Showing 1–30 of 30 results for author: Bai, H

Skin modes tunability and self-healing effect in photonic Floquet lattices

Authors: Hua-Yu Bai, Yang Chen, Tian-Yang Zhang, Guang-Can Guo, Ming Gong, Xi-Feng Ren

Abstract: Non-Hermitian systems can exhibit a number of intriguing physics not presented by the Hermitian models, including skin effect, non-Bloch bands, generalized bulk-edge correspondence and self-healing effect (SHE). In this manuscript, we demonstrate that when eigenstates are fully localized at one boundary, the biorthogonal normalization of left and right eigenstates enables the tunability of skin mo… ▽ More Non-Hermitian systems can exhibit a number of intriguing physics not presented by the Hermitian models, including skin effect, non-Bloch bands, generalized bulk-edge correspondence and self-healing effect (SHE). In this manuscript, we demonstrate that when eigenstates are fully localized at one boundary, the biorthogonal normalization of left and right eigenstates enables the tunability of skin modes through local potential modulation at the opposite boundary,a phenomenon termed as skin mode tunability, exclusive to non-Hermitian systems. With this technique, we show that certain skin modes are highly susceptible to the local potential, allowing wide-range control over the eigenvalues' imaginary components. We demonstrate these results utilizing a finite system of $L=100$ coupled waveguides and show that the SHE can be engineered and realized on this platform with experimentally accessible parameters. This research sheds new light on the distinctive behavior of non-Hermitian skin modes, and introduces a local tuning approach for skin modes, paving the way for engineering localized skin modes in non-Hermitian systems. △ Less

Submitted 5 July, 2025; originally announced July 2025.

Hybrid deep learning and iterative methods for accelerated solutions of viscous incompressible flow

Authors: Heming Bai, Xin Bian

Abstract: The pressure Poisson equation, central to the fractional step method in incompressible flow simulations, incurs high computational costs due to the iterative solution of large-scale linear systems. To address this challenge, we introduce HyDEA, a novel framework that synergizes deep learning with classical iterative solvers. It leverages the complementary strengths of a DeepONet - capable of captu… ▽ More The pressure Poisson equation, central to the fractional step method in incompressible flow simulations, incurs high computational costs due to the iterative solution of large-scale linear systems. To address this challenge, we introduce HyDEA, a novel framework that synergizes deep learning with classical iterative solvers. It leverages the complementary strengths of a DeepONet - capable of capturing large-scale features of the solution - and the CG or a PCG method, which efficiently resolves fine-scale errors. Specifically, within the framework of line-search methods, the DeepONet predicts search directions to accelerate convergence in solving sparse, symmetric-positive-definite linear systems, while the CG/ PCG method ensures robustness through iterative refinement. The framework seamlessly extends to flows over solid structures via the decoupled immersed boundary projection method. Crucially, the DeepONet is trained on fabricated linear systems rather than flow specific data, endowing it with inherent generalization across geometric complexities and Reynolds numbers without retraining. Benchmarks demonstrate superior efficiency and accuracy of HyDEA over the CG/PCG methods for flows with no obstacles, single or multiple stationary obstacles, and one moving obstacle - using fixed network weights. Remarkably, HyDEA also exhibits super-resolution capability: although the DeepONet is trained on a 128*128 grid for Re=1000, the hybrid solver delivers accurate solutions on a 512*512 grid for Re=10000 via interpolation, despite discretizations mismatch. In contrast, a purely data-driven DeepONet fails for complex flows, underscoring the necessity of hybridizing deep learning with iterative methods. Robustness, efficiency, and generalization across geometries, resolutions, and Reynolds numbers of HyDEA highlight its potential as a transformative solver for real world fluid dynamics problems. △ Less

Submitted 3 June, 2025; originally announced June 2025.

Reentrant phase transition in quasiperiodic photonic waveguides

Authors: Yang Chen, Ze-Zheng Li, Hua-Yu Bai, Shuai-Peng Guo, Tian-Yang Zhang, Xu-Lin Zhang, Qi-Dai Chen, Guang-Can Guo, Fang-Wen Sun, Zhen-Nan Tian, Ming Gong, Xi-Feng Ren, Hong-Bo Sun

Abstract: Anderson transition in quasiperiodic potentials and the associated mobility edges have been a central focus in quantum simulation across multidisciplinary physical platforms. While these transitions have been experimentally observed in ultracold atoms, acoustic systems, optical waveguides, and superconducting junctions, their interplay between quasiperiodic potential and long-range hopping remains… ▽ More Anderson transition in quasiperiodic potentials and the associated mobility edges have been a central focus in quantum simulation across multidisciplinary physical platforms. While these transitions have been experimentally observed in ultracold atoms, acoustic systems, optical waveguides, and superconducting junctions, their interplay between quasiperiodic potential and long-range hopping remains unexplored experimentally. In this work, we report the observation of localization-delocalization transition induced by the hopping between the next-nearest neighboring sites using quasiperiodic photonic waveguides. Our findings demonstrate that increasing the next-nearest hopping strength induces a reentrant phase transition, where the system transitions from an initially extended phase into a localized phase before eventually returning to an extended phase. This remarkable interplay between hopping and quasiperiodic potential in the lattice models provides crucial insights into the mechanism of Anderson transition. Furthermore, our numerical simulation reveals that this phase transition exhibits a critical exponent of $ν\simeq 1/3$, which is experimentally observable for system sizes $L\sim10^3$ - $10^4$. These results establish a framework for direct observation of the Anderson transition and precise determination of its critical exponents, which can significantly advance our understanding of localization physics in quasiperiodic systems. △ Less

Submitted 16 April, 2025; originally announced April 2025.

Comments: 16 pages, 5 figures

Observation of Coherent Quantum Tunneling of a Massive Atomic Cluster with 435 u

Authors: Han Zhang, Yong-Kui Wang, Yi Zheng, Hai-Tao Bai, Bing Yang

Abstract: Tunneling is a genuine quantum phenomenon typically observed in low-mass particles such as electrons. However, it fades rapidly as mass increases due to the exponential decay of the matter-wave penetration depth. Cooling atoms to nanokelvin temperatures enhances their matter wave characteristics. Here, we report the observation of coherent quantum tunneling of a bonded cluster composed of 5 ultrac… ▽ More Tunneling is a genuine quantum phenomenon typically observed in low-mass particles such as electrons. However, it fades rapidly as mass increases due to the exponential decay of the matter-wave penetration depth. Cooling atoms to nanokelvin temperatures enhances their matter wave characteristics. Here, we report the observation of coherent quantum tunneling of a bonded cluster composed of 5 ultracold rubidium-87 atoms, collectively forming a massive object of 435 u. Using a double-well superlattice, integer occupancy states are prepared, with atoms bonded via strong on-site interactions. We demonstrate that the exponential base of tunneling strength can be tuned to approach unity, drastically reducing its decay for heavier masses and enabling a scalable strategy. Moreover, tunneling is harnessed to create spatially separated Schrödinger-cat states (~320 nm apart), achieving quantum enhancement in measurements. This work markedly raises the mass threshold for quantum tunneling and paves the way for quantum metrology with massive particles. △ Less

Submitted 10 February, 2025; originally announced February 2025.

