-
Anticorrelated stereodynamics of scattering and sticking of H2 molecules colliding with a reactive surface
Authors:
H. Chadwick,
G. Zhang,
C. J. Baker,
P. L. Smith,
G. Alexandrowicz
Abstract:
When hydrogen molecules collide with a surface, they can either scatter away from the surface or stick to the surface through a dissociation reaction which leaves two H atoms adsorbed on the surface. The relative probabilities of these two potential outcomes can depend on the rotational orientation of the impinging molecules, however, direct measurements of this dependence were not available due t…
▽ More
When hydrogen molecules collide with a surface, they can either scatter away from the surface or stick to the surface through a dissociation reaction which leaves two H atoms adsorbed on the surface. The relative probabilities of these two potential outcomes can depend on the rotational orientation of the impinging molecules, however, direct measurements of this dependence were not available due to the difficulty of controlling the rotational orientation of ground state H2 molecules. Here, we use magnetic manipulation to achieve rotational orientation control of the molecules just before they collide with the surface, and show that molecules approaching the surface in a helicopter orientation have a higher probability to react and dissociate, whereas those which approach in a cartwheel orientation are more likely to scatter.
△ Less
Submitted 1 October, 2024;
originally announced October 2024.
-
Design and Performance of a Novel Low Energy Multi-Species Beamline for the ALPHA Antihydrogen Experiment
Authors:
C. J. Baker,
W. Bertsche,
A. Capra,
C. L. Cesar,
M. Charlton,
A. J. Christensen,
R. Collister,
A. Cridland Mathad,
S. Eriksson,
A. Evans,
N. Evetts,
S. Fabbri,
J. Fajans,
T. Friesen,
M. C. Fujiwara,
D. R. Gill,
P. Grandemange,
P. Granum,
J. S. Hangst,
M. E. Hayden,
D. Hodgkinson,
C. A. Isaac,
M. A. Johnson,
J. M. Jones,
S. A. Jones
, et al. (25 additional authors not shown)
Abstract:
The ALPHA Collaboration, based at the CERN Antiproton Decelerator, has recently implemented a novel beamline for low-energy ($\lesssim$ 100 eV) positron and antiproton transport between cylindrical Penning traps that have strong axial magnetic fields. Here, we describe how a combination of semianalytical and numerical calculations were used to optimise the layout and design of this beamline. Using…
▽ More
The ALPHA Collaboration, based at the CERN Antiproton Decelerator, has recently implemented a novel beamline for low-energy ($\lesssim$ 100 eV) positron and antiproton transport between cylindrical Penning traps that have strong axial magnetic fields. Here, we describe how a combination of semianalytical and numerical calculations were used to optimise the layout and design of this beamline. Using experimental measurements taken during the initial commissioning of the instrument, we evaluate its performance and validate the models used for its development. By combining data from a range of sources, we show that the beamline has a high transfer efficiency, and estimate that the percentage of particles captured in the experiments from each bunch is (78 $\pm$ 3)% for up to $10^{5}$ antiprotons, and (71 $\pm$ 5)% for bunches of up to $10^{7}$ positrons.
△ Less
Submitted 17 November, 2022;
originally announced November 2022.
-
Positron accumulation in the GBAR experiment
Authors:
P. Blumer,
M. Charlton,
M. Chung,
P. Clade,
P. Comini,
P. Crivelli,
O. Dalkarov,
P. Debu,
L. Dodd,
A. Douillet,
S. Guellati,
P. -A Hervieux,
L. Hilico,
P. Indelicato,
G. Janka,
S. Jonsell,
J. -P. Karr,
B. H. Kim,
E. S. Kim,
S. K. Kim,
Y. Ko,
T. Kosinski,
N. Kuroda,
B. M. Latacz,
B. Lee
, et al. (45 additional authors not shown)
Abstract:
We present a description of the GBAR positron (e+) trapping apparatus, which consists of a three stage Buffer Gas Trap (BGT) followed by a High Field Penning Trap (HFT), and discuss its performance. The overall goal of the GBAR experiment is to measure the acceleration of the neutral antihydrogen (H) atom in the terrestrial gravitational field by neutralising a positive antihydrogen ion (H+), whic…
▽ More
We present a description of the GBAR positron (e+) trapping apparatus, which consists of a three stage Buffer Gas Trap (BGT) followed by a High Field Penning Trap (HFT), and discuss its performance. The overall goal of the GBAR experiment is to measure the acceleration of the neutral antihydrogen (H) atom in the terrestrial gravitational field by neutralising a positive antihydrogen ion (H+), which has been cooled to a low temperature, and observing the subsequent H annihilation following free fall. To produce one H+ ion, about 10^10 positrons, efficiently converted into positronium (Ps), together with about 10^7 antiprotons (p), are required. The positrons, produced from an electron linac-based system, are accumulated first in the BGT whereafter they are stacked in the ultra-high vacuum HFT, where we have been able to trap 1.4(2) x 10^9 positrons in 1100 seconds.
