, 2022; originally announced April 2022.

Solid immersion microlens arrays-based light-field camera for 3D in vivo imaging

Authors: Jae-Myeong Kwon, Sang-In Bae, Taehan Kim, Jeong Kun Kim, Ki-Hun Jeong

Abstract: Light-field imaging facilitates the miniaturization of 3D cameras while it requires the extension of the depth-of-field (DoF) for practical applications such as endoscopy and intraoral scanning. Here we report a light-field camera (LFC) using solid immersion microlens arrays (siMLAs) for 3D biomedical imaging. The experimental results show that the focal length of MLAs is increased by 2.7 times an… ▽ More Light-field imaging facilitates the miniaturization of 3D cameras while it requires the extension of the depth-of-field (DoF) for practical applications such as endoscopy and intraoral scanning. Here we report a light-field camera (LFC) using solid immersion microlens arrays (siMLAs) for 3D biomedical imaging. The experimental results show that the focal length of MLAs is increased by 2.7 times and the transmittance is enhanced up to 6.9% by immersion in PDMS film. In particular, the f-number of siMLAs exceeds the limit of conventional MLAs fabricated by thermal reflow, resulting in a larger DoF. The LFC based on siMLAs has successfully acquired the depth map of a dental phantom as a hand-held scanner. This LFC suggests a new way for developing a compact in vivo 3D imaging system. △ Less

Submitted 17 March, 2022; originally announced March 2022.

Highly sensitive strain sensor from topological-structure modulated dielectric elastic nanocomposites

Authors: Youjun Fan, Zhonghui Shen, Xinchen Zhou, Zhenkang Dan, Le Zhou, Weibin Ren, Tongxiang Tang, Shanyong Bao, Cewen Nan, Yang Shen

Abstract: Flexible strain sensors are critical to several potential intelligent applications, such as human-machine interfaces, soft robotics, human motion detection, and safety monitoring of components. Stretchable functional materials are important components of strain sensors, and they are still major challenges for high performance strain sensors. Herein, we demonstrate a novel strategy of designing and… ▽ More Flexible strain sensors are critical to several potential intelligent applications, such as human-machine interfaces, soft robotics, human motion detection, and safety monitoring of components. Stretchable functional materials are important components of strain sensors, and they are still major challenges for high performance strain sensors. Herein, we demonstrate a novel strategy of designing and optimizing flexible strain sensor by developing topological structure modulated high permittivity elastic nanocomposite. The topological structure with three-phase percolative nano-nanonetworks produces synergistic effects of space charge enhancement and local electric field modulation, and it gives rise to an ultrahigh dielectric permittivity (113.4, at 1 kHz, over 1500% enhancement than that of commercial elastic polyurethane matrix) and excellent comprehensive electromechanical performance, and the optimal comprehensive electromechanical performance reaches to 542.91 MPa-1, which is over 9-fold than that of commercial polyurethane elastic film. An interdigital capacitive strain sensor is designed using the topological structured elastic dielectric nanocomposite. It possesses high initial capacitance density and positive capacitance response with stain, achieving high signal-to-noise ratio, high capacitance response sensitivity, and wide linear range, and it breaks through disadvantages of negative sensitivity and narrow linear range for conventional interdigital strain sensors. The prepared integrated strain sensor arrays are able to measure local strain of convoluted surfaces and monitor the motion of soft actuators in real time, and they would make conditions for intelligent control systems and the study of morphological intelligence. △ Less

Submitted 10 October, 2021; originally announced October 2021.

Heat and mass transfer during a sudden loss of vacuum in a liquid helium cooled tube -- Part III

Authors: Nathaniel Garceau, Shiran Bao, Wei Guo

Abstract: A sudden loss of vacuum can be catastrophic for particle accelerators. In such an event, air leaks into the liquid-helium-cooled accelerator beamline tube and condenses on its inner surface, causing rapid boiling of the helium and dangerous pressure build-up. Understanding the coupled heat and mass transfer processes is important for the design of beamline cryogenic systems. Our past experimental… ▽ More A sudden loss of vacuum can be catastrophic for particle accelerators. In such an event, air leaks into the liquid-helium-cooled accelerator beamline tube and condenses on its inner surface, causing rapid boiling of the helium and dangerous pressure build-up. Understanding the coupled heat and mass transfer processes is important for the design of beamline cryogenic systems. Our past experimental study on nitrogen gas propagating in a copper tube cooled by normal liquid helium (He I) has revealed a nearly exponential slowing down of the gas front. A theoretical model that accounts for the interplay of the gas dynamics and the condensation was developed, which successfully reproduced various key observations. However, since many accelerator beamlines are actually cooled by the superfluid phase of helium (He II) in which the heat transfer is via a non-classical thermal-counterflow mode, we need to extend our work to the He II cooled tube. This paper reports our systematic measurements using He II and the numerical simulations based on a modified model that accounts for the He II heat-transfer characteristics. By tuning the He II peak heat-flux parameter in our model, we have reproduced the observed gas dynamics in all experimental runs. The fine-tuned model is then utilized to reliably evaluate the heat deposition in He II. This work not only advances our understanding of condensing gas dynamics but also has practical implications to the design codes for beamline safety. △ Less

Submitted 11 May, 2021; originally announced May 2021.

