-
Direct numerical simulations of inhalation in a 23-generation lung model
Authors:
Marco Atzori,
Emanuele Gallorini,
Ciro Cottini,
Andrea Benassi,
Maurizio Quadrio
Abstract:
The air flows in the proximal and distal portions of the human lungs are interconnected: the lower Reynolds number in the deeper generations causes a progressive flow regularization, while mass conservation requires flow rate oscillations to propagate through the airway bifurcations. To explain how these two competing effects shape the flow state in the deeper generations, we have performed the fi…
▽ More
The air flows in the proximal and distal portions of the human lungs are interconnected: the lower Reynolds number in the deeper generations causes a progressive flow regularization, while mass conservation requires flow rate oscillations to propagate through the airway bifurcations. To explain how these two competing effects shape the flow state in the deeper generations, we have performed the first high-fidelity numerical simulations of the air flow in a lung model including 23 successive bifurcations of a single planar airway. Turbulence modelling or assumptions on flow regimes are not required. The chosen flow rate is stationary (steady on average), and representative of the peak inspiratory flow reached by adult patients breathing through therapeutical inhalers. As expected, advection becomes progressively less important after each bifurcation, until a time-dependent Stokes regime governed solely by viscous diffusion is established in the smallest generations. However, fluctuations in this regime are relatively fast and large with respect to the mean flow, which is in contrast with the commonly agreed picture that only the breathing frequency is relevant at the scale of the alveoli. We demonstrate that the characteristic frequency and amplitude of these fluctuations are linked to the flow in the upper part of the bronchial tree, as they originate from the time-dependent flow splitting in the upper bifurcations. Even though these fluctuations are observed here in an idealized, rigid lung model, our findings suggest that the assumptions usually adopted in many of the current lung models might need to be revised.
△ Less
Submitted 17 June, 2025;
originally announced June 2025.
-
A simple and efficient second-order immersed-boundary method for the incompressible Navier--Stokes equations
Authors:
Paolo Luchini,
Davide Gatti,
Alessandro Chiarini,
Federica Gattere,
Marco Atzori,
Maurizio Quadrio
Abstract:
An immersed-boundary method for the incompressible Navier--Stokes equations is presented. It employs discrete forcing for a sharp discrimination of the solid-fluid interface, and achieves second-order accuracy, demonstrated in examples with highly complex three-dimensional geometries. The method is implicit, meaning that the point in the solid which is nearest to the interface is accounted for imp…
▽ More
An immersed-boundary method for the incompressible Navier--Stokes equations is presented. It employs discrete forcing for a sharp discrimination of the solid-fluid interface, and achieves second-order accuracy, demonstrated in examples with highly complex three-dimensional geometries. The method is implicit, meaning that the point in the solid which is nearest to the interface is accounted for implicitly, which benefits stability and convergence properties; the correction is also implicit in time (without requiring a matrix inversion), although the temporal integration scheme is fully explicit. The method stands out for its simplicity and efficiency: when implemented alongside second-order finite differences, only the weight of the center point of the Laplacian stencil in the momentum equation is modified, and no corrections for the continuity equation and the pressure are required. The immersed-boundary method, its performance and its accuracy are first verified on simple problems, and then put to test on a simple laminar, two-dimensional flow and on two more complex examples: the turbulent flow in a channel with a sinusoidal wall, and the flow in a human nasal cavity, whose extreme anatomical complexity mandates an accurate treatment of the boundary.
△ Less
Submitted 17 June, 2025;
originally announced June 2025.
-
Understanding the mismatch between in-vivo and in-silico rhinomanometry
Authors:
Marco Atzori,
Gabriele Dini Ciacci,
Maurizio Quadrio
Abstract:
Numerical simulations and clinical measurements of nasal resistance are in quantitative disagreement. Bias introduced by the design of medical devices has not been considered until now as a possible explanation. The aim of present paper is to study the effect of the location of the probe on the rhinomanometer that is meant to measure the ambient pressure. Rhinomanometry is carried out on a 3D sili…
▽ More
Numerical simulations and clinical measurements of nasal resistance are in quantitative disagreement. Bias introduced by the design of medical devices has not been considered until now as a possible explanation. The aim of present paper is to study the effect of the location of the probe on the rhinomanometer that is meant to measure the ambient pressure. Rhinomanometry is carried out on a 3D silicone model of a patient-specific anatomy; a clinical device and dedicated sensors are employed side-by-side for mutual validation. The same anatomy is also employed for numerical simulations, with approaches spanning a wide range of fidelity levels. We find that the intrinsic uncertainty of the numerical simulations is of minor importance. To the contrary, the position of the pressure tap intended to acquire the external pressure in the clinical device is crucial, and can cause a mismatch comparable to that generally observed between in-silico and in-vivo rhinomanometry data. A source of systematic bias may therefore exist in rhinomanometers, designed under the assumption that measurements of the nasal resistance are unaffected by the flow development within the instruments.
