-
Performance Evaluation and Optimization of Air-to-Air Thermoelectric Heat Pump System
Authors:
Je-Hyeong Bahk,
Thiraj D. Mohankumar,
Abhishek Saini,
Sarah J. Watzman
Abstract:
Thermoelectric (TE) heat pumps are a promising solid-state technology for space cooling and heating owing to their unique advantages such as environmental friendliness with no harmful refrigerants, small form factors, low noise, robustness with no moving parts, and demand-flexible operation. However, their low coefficient of performance (COP) presents a challenge towards broader adaptation of the…
▽ More
Thermoelectric (TE) heat pumps are a promising solid-state technology for space cooling and heating owing to their unique advantages such as environmental friendliness with no harmful refrigerants, small form factors, low noise, robustness with no moving parts, and demand-flexible operation. However, their low coefficient of performance (COP) presents a challenge towards broader adaptation of the technology at the market level. Built on our previous theoretical framework for a modular system design aimed at improving both COP and cooling capacity, this study focuses on experimental characterization and optimization of a unit air-to-air TE heat pump system. We employ double-sided heating/cooling and counterflow configuration for uniform heat transfer with TE modules and heat exchangers. System-level evaluations validate the theoretical model and show the variation of air temperature change and system COP with different electric current inputs and air flowrates. A maximum cooling COP of 4.4 and a maximum heating COP of 6.0 were obtained at optimized current levels. Further analysis shows that parasitic thermal resistances in the system significantly reduced both COP and air temperature change by over 50%.
△ Less
Submitted 14 October, 2024;
originally announced October 2024.
-
Synergy Between Excluded Volume Effect with Co-embedded Microparticles and Chemical Doping in Carbon Nanotube Network-based Composites to Enhance Thermoelectric Power Factor
Authors:
Oluwasegun Isaac Akinboye,
Yu Zhang,
Vamsi Krishna Reddy Kondapalli,
Lars Alexander Olivan,
Nilesh Raut,
Mark Jackson,
Adekoya Oluwaseun,
Ryan White,
Vesselin Shanov,
Je-Hyeong Bahk
Abstract:
There is a growing momentum in recent thermoelectric materials research for flexible materials which enhance power output and efficiency at human wearable temperatures. In our previous work, we established the method to improve thermoelectric properties with co-embedding microparticles in carbon nanotube (CNT) network-based composites. In this work, we investigate the synergy of excluded volume ef…
▽ More
There is a growing momentum in recent thermoelectric materials research for flexible materials which enhance power output and efficiency at human wearable temperatures. In our previous work, we established the method to improve thermoelectric properties with co-embedding microparticles in carbon nanotube (CNT) network-based composites. In this work, we investigate the synergy of excluded volume effect by silica microparticles with CNT doping toward the enhancement of thermoelectric power factor. We find that the power factor can be enhanced to 28.46 μW/mK2 when the CNT is doped with 0.5 μg/ml of 1,5,7-triazabicyclo [4.4.0] dec-5-ene (TBD) before co-embedding silica microparticles within the carbon nanotube-based composite. We also fabricated and demonstrated flexible wearable thermoelectric devices made of the developed composites that exhibits a power output of 0.025 μW/cm2 at a temperature differential of only 4 K.
△ Less
Submitted 3 May, 2023;
originally announced May 2023.
-
Boosting Thermoelectric Power Factor of Carbon Nanotube Networks with Excluded Volume by Co-embedded Microparticles
Authors:
Oluwasegun Isaac Akinboye,
Yu Zhang,
Vamsi Krishna Reddy Kondapalli,
Fan Yang,
Vesselin Shanov,
Yue Wu,
Je-Hyeong Bahk
Abstract:
Carbon nanotube (CNTs) networks embedded in polymer matrix have been extensively studied over the recent years as a flexible thermoelectric (TE) transport medium. However, their power factor has been largely limited by the relatively inefficient tunneling transport at junctions between CNTs and the low density of conducting channels through the networks. In this work, we demonstrate that significa…
▽ More
Carbon nanotube (CNTs) networks embedded in polymer matrix have been extensively studied over the recent years as a flexible thermoelectric (TE) transport medium. However, their power factor has been largely limited by the relatively inefficient tunneling transport at junctions between CNTs and the low density of conducting channels through the networks. In this work, we demonstrate that significant enhancement of power factor is possible by adding electrically insulating microscale particles in CNT networks. When silica particles of a few micrometer diameters were co-embedded in single-walled CNT-polydimethylsiloxane (PDMS) composites, both the electrical conductivity and the Seebeck coefficient were simultaneously enhanced, thereby boosting the power factor by more than a factor of six. We find that the silica microparticles excluded a large volume of the composite from the access of CNTs and caused CNT networks to form around them using the polymer as a binder, which in turn resulted in improved connectivity and alignment of CNTs. Our theoretical calculations based on junction tunneling transport show that the large power factor enhancement can be attributed to the enhanced tunneling with reduced junction distance between CNTs and the increased geometric factor due to better CNT alignment. Additional enhancement of power factor by more than a factor of two was achieved by sample compression due to the further improvement of CNT alignment.
