-
Purcell-enhanced emissions from diamond color centers in slow light photonic crystal waveguides
Authors:
Sophie W. Ding,
Chang Jin,
Kazuhiro Kuruma,
Xinghan Guo,
Michael Haas,
Boris Korzh,
Andrew Beyer,
Matt Shaw,
Neil Sinclair,
David D. Awschalom,
F. Joseph Heremans,
Nazar Delegan,
Alexander A. High,
Marko Loncar
Abstract:
Quantum memories based on emitters with optically addressable spins rely on efficient photonic interfaces, often implemented as nanophotonic cavities with ideally narrow spectral linewidths and small mode volumes. However, these approaches require nearly perfect spectral and spatial overlap between the cavity mode and quantum emitter, which can be challenging. This is especially true in the case o…
▽ More
Quantum memories based on emitters with optically addressable spins rely on efficient photonic interfaces, often implemented as nanophotonic cavities with ideally narrow spectral linewidths and small mode volumes. However, these approaches require nearly perfect spectral and spatial overlap between the cavity mode and quantum emitter, which can be challenging. This is especially true in the case of solid-state quantum emitters that are often randomly positioned and can suffer from significant inhomogeneous broadening. An alternative approach to mitigate these challenges is to use slow-light waveguides that can enhance light-matter interaction across large optical bandwidths and large areas. Here, we demonstrate diamond slow light photonic crystal (PhC) waveguides that enable broadband optical coupling to embedded silicon-vacancy (SiV) color centers. We take advantage of the recently demonstrated thin-film diamond photonic platform to fabricate fully suspended two-dimensional PhC waveguides. Using this approach, we demonstrate waveguide modes with high group indices up to 70 and observe Purcell-enhanced emissions of the SiVs coupled to the waveguide mode. Our approach represents a practical diamond platform for robust spin-photon interfaces with color centers.
△ Less
Submitted 2 March, 2025;
originally announced March 2025.
-
A fluorescent-protein spin qubit
Authors:
Jacob S. Feder,
Benjamin S. Soloway,
Shreya Verma,
Zhi Z. Geng,
Shihao Wang,
Bethel Kifle,
Emmeline G. Riendeau,
Yeghishe Tsaturyan,
Leah R. Weiss,
Mouzhe Xie,
Jun Huang,
Aaron Esser-Kahn,
Laura Gagliardi,
David D. Awschalom,
Peter C. Maurer
Abstract:
Optically-addressable spin qubits form the foundation of a new generation of emerging nanoscale sensors. The engineering of these sensors has mainly focused on solid-state systems such as the nitrogen-vacancy (NV) center in diamond. However, NVs are restricted in their ability to interface with biomolecules due to their bulky diamond host. Meanwhile, fluorescent proteins have become the gold stand…
▽ More
Optically-addressable spin qubits form the foundation of a new generation of emerging nanoscale sensors. The engineering of these sensors has mainly focused on solid-state systems such as the nitrogen-vacancy (NV) center in diamond. However, NVs are restricted in their ability to interface with biomolecules due to their bulky diamond host. Meanwhile, fluorescent proteins have become the gold standard in bioimaging, as they are genetically encodable and easily integrated with biomolecules. While fluorescent proteins have been suggested to possess a metastable triplet state, they have not been investigated as qubit sensors. Here, we realize an optically-addressable spin qubit in the Enhanced Yellow Fluorescent Protein (EYFP) enabled by a novel spin-readout technique. A near-infrared laser pulse allows for triggered readout of the triplet state with up to 44% spin contrast. Using coherent microwave control of the EYFP spin at liquid-nitrogen temperatures, we measure a spin-lattice relaxation time of $(141 \pm 5)\, \mathrm{μs}$, a $(16 \pm 2)\, \mathrm{μs}$ coherence time under Carr-Purcell-Meiboom-Gill (CPMG) decoupling, and a predicted oscillating (AC) magnetic field sensitivity with an upper bound of $183 \, \mathrm{fT}\, \mathrm{mol}^{1/2}\, \mathrm{Hz}^{-1/2}$. We express the qubit in mammalian cells, maintaining contrast and coherent control despite the complex intracellular environment. Finally, we demonstrate optically-detected magnetic resonance at room temperature in aqueous solution with contrast up to 3%, and measure a static (DC) field sensitivity with an upper bound of $93 \, \mathrm{pT}\, \mathrm{mol}^{1/2}\, \mathrm{Hz}^{-1/2}$. Our results establish fluorescent proteins as a powerful new qubit sensor platform and pave the way for applications in the life sciences that are out of reach for solid-state technologies.
△ Less
Submitted 24 January, 2025; v1 submitted 25 November, 2024;
originally announced November 2024.
-
Controlled Spalling of Single Crystal 4H-SiC Bulk Substrates
Authors:
Connor P Horn,
Christina Wicker,
Antoni Wellisz,
Cyrus Zeledon,
Pavani Vamsi Krishna Nittala,
F Joseph Heremans,
David D Awschalom,
Supratik Guha
Abstract:
We detail several scientific and engineering innovations which enable the controlled spalling of 10 - 50 micron thick films of single crystal 4H silicon carbide (4H-SiC) from bulk substrates. 4H-SiC's properties, including high thermal conductivity and a wide bandgap, make it an ideal candidate for high-temperature, high-voltage power electronic devices. Moreover, 4H-SiC has been shown to be an ex…
▽ More
We detail several scientific and engineering innovations which enable the controlled spalling of 10 - 50 micron thick films of single crystal 4H silicon carbide (4H-SiC) from bulk substrates. 4H-SiC's properties, including high thermal conductivity and a wide bandgap, make it an ideal candidate for high-temperature, high-voltage power electronic devices. Moreover, 4H-SiC has been shown to be an excellent host of solid-state atomic defect qubits for quantum computing and quantum networking. Because 4H-SiC single crystal substrates are expensive (due to long growth times and limited yield), techniques for removal and transfer of bulk-quality films in the tens-of-microns thickness range are highly desirable to allow for substrate reuse and integration of the separated films. In this work we utilize novel approaches for stressor layer thickness control and spalling crack initiation to demonstrate controlled spalling of 4H-SiC, the highest fracture toughness material spalled to date. Additionally, we demonstrate substrate re-use, bonding of the spalled films to carrier substrates, and explore the spin coherence of the spalled films. In preliminary studies we are able to achieve coherent spin control of neutral divacancy ($VV^{0}$) qubit ensembles and measure a quasi-bulk spin $T_{2}$ of 79.7 $μ$s in such spalled films.