Comments: 15 pages, 11 figures

Downscaling Precipitation with Bias-informed Conditional Diffusion Model

Authors: Ran Lyu, Linhan Wang, Yanshen Sun, Hedanqiu Bai, Chang-Tien Lu

Abstract: Climate change is intensifying rainfall extremes, making high-resolution precipitation projections crucial for society to better prepare for impacts such as flooding. However, current Global Climate Models (GCMs) operate at spatial resolutions too coarse for localized analyses. To address this limitation, deep learning-based statistical downscaling methods offer promising solutions, providing high… ▽ More Climate change is intensifying rainfall extremes, making high-resolution precipitation projections crucial for society to better prepare for impacts such as flooding. However, current Global Climate Models (GCMs) operate at spatial resolutions too coarse for localized analyses. To address this limitation, deep learning-based statistical downscaling methods offer promising solutions, providing high-resolution precipitation projections with a moderate computational cost. In this work, we introduce a bias-informed conditional diffusion model for statistical downscaling of precipitation. Specifically, our model leverages a conditional diffusion approach to learn distribution priors from large-scale, high-resolution precipitation datasets. The long-tail distribution of precipitation poses a unique challenge for training diffusion models; to address this, we apply gamma correction during preprocessing. Additionally, to correct biases in the downscaled results, we employ a guided-sampling strategy to enhance bias correction. Our experiments demonstrate that the proposed model achieves highly accurate results in an 8 times downscaling setting, outperforming previous deterministic methods. The code and dataset are available at https://github.com/RoseLV/research_super-resolution △ Less

Submitted 19 December, 2024; originally announced December 2024.

Comments: 3 pages, 2 figures. Accepted by Proceedings of IEEE International Conference on Big Data, Dec 15-18, 2024

Enhanced $Q$ factor and robustness of photonic bound states in the continuum merging at locally bent trajectories

Authors: Huayu Bai, Andriy Shevchenko, Radoslaw Kolkowski

Abstract: Bound states in the continuum (BICs) in planar photonic structures have attracted broad scientific interest owing to their exceptional capability to confine light. Topological robustness of certain BICs allows them to be moved in the momentum space by tuning the geometric parameters of the structure. In this work, we study such a BIC in a one-dimensional periodic grating, and find that its momentu… ▽ More Bound states in the continuum (BICs) in planar photonic structures have attracted broad scientific interest owing to their exceptional capability to confine light. Topological robustness of certain BICs allows them to be moved in the momentum space by tuning the geometric parameters of the structure. In this work, we study such a BIC in a one-dimensional periodic grating, and find that its momentum-space position can be made a non-monotonic function of a geometric parameter, forming a locally bent ''V''-shaped trajectory. We show that, near the turning point of this trajectory, the robustness of the BIC and its $Q$ factor can be greatly enhanced. We tune such ''V-BICs'' to almost merge with a symmetry-protected BIC at the $Γ$-point. This creates a ''K''-shaped ultrahigh-$Q$ region containing a BIC with a much higher and more stable $Q$ factor compared to the ordinary merging BICs. The ''K-BICs'' are also found to provide a strong enhancement of the $Q$ factor in finite gratings over an extremely wide range of geometric parameters. Our findings enable further advancements in the development of ultrahigh-$Q$ BICs and their applications. △ Less

Submitted 3 December, 2024; v1 submitted 1 December, 2024; originally announced December 2024.

Comments: 5 pages, 4 figures

Lead-free Hybrid Perovskite: An Efficient Room Temperature Spin Generator via Large Interfacial Rashba effect

Authors: Lei Han, Qian Wang, Ying Lu, Sheng Tao, Wenxuan Zhu, Xiaoyu Feng, Shixuan Liang, Hua Bai, Chong Chen, Kai Wang, Zhou Yang, Xiaolong Fan, Cheng Song, Feng Pan

Abstract: Two-dimensional (2D) hybrid organic-inorganic perovskite (HOIP) demonstates great potential for developing flexible and wearable spintronic devices, by serving as spin sources via the bulk Rashba effect (BRE). However, the practical application of BRE in 2D HOIP faces huge challenges, particularly due to the toxicity of lead, which is crucial for achieving large spin-orbit coupling, and the restri… ▽ More Two-dimensional (2D) hybrid organic-inorganic perovskite (HOIP) demonstates great potential for developing flexible and wearable spintronic devices, by serving as spin sources via the bulk Rashba effect (BRE). However, the practical application of BRE in 2D HOIP faces huge challenges, particularly due to the toxicity of lead, which is crucial for achieving large spin-orbit coupling, and the restrictions in 2D HOIP candidates to meet specific symmetry-breaking requirements. To overcome these obstacles, we design a strategy to exploit the interfacial Rashba effect (IRE) of lead-free 2D HOIP (C6H5CH2CH2NH3)2CuCl4 (PEA-CuCl), manifesting as an efficient spin generator at room temperature. IRE of PEA-CuCl originates from the large orbital hybridization at the interface between PEA-CuCl and adjacent ferromagnetic layers. Spin-torque ferromagnetic resonance measurements further quantify a large Rashba effective field of 14.04 Oe per 10^11 A m-2, surpassing those of lead-based HOIP and traditional all-inorganic heterojunctions with noble metals. Our lead-free 2D HOIP PEA-CuCl, which harnesses large IRE for spin generation, is efficient, nontoxic, and economic, offering huge promise for future flexible and wearable spintronic devices. △ Less

Submitted 24 October, 2024; originally announced October 2024.

Electrical detection in two-terminal perpendicularly magnetized devices via geometric anomalous Nernst effect

Authors: Jiuming Liu, Bin Rong, Hua Bai, Xinqi Liu, Yanghui Liu, Yifan Zhang, Yujie Xiao, Yuzhen Liang, Qi Yao, Liyang Liao, Yumeng Yang, Cheng Song, Xufeng Kou

Abstract: The non-uniform current distribution arisen from either current crowding effect or hot spot effect provides a method to tailor the interaction between thermal gradient and electron transport in magnetically ordered systems. Here we apply the device structural engineering to realize an in-plane inhomogeneous temperature distribution within the conduction channel, and the resulting geometric anomalo… ▽ More The non-uniform current distribution arisen from either current crowding effect or hot spot effect provides a method to tailor the interaction between thermal gradient and electron transport in magnetically ordered systems. Here we apply the device structural engineering to realize an in-plane inhomogeneous temperature distribution within the conduction channel, and the resulting geometric anomalous Nernst effect (GANE) gives rise to a non-zero 2nd -harmonic resistance whose polarity corresponds to the out-of-plane magnetization of Co/Pt multi-layer thin film, and its amplitude is linearly proportional to the applied current. By optimizing the aspect ratio of convex-shaped device, the effective temperature gradient can reach up to 0.3 K/$μ$m along the y-direction, leading to a GANE signal of 28.3 $μ$V. Moreover, we demonstrate electrical write and read operations in the perpendicularly-magnetized Co/Pt-based spin-orbit torque device with a simple two-terminal structure. Our results unveil a new pathway to utilize thermoelectric effects for constructing high-density magnetic memories △ Less

Submitted 14 September, 2024; originally announced September 2024.