△ Less
Submitted 12 June, 2025;
originally announced June 2025.
-
Opposition control applied to turbulent wings
Authors:
Yuning Wang,
Marco Atzori,
Ricardo Vinuesa
Abstract:
We conducted high-resolution large-eddy simulations (LESs) to explore the effects of opposition control (OC) on turbulent boundary layers (TBLs) over a wing at a chord-based Reynolds number (${Re}_c$) of 200,000. Two scenarios were studied: flow over the suction sides of the NACA0012 wing section at a $0^{\circ}$ angle of attack, and the NACA4412 wing section at a $5^{\circ}$ angle of attack, repr…
▽ More
We conducted high-resolution large-eddy simulations (LESs) to explore the effects of opposition control (OC) on turbulent boundary layers (TBLs) over a wing at a chord-based Reynolds number (${Re}_c$) of 200,000. Two scenarios were studied: flow over the suction sides of the NACA0012 wing section at a $0^{\circ}$ angle of attack, and the NACA4412 wing section at a $5^{\circ}$ angle of attack, representing TBLs under mild and strong nonuniform adverse pressure gradients (APGs), respectively. Our results show that the effectiveness of OC in reducing friction drag decreases significantly with increasing APG intensity. This reduction is linked to intensified wall-normal convection caused by the stronger APG. OC, designed to reduce near-wall fluctuations, attenuates the outer peak of streamwise velocity fluctuations and the production term of the turbulent kinetic energy budget. We also confirmed the formation of a "virtual wall," where the balance between viscous diffusion and dissipation at the virtual wall plane mirrors that at the physical wall. Spectral analyses reveal that the wall-normal transport of small-scale structures to the outer region due to the APG negatively impacts OC performance. We also examined uniform blowing and body-force damping as control strategies. Uniform blowing mimics the effects of a stronger APG, while body-force damping shares similarities with OC in the streamwise development of the TBL, despite differences in turbulent statistics. This study is the first detailed analysis of OC applied to TBLs under nonuniform APGs with complex geometries.
△ Less
Submitted 28 August, 2024;
originally announced August 2024.
-
Aspect-ratio effect on the wake of a wall-mounted square cylinder immersed in a turbulent boundary layer
Authors:
Gerardo Zampino,
Marco Atzori,
Elias Zea,
Evelyn Otero,
Ricardo Vinuesa
Abstract:
The wake topology developing behind a wall-mounted square cylinder in a turbulent boundary layer has been investigated using a high-resolution large-eddy simulation (LES). The boundary-layer thickness at the obstacle location is fixed, the Reynolds number based on the cylinder h and the incoming free-stream velocity $u_\infty$ is 10,000 while the aspect ratio (AR), defined as obstacle height divid…
▽ More
The wake topology developing behind a wall-mounted square cylinder in a turbulent boundary layer has been investigated using a high-resolution large-eddy simulation (LES). The boundary-layer thickness at the obstacle location is fixed, the Reynolds number based on the cylinder h and the incoming free-stream velocity $u_\infty$ is 10,000 while the aspect ratio (AR), defined as obstacle height divided by its width, ranges from 1 to 4. The Reynolds stresses, anisotropy-invariant maps (AIM) and the turbulent kinetic energy (TKE) budget are analyzed to investigate the influence of AR on the wake structures and on the turbulence production and transport. In particular, the transition from a dipole configuration for low AR to a quadrupole wake is extensively discussed and examined. The necessity of more data to express this critical AR as a function of the momentum-thickness-based Reynolds number $Re_θ$ is thus highlighted. As an effect of the AR, the wake is deformed in both streamwise and spanwise directions. This contraction of the wake, attributed to the occurrence of the base vortices for the cases AR = 3 and 4, impacts the size of the positive production region that stretches from the roof and the flank of the obstacle to the wake core. The AIMs confirm the wake three-dimensionality and are used to describe the redistribution of the turbulent kinetic energy (TKE) along the three normal directions, in agreement with the literature [A. J. Simonsen and P. Krogstad, Phys. Fluids 17, 088103, (2005)]. The present analysis on the TKE budget displays a stronger turbulence production for the cases AR = 3 and 4, demonstrating the strong influence of the tip and base vortices in generating turbulence at the wall location behind the cylinder.