Comments: 9 pages, 9 figures

Transient heat transfer of superfluid $^4$He in nonhomogeneous geometries -- Part I: Second sound, rarefaction, and thermal layer

Authors: Shiran Bao, Wei Guo

Abstract: Transient heat transfer in superfluid $^4$He (He II) is a complex process that involves the interplay of the unique counterflow heat-transfer mode, the emission of second-sound waves, and the creation of quantized vortices. Many past researches focused on homogeneous heat transfer of He II in a uniform channel driven by a planar heater. In this paper, we report our systematic study of He II transi… ▽ More Transient heat transfer in superfluid $^4$He (He II) is a complex process that involves the interplay of the unique counterflow heat-transfer mode, the emission of second-sound waves, and the creation of quantized vortices. Many past researches focused on homogeneous heat transfer of He II in a uniform channel driven by a planar heater. In this paper, we report our systematic study of He II transient heat transfer in nonhomogeneous geometries that are pertinent to emergent applications. By solving the He II two-fluid equation of motion coupled with the Vinen's equation for vortex-density evolution, we examine and compare the characteristics of transient heat transfer from planar, cylindrical, and spherical heaters in He II. Our results show that as the heater turns on, an outgoing second-sound pulse emerges, in which the vortex density grows rapidly. These vortices attenuate the second sound and result in a heated He II layer in front of the heater, i.e., the thermal layer. In the planar case where the vortices are created throughout the space, the second-sound pulse is continuously attenuated, leading to a strong thermal layer that diffusively spreads following the heat pulse. On the contrary, in the cylindrical and the spherical heater cases, vortices are created mainly in a thin thermal layer near the heater surface. As the heat pulse ends, a rarefaction tail develops following the second-sound pulse, in which the temperature drops. This rarefaction tail can promptly suppress the thermal layer and take away all the thermal energy deposited in it. The effects of the heater size, heat flux, pulse duration, and temperature on the thermal-layer dynamics are discussed. We also show how the peak heat flux for the onset of boiling in He II can be studied in our model. △ Less

Submitted 3 February, 2021; originally announced February 2021.

Superdiffusion of quantized vortices uncovering scaling behavior of quantum turbulence

Authors: Yuan Tang, Shiran Bao, Wei Guo

Abstract: Generic scaling laws, such as the Kolmogorov's 5/3-law, are milestone achievements of turbulence research in classical fluids. For quantum fluids such as atomic Bose-Einstein condensates, superfluid helium, and superfluid neutron stars, turbulence can also exist in the presence of a chaotic tangle of evolving quantized vortex lines. However, due to the lack of suitable experimental tools to direct… ▽ More Generic scaling laws, such as the Kolmogorov's 5/3-law, are milestone achievements of turbulence research in classical fluids. For quantum fluids such as atomic Bose-Einstein condensates, superfluid helium, and superfluid neutron stars, turbulence can also exist in the presence of a chaotic tangle of evolving quantized vortex lines. However, due to the lack of suitable experimental tools to directly probe the vortex-tangle motion, so far little is known about possible scaling laws that characterize the velocity correlations and trajectory statistics of the vortices in quantum-fluid turbulence (QT). Acquiring such knowledge could greatly benefit the development of advanced statistical models of QT. Here we report an experiment where a tangle of vortices in superfluid $^4$He are decorated with solidified deuterium tracer particles. Under experimental conditions where these tracers follow the motion of the vortices, we observed an apparent superdiffusion of the vortices. Our analysis shows that this superdiffusion is not due to Lévy flights, i.e., long-distance hops that are known to be responsible for superdiffusion of random walkers. Instead, a previously unknown power-law scaling of the vortex-velocity temporal correlation is uncovered as the cause. This finding may motivate future research on hidden scaling laws in QT. △ Less

Submitted 6 January, 2021; originally announced January 2021.

Comments: 7 pages, 8 figures

Overview of KAGRA: Detector design and construction history

Authors: T. Akutsu, M. Ando, K. Arai, Y. Arai, S. Araki, A. Araya, N. Aritomi, Y. Aso, S. -W. Bae, Y. -B. Bae, L. Baiotti, R. Bajpai, M. A. Barton, K. Cannon, E. Capocasa, M. -L. Chan, C. -S. Chen, K. -H. Chen, Y. -R. Chen, H. -Y. Chu, Y-K. Chu, S. Eguchi, Y. Enomoto, R. Flaminio, Y. Fujii , et al. (175 additional authors not shown)

Abstract: KAGRA is a newly built gravitational-wave telescope, a laser interferometer comprising arms with a length of 3\,km, located in Kamioka, Gifu, Japan. KAGRA was constructed under the ground and it is operated using cryogenic mirrors that help in reducing the seismic and thermal noise. Both technologies are expected to provide directions for the future of gravitational-wave telescopes. In 2019, KAGRA… ▽ More KAGRA is a newly built gravitational-wave telescope, a laser interferometer comprising arms with a length of 3\,km, located in Kamioka, Gifu, Japan. KAGRA was constructed under the ground and it is operated using cryogenic mirrors that help in reducing the seismic and thermal noise. Both technologies are expected to provide directions for the future of gravitational-wave telescopes. In 2019, KAGRA finished all installations with the designed configuration, which we call the baseline KAGRA. In this occasion, we present an overview of the baseline KAGRA from various viewpoints in a series of of articles. In this article, we introduce the design configurations of KAGRA with its historical background. △ Less

Submitted 2 July, 2020; v1 submitted 12 May, 2020; originally announced May 2020.

Comments: 33 pages, 10 figures

Stereoscopic molecular tagging for superconducting accelerator-cavity quench spot detection

Authors: Shiran Bao, Toshiaki Kanai, Yang Zhang, Louis N. Cattafesta III, Wei Guo

Abstract: Superconducting radio-frequency (SRF) cavities cooled by superfluid helium-4 (He II) are building blocks of many modern particle accelerators due to their high quality factor. However, Joule heating from sub-millimeter surface defects on cavities can lead to cavity quenching, which limits the maximum acceleration gradient of the accelerators. Developing a non-contacting detection technology to acc… ▽ More Superconducting radio-frequency (SRF) cavities cooled by superfluid helium-4 (He II) are building blocks of many modern particle accelerators due to their high quality factor. However, Joule heating from sub-millimeter surface defects on cavities can lead to cavity quenching, which limits the maximum acceleration gradient of the accelerators. Developing a non-contacting detection technology to accurately locate these surface defects is the key to improve the performance of SRF cavities and hence the accelerators. In a recent proof-of-concept experiment (Phys. Rev. Applied, 11, 044003 (2019)), we demonstrated that a molecular tagging velocimetry (MTV) technique based on the tracking of a He$_2^*$ molecular tracer line created nearby a surface hot spot in He II can be utilized to locate the hot spot. In order to make this technique practically useful, here we describe our further development of a stereoscopic MTV setup for tracking the tracer line's motion in three-dimensional (3D) space. We simulate a quench spot by applying a transient voltage pulse to a small heater mounted on a substrate plate. Images of the drifted tracer line, taken with two cameras from orthogonal directions, are used to reconstruct the line profile in 3D space. A new algorithm for analyzing the 3D line profile is developed, which incorporates the finite size effect of the heater. We show that the center location of the heater can be reproduced on the substrate surface with an uncertainty of only a few hundred microns, thereby proving the practicability of this method. △ Less

Submitted 9 May, 2020; originally announced May 2020.