△ Less
Submitted 30 June, 2024; v1 submitted 30 April, 2024;
originally announced April 2024.
-
High-Q Cavity Interface for Color Centers in Thin Film Diamond
Authors:
Sophie W. Ding,
Michael Haas,
Xinghan Guo,
Kazuhiro Kuruma,
Chang Jin,
Zixi Li,
David D. Awschalom,
Nazar Delegan,
F. Joseph Heremans,
Alex High,
Marko Loncar
Abstract:
Quantum information technology offers the potential to realize unprecedented computational resources via secure channels capable of distributing entanglement between quantum computers. Diamond, as a host to atom-like defects with optically-accessible spin qubits, is a leading platform to realize quantum memory nodes needed to extend the reach of quantum links. Photonic crystal (PhC) cavities enhan…
▽ More
Quantum information technology offers the potential to realize unprecedented computational resources via secure channels capable of distributing entanglement between quantum computers. Diamond, as a host to atom-like defects with optically-accessible spin qubits, is a leading platform to realize quantum memory nodes needed to extend the reach of quantum links. Photonic crystal (PhC) cavities enhance light-matter interaction and are essential ingredients of an efficient interface between spins and photons that are used to store and communicate quantum information respectively. Despite great effort, however, the realization of visible PhC cavities with high quality factor (Q) and design flexibility is challenging in diamond. Here, we demonstrate one- and two-dimensional PhC cavities fabricated in recently developed thin-film diamonds, featuring Q-factors of 1.8x10$^5$ and 1.6x10$^5$, respectively, the highest Qs for visible PhC cavities realized in any material. Importantly, our fabrication process is simple and high-yield, based on conventional planar fabrication techniques, in contrast to previous approaches that rely on complex undercut methods. We also demonstrate fiber-coupled 1D PhC cavities with high photon extraction efficiency, and optical coupling between a single SiV center and such a cavity at 4K achieving a Purcell factor of 13. The demonstrated diamond thin-film photonic platform will improve the performance and scalability of quantum nodes and expand the range of quantum technologies.
△ Less
Submitted 8 February, 2024;
originally announced February 2024.
-
Optical and spin coherence of Er$^{3+}$ in epitaxial CeO$_2$ on silicon
Authors:
Jiefei Zhang,
Gregory D. Grant,
Ignas Masiulionis,
Michael T. Solomon,
Jasleen K. Bindra,
Jens Niklas,
Alan M. Dibos,
Oleg G. Poluektov,
F. Joseph Heremans,
Supratik Guha,
David D. Awschalom
Abstract:
Solid-state atomic defects with optical transitions in the telecommunication bands, potentially in a nuclear spin free environment, are important for applications in fiber-based quantum networks. Erbium ions doped in CeO$_2$ offer such a desired combination. Here we report on the optical homogeneous linewidth and electron spin coherence of Er$^{3+}$ ions doped in CeO$_2$ epitaxial film grown on a…
▽ More
Solid-state atomic defects with optical transitions in the telecommunication bands, potentially in a nuclear spin free environment, are important for applications in fiber-based quantum networks. Erbium ions doped in CeO$_2$ offer such a desired combination. Here we report on the optical homogeneous linewidth and electron spin coherence of Er$^{3+}$ ions doped in CeO$_2$ epitaxial film grown on a Si(111) substrate. The long-lived optical transition near 1530 nm in the environmentally-protected 4f shell of Er$^{3+}$ shows a narrow homogeneous linewidth of 440 kHz with an optical coherence time of 0.72 $μ$s at 3.6 K. The reduced nuclear spin noise in the host allows for Er$^{3+}$ electron spin polarization at 3.6 K, yielding an electron spin coherence of 0.66 $μ$s (in the isolated ion limit) and a spin relaxation of 2.5 ms. These findings indicate the potential of Er$^{3+}$:CeO$_2$ film as a valuable platform for quantum networks and communication applications.
△ Less
Submitted 28 September, 2023;
originally announced September 2023.
-
Nanocavity-mediated Purcell enhancement of Er in TiO$_2$ thin films grown via atomic layer deposition
Authors:
Cheng Ji,
Michael T. Solomon,
Gregory D. Grant,
Koichi Tanaka,
Muchuan Hua,
Jianguo Wen,
Sagar K. Seth,
Connor P. Horn,
Ignas Masiulionis,
Manish K. Singh,
Sean E. Sullivan,
F. Joseph Heremans,
David D. Awschalom,
Supratik Guha,
Alan M. Dibos
Abstract:
The use of trivalent erbium (Er$^{3+}$), typically embedded as an atomic defect in the solid-state, has widespread adoption as a dopant in telecommunications devices and shows promise as a spin-based quantum memory for quantum communication. In particular, its natural telecom C-band optical transition and spin-photon interface makes it an ideal candidate for integration into existing optical fiber…
▽ More
The use of trivalent erbium (Er$^{3+}$), typically embedded as an atomic defect in the solid-state, has widespread adoption as a dopant in telecommunications devices and shows promise as a spin-based quantum memory for quantum communication. In particular, its natural telecom C-band optical transition and spin-photon interface makes it an ideal candidate for integration into existing optical fiber networks without the need for quantum frequency conversion. However, successful scaling requires a host material with few intrinsic nuclear spins, compatibility with semiconductor foundry processes, and straightforward integration with silicon photonics. Here, we present Er-doped titanium dioxide (TiO$_2$) thin film growth on silicon substrates using a foundry-scalable atomic layer deposition process with a wide range of doping control over the Er concentration. Even though the as-grown films are amorphous, after oxygen annealing they exhibit relatively large crystalline grains, and the embedded Er ions exhibit the characteristic optical emission spectrum from anatase TiO$_2$. Critically, this growth and annealing process maintains the low surface roughness required for nanophotonic integration. Finally, we interface Er ensembles with high quality factor Si nanophotonic cavities via evanescent coupling and demonstrate a large Purcell enhancement (300) of their optical lifetime. Our findings demonstrate a low-temperature, non-destructive, and substrate-independent process for integrating Er-doped materials with silicon photonics. At high doping densities this platform can enable integrated photonic components such as on-chip amplifiers and lasers, while dilute concentrations can realize single ion quantum memories.
△ Less
Submitted 23 September, 2023;
originally announced September 2023.