△ Less
Submitted 22 January, 2024;
originally announced January 2024.
-
Linear and nonlinear Granger causality analysis of turbulent duct flows
Authors:
Barbara Lopez-Doriga,
Marco Atzori,
Ricardo Vinuesa,
H. Jane Bae,
Ankit Srivastava,
Scott T. M. Dawson
Abstract:
This research focuses on the identification and causality analysis of coherent structures that arise in turbulent flows in square and rectangular ducts. Coherent structures are first identified from direct numerical simulation data via proper orthogonal decomposition (POD), both by using all velocity components, and after separating the streamwise and secondary components of the flow. The causal r…
▽ More
This research focuses on the identification and causality analysis of coherent structures that arise in turbulent flows in square and rectangular ducts. Coherent structures are first identified from direct numerical simulation data via proper orthogonal decomposition (POD), both by using all velocity components, and after separating the streamwise and secondary components of the flow. The causal relations between the mode coefficients are analysed using pairwise-conditional Granger causality analysis. We also formulate a nonlinear Granger causality analysis that can account for nonlinear interactions between modes. Focusing on streamwise-constant structures within a duct of short streamwise extent, we show that the causal relationships are highly sensitive to whether the mode coefficients or their squared values are considered, whether nonlinear effects are explicitly accounted for, and whether streamwise and secondary flow structures are separated prior to causality analyses. We leverage these sensitivities to determine that linear mechanisms underpin causal relationships between modes that share the same symmetry or anti-symmetry properties about the corner bisector, while nonlinear effects govern the causal interactions between symmetric and antisymmetric modes. In all cases, we find that the secondary flow fluctuations (manifesting as streamwise vorticial structures) are the primary cause of both the presence and movement of near-wall streaks towards and away from the duct corners.
△ Less
Submitted 11 January, 2024;
originally announced January 2024.
-
High-resolution large-eddy simulations of simplified urban flows
Authors:
Marco Atzori,
Pablo Torres,
Alvaro Vidal,
Soledad Le Clainche,
Sergio Hoyas,
Ricardo Vinuesa
Abstract:
High-fidelity large-eddy simulations of the flow around two rectangular obstacles are carried out at a Reynolds number of 10,000 based on the free-stream velocity and the obstacle height. The incoming flow is a developed turbulent boundary layer. Mean-velocity components, turbulence fluctuations, and the terms of the turbulent-kinetic-energy budget are analyzed for three flow regimes: skimming flo…
▽ More
High-fidelity large-eddy simulations of the flow around two rectangular obstacles are carried out at a Reynolds number of 10,000 based on the free-stream velocity and the obstacle height. The incoming flow is a developed turbulent boundary layer. Mean-velocity components, turbulence fluctuations, and the terms of the turbulent-kinetic-energy budget are analyzed for three flow regimes: skimming flow, wake interference, and isolated roughness. Three regions are identified where the flow undergoes the most significant changes: the first obstacle's wake, the region in front of the second obstacle, and that around the second obstacle. In the skimming-flow case, turbulence activity in the cavity between the obstacles is limited and mainly occurs in a small region in front of the second obstacle. In the wake-interference case, there is a strong interaction between the free-stream flow that penetrates the cavity and the wake of the first obstacle. This interaction results in more intense turbulent fluctuations between the obstacles. In the isolated-roughness case, the wake of the first obstacle is in good agreement with that of an isolated obstacle. Separation bubbles with strong turbulent fluctuations appear around the second obstacle.
△ Less
Submitted 14 July, 2022;
originally announced July 2022.