Gateway to all-optical spin switching in Heusler ferrimagnets: Pancharatnam-Berry tensor and magnetic moment ratio

Authors: G. P. Zhang, Y. Q. Liu, M. S. Si, Nicholas Allbritton, Y. H. Bai, Wolfgang Hübner, Thomas F. George

Abstract: All-optical spin switching (AOS) is a new phenomenon found in a small group of magnetic media, where a single laser pulse can switch spins from one direction to another, without assistance of a magnetic field, on a time scale much shorter than existing magnetic technology. However, despite intensive efforts over a decade, its underlying working principle remains elusive. Here through manganese-bas… ▽ More All-optical spin switching (AOS) is a new phenomenon found in a small group of magnetic media, where a single laser pulse can switch spins from one direction to another, without assistance of a magnetic field, on a time scale much shorter than existing magnetic technology. However, despite intensive efforts over a decade, its underlying working principle remains elusive. Here through manganese-based Heusler ferrimagnets, we show that a group of flat bands around the Fermi level act as gateway states to form efficient channels or spin switching, where their noncentrosymmetry allows us to correlate the spin dynamics to the second-order optical response. To quantify their efficacy, we introduce the third-rank Pancharatnam-Berry tensor (PB tensor), $\boldsymbolη^{(3)}=\langle i |{\bf p} |m\rangle \langle m|{\bf p} |f\rangle \langle f|{\bf p} |i\rangle,$ where $|i\rangle$, $|m\rangle$ and $|f\rangle$ are initial, intermediate and final band states, respectively, and ${\bf p}$ is the momentum operator. A picture emerges: Those which show AOS, such as the recently discovered Mn$_2$RuGa, always have a large PB tensor element} but have a small sublattice spin moment ratio, consistent with the prior experimental small remanence criterion. This does not only reveal that the delicate balance between the large PB tensor element and the small sublattice spin ratio plays a decisive role in AOS, but also, conceptually, connects the $n$th-order nonlinear optics to $(n+1)$th-rank PB tensors in general. △ Less

Submitted 16 June, 2024; originally announced June 2024.

Comments: 20 pages, four figures. Published in Physical Review B Letters

Data-driven modeling of unsteady flow based on deep operator network

Authors: Heming Bai, Zhicheng Wang, Xuesen Chu, Jian Deng, Xin Bian

Abstract: Time-dependent flow fields are typically generated by a computational fluid dynamics (CFD) method, which is an extremely time-consuming process. However, the latent relationship between the flow fields is governed by the Navier-Stokes equations and can be described by an operator. We therefore train a deep operator network, or simply DeepONet, to learn the temporal evolution between flow snapshots… ▽ More Time-dependent flow fields are typically generated by a computational fluid dynamics (CFD) method, which is an extremely time-consuming process. However, the latent relationship between the flow fields is governed by the Navier-Stokes equations and can be described by an operator. We therefore train a deep operator network, or simply DeepONet, to learn the temporal evolution between flow snapshots. Once properly trained, given a few consecutive snapshots as input, the network has a great potential to generate the next snapshot accurately and quickly. Using the output as a new input, the network iterates the process, generating a series of successive snapshots with little wall time. Specifically, we consider 2D flow around a circular cylinder at Reynolds number 1000, and prepare a set of high-fidelity data using a high-order spectral/hp element method as ground truth. Although the flow fields are periodic, there are many small-scale features in the wake flow that are difficult to generate accurately. Furthermore, any discrepancy between the prediction and the ground truth for the first snapshots can easily accumulate during the iterative process, which eventually amplifies the overall deviations. Therefore, we propose two alternative techniques to improve the training of DeepONet. The first one enhances the feature extraction of the network by harnessing the "multi-head non-local block". The second one refines the network parameters by leveraging the local smooth optimization technique. Both techniques prove to be highly effective in reducing the cumulative errors and our results outperform those of the dynamic mode decomposition method. △ Less

Submitted 10 April, 2024; originally announced April 2024.

Electrical-controllable antiferromagnet-based tunnel junction

Authors: Lei Han, Xuming Luo, Yingqian Xu, Hua Bai, Wenxuan Zhu, Yuxiang Zhu, Guoqiang Yu, Cheng Song, Feng Pan

Abstract: Electrical-controllable antiferromagnet tunnel junction is a key goal in spintronics, holding immense promise for ultra-dense and ultra-stable antiferromagnetic memory with high processing speed for modern information technology. Here, we have advanced towards this goal by achieving an electrical-controllable antiferromagnet-based tunnel junction of Pt/Co/Pt/Co/IrMn/MgO/Pt. The exchange coupling b… ▽ More Electrical-controllable antiferromagnet tunnel junction is a key goal in spintronics, holding immense promise for ultra-dense and ultra-stable antiferromagnetic memory with high processing speed for modern information technology. Here, we have advanced towards this goal by achieving an electrical-controllable antiferromagnet-based tunnel junction of Pt/Co/Pt/Co/IrMn/MgO/Pt. The exchange coupling between antiferromagnetic IrMn and Co/Pt perpendicular magnetic multilayers results in the formation of interfacial exchange bias and exchange spring in IrMn. Encoding information states 0 and 1 is realized through the exchange spring in IrMn, which can be electrically written by spin-orbit torque switching with high cyclability and electrically read by antiferromagnetic tunneling anisotropic magnetoresistance. Combining spin-orbit torque switching of both exchange spring andexchange bias, 16 Boolean logic operation is successfully demonstrated. With both memory and logic functionalities integrated into our electrical-controllable antiferromagnetic-based tunnel junction, we chart the course toward high-performance antiferromagnetic logic-in-memory. △ Less

Submitted 1 April, 2024; originally announced April 2024.