-
Direct-bonded diamond membranes for heterogeneous quantum and electronic technologies
Authors:
Xinghan Guo,
Mouzhe Xie,
Anchita Addhya,
Avery Linder,
Uri Zvi,
Stella Wang,
Xiaofei Yu,
Tanvi D. Deshmukh,
Yuzi Liu,
Ian N. Hammock,
Zixi Li,
Clayton T. DeVault,
Amy Butcher,
Aaron P. Esser-Kahn,
David D. Awschalom,
Nazar Delegan,
Peter C. Maurer,
F. Joseph Heremans,
Alexander A. High
Abstract:
Diamond has superlative material properties for a broad range of quantum and electronic technologies. However, heteroepitaxial growth of single crystal diamond remains limited, impeding integration and evolution of diamond-based technologies. Here, we directly bond single-crystal diamond membranes to a wide variety of materials including silicon, fused silica, sapphire, thermal oxide, and lithium…
▽ More
Diamond has superlative material properties for a broad range of quantum and electronic technologies. However, heteroepitaxial growth of single crystal diamond remains limited, impeding integration and evolution of diamond-based technologies. Here, we directly bond single-crystal diamond membranes to a wide variety of materials including silicon, fused silica, sapphire, thermal oxide, and lithium niobate. Our bonding process combines customized membrane synthesis, transfer, and dry surface functionalization, allowing for minimal contamination while providing pathways for near unity yield and scalability. We generate bonded crystalline membranes with thickness as low as 10 nm, sub-nm interfacial regions, and nanometer-scale thickness variability over 200 by 200 $μm^2$ areas. We measure spin coherence times $T_2$ for nitrogen-vacancy centers in bonded membranes of up to 623(21) $μ$s, suitable for advanced quantum applications. We demonstrate multiple methods for integrating high quality factor nanophotonic cavities with the diamond heterostructures, highlighting the platform versatility in quantum photonic applications. Furthermore, we show that our ultra-thin diamond membranes are compatible with total internal reflection fluorescence (TIRF) microscopy, which enables interfacing coherent diamond quantum sensors with living cells while rejecting unwanted background luminescence. The processes demonstrated herein provide a full toolkit to synthesize heterogeneous diamond-based hybrid systems for quantum and electronic technologies.
△ Less
Submitted 20 June, 2024; v1 submitted 7 June, 2023;
originally announced June 2023.
-
Development of a Scalable Quantum Memory Platform -- Materials Science of Erbium-Doped TiO$_2$ Thin Films on Silicon
Authors:
Manish Kumar Singh,
Gary Wolfowicz,
Jianguo Wen,
Sean E. Sullivan,
Abhinav Prakash,
Alan M. Dibos,
David D. Awschalom,
F. Joseph Heremans,
Supratik Guha
Abstract:
Rare-earth ions (REI) have emerged as an attractive candidate for solid-state qubits, particularly as a quantum memory. Their 4f-4f transitions are shielded by filled 5s and 5p orbitals, offering a degree of protection from external electric fields. Embedded within a thin film oxide host, REIs could enable a qubit platform with significant memory capabilities. Furthermore, a silicon-compatible thi…
▽ More
Rare-earth ions (REI) have emerged as an attractive candidate for solid-state qubits, particularly as a quantum memory. Their 4f-4f transitions are shielded by filled 5s and 5p orbitals, offering a degree of protection from external electric fields. Embedded within a thin film oxide host, REIs could enable a qubit platform with significant memory capabilities. Furthermore, a silicon-compatible thin film form factor would enable the use of standard semiconductor fabrication processes to achieve chip-based integrability and scalability for functional quantum networks. Towards this goal, we have carried out optical and microstructural studies of erbium-doped polycrystalline and epitaxial TiO$_2$ thin films on Si (100), r-sapphire, and SrTiO$_3$ (100). We observe that the inhomogeneous optical linewidth of the Er photoluminescence is comparable or better for polycrystalline Er:TiO$_2$(grown on Si) in comparison to single crystal epitaxial films on sapphire or SrTiO$_3$, implying a relative insensitivity to extended defects. We investigated the effect of the film/substrate and film/air interface and found that the inhomogeneous linewidth and spectral diffusion can be significantly improved via bottom buffer and top capping layers of undoped TiO$_2$. Using such approaches, we obtain inhomogeneous linewidths of 5.2 GHz and spectral diffusion of 180 MHz in Er:TiO$_2$ /Si(100) films and have demonstrated the engineerability of quantum-relevant properties in these thin films.
△ Less
Submitted 27 February, 2022; v1 submitted 10 February, 2022;
originally announced February 2022.
-
Five-second coherence of a single spin with single-shot readout in silicon carbide
Authors:
Christopher P. Anderson,
Elena O. Glen,
Cyrus Zeledon,
Alexandre Bourassa,
Yu Jin,
Yizhi Zhu,
Christian Vorwerk,
Alexander L. Crook,
Hiroshi Abe,
Jawad Ul-Hassan,
Takeshi Ohshima,
Nguyen T. Son,
Giulia Galli,
David D. Awschalom
Abstract:
An outstanding hurdle for defect spin qubits in silicon carbide (SiC) is single-shot readout - a deterministic measurement of the quantum state. Here, we demonstrate single-shot readout of single defects in SiC via spin-to-charge conversion, whereby the defect's spin state is mapped onto a long-lived charge state. With this technique, we achieve over 80% readout fidelity without pre- or post-selec…
▽ More
An outstanding hurdle for defect spin qubits in silicon carbide (SiC) is single-shot readout - a deterministic measurement of the quantum state. Here, we demonstrate single-shot readout of single defects in SiC via spin-to-charge conversion, whereby the defect's spin state is mapped onto a long-lived charge state. With this technique, we achieve over 80% readout fidelity without pre- or post-selection, resulting in a high signal-to-noise ratio (SNR) that enables us to measure long spin coherence times. Combined with pulsed dynamical decoupling sequences in an isotopically purified host material, we report single spin T2 > 5s, over two orders of magnitude greater than previously reported in this system. The mapping of these coherent spin states onto single charges unlocks both single-shot readout for scalable quantum nodes and opportunities for electrical readout via integration with semiconductor devices.
△ Less
Submitted 5 October, 2021; v1 submitted 4 October, 2021;
originally announced October 2021.