-
Tripping and laminar--turbulent transition: Implementation in RANS--EVM
Authors:
N. Tabatabaei,
G. Fahland,
A. Stroh,
D. Gatti,
B. Frohnapfel,
M. Atzori,
R. Vinuesa1,
P. Schlatter
Abstract:
Fundamental fluid--mechanics studies and many engineering developments are based on tripped cases. Therefore, it is essential for CFD simulations to replicate the same forced transition in spite of the availability of advanced transition modelling. In the last decade, both direct and large--eddy simulations (DNS and LES) include tripping methods in an effort to avoid the need for modeling the comp…
▽ More
Fundamental fluid--mechanics studies and many engineering developments are based on tripped cases. Therefore, it is essential for CFD simulations to replicate the same forced transition in spite of the availability of advanced transition modelling. In the last decade, both direct and large--eddy simulations (DNS and LES) include tripping methods in an effort to avoid the need for modeling the complex mechanisms associated with the natural transition process, which we would like to bring over to Reynolds--averaged Navier--Stokes (RANS) turbulence models. This paper investigates the necessity and applications of numerical tripping, despite of the developments in numerical modeling of natural transition. The second goal of this paper is to assess a technique to implement tripping in eddy-viscosity models (EVM) for RANS. A recent approach of turbulence generation, denoted as turbulence-injection method (kI), is evaluated and investigated through different test cases ranging from a turbulent boundary layer on a flat plate to the three dimensional(3D) flow over a wing section. The desired tripping is achieved at the target location and the simulation results compare favorably with the reference results (DNS, LES and measured data). With the application of the model, the challenging transition region can be minimized in a simulation, and consequently more reliable results are obtained.
△ Less
Submitted 26 July, 2021;
originally announced July 2021.
-
Decomposition of the mean friction drag on a NACA4412 airfoil under uniform blowing/suction
Authors:
Yitong Fan,
Marco Atzori,
Ricardo Vinuesa,
Davide Gatti,
Philipp Schlatter,
Weipeng Li
Abstract:
The application of drag-control strategies on canonical wall-bounded turbulence, such as periodic channel and zero- or adverse-pressure-gradient boundary layers, raises the question of how to describe control effects consistently for different reference cases. We employ the RD identity (Renard & Deck, J. Fluid Mech., 790, 2016, pp. 339-367) to decompose the mean friction drag and investigate the c…
▽ More
The application of drag-control strategies on canonical wall-bounded turbulence, such as periodic channel and zero- or adverse-pressure-gradient boundary layers, raises the question of how to describe control effects consistently for different reference cases. We employ the RD identity (Renard & Deck, J. Fluid Mech., 790, 2016, pp. 339-367) to decompose the mean friction drag and investigate the control effects of uniform blowing and suction applied to a NACA4412 airfoil at chord Reynolds numbers Re_c=200,000 and 400,000. The connection of the drag reduction/increase by using blowing/suction with the turbulence statistics (including viscous dissipation, turbulence-kinetic-energy production, and spatial growth of the flow) across the boundary layer, subjected to adverse or favorable pressure gradients, are examined. We found that the peaks of the statistics associated with the friction-drag generation exhibit good scaling in either inner or outer units throughout the boundary layer. They are also independent of the Reynolds number, control scheme, and intensity of the blowing/suction. The small- and large-scale structures are separated with an adaptive scale-decomposition method, i.e. empirical mode decomposition (EMD), aiming to analyze the scale-specific contribution of turbulent motions to friction-drag generation. Results unveil that blowing on the suction side of the airfoil is able to enhance the contribution of large-scale motions and to suppress that of small-scales; on the other hand, suction behaves contrarily. The contributions related to cross-scale interactions remain almost unchanged with different control strategies.
△ Less
Submitted 7 June, 2021;
originally announced June 2021.
-
Macroscopic Magneto-Chiroptical Metasurfaces
Authors:
Gaia Petrucci,
Alessio Gabbani,
Esteban Pedrueza-Villalmanzo,
Giuseppe Cucinotta,
Matteo Atzori,
Alexandre Dmitriev,
Francesco Pineider
Abstract:
Nanophotonic chiral antennas exhibit orders of magnitude higher circular dichroism (CD) compared to molecular systems. Merging magnetism and structural chirality at the nanometric level allows for the efficient magnetic control of the dichroic response, bringing exciting new prospects to active nanophotonic devices and magnetochirality. Here we devise macroscale enantiomeric magnetophotonic metasu…
▽ More
Nanophotonic chiral antennas exhibit orders of magnitude higher circular dichroism (CD) compared to molecular systems. Merging magnetism and structural chirality at the nanometric level allows for the efficient magnetic control of the dichroic response, bringing exciting new prospects to active nanophotonic devices and magnetochirality. Here we devise macroscale enantiomeric magnetophotonic metasurfaces of plasmon and ferromagnetic spiral antennas. Mixed 2D- and 3D- chiral nanoantennas induce large CD response, where we identify reciprocal and non-reciprocal contributions. The simultaneous chiroptical and magneto-optical response in a wide spectral range with these metasurfaces delivers an attractive platform for the study of magnetochirality at the nanoscale. Exploring further this type of magnetophotonic metasurfaces allows the realization of high-sensitivity chiral sensors and prompts the design of novel macroscopic optical devices operating with polarized light.