Taking the pulse of COVID-19: A spatiotemporal perspective

Authors: Chaowei Yang, Dexuan Sha, Qian Liu, Yun Li, Hai Lan, Weihe Wendy Guan, Tao Hu, Zhenlong Li, Zhiran Zhang, John Hoot Thompson, Zifu Wang, David Wong, Shiyang Ruan, Manzhu Yu, Douglas Richardson, Luyao Zhang, Ruizhi Hou, You Zhou, Cheng Zhong, Yifei Tian, Fayez Beaini, Kyla Carte, Colin Flynn, Wei Liu, Dieter Pfoser , et al. (10 additional authors not shown)

Abstract: The sudden outbreak of the Coronavirus disease (COVID-19) swept across the world in early 2020, triggering the lockdowns of several billion people across many countries, including China, Spain, India, the U.K., Italy, France, Germany, and most states of the U.S. The transmission of the virus accelerated rapidly with the most confirmed cases in the U.S., and New York City became an epicenter of the… ▽ More The sudden outbreak of the Coronavirus disease (COVID-19) swept across the world in early 2020, triggering the lockdowns of several billion people across many countries, including China, Spain, India, the U.K., Italy, France, Germany, and most states of the U.S. The transmission of the virus accelerated rapidly with the most confirmed cases in the U.S., and New York City became an epicenter of the pandemic by the end of March. In response to this national and global emergency, the NSF Spatiotemporal Innovation Center brought together a taskforce of international researchers and assembled implemented strategies to rapidly respond to this crisis, for supporting research, saving lives, and protecting the health of global citizens. This perspective paper presents our collective view on the global health emergency and our effort in collecting, analyzing, and sharing relevant data on global policy and government responses, geospatial indicators of the outbreak and evolving forecasts; in developing research capabilities and mitigation measures with global scientists, promoting collaborative research on outbreak dynamics, and reflecting on the dynamic responses from human societies. △ Less

Submitted 8 May, 2020; originally announced May 2020.

Comments: 27 pages, 18 figures. International Journal of Digital Earth (2020)

AI-Driven CT-based quantification, staging and short-term outcome prediction of COVID-19 pneumonia

Authors: Guillaume Chassagnon, Maria Vakalopoulou, Enzo Battistella, Stergios Christodoulidis, Trieu-Nghi Hoang-Thi, Severine Dangeard, Eric Deutsch, Fabrice Andre, Enora Guillo, Nara Halm, Stefany El Hajj, Florian Bompard, Sophie Neveu, Chahinez Hani, Ines Saab, Alienor Campredon, Hasmik Koulakian, Souhail Bennani, Gael Freche, Aurelien Lombard, Laure Fournier, Hippolyte Monnier, Teodor Grand, Jules Gregory, Antoine Khalil , et al. (6 additional authors not shown)

Abstract: Chest computed tomography (CT) is widely used for the management of Coronavirus disease 2019 (COVID-19) pneumonia because of its availability and rapidity. The standard of reference for confirming COVID-19 relies on microbiological tests but these tests might not be available in an emergency setting and their results are not immediately available, contrary to CT. In addition to its role for early… ▽ More Chest computed tomography (CT) is widely used for the management of Coronavirus disease 2019 (COVID-19) pneumonia because of its availability and rapidity. The standard of reference for confirming COVID-19 relies on microbiological tests but these tests might not be available in an emergency setting and their results are not immediately available, contrary to CT. In addition to its role for early diagnosis, CT has a prognostic role by allowing visually evaluating the extent of COVID-19 lung abnormalities. The objective of this study is to address prediction of short-term outcomes, especially need for mechanical ventilation. In this multi-centric study, we propose an end-to-end artificial intelligence solution for automatic quantification and prognosis assessment by combining automatic CT delineation of lung disease meeting performance of experts and data-driven identification of biomarkers for its prognosis. AI-driven combination of variables with CT-based biomarkers offers perspectives for optimal patient management given the shortage of intensive care beds and ventilators. △ Less

Submitted 20 April, 2020; originally announced April 2020.

An exploration of Homogeneous Isotropic Turbulence in He II Using Particle Tracking Velocimetry

Authors: Yuan Tang, Shiran Bao, Toshiaki Kanai, Wei Guo

Abstract: Despite being a quantum two-fluid system, superfluid helium-4 (He II) is observed to behave similarly to classical fluids when a flow is generated by mechanical forcing. This similarity has brought up the feasibility of utilizing He II for high Reynolds number classical turbulence research, considering the small kinematic viscosity of He II. However, it has been suggested that the non-classical di… ▽ More Despite being a quantum two-fluid system, superfluid helium-4 (He II) is observed to behave similarly to classical fluids when a flow is generated by mechanical forcing. This similarity has brought up the feasibility of utilizing He II for high Reynolds number classical turbulence research, considering the small kinematic viscosity of He II. However, it has been suggested that the non-classical dissipation mechanism in He II at small scales may alter its turbulent statistics and intermittency. In this work, we report our study of a nearly homogeneous and isotropic turbulence (HIT) generated by a towed grid in He II. We measure the velocity field using particle tracking velocimetry with solidified deuterium particles as the tracers. By correlating the velocities measured simultaneously on different particle trajectories or at different times along the same particle trajectory, we are able to conduct both Eulerian and Lagrangian flow analyses. Spatial velocity structure functions obtained through the Eulerian analysis show scaling behaviors in the inertial subrange similar to that for classical HIT but with enhanced intermittency. The Lagrangian analysis allows us to examine the flow statistics down to below the dissipation length scale. Interestingly, strong deviations from the classical scaling behaviors are observed in this regime. We discuss how these deviations may relate to the motion of quantized vortices in the superfluid component in He II. △ Less

Submitted 12 April, 2020; originally announced April 2020.