-
Tunable and Transferable Diamond Membranes for Integrated Quantum Technologies
Authors:
Xinghan Guo,
Nazar Delegan,
Jonathan C. Karsch,
Zixi Li,
Tianle Liu,
Robert Shreiner,
Amy Butcher,
David D. Awschalom,
F. Joseph Heremans,
Alexander A. High
Abstract:
Color centers in diamond are widely explored as qubits in quantum technologies. However, challenges remain in the effective and efficient integration of these diamond-hosted qubits in device heterostructures. Here, nanoscale-thick uniform diamond membranes are synthesized via "smart-cut" and isotopically (12C) purified overgrowth. These membranes have tunable thicknesses (demonstrated 50 nm to 250…
▽ More
Color centers in diamond are widely explored as qubits in quantum technologies. However, challenges remain in the effective and efficient integration of these diamond-hosted qubits in device heterostructures. Here, nanoscale-thick uniform diamond membranes are synthesized via "smart-cut" and isotopically (12C) purified overgrowth. These membranes have tunable thicknesses (demonstrated 50 nm to 250 nm), are deterministically transferable, have bilaterally atomically flat surfaces (Rq <= 0.3 nm), and bulk-diamond-like crystallinity. Color centers are synthesized via both implantation and in-situ overgrowth incorporation. Within 110 nm thick membranes, individual germanium-vacancy (GeV-) centers exhibit stable photoluminescence at 5.4 K and average optical transition linewidths as low as 125 MHz. The room temperature spin coherence of individual nitrogen-vacancy (NV-) centers shows Ramsey spin dephasing times (T2*) and Hahn echo times (T2) as long as 150 us and 400 us, respectively. This platform enables the straightforward integration of diamond membranes that host coherent color centers into quantum technologies.
△ Less
Submitted 23 September, 2021;
originally announced September 2021.
-
Parasitic erbium photoluminescence in commercial telecom fiber optical components
Authors:
Gary Wolfowicz,
F. Joseph Heremans,
David D. Awschalom
Abstract:
Noiseless optical components are critical for applications ranging from metrology to quantum communication. Here we characterize several commercial telecom C-band fiber components for parasitic noise using a tunable laser. We observe the spectral signature of trace concentrations of erbium in all devices from the underlying optical crystals including YVO4, LiNbO3, TeO2 and AMTIR glass. Due to the…
▽ More
Noiseless optical components are critical for applications ranging from metrology to quantum communication. Here we characterize several commercial telecom C-band fiber components for parasitic noise using a tunable laser. We observe the spectral signature of trace concentrations of erbium in all devices from the underlying optical crystals including YVO4, LiNbO3, TeO2 and AMTIR glass. Due to the long erbium lifetime, these signals are challenging to mitigate at the single photon level in the telecom range, and suggests the need for higher purity optical crystals.
△ Less
Submitted 13 August, 2021;
originally announced August 2021.
-
Achieving a quantum smart workforce
Authors:
Clarice D. Aiello,
D. D. Awschalom,
Hannes Bernien,
Tina Brower-Thomas,
Kenneth R. Brown,
Todd A. Brun,
Justin R. Caram,
Eric Chitambar,
Rosa Di Felice,
Michael F. J. Fox,
Stephan Haas,
Alexander W. Holleitner,
Eric R. Hudson,
Jeffrey H. Hunt,
Robert Joynt,
Scott Koziol,
H. J. Lewandowski,
Douglas T. McClure,
Jens Palsberg,
Gina Passante,
Kristen L. Pudenz,
Christopher J. K. Richardson,
Jessica L. Rosenberg,
R. S. Ross,
Mark Saffman
, et al. (7 additional authors not shown)
Abstract:
Interest in building dedicated Quantum Information Science and Engineering (QISE) education programs has greatly expanded in recent years. These programs are inherently convergent, complex, often resource intensive and likely require collaboration with a broad variety of stakeholders. In order to address this combination of challenges, we have captured ideas from many members in the community. Thi…
▽ More
Interest in building dedicated Quantum Information Science and Engineering (QISE) education programs has greatly expanded in recent years. These programs are inherently convergent, complex, often resource intensive and likely require collaboration with a broad variety of stakeholders. In order to address this combination of challenges, we have captured ideas from many members in the community. This manuscript not only addresses policy makers and funding agencies (both public and private and from the regional to the international level) but also contains needs identified by industry leaders and discusses the difficulties inherent in creating an inclusive QISE curriculum. We report on the status of eighteen post-secondary education programs in QISE and provide guidance for building new programs. Lastly, we encourage the development of a comprehensive strategic plan for quantum education and workforce development as a means to make the most of the ongoing substantial investments being made in QISE.
△ Less
Submitted 23 October, 2020;
originally announced October 2020.
-
Entanglement and control of single quantum memories in isotopically engineered silicon carbide
Authors:
Alexandre Bourassa,
Christopher P. Anderson,
Kevin C. Miao,
Mykyta Onizhuk,
He Ma,
Alexander L. Crook,
Hiroshi Abe,
Jawad Ul-Hassan,
Takeshi Ohshima,
Nguyen T. Son,
Giulia Galli,
David D. Awschalom
Abstract:
Nuclear spins in the solid state are both a cause of decoherence and a valuable resource for spin qubits. In this work, we demonstrate control of isolated 29Si nuclear spins in silicon carbide (SiC) to create an entangled state between an optically active divacancy spin and a strongly coupled nuclear register. We then show how isotopic engineering of SiC unlocks control of single weakly coupled nu…
▽ More
Nuclear spins in the solid state are both a cause of decoherence and a valuable resource for spin qubits. In this work, we demonstrate control of isolated 29Si nuclear spins in silicon carbide (SiC) to create an entangled state between an optically active divacancy spin and a strongly coupled nuclear register. We then show how isotopic engineering of SiC unlocks control of single weakly coupled nuclear spins and present an ab initio method to predict the optimal isotopic fraction which maximizes the number of usable nuclear memories. We bolster these results by reporting high-fidelity electron spin control (F=99.984(1)%), alongside extended coherence times (T2=2.3 ms, T2DD>14.5 ms), and a >40 fold increase in dephasing time (T2*) from isotopic purification. Overall, this work underlines the importance of controlling the nuclear environment in solid-state systems and provides milestone demonstrations that link single photon emitters with nuclear memories in an industrially scalable material.
△ Less
Submitted 15 May, 2020;
originally announced May 2020.
-
High-Q Nanophotonic Resonators on Diamond Membranes using Templated Atomic Layer Deposition of TiO2
Authors:
Amy Butcher,
Xinghan Guo,
Robert Shreiner,
Nazar Delegan,
Kai Hao,
Peter J. Duda III,
David D. Awschalom,
F. Joseph Heremans,
Alexander A. High
Abstract:
Integrating solid-state quantum emitters with nanophotonic resonators is essential for efficient spin-photon interfacing and optical networking applications. While diamond color centers have proven to be excellent candidates for emerging quantum technologies, their integration with optical resonators remains challenging. Conventional approaches based on etching resonators into diamond often negati…
▽ More
Integrating solid-state quantum emitters with nanophotonic resonators is essential for efficient spin-photon interfacing and optical networking applications. While diamond color centers have proven to be excellent candidates for emerging quantum technologies, their integration with optical resonators remains challenging. Conventional approaches based on etching resonators into diamond often negatively impact color center performance and offer low device yield. Here, we developed an integrated photonics platform based on templated atomic layer deposition of TiO2 on diamond membranes. Our fabrication method yields high-performance nanophotonic devices while avoiding etching wavelength-scale features into diamond. Moreover, this technique generates highly reproducible optical resonances and can be iterated on individual diamond samples, a unique processing advantage. Our approach is suitable for a broad range of both wavelengths and substrates and can enable high-cooperativity interfacing between cavity photons and coherent defects in diamond or silicon carbide, rare earth ions, or other material systems.