Comments: 20 pages, 4 figures

Recovery of topologically robust merging bound states in the continuum in photonic structures with broken symmetry

Authors: Huayu Bai, Andriy Shevchenko, Radoslaw Kolkowski

Abstract: Optical bound states in the continuum (BICs) provide a unique mechanism of light confinement that holds great potential for fundamental and applied research in optics and photonics. Of particular interest are merging BICs realized in planar periodic structures by merging accidental and symmetry-protected BICs. Topological nature of merging BICs renders their $Q$ factors exceptionally high and robu… ▽ More Optical bound states in the continuum (BICs) provide a unique mechanism of light confinement that holds great potential for fundamental and applied research in optics and photonics. Of particular interest are merging BICs realized in planar periodic structures by merging accidental and symmetry-protected BICs. Topological nature of merging BICs renders their $Q$ factors exceptionally high and robust. However, the existence of accidental BICs relies on the up-down mirror symmetry of the structure. If this symmetry is broken, e.g., by a substrate, the $Q$ factor of the mode drops down. Consequently, ultrahigh-$Q$ merging BICs cannot be achieved in substrate-supported structures. Here, by studying the case of a one-dimensional periodic dielectric grating, we discover a simple method to fully compensate for the detrimental effect of breaking the up-down mirror symmetry. The method makes use of a thin layer of a high-refractive-index dielectric material on one side of the structure, allowing one to restore the diverging $Q$ factor of the accidental BIC and fully recover the merged BIC. By investigating the far-field polarization patterns of the modified gratings, we show that the integer-charge polarization vortices of the accidental BICs are restored by intersecting the momentum-space trajectories of circularly polarized half-vortices simultaneously in the upward and downward radiation directions. Our approach can enable flexible design, feasible realization, and extended applications of topologically robust BICs in various systems. △ Less

Submitted 5 November, 2024; v1 submitted 29 January, 2024; originally announced January 2024.

Simulation study of intra-beam scattering effect in the HALF storage ring with Piwinski model

Authors: C. W. Luo, P. H. Yang, G. W. Liu, W. W. Li, N. Hu, W. M. Li, Z. H. Bai, L. Wang

Abstract: The Hefei Advanced Light Facility (HALF) will be a VUV and soft X-ray diffraction-limited storage ring (DLSR), and its high density of electron bunches makes the intra-beam scattering (IBS) effect very serious. In this paper, an IBS module used in the IMPACT code is developed, where the scattering process of IBS is described by the Piwinski model in Monte Carlo sampling. For benchmarking, the IMPA… ▽ More The Hefei Advanced Light Facility (HALF) will be a VUV and soft X-ray diffraction-limited storage ring (DLSR), and its high density of electron bunches makes the intra-beam scattering (IBS) effect very serious. In this paper, an IBS module used in the IMPACT code is developed, where the scattering process of IBS is described by the Piwinski model in Monte Carlo sampling. For benchmarking, the IMPACT code with IBS module is compared with the ELEGANT code and a semi-analytic code using Bane's model. Then, the results of IBS effect in the HALF storage ring studied by this new code are presented. With various countermeasures, the IBS impact can be controlled to a certain extent, and the expected beam emittance is approximately 59 pm.rad. △ Less

Submitted 26 November, 2023; originally announced November 2023.

Comments: 10 pages,6 figures,3 tables,Journal

Ultra-clean assembly of van der Waals heterostructures

Authors: Wendong Wang, Nicholas Clark, Matthew Hamer, Amy Carl, Endre Tovari, Sam Sullivan-Allsop, Evan Tillotson, Yunze Gao, Hugo de Latour, Francisco Selles, James Howarth, Eli G. Castanon, Mingwei Zhou, Haoyu Bai, Xiao Li, Astrid Weston, Kenji Watanabe, Takashi Taniguchi, Cecilia Mattevi, Thomas H. Bointon, Paul V. Wiper, Andrew J. Strudwick, Leonid A. Ponomarenko, Andrey Kretinin, Sarah J. Haigh , et al. (2 additional authors not shown)

Abstract: Layer-by-layer assembly of van der Waals (vdW) heterostructures underpins new discoveries in solid state physics, material science and chemistry. Despite the successes, all current 2D material (2DM) transfer techniques rely on the use of polymers which limit the cleanliness, ultimate electronic performance, and potential for optoelectronic applications of the heterostructures. In this article, we… ▽ More Layer-by-layer assembly of van der Waals (vdW) heterostructures underpins new discoveries in solid state physics, material science and chemistry. Despite the successes, all current 2D material (2DM) transfer techniques rely on the use of polymers which limit the cleanliness, ultimate electronic performance, and potential for optoelectronic applications of the heterostructures. In this article, we present a novel polymer-free platform for rapid and facile heterostructure assembly which utilises re-usable flexible silicon nitride membranes. We demonstrate that this allows fast and reproducible production of 2D heterostructures using both exfoliated and CVD-grown materials with perfect interfaces free from interlayer contamination and correspondingly excellent electronic behaviour, limited only by the size and intrinsic quality of the crystals used. Furthermore, removing the need for polymeric carriers allows new possibilities for vdW heterostructure fabrication: assembly at high temperatures up to 600°C, and in different environments including ultra-high vacuum (UHV) and when the materials are fully submerged in liquids. We demonstrate UHV heterostructure assembly for the first time, and show the reliable creation of graphene moiré superlattices with more than an order of magnitude improvement in their structural homogeneity. We believe that broad adaptation of our novel inorganic 2D materials assembly strategy will allow realisation of the full potential of vdW heterostructures as a platform for new physics and advanced optoelectronic technologies. △ Less

Submitted 25 August, 2023; originally announced August 2023.

Comments: 23 pages, 4 figures

Journal ref: Nature Electronics, 2023

Multifocal laser direct writing through spatial light modulation guided by scalable vector graphics

Authors: Linhan Duan, Yueqiang Zhu, Haoxin Bai, Chen Zhang, Kaige Wang, Jintao Bai, Wei Zhao

Abstract: Multifocal laser direct writing (LDW) based on phase-only spatial light modulator (SLM) can realize flexible and parallel nanofabrication with high throughput potential. In this investigation, a novel approach of combining two-photon absorption, SLM and vector path guided by scalable vector graphics (SVG) has been developed and tested preliminarily, for fast, flexible and parallel nanofabrication.… ▽ More Multifocal laser direct writing (LDW) based on phase-only spatial light modulator (SLM) can realize flexible and parallel nanofabrication with high throughput potential. In this investigation, a novel approach of combining two-photon absorption, SLM and vector path guided by scalable vector graphics (SVG) has been developed and tested preliminarily, for fast, flexible and parallel nanofabrication. Three laser focuses are independently controlled with different paths, which are according to SVG, to optimize fabrication and promote time efficiency. The minimum structure width can be as low as 74 nm. Accompanied with a translation stage, a carp structure of 18.16 $μ$m by 24.35 $μ$m has been fabricated. This method shows the possibility of developing LDW techniques towards full-electrical system, and provides a potential way to efficiently engrave complex structures on nanoscales. △ Less

Submitted 13 February, 2023; originally announced April 2023.