Comments: 10 pages, 10 figures

A cryogenic-helium pipe flow facility with unique double-line molecular tagging velocimetry capability

Authors: Hamid Sanavandi, Shiran Bao, Yang Zhang, Ruben Keijzer, Wei Guo, Lou N. Cattafesta III

Abstract: Cryogenic helium-4 has extremely small kinetic viscosity, which makes it a promising material for high Reynolds ($Re$) number turbulence research in compact laboratory apparatuses. In its superfluid phase (He II), helium has an extraordinary heat transfer capability and has been utilized in various scientific and engineering applications. In order to unlock the full potential of helium in turbulen… ▽ More Cryogenic helium-4 has extremely small kinetic viscosity, which makes it a promising material for high Reynolds ($Re$) number turbulence research in compact laboratory apparatuses. In its superfluid phase (He II), helium has an extraordinary heat transfer capability and has been utilized in various scientific and engineering applications. In order to unlock the full potential of helium in turbulence research and to improve our understanding of the heat transfer mechanism in He II, a flow facility that allows quantitative study of helium heat-and-mass transfer processes is needed. Here we report our work in assembling and testing a unique helium pipe flow facility that incorporates a novel double-line molecular tracking velocimetry (DL-MTV) system. This flow facility allows us to generate turbulent pipe flows with $Re$ above $10^7$, and it can also be adapted to produce heat-induced counterflow in He II. The DL-MTV system, which is based on the generation and tracking of two parallel thin He$^*_2$ molecular tracer lines with an adjustable separation distance, allows us to measure not only the velocity profile but also both the transverse and longitudinal spatial velocity structure functions. We have also installed a deferential pressure sensor to the flow pipe for pressure drop measurement. The testing results of the flow facility and the measurement devices are presented. We discuss how this facility will allow us to solve some outstanding problems in the helium heat-and-mass transfer topic area. △ Less

Submitted 16 March, 2020; originally announced March 2020.

Comments: 9 pages, 11 figures

An arm length stabilization system for KAGRA and future gravitational-wave detectors

Authors: T. Akutsu, M. Ando, K. Arai, K. Arai, Y. Arai, S. Araki, A. Araya, N. Aritomi, Y. Aso, S. Bae, Y. Bae, L. Baiotti, R. Bajpai, M. A. Barton, K. Cannon, E. Capocasa, M. Chan, C. Chen, K. Chen, Y. Chen, H. Chu, Y-K. Chu, K. Doi, S. Eguchi, Y. Enomoto , et al. (181 additional authors not shown)

Abstract: Modern ground-based gravitational wave (GW) detectors require a complex interferometer configuration with multiple coupled optical cavities. Since achieving the resonances of the arm cavities is the most challenging among the lock acquisition processes, the scheme called arm length stabilization (ALS) had been employed for lock acquisition of the arm cavities. We designed a new type of the ALS, wh… ▽ More Modern ground-based gravitational wave (GW) detectors require a complex interferometer configuration with multiple coupled optical cavities. Since achieving the resonances of the arm cavities is the most challenging among the lock acquisition processes, the scheme called arm length stabilization (ALS) had been employed for lock acquisition of the arm cavities. We designed a new type of the ALS, which is compatible with the interferometers having long arms like the next generation GW detectors. The features of the new ALS are that the control configuration is simpler than those of previous ones and that it is not necessary to lay optical fibers for the ALS along the kilometer-long arms of the detector. Along with simulations of its noise performance, an experimental test of the new ALS was performed utilizing a single arm cavity of KAGRA. This paper presents the first results of the test where we demonstrated that lock acquisition of the arm cavity was achieved using the new ALS and residual noise was measured to be $8.2\,\mathrm{Hz}$ in units of frequency, which is smaller than the linewidth of the arm cavity and thus low enough to lock the full interferometer of KAGRA in a repeatable and reliable manner. △ Less

Submitted 28 November, 2019; v1 submitted 2 October, 2019; originally announced October 2019.

Comments: 21 pages, 8figures

Journal ref: Class. Quantum Grav. 37 (2020) 035004

Sputtered Spontaneously Nano-porous VO2-based Films via PTFE Self-Template: Localized Surface Plasmon Resonance Induced Robust Optical Performance for Solar Glazing Application

Authors: Shiwei Long, Xun Cao, Rong Huang, Fang Xu, Ning Li, Aibin Huang, Guangyao Sun, Shanhu Bao, Hongjie Luo, Ping Jin

Abstract: The PTFE (Teflon) has been selected as the self-template structural material in preparation of VO2 films using reactive magnetron sputtering systems and post annealing progress. Spontaneous random nano-porous structures of VO2 films growing on quartz glasses have been deliberately established via bottom-up processing through this novel and facile approach. The nano-porous VO2 films exhibit an exce… ▽ More The PTFE (Teflon) has been selected as the self-template structural material in preparation of VO2 films using reactive magnetron sputtering systems and post annealing progress. Spontaneous random nano-porous structures of VO2 films growing on quartz glasses have been deliberately established via bottom-up processing through this novel and facile approach. The nano-porous VO2 films exhibit an excellent optical performance based on localized surface plasmon resonance (LSPR), with ultrahigh luminous transmittance (Tlum) up to 78.0% and the promoted solar modulation ability (ΔTsol) of 14.1%. Meanwhile, the ingenious microstructure of film provides an antireflection function from multiple perspectives in visible light, with the potential of the windshield on vehicles for smart solar modulation. The nano-porous films expand the practical application of thermochromic VO2 to a fire-new field, breaking the optical performance envelope of single-layer dense VO2 film away, and offering a universal method to prepare homogeneous nano-porous structures for thin films. △ Less

Submitted 8 February, 2019; originally announced February 2019.