△ Less
Submitted 30 May, 2020; v1 submitted 7 April, 2020;
originally announced April 2020.
-
SiC Cantilevers For Generating Uniaxial Stress
Authors:
Boyang Jiang,
Noah Opondo,
Gary Wolfowicz,
Pen-Li Yu,
David D. Awschalom,
Sunil A. Bhave
Abstract:
This paper demonstrates the first beam resonators fabricated from bulk high purity semi-insulating 4H Silicon Carbide wafers (HPSI 4H-SiC). Our innovations include: (1) Multi-level front-side, back-side inductively coupled plasma-deep reactive ion etching (ICP-DRIE) technology to fabricate thin, low-mass, bending-mode resonators framed by the SiC substrate (2) Laser Doppler Vibrometer (LDV) measur…
▽ More
This paper demonstrates the first beam resonators fabricated from bulk high purity semi-insulating 4H Silicon Carbide wafers (HPSI 4H-SiC). Our innovations include: (1) Multi-level front-side, back-side inductively coupled plasma-deep reactive ion etching (ICP-DRIE) technology to fabricate thin, low-mass, bending-mode resonators framed by the SiC substrate (2) Laser Doppler Vibrometer (LDV) measurements of mechanical quality factors (Q) > 10,000 with frequencies ranging from 300 kHz to 8MHz and (3) Calculated uniaxial in-plane surface stress 20 MPa at top surface of resonator base when operating at resonance in vacuum.
△ Less
Submitted 19 November, 2019;
originally announced November 2019.
-
General approaches for shear-correcting coordinate transformations in Bragg coherent diffraction imaging: Part 1
Authors:
Siddharth Maddali,
Peng Li,
Anastasios Pateras,
Daniel Timbie,
Nazar Delegan,
Alex Crook,
Hope Lee,
Irene Calvo-Almazan,
Dina Sheyfer,
Wonsuk Cha,
F. Joseph Heremans,
David D. Awschalom,
Virginie Chamard,
Marc Allain,
Stephan O. Hruszkewycz
Abstract:
In this two-part article series we provide a generalized description of the scattering geometry of Bragg coherent diffraction imaging (BCDI) experiments, the shear distortion effects inherent to the resulting three-dimensional (3D) image from current phase retrieval methods and strategies to mitigate this distortion. In this Part I, we derive in general terms the real-space coordinate transformati…
▽ More
In this two-part article series we provide a generalized description of the scattering geometry of Bragg coherent diffraction imaging (BCDI) experiments, the shear distortion effects inherent to the resulting three-dimensional (3D) image from current phase retrieval methods and strategies to mitigate this distortion. In this Part I, we derive in general terms the real-space coordinate transformation to correct this shear, which originates in the more fundamental relationship between the representations of mutually conjugate 3D spaces. Such a transformation, applied as a final post-processing step following phase retrieval, is crucial for arriving at an un-distorted and physically meaningful image of the 3D scatterer. As the relevance of BCDI grows in the field of materials characterization, we take this opportunity to generalize the available sparse literature that addresses the geometric theory of BCDI and the subsequent analysis methods. This aspect, specific to coherent Bragg diffraction and absent in two-dimensional transmission CDI experiments, gains particular importance concerning spatially-resolved characterization of 3D crystalline materials in a realiable, non-destructive manner. These articles describe this theory, from the diffraction in Bragg geometry, to the corrections needed to obtain a properly rendered digital image of the 3D scatterer. Part I provides the experimental BCDI communitcy with the theoretical underpinnings of the 3D real-space distortions in the phase-retrieved object, along with the necessary post-retrieval correction method. Part II builds upon the geometric theory developed in Part I with the formalism to correct the shear distortions directly on an orthogonal grid within the phase retrieval algorithm itself, allowing more physically realistic constraints to be applied.
△ Less
Submitted 15 August, 2019;
originally announced September 2019.
-
Heterodyne detection of radio-frequency electric fields using point defects in silicon carbide
Authors:
Gary Wolfowicz,
Christopher P. Anderson,
Samuel J. Whiteley,
David D. Awschalom
Abstract:
Sensing electric fields with high sensitivity, high spatial resolution and at radio frequencies can be challenging to realize. Recently, point defects in silicon carbide have shown their ability to measure local electric fields by optical charge conversion of their charge state. Here we report the combination of heterodyne detection with charge-based electric field sensing, solving many of the pre…
▽ More
Sensing electric fields with high sensitivity, high spatial resolution and at radio frequencies can be challenging to realize. Recently, point defects in silicon carbide have shown their ability to measure local electric fields by optical charge conversion of their charge state. Here we report the combination of heterodyne detection with charge-based electric field sensing, solving many of the previous limitations of this technique. Owing to the non-linear response of the charge conversion to electric fields, the application of a separate "pump" electric field results in a detection sensitivity as low as 1.1 (V/cm)/$\sqrt{Hz}$, with near-diffraction limited spatial resolution and tunable control of the sensor dynamic range. In addition, we show both incoherent and coherent heterodyne detection, allowing measurements of either unknown random fields or synchronized fields with higher sensitivities. Finally, we demonstrate in-plane vector measurements of the electric field by combining orthogonal pump electric fields. Overall, this work establishes charge-based measurements as highly relevant for solid-state defect sensing.
△ Less
Submitted 2 July, 2019;
originally announced July 2019.