Transition routes of electrokinetic flow in a divergent microchannel with bending walls

Authors: Yanxia Shi, Ming Zeng, Haoxin Bai, Shuangshuang Meng, Chen Zhang, Xiaoqiang Feng, Ce Zhang, Kaige Wang, Wei Zhao

Abstract: Electrokinetic flow can be generated as a highly coupled phenomenon among velocity field, electric conductivity field and electric field. It can exhibit different responses to AC electric fields in different frequency regimes, according to different instability/receptivity mechanisms. In this investigation, by both flow visualization and single-point laser-induced fluorescence (LIF) method, the re… ▽ More Electrokinetic flow can be generated as a highly coupled phenomenon among velocity field, electric conductivity field and electric field. It can exhibit different responses to AC electric fields in different frequency regimes, according to different instability/receptivity mechanisms. In this investigation, by both flow visualization and single-point laser-induced fluorescence (LIF) method, the response of AC electrokinetic flow and the transition routes towards chaos and turbulence have been experimentally investigated. It is found, when the AC frequency $f_f<30$ Hz, the interface responds at both the neutral frequency of the basic flow and the AC frequency. However, when $f_f>=30$ Hz, the interface responds only at the neutral frequency of the basic flow. Both periodic doubling and subcritical bifurcations have been observed in the transition of AC electrokinetic flow. We hope the current investigation can promote our current understanding on the ultrafast transition process of electrokinetic flow from laminar state to turbulence. △ Less

Submitted 20 January, 2023; originally announced January 2023.

Fluorescent property of carbon dots extracted from cigarette smoke and the application in bio-imaging

Authors: Yuzhao Li, Han Bai, Jin Zhang, Ju Tang, Yingfu Li, Weizuo Zhang, Zhexian Zhao, Yiming Xiao, Yanfei Lü

Abstract: Cigarette smoke is one of the six major pollution sources in the room air. It contains large number of particles with size less than 10 nm. There exist carbon dots (CDs) in cigarette smoke which have strong fluorescence and with good bio-compatibility and low toxicity. CDs in cigarette smoke can be applied in bio-imaging which has great potential applications in the integration of cancer diagnosis… ▽ More Cigarette smoke is one of the six major pollution sources in the room air. It contains large number of particles with size less than 10 nm. There exist carbon dots (CDs) in cigarette smoke which have strong fluorescence and with good bio-compatibility and low toxicity. CDs in cigarette smoke can be applied in bio-imaging which has great potential applications in the integration of cancer diagnosis and treatment. In this paper, CDs were extracted from cigarette smoke. Then, sodium borohydride was added to CDs aqueous solution for reduction and the reduced CDs (R-CDs) were used for biological cell imaging. The results indicate that the CDs with the particle size $<$10 nm in cigarette smoke are self-assembled by the polymerizated polycyclic aromatic hydrocarbons (PAHs) and ammonium nitrite which are disk nano-structure composed of $sp^2$/$sp^3$ carbon and oxygen/nitrogen groups or polymers. Sodium borohydride can reduce the carbonyl group on the surface of CDs to hydroxyl group and increase the ratio of the Na 1s ratio of the CDs from 1.86 to 7.42. The CDs can emit blue fluorescence under ultraviolet irradiation. After reduction, the R-CDS have the intensity of fluorescence 7.2 times than before and the fluorescence quantum yield increase from 6.13\% to 8.86\%. The photoluminescence (PL) wavelength of R-CDS have red-shift of 7 nm which was due to the increasing of Na element ratio. The onion epidermal cells labeled with R-CDs show that the CDs could pass through the cell wall into the cell and reach the nucleus. The cell wall and the nucleus could be clearly visualized. CDs also shows low toxicity to human bronchial epithelial cells (BEAS-2B) with good biological activity. The obtained results indicate that the CDs and R-CDs have good fluorescent property which could be used as bio-imaging agent. △ Less

Submitted 15 December, 2022; v1 submitted 9 December, 2022; originally announced December 2022.

Comments: 12 pages, 9 figures

Journal ref: Optics Express 30(26), 47026-47037 (2022)

Laser-induced forces on atoms during ultrafast demagnetization

Authors: G. P. Zhang, Y. H. Bai

Abstract: Laser-induced femtosecond demagnetization has attracted a broad attention as a possible candidate for information storage technology. However, whether or not lattice vibration directly participates in demagnetization has been highly controversial over a decade. A recent electron diffraction experiment attributed the demagnetization to the polarized phonon effect, but a similar x-ray diffraction ex… ▽ More Laser-induced femtosecond demagnetization has attracted a broad attention as a possible candidate for information storage technology. However, whether or not lattice vibration directly participates in demagnetization has been highly controversial over a decade. A recent electron diffraction experiment attributed the demagnetization to the polarized phonon effect, but a similar x-ray diffraction experiment attributed it to the Einstein-de Haas effect. Common to both experiments is that neither the angular momentum of the lattice nor the rotation of the sample was directly probed. Here, we report our first first-principles calculation of forces on atoms induced by an ultrafast laser during ultrafast demagnetization. We employ two complementary methods: (i) the frozen lattice with electronic excitation and (ii) frozen excitation but moving the lattice. We find that the forces on atoms start at -50 fs and peak around 30 fs. The magnitude of the force is far smaller than the empirical estimates. Within the limit of our theory, our results suggest that the polarized phonon effect and the Einstein-de Haas effect are unlikely to be the main course of demagnetization. We expect that our finding has a profound impact on the future direction of laser-induced dynamics in magnetic and quantum materials. △ Less

Submitted 3 September, 2022; originally announced September 2022.

Comments: 18 pages, four figures

First-principles insights into all-optical spin switching in the half-metallic Heusler ferrimagnet Mn$_2$RuGa

Authors: G. P. Zhang, Y. H. Bai, M. S. Si, Thomas F. George

Abstract: All-optical spin switching (AOS) represents a new frontier in magnetic storage technology -- spin manipulation without a magnetic field, -- but its underlying working principle is not well understood. Many AOS ferrimagnets such as GdFeCo are amorphous and renders the high-level first-principles study unfeasible. The crystalline half-metallic Heusler Mn$_2$RuGa presents an opportunity. Here we carr… ▽ More All-optical spin switching (AOS) represents a new frontier in magnetic storage technology -- spin manipulation without a magnetic field, -- but its underlying working principle is not well understood. Many AOS ferrimagnets such as GdFeCo are amorphous and renders the high-level first-principles study unfeasible. The crystalline half-metallic Heusler Mn$_2$RuGa presents an opportunity. Here we carry out hitherto the comprehensive density functional investigation into the material properties of Mn$_2$RuGa, and introduce two concepts - the spin anchor site and the optical active site - as two pillars for AOS in ferrimagnets. In Mn$_2$RuGa, Mn$(4a)$ serves as the spin anchor site, whose band structure is below the Fermi level and has a strong spin moment, while Mn$(4c)$ is the optical active site whose band crosses the Fermi level. Our magneto-optical Kerr spectrum and band structure calculation jointly reveal that the delicate competition between the Ru-$4d$ and Ga-$4p$ states is responsible for the creation of these two sites. These two sites found here not only present a unified picture for both Mn$_2$RuGa and GdFeCo, but also open the door for the future applications. Specifically, we propose a Mn$_2$Ru$_x$Ga-based magnetic tunnel junction where a single laser pulse can control magnetoresistance. △ Less

Submitted 21 July, 2022; originally announced July 2022.