△ Less
Submitted 21 November, 2022; v1 submitted 18 September, 2022;
originally announced September 2022.
-
Cost-Performance Trade-off in Thermoelectric Air Conditioning System with Graded and Constant Material Properties
Authors:
Abhishek Saini,
Sarah J. Watzman,
Je-Hyeong Bahk
Abstract:
Thermoelectric (TE) air cooling is a solid-state technology that has the potential to replace conventional vapor compression-based air conditioning. In this paper, we present a detailed system-level modeling for thermoelectric air conditioning system with position-dependent (graded) and constant material properties. Strategies for design optimization of the system are provided in terms of cost-per…
▽ More
Thermoelectric (TE) air cooling is a solid-state technology that has the potential to replace conventional vapor compression-based air conditioning. In this paper, we present a detailed system-level modeling for thermoelectric air conditioning system with position-dependent (graded) and constant material properties. Strategies for design optimization of the system are provided in terms of cost-performance trade-off. Realistic convection heat transfer at both sides of the system are taken into account in our modeling. Effects of convection heat transfer coefficients, air flowrate, and thermoelectric material properties are investigated with varying key parameters such as TE leg thickness, module fill factor, and input current. Both constant material properties and graded properties are considered for the TE materials, and they are compared in terms of the degree of cooling, coefficient of performance (COP), and power consumption. For graded materials, we employ one-dimensional finite element methods to solve the coupled electrical and thermal current equations with arbitrary profile of material properties varying with position along the TE legs. We find that graded materials can enhance the degree of cooling, but only at the expense of COP, compared to the case of constant property materials. With constant material properties of ZT = 1 and relatively low electric current, the power consumption of TE cooler can be lower than those of conventional air conditioners at an equivalent cooling capacity. Considering additional advantages such as demand-flexible operation, low noise, and high scalability, thermoelectric cooling could be a competitive technology for future air conditioning applications.
△ Less
Submitted 4 November, 2020;
originally announced November 2020.
-
Long-range prisoner's dilemma game on a cycle
Authors:
Jiwon Bahk,
Seung Ki Baek,
Hyeong-Chai Jeong
Abstract:
We investigate evolutionary dynamics of altruism with long-range interaction on a cycle. The interaction between individuals is described by a simplified version of the prisoner's dilemma (PD) game in which the payoffs are parameterized by $c$, the cost of a cooperative action. In our model, the probabilities of the game interaction and competition decay algebraically with $r_{AB}$, the distance b…
▽ More
We investigate evolutionary dynamics of altruism with long-range interaction on a cycle. The interaction between individuals is described by a simplified version of the prisoner's dilemma (PD) game in which the payoffs are parameterized by $c$, the cost of a cooperative action. In our model, the probabilities of the game interaction and competition decay algebraically with $r_{AB}$, the distance between two players $A$ and $B$, but with different exponents: That is, the probability to play the PD game is proportional to $r_{AB}^{-α}$. If player $A$ is chosen for death, on the other hand, the probability for $B$ to occupy the empty site is proportional to $r_{AB}^{-β}$. In a limiting case of $β\to\infty$, where the competition for an empty site occurs between its nearest neighbors only, we analytically find the condition for the proliferation of altruism in terms of $c_{th}$, a threshold of $c$ below which altruism prevails. For finite $β$, we conjecture a formula for $c_{th}$ as a function of $α$ and $β$. We also propose a numerical method to locate $c_{th}$, according to which we observe excellent agreement with the conjecture even when the selection strength is of considerable magnitude.
△ Less
Submitted 27 December, 2018;
originally announced December 2018.