-
Quantum well stabilized point defect spin qubits
Authors:
Ivády,
J. Davidsson,
N. Delegan,
A. L. Falk,
P. V. Klimov,
S. J. Whiteley,
S. O. Hruszkewycz,
M. V. Holt,
F. J. Heremans,
N. T. Son,
D. D. Awschalom,
I. A. Abrikosov,
A. Gali
Abstract:
Defect-based quantum systems in in wide bandgap semiconductors are strong candidates for scalable quantum-information technologies. However, these systems are often complicated by charge-state instabilities and interference by phonons, which can diminish spin-initialization fidelities and limit room-temperature operation. Here, we identify a pathway around these drawbacks by showing that an engine…
▽ More
Defect-based quantum systems in in wide bandgap semiconductors are strong candidates for scalable quantum-information technologies. However, these systems are often complicated by charge-state instabilities and interference by phonons, which can diminish spin-initialization fidelities and limit room-temperature operation. Here, we identify a pathway around these drawbacks by showing that an engineered quantum well can stabilize the charge state of a qubit. Using density-functional theory and experimental synchrotron x-ray diffraction studies, we construct a model for previously unattributed point defect centers in silicon carbide (SiC) as a near-stacking fault axial divacancy and show how this model explains these defect's robustness against photoionization and room temperature stability. These results provide a materials-based solution to the optical instability of color centers in semiconductors, paving the way for the development of robust single-photon sources and spin qubits.
△ Less
Submitted 21 April, 2020; v1 submitted 28 May, 2019;
originally announced May 2019.
-
Atomic layer deposition of titanium nitride for quantum circuits
Authors:
A. Shearrow,
G. Koolstra,
S. J. Whiteley,
N. Earnest,
P. S. Barry,
F. J. Heremans,
D. D. Awschalom,
E. Shirokoff,
D. I. Schuster
Abstract:
Superconducting thin films with high intrinsic kinetic inductance are of great importance for photon detectors, achieving strong coupling in hybrid systems, and protected qubits. We report on the performance of titanium nitride resonators, patterned on thin films (9-110 nm) grown by atomic layer deposition, with sheet inductances of up to 234 pH/square. For films thicker than 14 nm, quality factor…
▽ More
Superconducting thin films with high intrinsic kinetic inductance are of great importance for photon detectors, achieving strong coupling in hybrid systems, and protected qubits. We report on the performance of titanium nitride resonators, patterned on thin films (9-110 nm) grown by atomic layer deposition, with sheet inductances of up to 234 pH/square. For films thicker than 14 nm, quality factors measured in the quantum regime range from 0.4 to 1.0 million and are likely limited by dielectric two-level systems. Additionally, we show characteristic impedances up to 28 kOhm, with no significant degradation of the internal quality factor as the impedance increases. These high impedances correspond to an increased single photon coupling strength of 24 times compared to a 50 Ohm resonator, transformative for hybrid quantum systems and quantum sensing.
△ Less
Submitted 24 August, 2018; v1 submitted 17 August, 2018;
originally announced August 2018.
-
Quantum Sensing for High Energy Physics
Authors:
Zeeshan Ahmed,
Yuri Alexeev,
Giorgio Apollinari,
Asimina Arvanitaki,
David Awschalom,
Karl K. Berggren,
Karl Van Bibber,
Przemyslaw Bienias,
Geoffrey Bodwin,
Malcolm Boshier,
Daniel Bowring,
Davide Braga,
Karen Byrum,
Gustavo Cancelo,
Gianpaolo Carosi,
Tom Cecil,
Clarence Chang,
Mattia Checchin,
Sergei Chekanov,
Aaron Chou,
Aashish Clerk,
Ian Cloet,
Michael Crisler,
Marcel Demarteau,
Ranjan Dharmapalan
, et al. (91 additional authors not shown)
Abstract:
Report of the first workshop to identify approaches and techniques in the domain of quantum sensing that can be utilized by future High Energy Physics applications to further the scientific goals of High Energy Physics.
Report of the first workshop to identify approaches and techniques in the domain of quantum sensing that can be utilized by future High Energy Physics applications to further the scientific goals of High Energy Physics.
△ Less
Submitted 29 March, 2018;
originally announced March 2018.
-
Microscale resolution thermal mapping using a flexible platform of patterned quantum sensors
Authors:
Paolo Andrich,
Jiajing Li,
Xiaoying Liu,
F. Joseph Heremans,
Paul F. Nealey,
David D. Awschalom
Abstract:
Temperature sensors with micro- and nanoscale spatial resolution have long been explored for their potential to investigate the details of physical systems at an unprecedented scale. In particular, the rapid miniaturization of transistor technology, with the associated steep boost in power density, calls for sensors that accurately monitor heating distributions. Here, we report on a simple and sca…
▽ More
Temperature sensors with micro- and nanoscale spatial resolution have long been explored for their potential to investigate the details of physical systems at an unprecedented scale. In particular, the rapid miniaturization of transistor technology, with the associated steep boost in power density, calls for sensors that accurately monitor heating distributions. Here, we report on a simple and scalable fabrication approach, based on directed self-assembly and transfer printing techniques, to construct arrays of nanodiamonds containing temperature sensitive fluorescent spin defects. The nanoparticles are embedded within a low thermal conductivity matrix that allows for repeated use on a wide range of systems with minimal spurious effects. Additionally, we demonstrate access to a wide spectrum of array parameters ranging from sparser single particle arrays to denser devices with approximately 100 % yield and stronger photoluminescence signal, ideal for temperature measurements. With these we experimentally reconstruct the temperature map of an operating coplanar waveguide to confirm the accuracy of these platforms.
△ Less
Submitted 17 March, 2018;
originally announced March 2018.
-
Electrometry by optical charge conversion of deep defects in 4H-SiC
Authors:
G. Wolfowicz,
S. J. Whiteley,
D. D. Awschalom
Abstract:
Optically-active point defects in various host materials, such as diamond and silicon carbide (SiC), have shown significant promise as local sensors of magnetic fields, electric fields, strain and temperature. Current sensing techniques take advantage of the relaxation and coherence times of the spin state within these defects. Here we show that the defect charge state can also be used to sense th…
▽ More
Optically-active point defects in various host materials, such as diamond and silicon carbide (SiC), have shown significant promise as local sensors of magnetic fields, electric fields, strain and temperature. Current sensing techniques take advantage of the relaxation and coherence times of the spin state within these defects. Here we show that the defect charge state can also be used to sense the environment, in particular high frequency (MHz-GHz) electric fields, complementing established spin-based techniques. This is enabled by optical charge conversion of the defects between their photoluminescent and dark charge states, with conversion rate dependent on the electric field (energy density). The technique provides an all-optical high frequency electrometer which is tested in 4H-SiC for both ensembles of divacancies and silicon vacancies, from cryogenic to room temperature, and with a measured sensitivity of ~41 (V/cm)**2 / $\sqrt{Hz}$. Finally, due to the piezoelectric character of SiC, we obtain spatial 3D maps of surface acoustic wave modes in a mechanical resonator.