First cryogenic test operation of underground km-scale gravitational-wave observatory KAGRA

Authors: KAGRA Collaboration, T. Akutsu, M. Ando, K. Arai, Y. Arai, S. Araki, A. Araya, N. Aritomi, H. Asada, Y. Aso, S. Atsuta, K. Awai, S. Bae, L. Baiotti, M. A. Barton, K. Cannon, E. Capocasa, C-S. Chen, T-W. Chiu, K. Cho, Y-K. Chu, K. Craig, W. Creus, K. Doi, K. Eda , et al. (179 additional authors not shown)

Abstract: KAGRA is a second-generation interferometric gravitational-wave detector with 3-km arms constructed at Kamioka, Gifu in Japan. It is now in its final installation phase, which we call bKAGRA (baseline KAGRA), with scientific observations expected to begin in late 2019. One of the advantages of KAGRA is its underground location of at least 200 m below the ground surface, which brings small seismic… ▽ More KAGRA is a second-generation interferometric gravitational-wave detector with 3-km arms constructed at Kamioka, Gifu in Japan. It is now in its final installation phase, which we call bKAGRA (baseline KAGRA), with scientific observations expected to begin in late 2019. One of the advantages of KAGRA is its underground location of at least 200 m below the ground surface, which brings small seismic motion at low frequencies and high stability of the detector. Another advantage is that it cools down the sapphire test mass mirrors to cryogenic temperatures to reduce thermal noise. In April-May 2018, we have operated a 3-km Michelson interferometer with a cryogenic test mass for 10 days, which was the first time that km-scale interferometer was operated at cryogenic temperatures. In this article, we report the results of this "bKAGRA Phase 1" operation. We have demonstrated the feasibility of 3-km interferometer alignment and control with cryogenic mirrors. △ Less

Submitted 11 January, 2019; originally announced January 2019.

Comments: 23 pages, 11 figures

Report number: JGW-P1809289

Journal ref: Classical and Quantum Gravity 36, 165008 (2019)

Vibration isolation system with a compact damping system for power recycling mirrors of KAGRA

Authors: Y. Akiyama, T. Akutsu, M. Ando, K. Arai, Y. Arai, S. Araki, A. Araya, N. Aritomi, H. Asada, Y. Aso, S. Bae, L. Baiotti, M. A. Barton, K. Cannon, E. Capocasa, C-S. Chen, T-W. Chiu, K. Cho, Y-K. Chu, K. Craig, V. Dattilo, K. Doi, Y. Enomoto, R. Flaminio, Y. Fujii , et al. (149 additional authors not shown)

Abstract: A vibration isolation system called Type-Bp system used for power recycling mirrors has been developed for KAGRA, the interferometric gravitational-wave observatory in Japan. A suspension of the Type-Bp system passively isolates an optic from seismic vibration using three main pendulum stages equipped with two vertical vibration isolation systems. A compact reaction mass around each of the main st… ▽ More A vibration isolation system called Type-Bp system used for power recycling mirrors has been developed for KAGRA, the interferometric gravitational-wave observatory in Japan. A suspension of the Type-Bp system passively isolates an optic from seismic vibration using three main pendulum stages equipped with two vertical vibration isolation systems. A compact reaction mass around each of the main stages allows for achieving sufficient damping performance with a simple feedback as well as vibration isolation ratio. Three Type-Bp systems were installed in KAGRA, and were proved to satisfy the requirements on the damping performance, and also on estimated residual displacement of the optics. △ Less

Submitted 10 January, 2019; originally announced January 2019.

A New Approach for Measuring the Muon Anomalous Magnetic Moment and Electric Dipole Moment

Authors: M. Abe, S. Bae, G. Beer, G. Bunce, H. Choi, S. Choi, M. Chung, W. da Silva, S. Eidelman, M. Finger, Y. Fukao, T. Fukuyama, S. Haciomeroglu, K. Hasegawa, K. Hayasaka, N. Hayashizaki, H. Hisamatsu, T. Iijima, H. Iinuma, K. Inami, H. Ikeda, M. Ikeno, K. Ishida, T. Itahashi, M. Iwasaki , et al. (71 additional authors not shown)

Abstract: This paper introduces a new approach to measure the muon magnetic moment anomaly $a_μ = (g-2)/2$, and the muon electric dipole moment (EDM) $d_μ$ at the J-PARC muon facility. The goal of our experiment is to measure $a_μ$ and $d_μ$ using an independent method with a factor of 10 lower muon momentum, and a factor of 20 smaller diameter storage-ring solenoid compared with previous and ongoing muon… ▽ More This paper introduces a new approach to measure the muon magnetic moment anomaly $a_μ = (g-2)/2$, and the muon electric dipole moment (EDM) $d_μ$ at the J-PARC muon facility. The goal of our experiment is to measure $a_μ$ and $d_μ$ using an independent method with a factor of 10 lower muon momentum, and a factor of 20 smaller diameter storage-ring solenoid compared with previous and ongoing muon $g-2$ experiments with unprecedented quality of the storage magnetic field. Additional significant differences from the present experimental method include a factor of 1,000 smaller transverse emittance of the muon beam (reaccelerated thermal muon beam), its efficient vertical injection into the solenoid, and tracking each decay positron from muon decay to obtain its momentum vector. The precision goal for $a_μ$ is statistical uncertainty of 450 part per billion (ppb), similar to the present experimental uncertainty, and a systematic uncertainty less than 70 ppb. The goal for EDM is a sensitivity of $1.5\times 10^{-21}~e\cdot\mbox{cm}$. △ Less

Submitted 10 March, 2019; v1 submitted 10 January, 2019; originally announced January 2019.