Comments: 21 pages, 3 figures, published on February 25, (2022). Supplementary materials provided at the publisher's link

Journal ref: Physical Review B 105, 054431 (2022)

Incorporation of density scaling constraint in density functional design via contrastive representation learning

Authors: Weiyi Gong, Tao Sun, Hexin Bai, Shah Tanvir ur Rahman Chowdhury, Peng Chu, Anoj Aryal, Jie Yu, Haibin Ling, John P. Perdew, Qimin Yan

Abstract: In a data-driven paradigm, machine learning (ML) is the central component for developing accurate and universal exchange-correlation (XC) functionals in density functional theory (DFT). It is well known that XC functionals must satisfy several exact conditions and physical constraints, such as density scaling, spin scaling, and derivative discontinuity. In this work, we demonstrate that contrastiv… ▽ More In a data-driven paradigm, machine learning (ML) is the central component for developing accurate and universal exchange-correlation (XC) functionals in density functional theory (DFT). It is well known that XC functionals must satisfy several exact conditions and physical constraints, such as density scaling, spin scaling, and derivative discontinuity. In this work, we demonstrate that contrastive learning is a computationally efficient and flexible method to incorporate a physical constraint in ML-based density functional design. We propose a schematic approach to incorporate the uniform density scaling property of electron density for exchange energies by adopting contrastive representation learning during the pretraining task. The pretrained hidden representation is transferred to the downstream task to predict the exchange energies calculated by DFT. The electron density encoder transferred from the pretraining task based on contrastive learning predicts exchange energies that satisfy the scaling property, while the model trained without using contrastive learning gives poor predictions for the scaling-transformed electron density systems. Furthermore, the model with pretrained encoder gives a satisfactory performance with only small fractions of the whole augmented dataset labeled, comparable to the model trained from scratch using the whole dataset. The results demonstrate that incorporating exact constraints through contrastive learning can enhance the understanding of density-energy mapping using neural network (NN) models with less data labeling, which will be beneficial to generalizing the application of NN-based XC functionals in a wide range of scenarios that are not always available experimentally but theoretically justified. This work represents a viable pathway toward the machine learning design of a universal density functional via representation learning. △ Less

Submitted 30 May, 2022; originally announced May 2022.

Layer-by-Layer Epitaxy of Multilayer MoS2 Wafers

Authors: Qinqin Wang, Jian Tang, Xiaomei Li, Jinpeng Tian, Jing Liang, Na Li, Depeng Ji, Lede Xian, Yutuo Guo, Lu Li, Qinghua Zhang, Yanbang Chu, Zheng Wei, Yanchong Zhao, Luojun Du, Hua Yu Xuedong Bai, Lin Gu, Kaihui Liu, Wei Yang, Rong Yang, Dongxia Shi, Guangyu Zhang

Abstract: Two-dimensional (2D) semiconductor of MoS2 has great potential for advanced electronics technologies beyond silicon1-9. So far, high-quality monolayer MoS2 wafers10-12 are already available and various demonstrations from individual transistors to integrated circuits have also been shown13-15. In addition to the monolayer, multilayers have narrower band gaps but improved carrier mobilities and cur… ▽ More Two-dimensional (2D) semiconductor of MoS2 has great potential for advanced electronics technologies beyond silicon1-9. So far, high-quality monolayer MoS2 wafers10-12 are already available and various demonstrations from individual transistors to integrated circuits have also been shown13-15. In addition to the monolayer, multilayers have narrower band gaps but improved carrier mobilities and current capacities over the monolayer5,16-18. However, achieving high-quality multilayer MoS2 wafers remains a challenge. Here we report the growth of high quality multilayer MoS2 4-inch wafers via the layer-by-layer epitaxy process. The epitaxy leads to well-defined stacking orders between adjacent epitaxial layers and offers a delicate control of layer numbers up to 6. Systematic evaluations on the atomic structures and electronic properties were carried out for achieved wafers with different layer numbers. Significant improvements on device performances were found in thicker-layer field effect transistors (FETs), as expected. For example, the average field-effect mobility (μFE) at room temperature (RT) can increase from ~80 cm2V-1s-1 for monolayer to ~110/145 cm2V-1s-1 for bilayer/trilayer devices. The highest RT μFE=234.7 cm2V-1s-1 and a record-high on-current densities of 1.704 mAμm-1 at Vds=2 V were also achieved in trilayer MoS2 FETs with a high on/off ratio exceeding 107. Our work hence moves a step closer to practical applications of 2D MoS2 in electronics. △ Less

Submitted 17 March, 2022; originally announced March 2022.

Comments: 13 pages,4 Figures

Journal ref: Natl. Sci. Rev. 9, nwac077 (2022)

Exploration of Whether Skylight Polarization Patterns Contain Three-dimensional Attitude Information

Authors: Huaju Liang, Hongyang Bai, Tong Zhou

Abstract: Our previous work has demonstrated that Rayleigh model, which is widely used in polarized skylight navigation to describe skylight polarization patterns, does not contain three-dimensional (3D) attitude information [1]. However, it is still necessary to further explore whether the skylight polarization patterns contain 3D attitude information. So, in this paper, a social spider optimization (SSO)… ▽ More Our previous work has demonstrated that Rayleigh model, which is widely used in polarized skylight navigation to describe skylight polarization patterns, does not contain three-dimensional (3D) attitude information [1]. However, it is still necessary to further explore whether the skylight polarization patterns contain 3D attitude information. So, in this paper, a social spider optimization (SSO) method is proposed to estimate three Euler angles, which considers the difference of each pixel among polarization images based on template matching (TM) to make full use of the captured polarization information. In addition, to explore this problem, we not only use angle of polarization (AOP) and degree of polarization (DOP) information, but also the light intensity (LI) information. So, a sky model is established, which combines Berry model and Hosek model to fully describe AOP, DOP, and LI information in the sky, and considers the influence of four neutral points, ground albedo, atmospheric turbidity, and wavelength. The results of simulation show that the SSO algorithm can estimate 3D attitude and the established sky model contains 3D attitude information. However, when there are measurement noise or model error, the accuracy of 3D attitude estimation drops significantly. Especially in field experiment, it is very difficult to estimate 3D attitude. Finally, the results are discussed in detail. △ Less

Submitted 30 November, 2020; originally announced December 2020.

Polarized Skylight Navigation Simulation (PSNS) Dataset

Authors: Huaju Liang, Hongyang Bai

Abstract: With more and more machine learning methods applied to bioinspired polarized skylight navigation, the demand for polarized skylight navigation datasets is more and more urgent, which can be used to train and test machine learning methods. So, in this paper, an open polarized skylight navigation dataset is constructed for the first time. Firstly, a polarized sky model was proposed based on Sun posi… ▽ More With more and more machine learning methods applied to bioinspired polarized skylight navigation, the demand for polarized skylight navigation datasets is more and more urgent, which can be used to train and test machine learning methods. So, in this paper, an open polarized skylight navigation dataset is constructed for the first time. Firstly, a polarized sky model was proposed based on Sun position model, Berry sky model and Hosek sky model, which contains the information of the light intensity (LI), degree of polarization (DOP) and angle of polarization (AOP). Secondly, a polarization imaging simulation system is constructed, which can capture not only LI, DOP and AOP images, but also original black-and-white LI images in different polarization directions. Black-and-white LI images are the original data collected by actual polarization imager, so this system can completely describe the whole process of polarization imager capturing skylight polarization patterns. Above all, a polarized skylight navigation simulation (PSNS) dataset can be constructed. In addition, to facilitate researchers to build their own datasets based on their own polarized light sensors and sky models, we have disclosed the source code of polarization imager and original LI imager on GitHub. △ Less

Submitted 1 September, 2021; v1 submitted 26 July, 2020; originally announced July 2020.