△ Less
Submitted 15 March, 2018;
originally announced March 2018.
-
Suppressing Spectral Diffusion of the Emitted Photons with Optical Pulses
Authors:
H. F. Fotso,
A. E. Feiguin,
D. D. Awschalom,
V. V. Dobrovitski
Abstract:
In many quantum architectures the solid-state qubits, such as quantum dots or color centers, are interfaced via emitted photons. However, the frequency of photons emitted by solid-state systems exhibits slow uncontrollable fluctuations over time (spectral diffusion), creating a serious problem for implementation of the photon-mediated protocols. Here we show that a sequence of optical pulses appli…
▽ More
In many quantum architectures the solid-state qubits, such as quantum dots or color centers, are interfaced via emitted photons. However, the frequency of photons emitted by solid-state systems exhibits slow uncontrollable fluctuations over time (spectral diffusion), creating a serious problem for implementation of the photon-mediated protocols. Here we show that a sequence of optical pulses applied to the solid-state emitter can stabilize the emission line at the desired frequency. We demonstrate efficiency, robustness, and feasibility of the method analytically and numerically. Taking nitrogen-vacancy (NV) center in diamond as an example, we show that only several pulses, with the width of 1 ns, separated by few ns (which is not difficult to achieve) can suppress spectral diffusion. Our method provides a simple and robust way to greatly improve the efficiency of photon-mediated entanglement and/or coupling to photonic cavities for solid-state qubits.
△ Less
Submitted 17 December, 2015;
originally announced December 2015.
-
Cavity-enhanced measurements of defect spins in silicon carbide
Authors:
Greg Calusine,
Alberto Politi,
David D. Awschalom
Abstract:
The identification of new solid-state defect qubit candidates in widely used semiconductors has the potential to enable the use of nanofabricated devices for enhanced qubit measurement and control operations. In particular, the recent discovery of optically active spin states in silicon carbide thin films offers a scalable route for incorporating defect qubits into on-chip photonic devices. Here w…
▽ More
The identification of new solid-state defect qubit candidates in widely used semiconductors has the potential to enable the use of nanofabricated devices for enhanced qubit measurement and control operations. In particular, the recent discovery of optically active spin states in silicon carbide thin films offers a scalable route for incorporating defect qubits into on-chip photonic devices. Here we demonstrate the use of 3C silicon carbide photonic crystal cavities for enhanced excitation of color center defect spin ensembles in order to increase measured photoluminescence signal count rates, optically detected magnetic resonance signal intensities, and optical spin initialization rates. We observe up to a factor of 30 increase in the photoluminescence and ODMR signals from Ky5 color centers excited by cavity resonant excitation and increase the rate of ground-state spin initialization by approximately a factor of two. Furthermore, we show that the small excitation mode volume and enhanced excitation and collection efficiencies provided by the structures can be used to study inhomogeneous broadening in defect qubit ensembles. These results highlight some of the benefits that nanofabricated devices offer for engineering the local photonic environment of color center defect qubits to enable applications in quantum information and sensing.
△ Less
Submitted 8 October, 2015;
originally announced October 2015.
-
Optical manipulation of Berry phase in a solid-state spin qubit
Authors:
Christopher G. Yale,
F. Joseph Heremans,
Brian B. Zhou,
Adrian Auer,
Guido Burkard,
David D. Awschalom
Abstract:
The phase relation between quantum states represents an essential resource for the storage and processing of quantum information. While quantum phases are commonly controlled dynamically by tuning energetic interactions, utilizing geometric phases that accumulate during cyclic evolution may offer superior robustness to noise. To date, demonstrations of geometric phase control in solid-state system…
▽ More
The phase relation between quantum states represents an essential resource for the storage and processing of quantum information. While quantum phases are commonly controlled dynamically by tuning energetic interactions, utilizing geometric phases that accumulate during cyclic evolution may offer superior robustness to noise. To date, demonstrations of geometric phase control in solid-state systems rely on microwave fields that have limited spatial resolution. Here, we demonstrate an all-optical method based on stimulated Raman adiabatic passage to accumulate a geometric phase, the Berry phase, in an individual nitrogen-vacancy (NV) center in diamond. Using diffraction-limited laser light, we guide the NV center's spin along loops on the Bloch sphere to enclose arbitrary Berry phase and characterize these trajectories through time-resolved state tomography. We investigate the limits of this control due to loss of adiabiaticity and decoherence, as well as its robustness to noise intentionally introduced into the experimental control parameters, finding its resilience to be independent of the amount of Berry phase enclosed. These techniques set the foundation for optical geometric manipulation in future implementations of photonic networks of solid state qubits linked and controlled by light.
△ Less
Submitted 31 July, 2015;
originally announced July 2015.
-
Deterministic coupling of delta-doped NV centers to a nanobeam photonic crystal cavity
Authors:
Jonathan C. Lee,
David O. Bracher,
Shanying Cui,
Kenichi Ohno,
Claire A. McLellan,
Xingyu Zhang,
Paolo Andrich,
Benjamin Aleman,
Kasey J. Russell,
Andrew P. Magyar,
Igor Aharonovich,
Ania Bleszynski Jayich,
David Awschalom,
Evelyn L. Hu
Abstract:
The negatively-charged nitrogen vacancy center (NV) in diamond has generated significant interest as a platform for quantum information processing and sensing in the solid state. For most applications, high quality optical cavities are required to enhance the NV zero-phonon line (ZPL) emission. An outstanding challenge in maximizing the degree of NV-cavity coupling is the deterministic placement o…
▽ More
The negatively-charged nitrogen vacancy center (NV) in diamond has generated significant interest as a platform for quantum information processing and sensing in the solid state. For most applications, high quality optical cavities are required to enhance the NV zero-phonon line (ZPL) emission. An outstanding challenge in maximizing the degree of NV-cavity coupling is the deterministic placement of NVs within the cavity. Here, we report photonic crystal nanobeam cavities coupled to NVs incorporated by a delta-doping technique that allows nanometer-scale vertical positioning of the emitters. We demonstrate cavities with Q up to ~24,000 and mode volume V ~ $0.47(λ/n)^{3}$ as well as resonant enhancement of the ZPL of an NV ensemble with Purcell factor of ~20. Our fabrication technique provides a first step towards deterministic NV-cavity coupling using spatial control of the emitters.
△ Less
Submitted 3 November, 2014;
originally announced November 2014.