△ Less
Submitted 22 March, 2021;
originally announced March 2021.
-
Coherent structures and secondary flow in turbulent square duct
Authors:
Marco Atzori,
Ricardo Vinuesa,
Adrián Lozano-Durán,
Philipp Schlatter
Abstract:
The aim of the present work is to investigate the role of coherent structures in the generation of the secondary flow in a turbulent square duct. The coherent structures are defined as connected regions of flow where the product of the instantaneous fluctuations of two velocity components is higher than a threshold based on the long-time turbulence statistics, in the spirit of the three-dimensiona…
▽ More
The aim of the present work is to investigate the role of coherent structures in the generation of the secondary flow in a turbulent square duct. The coherent structures are defined as connected regions of flow where the product of the instantaneous fluctuations of two velocity components is higher than a threshold based on the long-time turbulence statistics, in the spirit of the three-dimensional quadrant analysis proposed by Lozano-Durán et al. (J. Fluid Mech., vol. 694, 2012, pp. 100-130). We consider both the direct contribution of the structures to the mean in-plane velocity components and their geometrical properties. The instantaneous phenomena taking place in the turbulent duct are compared with turbulent channel flow at Reynolds numbers of $Re_τ=180$ and $360$, based on friction velocity at the center-plane and channel half height. In the core region of the duct, the fractional contribution of intense events to the wall-normal component of the mean velocity is in very good agreement with that in the channel, despite the presence of the secondary flow in the former. Additionally, the shapes of the three-dimensional objects do not differ significantly in both flows. On the other hand, in the corner region of the duct, the proximity of the walls affects both the geometrical properties of the coherent structures and the contribution to the mean component of the vertical velocity, which is less relevant than that of the complementary portion of the flow not included in such objects. Our results show however that strong Reynolds shear-stress events, despite the differences observed between channel and duct, do not contribute directly to the secondary motion, and thus other phenomena need to be considered instead.
△ Less
Submitted 3 June, 2019;
originally announced June 2019.
-
Turbulent boundary layers around wing sections up to Rec = 1,000,000
Authors:
R. Vinuesa,
P. S. Negi,
M. Atzori,
A. Hanifi,
D. S. Henningson,
P. Schlatter
Abstract:
Reynolds-number effects in the adverse-pressure-gradient (APG) turbulent boundary layer (TBL) developing on the suction side of a NACA4412 wing section are assessed in the present work. To this end, we analyze four cases at Reynolds numbers based on freestream velocity and chord length ranging from Rec = 100, 000 to 1,000,000, all of them with 5 degree angle of attack. The results of four well-res…
▽ More
Reynolds-number effects in the adverse-pressure-gradient (APG) turbulent boundary layer (TBL) developing on the suction side of a NACA4412 wing section are assessed in the present work. To this end, we analyze four cases at Reynolds numbers based on freestream velocity and chord length ranging from Rec = 100, 000 to 1,000,000, all of them with 5 degree angle of attack. The results of four well-resolved large-eddy simulations (LESs) are used to characterize the effect of Reynolds number on APG TBLs subjected to approximately the same pressure-gradient distribution (defined by the Clauser pressure-gradient parameter beta). Comparisons of the wing profiles with zero-pressure-gradient (ZPG) data at matched friction Reynolds numbers reveal that, for approximately the same beta distribution, the lower-Reynolds-number boundary layers are more sensitive to pressure-gradient effects. This is reflected in the values of the inner-scaled edge velocity Ue+ , the shape factor H, the components of the Reynolds-stress tensor in the outer region and the outer-region production of turbulent kinetic energy. This conclusion is supported by the larger wall-normal velocities and outer-scaled fluctuations observed in the lower-Rec cases.Thus, our results suggest that two complementing mechanisms contribute to the development of the outer region in TBLs and the formation of large-scale energetic structures: one mechanism associated with the increase in Reynolds number, and another one connected to the APG. Future extensions of the present work will be aimed at studying the differences in the outer-region energizing mechanisms due to APGs and increasing Reynolds number.
△ Less
Submitted 16 April, 2019;
originally announced April 2019.