Comments: 24 pages, 14 figures

Quench spot detection for superconducting accelerator cavities via flow visualization in superfluid helium-4

Authors: Shiran Bao, Wei Guo

Abstract: Superconducting ratio-frequency (SRF) cavities, cooled by superfluid helium-4 (He II), are key components in modern particle accelerators. Quenches in SRF cavities caused by Joule heating from local surface defects can severely limit the maximum achievable accelerating field. Existing methods for quench spot detection include temperature mapping and second-sound triangulation. These methods are us… ▽ More Superconducting ratio-frequency (SRF) cavities, cooled by superfluid helium-4 (He II), are key components in modern particle accelerators. Quenches in SRF cavities caused by Joule heating from local surface defects can severely limit the maximum achievable accelerating field. Existing methods for quench spot detection include temperature mapping and second-sound triangulation. These methods are useful but all have known limitations. Here we describe a new method for surface quench spot detection by visualizing the heat transfer in He II via tracking He$_2^*$ molecular tracer lines. A proof-of-concept experiment has been conducted, in which a miniature heater mounted on a plate was pulsed on to simulate a surface quench spot. A He$_2^*$ tracer line created nearby the heater deforms due to the counterflow heat transfer in He II. By analyzing the tracer-line deformation, we can well reproduce the heater location within a few hundred microns, which clearly demonstrates the feasibility of this new technology. Our analysis also reveals that the heat content transported in He II is only a small fraction of the total input heat energy. We show that the remaining energy is essentially consumed in the formation of a cavitation zone near the heater. By estimating the size of this cavitation zone, we discuss how the existence of the cavitation zone may explain a decades-long puzzle observed in many second-sound triangulation experiments. △ Less

Submitted 17 December, 2018; originally announced December 2018.

Comments: 11 pages, 9 figures

Journal ref: Phys. Rev. Applied 11, 044003 (2019)

Imaging collective behavior in an rf-SQUID metamaterial tuned by DC and RF magnetic fields

Authors: Alexander P. Zhuravel, Seokjin Bae, Alexander V. Lukashenko, Alexander S. Averkin, Alexey V. Ustinov, Steven M. Anlage

Abstract: We examine the collective behavior of two-dimensional nonlinear superconducting metamaterials using a non-contact spatially resolved imaging technique. The metamaterial is made up of sub-wavelength nonlinear oscillators in a strongly coupled 27x27 planar array of radio-frequency Superconducting QUantum Interference Devices (rf SQUIDs). By using low-temperature laser scanning microscopy we image mi… ▽ More We examine the collective behavior of two-dimensional nonlinear superconducting metamaterials using a non-contact spatially resolved imaging technique. The metamaterial is made up of sub-wavelength nonlinear oscillators in a strongly coupled 27x27 planar array of radio-frequency Superconducting QUantum Interference Devices (rf SQUIDs). By using low-temperature laser scanning microscopy we image microwave currents in the driven SQUIDs while in non-radiating dark modes and identify the clustering and uniformity of like-oscillating meta-atoms. We follow the rearrangement of coherent patterns due to meta-atom resonant frequency tuning as a function of external dc and rf magnetic flux bias. We find that the rf current distribution across the SQUID array at zero dc flux and small rf flux reveals a low degree of coherence. By contrast, the spatial coherence improves dramatically upon increasing of rf flux amplitude, in agreement with simulation. △ Less

Submitted 15 January, 2019; v1 submitted 23 October, 2018; originally announced November 2018.

Comments: 16 pages including Supp. Mat

Journal ref: Appl. Phys. Lett. 114, 082601 (2019)

KAGRA: 2.5 Generation Interferometric Gravitational Wave Detector

Authors: T. Akutsu, M. Ando, K. Arai, Y. Arai, S. Araki, A. Araya, N. Aritomi, H. Asada, Y. Aso, S. Atsuta, K. Awai, S. Bae, L. Baiotti, M. A. Barton, K. Cannon, E. Capocasa, C-S. Chen, T-W. Chiu, K. Cho, Y-K. Chu, K. Craig, W. Creus, K. Doi, K. Eda, Y. Enomoto , et al. (169 additional authors not shown)

Abstract: The recent detections of gravitational waves (GWs) reported by LIGO/Virgo collaborations have made significant impact on physics and astronomy. A global network of GW detectors will play a key role to solve the unknown nature of the sources in coordinated observations with astronomical telescopes and detectors. Here we introduce KAGRA (former name LCGT; Large-scale Cryogenic Gravitational wave Tel… ▽ More The recent detections of gravitational waves (GWs) reported by LIGO/Virgo collaborations have made significant impact on physics and astronomy. A global network of GW detectors will play a key role to solve the unknown nature of the sources in coordinated observations with astronomical telescopes and detectors. Here we introduce KAGRA (former name LCGT; Large-scale Cryogenic Gravitational wave Telescope), a new GW detector with two 3-km baseline arms arranged in the shape of an "L", located inside the Mt. Ikenoyama, Kamioka, Gifu, Japan. KAGRA's design is similar to those of the second generations such as Advanced LIGO/Virgo, but it will be operating at the cryogenic temperature with sapphire mirrors. This low temperature feature is advantageous for improving the sensitivity around 100 Hz and is considered as an important feature for the third generation GW detector concept (e.g. Einstein Telescope of Europe or Cosmic Explorer of USA). Hence, KAGRA is often called as a 2.5 generation GW detector based on laser interferometry. The installation and commissioning of KAGRA is underway and its cryogenic systems have been successfully tested in May, 2018. KAGRA's first observation run is scheduled in late 2019, aiming to join the third observation run (O3) of the advanced LIGO/Virgo network. In this work, we describe a brief history of KAGRA and highlights of main feature. We also discuss the prospects of GW observation with KAGRA in the era of O3. When operating along with the existing GW detectors, KAGRA will be helpful to locate a GW source more accurately and to determine the source parameters with higher precision, providing information for follow-up observations of a GW trigger candidate. △ Less

Submitted 20 November, 2018; originally announced November 2018.

Comments: 6 pages, 3 figures (quality of some figures has been reduced)

Report number: JGW-P1809243

Journal ref: Nature Astronomy 3, 35 (2019)

Commissioning of the BRIKEN detector for the measurement of very exotic beta-delayed neutron emitters

Authors: A. Tolosa-Delgado, J. Agramunt, J. L. Tain, A. Algora, C. Domingo-Pardo, A. I. Morales, B. Rubio, A. Tarifeno-Saldivia, F. Calvino, G. Cortes, N. T. Brewer, B. C. Rasco, K. P. Rykaczewski, D. W. Stracener, J. M. Allmond, R. Grzywacz, R. Yokoyama, M. Singh, T. King, M. Madurga, S. Nishimura, V. H. Phong, S. Go, J. Liu, K. Matsui , et al. (41 additional authors not shown)

Abstract: A new detection system has been installed at the RIKEN Nishina Center (Japan) to investigate decay properties of very neutron-rich nuclei. The setup consists of three main parts: a moderated neutron counter, a detection system sensitive to the implantation and decay of radioactive ions, and gamma-ray detectors. We describe here the setup, the commissioning experiment and some selected results demo… ▽ More A new detection system has been installed at the RIKEN Nishina Center (Japan) to investigate decay properties of very neutron-rich nuclei. The setup consists of three main parts: a moderated neutron counter, a detection system sensitive to the implantation and decay of radioactive ions, and gamma-ray detectors. We describe here the setup, the commissioning experiment and some selected results demonstrating its performance for the measurement of half-lives and beta-delayed neutron emission probabilities. The methodology followed in the analysis of the data is described in detail. Particular emphasis is placed on the correction of the accidental neutron background. △ Less

Submitted 2 August, 2018; originally announced August 2018.