△ Less
Submitted 9 May, 2022;
originally announced May 2022.
-
Study of Conduction Cooling Effects in Long Aspect Ratio Penning-Malmberg Micro-Traps
Authors:
M. A. Khamehchi,
C. J. Baker,
M. H. Weber,
K. G. Lynn
Abstract:
A first order perturbation with respect to velocity has been employed to find the frictional damping force imposed on a single moving charge due to a perturbative electric field, inside a long circular cylindrical trap. We find that the electric field provides a cooling effect, has a tensorial relationship with the velocity of the charge. A mathematical expression for the tensor field has been der…
▽ More
A first order perturbation with respect to velocity has been employed to find the frictional damping force imposed on a single moving charge due to a perturbative electric field, inside a long circular cylindrical trap. We find that the electric field provides a cooling effect, has a tensorial relationship with the velocity of the charge. A mathematical expression for the tensor field has been derived and numerically estimated. The corresponding drag forces for a charge moving close to the wall in a cylindrical geometry asymptotically approaches the results for a flat surface geometry calculated in the literature. Many particle conduction cooling power dissipation is formulated using the single particle analysis. Also the cooling rate for a weakly interacting ensemble is estimated. It is suggested that a pre-trap section with relatively high electrical resistivity can be employed to cool down low density ensembles of electrons/positrons before being injected into the trap. For a micro-trap with tens of thousands of micro-tubes, hundreds of thousands of particles can be cooled down in each cooling cycle. For example, tens of particles per micro-tube in a $5 cm$ long pre-trap section with the resistivity of $0.46 Ωm$ and the micro-tubes of radius $50 μm$ can be cooled down with the time constant of $106μs$.
△ Less
Submitted 12 July, 2013;
originally announced July 2013.
-
Simulation studies of the behavior of positrons in a microtrap with long aspect ratio
Authors:
Alireza Narimannezhad,
Christopher J. Baker,
Marc H. Weber,
Jia Xu,
Kelvin G. Lynn
Abstract:
The charged particles storage capacity of microtraps (micro-Penning-Malmberg traps) with large length to radius aspect ratios and radii of the order of tens of microns was explored. Simulation studies of the motions of charged particles were conducted with particle-in-cell WARP code and the Charged Particle Optics (CPO) program. The new design of the trap consisted of an array of microtraps with s…
▽ More
The charged particles storage capacity of microtraps (micro-Penning-Malmberg traps) with large length to radius aspect ratios and radii of the order of tens of microns was explored. Simulation studies of the motions of charged particles were conducted with particle-in-cell WARP code and the Charged Particle Optics (CPO) program. The new design of the trap consisted of an array of microtraps with substantially lower end electrodes potential than conventional Penning-Malmberg traps, which makes this trap quite portable. It was computationally shown that each microtrap with 50 micron radius stored positrons with a density (1.6x10^11 cm^-3) even higher than that in conventional Penning-Malmberg traps (about 10^11 cm^-3) while the confinement voltage was only 10 V. It was presented in this work how to evaluate and lower the numerical noise by controlling the modeling parameters so the simulated plasma can evolve toward computational equilibrium. The local equilibrium distribution, where longitudinal force balance is satisfied along each magnetic field line, was attained in time scales of the simulation for plasmas initialized with a uniform density and Boltzmann energy distribution. The charge clouds developed the expected radial soft edge density distribution and rigid rotation evolved to some extent. To reach global equilibrium (i.e. rigid rotation) longer runs are required. The plasma confinement time and its thermalization were independent of the length. The length-dependency, reported in experiments, is due to fabrication and field errors. Computationally, more than one hundred million positrons were trapped in one microtrap with 50 micron radius and 10 cm length immersed in a 7 T uniform, axial magnetic field, and the density scaled as r^-2 down to 3 micron. Larger densities were trapped with higher barrier potentials.
△ Less
Submitted 9 July, 2013; v1 submitted 31 December, 2012;
originally announced January 2013.