-
First-principles investigation of spin-phonon coupling in vanadium-based molecular spin qubits
Authors:
Andrea Albino,
Stefano Benci,
Lorenzo Tesi,
Matteo Atzori,
Renato Torre,
Stefano Sanvito,
Roberta Sessoli,
Alessandro Lunghi
Abstract:
Paramagnetic molecules can show long spin-coherence times, which make them good candidates as quantum bits. Reducing the efficiency of the spin-phonon interaction is the primary challenge towards achieving long coherence times over a wide temperature range in soft molecular lattices. The lack of a microscopic understanding about the role of vibrations in spin relaxation strongly undermines the pos…
▽ More
Paramagnetic molecules can show long spin-coherence times, which make them good candidates as quantum bits. Reducing the efficiency of the spin-phonon interaction is the primary challenge towards achieving long coherence times over a wide temperature range in soft molecular lattices. The lack of a microscopic understanding about the role of vibrations in spin relaxation strongly undermines the possibility to chemically design better performing molecular qubits. Here we report a first-principles characterization of the main mechanism contributing to the spin-phonon coupling for a class of vanadium(IV) molecular qubits. Post Hartree Fock and Density Functional Theory are used to determine the effect of both reticular and intra-molecular vibrations on the modulation of the Zeeman energy for four molecules showing different coordination geometries and ligands. This comparative study provides the first insight into the role played by coordination geometry and ligand field strength in determining the spin-lattice relaxation time of molecular qubits, opening the avenue to a rational design of new compounds.
△ Less
Submitted 9 April, 2019;
originally announced April 2019.
-
Assessment of skin-friction-reduction techniques on a turbulent wing section
Authors:
M. Atzori,
R. Vinuesa,
A. Stroh,
B. Frohnapfel,
P. Schlatter
Abstract:
The scope of the present project is to quantify the effects of uniform blowing and body-force damping on turbulent boundary layers subjected to a non-uniform adverse-pressure-gradient distribution. To this end, well-resolved large-eddy simulations are employed to describe the flow around the NACA4412 airfoil at moderate Reynolds number 200, 000 based on freestream velocity and chord length. In the…
▽ More
The scope of the present project is to quantify the effects of uniform blowing and body-force damping on turbulent boundary layers subjected to a non-uniform adverse-pressure-gradient distribution. To this end, well-resolved large-eddy simulations are employed to describe the flow around the NACA4412 airfoil at moderate Reynolds number 200, 000 based on freestream velocity and chord length. In the present paper we focus on uniform blowing and the conference presentation will include a comparison with body-force damping applied in the same region. The inner-scaled profiles of the mean velocity and of selected components of the Reynolds-stress tensor are examined and compared with the uncontrolled cases. It is known that uniform blowing and adverse-pressure gradients share some similarities in their effect on the boundary layers, and our results will show that these effects are not independent. The behaviour of the skin-friction coefficient is analyzed through the FIK decomposition, and the impact of this control strategy on the aerodynamic efficiency of the airfoil is discussed.
△ Less
Submitted 10 December, 2018;
originally announced December 2018.
-
Reynolds-number effects in turbulent boundary layers around wing sections
Authors:
Ricardo Vinuesa,
Prabal Negi,
Marco Atzori,
Ardeshir Hanifi,
Dan S. Henningson,
Philipp Schlatter
Abstract:
Four well-resolved LESs of the turbulent boundary layers around a NACA4412 wing section, with Rec ranging from 100,000 to 1,000,000, were performed at 5 degree angle of attack. By comparing the turbulence statistics with those in ZPG TBLs at approximately matching Re_tau, we find that the effect of the adverse pressure gradient (APG) is more intense at lower Reynolds numbers. This indicates that a…
▽ More
Four well-resolved LESs of the turbulent boundary layers around a NACA4412 wing section, with Rec ranging from 100,000 to 1,000,000, were performed at 5 degree angle of attack. By comparing the turbulence statistics with those in ZPG TBLs at approximately matching Re_tau, we find that the effect of the adverse pressure gradient (APG) is more intense at lower Reynolds numbers. This indicates that at low Re the outer region of the TBL becomes more energized through the wall-normal convection associated to the APG. This is also reflected in the fact that the inner-scaled wall-normal velocity is larger on the suction side at lower Reynolds numbers. In particular, the wing cases at Rec = 200,000 and 400,000 exhibit wall-normal velocities 40% and 20% larger, respectively, than the case with Rec = 1,000,000. Consequently, the outer-region energizing mechanism associated to the APG is complementary to that present in high-Re TBLs.
△ Less
Submitted 10 December, 2018;
originally announced December 2018.