Biocompatible Two-dimensional Titanium Nanosheets for Efficient Plasmonic Photothermal Cancer Therapy

Authors: Zhongjian Xie, Shiyou Chen, Quan Liu, Zhitao Lin, Jinlai Zhao, Taojian Fan, Liping Liu, Shiyun Bao, Dianyuan Fan, Han Zhang

Abstract: Photothermal therapy (PTT) has shown significant potential in cancer treatment. However, developing nanomaterial-based photothermal agents with good biocompatibility and high photothermal conversion efficiency (PTCE) remains a key challenge. Titanium has been widely employed as biomedical materials based on their excellent biocompatibility. In this work, the titanium based plasmonic photothermal t… ▽ More Photothermal therapy (PTT) has shown significant potential in cancer treatment. However, developing nanomaterial-based photothermal agents with good biocompatibility and high photothermal conversion efficiency (PTCE) remains a key challenge. Titanium has been widely employed as biomedical materials based on their excellent biocompatibility. In this work, the titanium based plasmonic photothermal therapy (Ti-PPTT) is demonstrated. Using the liquid-phase exfoliation (LPE), the metallic Ti can be fabricated into the two-dimensional (2D) nanosheets (NSs), similar to exfoliating other layered 2D materials. The 2D Ti NSs exhibited good biocompatibility, high extinction coefficient of 20.8 Lg-1cm1 and high PTCE of 73.4%, owing to localized surface plasmon resonances (LSPR); which is significantly higher than other photothermal agents, including Au (21%), MoS2 (24.4%), BP (28.4%) and Ti3C2 MXene (30.6%). Consequently, 2D Ti-PPTT exhibited a notable therapeutic effect in a human hepatocellular carcinoma model without side effects. Our study could pave a new avenue for PTT using metal Ti and arouse a wide interest in the potential efficient PTT for other elemental transition metals owing to their LSPR. Furthermore, the efficient photothermal effect and environmental friendliness of Ti NSs make them deserve more research toward other application, such as solar energy harvesting and sea water desalination. △ Less

Submitted 4 May, 2018; originally announced May 2018.

First muon acceleration using a radio frequency accelerator

Authors: S. Bae, H. Choi, S. Choi, Y. Fukao, K. Futatsukawa, K. Hasegawa, T. Iijima, H. Iinuma, K. Ishida, N. Kawamura, B. Kim, R. Kitamura, H. S. Ko, Y. Kondo, S. Li, T. Mibe, Y. Miyake, T. Morishita, Y. Nakazawa, M. Otani, G. P. Razuvaev, N. Saito, K. Shimomura, Y. Sue, E. Won , et al. (1 additional authors not shown)

Abstract: Muons have been accelerated by using a radio frequency accelerator for the first time. Negative muonium atoms (Mu$^-$), which are bound states of positive muons ($μ^+$) and two electrons, are generated from $μ^+$'s through the electron capture process in an aluminum degrader. The generated Mu$^-$'s are initially electrostatically accelerated and injected into a radio frequency quadrupole linac (RF… ▽ More Muons have been accelerated by using a radio frequency accelerator for the first time. Negative muonium atoms (Mu$^-$), which are bound states of positive muons ($μ^+$) and two electrons, are generated from $μ^+$'s through the electron capture process in an aluminum degrader. The generated Mu$^-$'s are initially electrostatically accelerated and injected into a radio frequency quadrupole linac (RFQ). In the RFQ, the Mu$^-$'s are accelerated to 89 keV. The accelerated Mu$^-$'s are identified by momentum measurement and time of flight. This compact muon linac opens the door to various muon accelerator applications including particle physics measurements and the construction of a transmission muon microscope. △ Less

Submitted 21 March, 2018; originally announced March 2018.

Low-threshold optically pumped lasing in highly strained Ge nanowires

Authors: Shuyu Bao, Daeik Kim, Chibuzo Onwukaeme, Shashank Gupta, Krishna Saraswat, Kwang Hong Lee, Yeji Kim, Dabin Min, Yongduck Jung, Haodong Qiu, Hong Wang, Eugene A. Fitzgerald, Chuan Seng Tan, Donguk Nam

Abstract: The integration of efficient, miniaturized group IV lasers into CMOS architecture holds the key to the realization of fully functional photonic-integrated circuits. Despite several years of progress, however, all group IV lasers reported to date exhibit impractically high thresholds owing to their unfavorable bandstructures. Highly strained germanium with its fundamentally altered bandstructure ha… ▽ More The integration of efficient, miniaturized group IV lasers into CMOS architecture holds the key to the realization of fully functional photonic-integrated circuits. Despite several years of progress, however, all group IV lasers reported to date exhibit impractically high thresholds owing to their unfavorable bandstructures. Highly strained germanium with its fundamentally altered bandstructure has emerged as a potential low-threshold gain medium, but there has yet to be any successful demonstration of lasing from this seemingly promising material system. Here, we demonstrate a low-threshold, compact group IV laser that employs germanium nanowire under a 1.6% uniaxial tensile strain as the gain medium. The amplified material gain in strained germanium can sufficiently surmount optical losses at 83 K, thus allowing the first observation of multimode lasing with an optical pumping threshold density of ~3.0 kW cm^-^2. Our demonstration opens up a new horizon of group IV lasers for photonic-integrated circuits. △ Less

Submitted 15 August, 2017; originally announced August 2017.

