-
Commissioning of a compact multibend achromat lattice: A new 3 GeV synchrotron radiation facility
Authors:
Shuhei Obara,
Kota Ueshima,
Takao Asaka,
Yuji Hosaka,
Koichi Kan,
Nobuyuki Nishimori,
Toshitaka Aoki,
Hiroyuki Asano,
Koichi Haga,
Yuto Iba,
Akira Ihara,
Katsumasa Ito,
Taiki Iwashita,
Masaya Kadowaki,
Rento Kanahama,
Hajime Kobayashi,
Hideki Kobayashi,
Hideo Nishihara,
Masaaki Nishikawa,
Haruhiko Oikawa,
Ryota Saida,
Keisuke Sakuraba,
Kento Sugimoto,
Masahiro Suzuki,
Kouki Takahashi
, et al. (57 additional authors not shown)
Abstract:
NanoTerasu, a new 3 GeV synchrotron light source in Japan, began user operation in April 2024. It provides high-brilliance soft to tender X-rays and covers a wide spectral range from ultraviolet to tender X-rays. Its compact storage ring with a circumference of 349 m is based on a four-bend achromat lattice to provide two straight sections in each cell for insertion devices with a natural horizont…
▽ More
NanoTerasu, a new 3 GeV synchrotron light source in Japan, began user operation in April 2024. It provides high-brilliance soft to tender X-rays and covers a wide spectral range from ultraviolet to tender X-rays. Its compact storage ring with a circumference of 349 m is based on a four-bend achromat lattice to provide two straight sections in each cell for insertion devices with a natural horizontal emittance of 1.14 nm rad, which is small enough for soft X-rays users. The NanoTerasu accelerator incorporates several innovative technologies, including a full-energy injector C-band linear accelerator with a length of 110 m, an in-vacuum off-axis injection system, a four-bend achromat with B-Q combined bending magnets, and a TM020 mode accelerating cavity with built-in higher-order-mode dampers in the storage ring. This paper presents the accelerator machine commissioning over a half-year period and our model-consistent ring optics correction. The first user operation with a stored beam current of 160 mA is also reported. We summarize the storage ring parameters obtained from the commissioning. This is helpful for estimating the effective optical properties of synchrotron radiation at NanoTerasu.
△ Less
Submitted 11 July, 2024;
originally announced July 2024.
-
Machine learning-based vorticity evolution and superresolution of homogeneous isotropic turbulence using wavelet projection
Authors:
Tomoki Asaka,
Katsunori Yoshimatsu,
Kai Schneider
Abstract:
A wavelet-based machine learning method is proposed for predicting the time evolution of homogeneous isotropic turbulence where vortex tubes are preserved. Three-dimensional convolutional neural networks and long short-term memory are trained with a time series of direct numerical simulation (DNS) data of homogeneous isotropic turbulence at the Taylor microscale Reynolds number 92. The predicted r…
▽ More
A wavelet-based machine learning method is proposed for predicting the time evolution of homogeneous isotropic turbulence where vortex tubes are preserved. Three-dimensional convolutional neural networks and long short-term memory are trained with a time series of direct numerical simulation (DNS) data of homogeneous isotropic turbulence at the Taylor microscale Reynolds number 92. The predicted results are assessed by using flow visualization of vorticity and statistics, e.g., probability density functions of vorticity and enstrophy spectra. It is found that the predicted results are in good agreement with DNS results. The small-scale flow topology considering the second and third invariant of the velocity gradient tensor likewise shows an approximate match. Furthermore, we apply the pre-trained neural networks to coarse-grained vorticity data using superresolution. It is shown that the superresolved flow field well agrees with the reference DNS field and thus small-scale information and vortex tubes are well regenerated.
△ Less
Submitted 2 April, 2024;
originally announced April 2024.