Influence of sensor tilts on bio-inspired polarized skylight orientation determination

Authors: Huaju Liang, Hongyang Bai, Tong Zhou, Kai Shen

Abstract: Inspired by many insects, several polarized skylight orientation determination approaches have been proposed. However, almost all of these approaches always require polarization sensor pointing to the zenith of the sky dome. So, the influence of sensor tilts (not point to the sky zenith) on bio-inspired polarization orientation determination needs to be analyzed urgently. Aiming at this problem, a… ▽ More Inspired by many insects, several polarized skylight orientation determination approaches have been proposed. However, almost all of these approaches always require polarization sensor pointing to the zenith of the sky dome. So, the influence of sensor tilts (not point to the sky zenith) on bio-inspired polarization orientation determination needs to be analyzed urgently. Aiming at this problem, a polarization compass simulation system is designed based upon solar position model, Rayleigh sky model, and hypothetical polarization imager. Then, the error characteristics of four typical orientation determination approaches are investigated in detail under only pitch tilt condition, only roll tilt condition, pitch and roll tilts condition respectively. Finally, simulation and field experiments all show that the orientation errors of four typical approaches are highly consistent when they are subjected to tilt interference, in addition, the errors are affected by not only the degree of inclination, but also the solar altitude angle and the relative position between the Sun and polarization sensor. The results of this paper can be used to estimate the orientation determination error caused by sensor tilts and correct this kind of error. △ Less

Submitted 5 November, 2020; v1 submitted 17 July, 2020; originally announced July 2020.

Graph Neural Network for Hamiltonian-Based Material Property Prediction

Authors: Hexin Bai, Peng Chu, Jeng-Yuan Tsai, Nathan Wilson, Xiaofeng Qian, Qimin Yan, Haibin Ling

Abstract: Development of next-generation electronic devices for applications call for the discovery of quantum materials hosting novel electronic, magnetic, and topological properties. Traditional electronic structure methods require expensive computation time and memory consumption, thus a fast and accurate prediction model is desired with increasing importance. Representing the interactions among atomic o… ▽ More Development of next-generation electronic devices for applications call for the discovery of quantum materials hosting novel electronic, magnetic, and topological properties. Traditional electronic structure methods require expensive computation time and memory consumption, thus a fast and accurate prediction model is desired with increasing importance. Representing the interactions among atomic orbitals in any material, a material Hamiltonian provides all the essential elements that control the structure-property correlations in inorganic compounds. Effective learning of material Hamiltonian by developing machine learning methodologies therefore offers a transformative approach to accelerate the discovery and design of quantum materials. With this motivation, we present and compare several different graph convolution networks that are able to predict the band gap for inorganic materials. The models are developed to incorporate two different features: the information of each orbital itself and the interaction between each other. The information of each orbital includes the name, relative coordinates with respect to the center of super cell and the atom number, while the interaction between orbitals are represented by the Hamiltonian matrix. The results show that our model can get a promising prediction accuracy with cross-validation. △ Less

Submitted 27 May, 2020; originally announced May 2020.

ACM Class: J.2; I.5.1

Measurement of the neutron beam profile of the Back-n white neutron facility at CSNS with a Micromegas detector

Authors: Binbin Qi, Yang Li, Danyang Zhu, Zhiyong Zhang, Ruirui Fan, Jiang Pan, Jianxin Feng, Chengming Liu, Changqing Feng, Jianbei Liu, Ming Shao, Yi Zhou, Yanfeng Wang, Han Yi, Qi An, Huaiyong Bai, Jie Bao, Ping Cao, Qiping Chen, Yonghao Chen, Pinjing Cheng, Zengqi Cui, Minhao Gu, Fengqin Guo, Changcai Han , et al. (62 additional authors not shown)

Abstract: The Back-n white neutron beam line, which uses back-streaming white neutrons from the spallation target of the China Spallation Neutron Source, is used for nuclear data measurements. A Micromegas-based neutron detector with two variants was specially developed to measure the beam spot distribution for this beam line. In this article, the design, fabrication, and characterization of the detector ar… ▽ More The Back-n white neutron beam line, which uses back-streaming white neutrons from the spallation target of the China Spallation Neutron Source, is used for nuclear data measurements. A Micromegas-based neutron detector with two variants was specially developed to measure the beam spot distribution for this beam line. In this article, the design, fabrication, and characterization of the detector are described. The results of the detector performance tests are presented, which include the relative electron transparency, the gain and the gain uniformity, and the neutron beam profile reconstruction capability. The result of the first measurement of the Back-n neutron beam spot distribution is also presented. △ Less

Submitted 19 January, 2020; v1 submitted 6 August, 2019; originally announced August 2019.

Comments: 31 pages, 18 figures

Journal ref: Nuclear Inst. and Methods in Physics Research, A 957 (2020) 163407

On the Trajectory Dependence of Atmospheric Boundary Layer Turbulence Sensing using Small Unmanned Vehicles

Authors: Balaji Jayaraman, Sam Allison, He Bai

Abstract: Atmospheric turbulence, especially in the near-surface boundary layer is known to be under-sampled due to the need to capture a wide separation in length and time-scales and limitation in the number of sensors. Over the past decade, the use if Unmanned Aircraft Systems (UAS) technology is approaching ubiquitous proportions for a wide variety of applications, especially with the recent FAA relaxati… ▽ More Atmospheric turbulence, especially in the near-surface boundary layer is known to be under-sampled due to the need to capture a wide separation in length and time-scales and limitation in the number of sensors. Over the past decade, the use if Unmanned Aircraft Systems (UAS) technology is approaching ubiquitous proportions for a wide variety of applications, especially with the recent FAA relaxation of flying restrictions. From a geophysical sciences perspective, such technology would allow for sensing of large-scale atmospheric flows, particularly, atmospheric boundary layer (ABL) turbulence, air quality monitoring in urban settings where multitude of small, minimally-invasive and mobile sensors can drastically alter our ability to study such complex phenomena. Currently available observational data of atmospheric boundary layer physics is so sparse and infrequent which significantly limits analysis. With the quantity and resolution of the data that can be measured using a swarm of UAS, three-dimensional reconstruction and deduction of coherent structures in ABL turbulence may be feasible. However, key challenges remain in the form of identifying optimal trajectories to fly the UAS to obtain the relevant quantifications of the turbulence, interpretation of the sensor data from mobile sensors and understanding how representative are the sparse measurements of the overall turbulent boundary layer. This leads to many fundamentally interesting questions if which a few are explored in this article. △ Less

Submitted 11 July, 2018; originally announced July 2018.