Comments: 31 pages, 9 figures

Enhanced interlayer neutral excitons and trions in trilayer van der Waals heterostructures

Authors: Chanyeol Choi, Jiahui Huang, Hung-Chieh Cheng, Hyunseok Kim, Abhinav Kumar Vinod, Sang-Hoon Bae, V. Ongun Ozcelik, Roberto Grassi, Jongjae Chae, Shu-Wei Huang, Xiangfeng Duan, Kristen Kaasbjerg, Tony Low, Chee Wei Wong

Abstract: Vertically stacked van der Waals heterostructures constitute a promising platform for providing tailored band alignment with enhanced excitonic systems. Here we report observations of neutral and charged interlayer excitons in trilayer WSe2-MoSe2-WSe2 van der Waals heterostructures and their dynamics. The addition of a WSe2 layer in the trilayer leads to significantly higher photoluminescence quan… ▽ More Vertically stacked van der Waals heterostructures constitute a promising platform for providing tailored band alignment with enhanced excitonic systems. Here we report observations of neutral and charged interlayer excitons in trilayer WSe2-MoSe2-WSe2 van der Waals heterostructures and their dynamics. The addition of a WSe2 layer in the trilayer leads to significantly higher photoluminescence quantum yields and tunable spectral resonance compared to its bilayer heterostructures at cryogenic temperatures. The observed enhancement in the photoluminescence quantum yield is due to significantly larger electron-hole overlap and higher light absorbance in the trilayer heterostructure, supported via first-principle pseudopotential calculations based on spin-polarized density functional theory. We further uncover the temperature- and power-dependence, as well as time-resolved photoluminescence of the trilayer heterostructure interlayer neutral excitons and trions. Our study elucidates the prospects of manipulating light emission from interlayer excitons and designing atomic heterostructures from first-principles for optoelectronics. △ Less

Submitted 16 September, 2018; v1 submitted 19 June, 2017; originally announced June 2017.

Comments: 25 pages, 5 figures(Maintext). 9 pages, 7 figures(Supplementary Information). - Accepted for publication in npg: 2D materials and applications and reformatted to its standard. - Updated co-authors and references. - Title and abstract are modified for clarity. - Errors have been corrected, npg: 2D materials and applications (2018)

Nonlinear Zeeman effect, line shapes and optical pumping in electromagnetically induced transparency

Authors: Linjie Zhang, Shanxia Bao, Hao Zhang, Georg Raithel, Jianming Zhao, Liantuan Xiao, Suotang Jia

Abstract: We perform Zeeman spectroscopy on a Rydberg electromagnetically induced transparency (EIT) system in a room-temperature Cs vapor cell, in magnetic fields up to 50~Gauss and for several polarization configurations. The magnetic interactions of the $\vert 6S_{1/2}, F_g=4 \rangle$ ground, $\vert 6P_{3/2}, F_e=5 \rangle$ intermediate, and $\vert 33S_{1/2} \rangle$ Rydberg states that form the ladder-t… ▽ More We perform Zeeman spectroscopy on a Rydberg electromagnetically induced transparency (EIT) system in a room-temperature Cs vapor cell, in magnetic fields up to 50~Gauss and for several polarization configurations. The magnetic interactions of the $\vert 6S_{1/2}, F_g=4 \rangle$ ground, $\vert 6P_{3/2}, F_e=5 \rangle$ intermediate, and $\vert 33S_{1/2} \rangle$ Rydberg states that form the ladder-type EIT system are in the linear Zeeman, quadratic Zeeman, and the deep hyperfine Paschen-Back regimes, respectively. Starting in magnetic fields of about 5~Gauss, the spectra develop an asymmetry that becomes paramount in fields $\gtrsim40$~Gauss. We use a quantum Monte Carlo wave-function approach to quantitatively model the spectra. Simulated spectra are in good agreement with experimental data. The asymmetry in the spectra is, in part, due to level shifts caused by the quadratic Zeeman effect, but it also reflects the complicated interplay between optical pumping and EIT in the magnetic field. Relevance to measurement applications is discussed. %The simulations are also used to study optical pumping in the magnetic field and to investigate the interplay between optical pumping and EIT, which reduces photon scattering and optical pumping. △ Less

Submitted 30 May, 2017; v1 submitted 15 February, 2017; originally announced February 2017.

A Particle Model of Our Spacetime: Origin of Gravity

Authors: Saebyok Bae

Abstract: We build a model of our spacetime by assuming new particles called "space quanta." In the ambient or bulk spacetime ${\cal S}^{D_{\rm amb}}$ ($D_{\rm amb} \ge 4$), a multitude of space quanta form a nearly three-dimensional object, whose continuum approximation is called the space 3-brane. The world volume ${\cal WV}_{\rm sq}$ of this space 3-brane is described by an embedding… ▽ More We build a model of our spacetime by assuming new particles called "space quanta." In the ambient or bulk spacetime ${\cal S}^{D_{\rm amb}}$ ($D_{\rm amb} \ge 4$), a multitude of space quanta form a nearly three-dimensional object, whose continuum approximation is called the space 3-brane. The world volume ${\cal WV}_{\rm sq}$ of this space 3-brane is described by an embedding $f^A(x^μ) \in {\cal S}^{D_{\rm amb}}$, which produces the induced metric $γ_{μν}$ on the world volume ${\cal WV}_{\rm sq}$. This emergent spacetime (${\cal WV}_{\rm sq}, γ_{μν}$) from the many space quanta is proposed as the particle model of our spacetime. To study our spacetime (${\cal WV}_{\rm sq}, γ_{μν}$), we construct what we call the Aim-At-Target (AAT) method, which introduces an action for a 4D metric $g_{μν}$. This metric action from the AAT method can lead to General Relativity at low enough energies. The spacetime (${\cal S}_{\rm GR}, {\bf g}_{μν}$) of General Relativity is, at least, a good approximation to the exact or true spacetime (${\cal WV}_{\rm sq}, γ_{μν}$) of our universe. △ Less

Submitted 30 May, 2016; v1 submitted 18 May, 2016; originally announced May 2016.

Comments: 39 pages, 1 figure; minor changes and references added