-
Silicon Carbide Photonic Crystal Cavities with Integrated Color Centers
Authors:
Greg Calusine,
Alberto Politi,
David D. Awschalom
Abstract:
The recent discovery of color centers with optically addressable spin states in 3C silicon carbide (SiC) similar to the negatively charged nitrogen vacancy center in diamond has the potential to enable the integration of defect qubits into established wafer scale device architectures for quantum information and sensing applications. Here we demonstrate the design, fabrication, and characterization…
▽ More
The recent discovery of color centers with optically addressable spin states in 3C silicon carbide (SiC) similar to the negatively charged nitrogen vacancy center in diamond has the potential to enable the integration of defect qubits into established wafer scale device architectures for quantum information and sensing applications. Here we demonstrate the design, fabrication, and characterization of photonic crystal cavities in 3C SiC films with incorporated ensembles of color centers and quality factor (Q) to mode volume ratios similar to those achieved in diamond. Simulations show that optimized H1 and L3 structures exhibit Q as high as 45,000 and mode volumes of approximately $(λ/n)^{3}$. We utilize the internal color centers as a source of broadband excitation to characterize fabricated structures with resonances tuned to the color center zero phonon line and observe Q in the range of 900-1,500 with narrowband photoluminescence collection enhanced by up to a factor of 10. By comparing the Q factors observed for different geometries with finite-difference time-domain simulations, we find evidence that nonvertical sidewalls are likely the dominant source of discrepancies between our simulated and measured Q factors. These results indicate that defect qubits in 3C SiC thin films show clear promise as a simple, scalable platform for interfacing defect qubits with photonic, optoelectronic, and optomechanical devices.
△ Less
Submitted 19 May, 2014; v1 submitted 18 May, 2014;
originally announced May 2014.
-
Polytype control of spin qubits in silicon carbide
Authors:
Abram L. Falk,
Bob B. Buckley,
Greg Calusine,
William F. Koehl,
Viatcheslav V. Dobrovitski,
Alberto Politi,
Christian A. Zorman,
Philip X. -L. Feng,
David D. Awschalom
Abstract:
Crystal defects can confine isolated electronic spins and are promising candidates for solid-state quantum information. Alongside research focusing on nitrogen vacancy centers in diamond, an alternative strategy seeks to identify new spin systems with an expanded set of technological capabilities, a materials driven approach that could ultimately lead to "designer" spins with tailored properties.…
▽ More
Crystal defects can confine isolated electronic spins and are promising candidates for solid-state quantum information. Alongside research focusing on nitrogen vacancy centers in diamond, an alternative strategy seeks to identify new spin systems with an expanded set of technological capabilities, a materials driven approach that could ultimately lead to "designer" spins with tailored properties. Here, we show that the 4H, 6H and 3C polytypes of SiC all host coherent and optically addressable defect spin states, including spins in all three with room-temperature quantum coherence. The prevalence of this spin coherence shows that crystal polymorphism can be a degree of freedom for engineering spin qubits. Long spin coherence times allow us to use double electron-electron resonance to measure magnetic dipole interactions between spin ensembles in inequivalent lattice sites of the same crystal. Together with the distinct optical and spin transition energies of such inequivalent spins, these interactions provide a route to dipole-coupled networks of separately addressable spins.
△ Less
Submitted 10 May, 2013;
originally announced May 2013.
-
All-optical control of a solid-state spin using coherent dark states
Authors:
Christopher G. Yale,
Bob B. Buckley,
David J. Christle,
Guido Burkard,
F. Joseph Heremans,
Lee C. Bassett,
David D. Awschalom
Abstract:
The study of individual quantum systems in solids, for use as quantum bits (qubits) and probes of decoherence, requires protocols for their initialization, unitary manipulation, and readout. In many solid-state quantum systems, these operations rely on disparate techniques that can vary widely depending on the particular qubit structure. One such qubit, the nitrogen-vacancy (NV) center spin in dia…
▽ More
The study of individual quantum systems in solids, for use as quantum bits (qubits) and probes of decoherence, requires protocols for their initialization, unitary manipulation, and readout. In many solid-state quantum systems, these operations rely on disparate techniques that can vary widely depending on the particular qubit structure. One such qubit, the nitrogen-vacancy (NV) center spin in diamond, can be initialized and read out through its special spin selective intersystem crossing, while microwave electron spin resonance (ESR) techniques provide unitary spin rotations. Instead, we demonstrate an alternative, fully optical approach to these control protocols in an NV center that does not rely on its intersystem crossing. By tuning an NV center to an excited-state spin anticrossing at cryogenic temperatures, we use coherent population trapping and stimulated Raman techniques to realize initialization, readout, and unitary manipulation of a single spin. Each of these techniques can be directly performed along any arbitrarily-chosen quantum basis, removing the need for extra control steps to map the spin to and from a preferred basis. Combining these protocols, we perform measurements of the NV center's spin coherence, a demonstration of this full optical control. Consisting solely of optical pulses, these techniques enable control within a smaller footprint and within photonic networks. Likewise, this approach obviates the need for both ESR manipulation and spin addressability through the intersystem crossing. This method could therefore be applied to a wide range of potential solid-state qubits, including those which currently lack a means to be addressed.
△ Less
Submitted 6 March, 2013; v1 submitted 26 February, 2013;
originally announced February 2013.
-
Electron spin resonance of nitrogen-vacancy centers in optically trapped nanodiamonds
Authors:
Viva R. Horowitz,
Benjamín J. Alemán,
David J. Christle,
Andrew N. Cleland,
David D. Awschalom
Abstract:
Using an optical tweezers apparatus, we demonstrate three-dimensional control of nanodiamonds in solution with simultaneous readout of ground-state electron-spin resonance (ESR) transitions in an ensemble of diamond nitrogen-vacancy (NV) color centers. Despite the motion and random orientation of NV centers suspended in the optical trap, we observe distinct peaks in the measured ESR spectra qualit…
▽ More
Using an optical tweezers apparatus, we demonstrate three-dimensional control of nanodiamonds in solution with simultaneous readout of ground-state electron-spin resonance (ESR) transitions in an ensemble of diamond nitrogen-vacancy (NV) color centers. Despite the motion and random orientation of NV centers suspended in the optical trap, we observe distinct peaks in the measured ESR spectra qualitatively similar to the same measurement in bulk. Accounting for the random dynamics, we model the ESR spectra observed in an externally applied magnetic field to enable d.c. magnetometry in solution. We estimate the d.c. magnetic field sensitivity based on variations in ESR line shapes to be ~50 microTesla/Hz^1/2. This technique may provide a pathway for spin-based magnetic, electric, and thermal sensing in fluidic environments and biophysical systems inaccessible to existing scanning probe techniques.
△ Less
Submitted 7 June, 2012;
originally announced June 2012.