-
An electron linac with high beam intensity over 1-Ampere for disposal of radioactive waste
Authors:
Y. Kawashima,
T. Asaka,
H. Ego,
M. Hara
Abstract:
In order to dissipate long-lived radioactive waste, not only high ux proton accelerator but also electron linac have been proposed. A proton accelerator directly induces nuclear fission and mutation. On the other hand, electron beam has two processes: production of gamma rays through bremsstrahlung and produced gamma rays are available for the (gamma ; n) reaction. Protons dissipate nuclei and sim…
▽ More
In order to dissipate long-lived radioactive waste, not only high ux proton accelerator but also electron linac have been proposed. A proton accelerator directly induces nuclear fission and mutation. On the other hand, electron beam has two processes: production of gamma rays through bremsstrahlung and produced gamma rays are available for the (gamma ; n) reaction. Protons dissipate nuclei and simultaneously newly produce radioisotopes of by-products. Since an electron linac produces less radioactive wastes, we focus only an electron linac with high beam intensity more than 1-Ampere. To reduce the yield of by-products for radioisotopes as less as possible, we accelerate electron beam with the energy less than 30 MeV. The accelerated beam intensity is designed to be more than 1-Ampere. To realize an electron linac with high intensity, the operation for the linac is not pulsed one, but continuous wave. To accelerate electron beam, we install higher-order-modes (HOMs) free normal conducting cavities to suppress beam instabilities.
△ Less
Submitted 29 March, 2020;
originally announced March 2020.
-
Upgrade of Linac Control System with New Vme Controllers at Spring-8
Authors:
T. Masuda,
T. Ohata,
T. Asaka,
H. Dewa,
T. Fukui,
H. Hanaki,
N. Hosoda,
T. Kobayashi,
M. Kodera,
A. Mizuno,
S. Nakajima,
S. Suzuki,
M. Takao,
R. Tanaka,
T. Taniuchi,
Y. Taniuchi,
H. Tomizawa,
A. Yamashita,
K. Yanagida
Abstract:
We integrated an injector linac control system to the SPring-8 standard system on September 2000. As a result of this integration, the SPring-8 accelerator complex was controlled by one unified system. Because the linac was continuously running as the electron beam injector not only for the SPring-8 storage ring but also for New SUBARU, we had to minimize the hardware modification to reduce the…
▽ More
We integrated an injector linac control system to the SPring-8 standard system on September 2000. As a result of this integration, the SPring-8 accelerator complex was controlled by one unified system. Because the linac was continuously running as the electron beam injector not only for the SPring-8 storage ring but also for New SUBARU, we had to minimize the hardware modification to reduce the time for the development and testing of the new control system. The integration method was almost the same as that of the integration of the booster synchrotron. We report here on the integration of the linac control system with emphasis on the upgrade of the VMEbus controllers and software involving the operating system Solaris 7 as the real-time OS.
△ Less
Submitted 14 December, 2001; v1 submitted 15 November, 2001;
originally announced November 2001.
-
Timing System of SPring-8 Booster Synchrotron
Authors:
N. Hosoda,
T. Ohshima,
T. Aoki,
T. Asaka,
H. Ego,
K. Fukami,
Y. Kawashima,
Y. Ohashi,
T. Takashima,
H. Yonehara
Abstract:
The timing system of SPring-8 booster synchrotron generates various timing signals concerning beam injection, acceleration from 1 GeV to 8 GeV and ejection. We have improved the timing system of the synchrotron giving it better stability and flexibility. This improvement results the other merits of advanced operations, for example, storing electron beam in the synchrotron, changing the injection…
▽ More
The timing system of SPring-8 booster synchrotron generates various timing signals concerning beam injection, acceleration from 1 GeV to 8 GeV and ejection. We have improved the timing system of the synchrotron giving it better stability and flexibility. This improvement results the other merits of advanced operations, for example, storing electron beam in the synchrotron, changing the injection cycle from 1 Hz to the slower frequency to increase the RF knock-out (RF-KO) operation period and ejecting the low energy beam during ramping up.
△ Less
Submitted 10 December, 2001; v1 submitted 11 November, 2001;
originally announced November 2001.