Comments: Manuscript being prepared for Boundary Layer Meteorlogy

Electronics of Time-of-flight Measurement for Back-n at CSNS

Authors: T. Yu, P. Cao, X. Y. Ji, L. K. Xie, X. R. Huang, Q. An, H. Y. Bai, J. Bao, Y. H. Chen, P. J. Cheng, Z. Q. Cui, R. R. Fan, C. Q. Feng, M. H. Gu, Z. J. Han, G. Z. He, Y. C. He, Y. F. He, H. X. Huang, W. L. Huang, X. L. Ji, H. Y. Jiang, W. Jiang, H. Y. Jing, L. Kang , et al. (46 additional authors not shown)

Abstract: Back-n is a white neutron experimental facility at China Spallation Neutron Source (CSNS). The time structure of the primary proton beam make it fully applicable to use TOF (time-of-flight) method for neutron energy measuring. We implement the electronics of TOF measurement on the general-purpose readout electronics designed for all of the seven detectors in Back-n. The electronics is based on PXI… ▽ More Back-n is a white neutron experimental facility at China Spallation Neutron Source (CSNS). The time structure of the primary proton beam make it fully applicable to use TOF (time-of-flight) method for neutron energy measuring. We implement the electronics of TOF measurement on the general-purpose readout electronics designed for all of the seven detectors in Back-n. The electronics is based on PXIe (Peripheral Component Interconnect Express eXtensions for Instrumentation) platform, which is composed of FDM (Field Digitizer Modules), TCM (Trigger and Clock Module), and SCM (Signal Conditioning Module). T0 signal synchronous to the CSNS accelerator represents the neutron emission from the target. It is the start of time stamp. The trigger and clock module (TCM) receives, synchronizes and distributes the T0 signal to each FDM based on the PXIe backplane bus. Meantime, detector signals after being conditioned are fed into FDMs for waveform digitizing. First sample point of the signal is the stop of time stamp. According to the start, stop time stamp and the time of signal over threshold, the total TOF can be obtained. FPGA-based (Field Programmable Gate Array) TDC is implemented on TCM to accurately acquire the time interval between the asynchronous T0 signal and the global synchronous clock phase. There is also an FPGA-based TDC on FDM to accurately acquire the time interval between T0 arriving at FDM and the first sample point of the detector signal, the over threshold time of signal is obtained offline. This method for TOF measurement is efficient and not needed for additional modules. Test result shows the accuracy of TOF is sub-nanosecond and can meet the requirement for Back-n at CSNS. △ Less

Submitted 24 June, 2018; originally announced June 2018.

Comments: 4 pages, 13 figures, 21st IEEE Real Time Conference

T0 Fan-out for Back-n White Neutron Facility at CSNS

Authors: X. Y. Ji, P. Cao, T. Yu, L. K. Xie, X. R. Huang, Q. An, H. Y. Bai, J. Bao, Y. H. Chen, P. J. Cheng, Z. Q. Cui, R. R. Fan, C. Q. Feng, M. H. Gu, Z. J. Han, G. Z. He, Y. C. He, Y. F. He, H. X. Huang, W. L. Huang, X. L. Ji, H. Y. Jiang, W. Jiang, H. Y. Jing, L. Kang , et al. (46 additional authors not shown)

Abstract: the main physics goal for Back-n white neutron facility at China Spallation Neutron Source (CSNS) is to measure nuclear data. The energy of neutrons is one of the most important parameters for measuring nuclear data. Method of time of flight (TOF) is used to obtain the energy of neutrons. The time when proton bunches hit the thick tungsten target is considered as the start point of TOF. T0 signal,… ▽ More the main physics goal for Back-n white neutron facility at China Spallation Neutron Source (CSNS) is to measure nuclear data. The energy of neutrons is one of the most important parameters for measuring nuclear data. Method of time of flight (TOF) is used to obtain the energy of neutrons. The time when proton bunches hit the thick tungsten target is considered as the start point of TOF. T0 signal, generated from the CSNS accelerator, represents this start time. Besides, the T0 signal is also used as the gate control signal that triggers the readout electronics. Obviously, the timing precision of T0 directly affects the measurement precision of TOF and controls the running or readout electronics. In this paper, the T0 fan-out for Back-n white neutron facility at CSNS is proposed. The T0 signal travelling from the CSNS accelerator is fanned out to the two underground experiment stations respectively over long cables. To guarantee the timing precision, T0 signal is conditioned with good signal edge. Furthermore, techniques of signal pre-emphasizing and equalizing are used to improve signal quality after T0 being transmitted over long cables with about 100 m length. Experiments show that the T0 fan-out works well, the T0 signal transmitted over 100 m remains a good time resolution with a standard deviation of 25 ps. It absolutely meets the required accuracy of the measurement of TOF. △ Less

Submitted 24 June, 2018; originally announced June 2018.

Comments: 3 pages, 6 figures, the 21st IEEE Real Time Conference

Imaging superatomic molecular orbitals in a ${\bf C_{60}}$ molecule through four 800-nm photons

Authors: G. P. Zhang, H. P. Zhu, Y. H. Bai, J. Bonacum, X. S. Wu, Thomas F. George

Abstract: Superatomic molecular orbitals (SAMO) in C60 are ideal building blocks for functional nanostructures. However, imaging them spatially in the gas phase has been unsuccessful. It is found experimentally that if C60 is excited by an 800-nm laser, the photoelectron casts an anisotropic velocity image, but the image becomes isotropic if excited at a 400-nm wavelength. This diffuse image difference has… ▽ More Superatomic molecular orbitals (SAMO) in C60 are ideal building blocks for functional nanostructures. However, imaging them spatially in the gas phase has been unsuccessful. It is found experimentally that if C60 is excited by an 800-nm laser, the photoelectron casts an anisotropic velocity image, but the image becomes isotropic if excited at a 400-nm wavelength. This diffuse image difference has been attributed to electron thermal ionization, but more recent experiments (800 nm) reveal a clear non-diffuse image superimposed on the diffuse image, whose origin remains a mystery. Here we show that the non-diffuse anisotropic image is the precursor of the $f$ SAMO. We predict that four 800-nm photons can directly access the $1f$ SAMO, and with one more photon, can image the orbital, with the photoelectron angular distribution having two maxima at 0$^\circ$ and 180$^\circ$ and two humps separated by 56.5$^\circ$. Since two 400-nm photons only resonantly excite the spherical $1s$ SAMO and four 800-nm photon excite the anisotropic $1f$ SAMO, our finding gives a natural explanation of the non-diffuse image difference, complementing the thermal scenario. △ Less

Submitted 26 April, 2015; originally announced April 2015.

Comments: 14 pages, 3 figures. Accepted for publication in International Journal of Modern Physics B

Journal ref: International Journal of Modern Physics B (2015)