-
Modelling of shattered pellet injection experiments on the ASDEX Upgrade tokamak
Authors:
Ansh Patel,
Akinobu Matsuyama,
Gergely Papp,
Michael Lehnen,
J Artola,
Stefan Jachmich,
Emiliano Fable,
Alexander Bock,
Bernd Kurzan,
Matthias Hölzl,
Weikang Tang,
Michael Dunne,
Rainer Fischer,
Paul Heinrich,
The ASDEX Upgrade Team,
The EUROfusion Tokamak Exploitation Team
Abstract:
In a shattered pellet injection (SPI) system the penetration and assimilation of the injected material depends on the speed and size distribution of the SPI fragments. ASDEX Upgrade (AUG) was recently equipped with a flexible SPI to study the effect of these parameters on disruption mitigation efficiency. In this paper we study the impact of different parameters on SPI assimilation with the 1.5D I…
▽ More
In a shattered pellet injection (SPI) system the penetration and assimilation of the injected material depends on the speed and size distribution of the SPI fragments. ASDEX Upgrade (AUG) was recently equipped with a flexible SPI to study the effect of these parameters on disruption mitigation efficiency. In this paper we study the impact of different parameters on SPI assimilation with the 1.5D INDEX code. Scans of fragment sizes, speeds and different pellet compositions are carried out for single SPI into AUG H-mode plasmas. We use a semi-empirical thermal quench (TQ) onset condition to study the material assimilation trends. For mixed deuterium-neon pellets, smaller/faster fragments start to assimilate quicker. However, at the expected onset of the global reconnection event (GRE),larger/faster fragments end up assimilating more material. Variations in the injected neon content lead to a large difference in the assimilated neon for neon content below $< 10^{21}$ atoms. For larger injected neon content, a self-regulating mechanism limits the variation in the amount of assimilated neon. We use a back-averaging model to simulate the plasmoid drift during pure deuterium injections with the back-averaging parameter determined by a interpretative simulation of an experimental pure deuterium injection discharge. Again, larger and faster fragments are found to lead to higher assimilation with the material assimilation limited to the plasma edge in general, due to the plasmoid drift. The trends of assimilation for varying fragment sizes, speeds and pellet composition qualitatively agree with the previously reported experimental observations.
△ Less
Submitted 13 February, 2025;
originally announced February 2025.
-
Self-consistent full MHD coupling of JOREK and STARWALL for advanced plasma free boundary simulation
Authors:
Raffaele Sparago,
Francisco Javier Artola,
Matthias Hoelzl
Abstract:
An adequate modelling of the electromagnetic interaction of the plasma with the surrounding conductors is paramount for the correct reproduction of 3D plasma dynamics. Simulations of the latter provide in turn useful predictions regarding the plasma evolution, the related MHD modes leading to disruptions and the electromagnetic forces acting on the vacuum vessel's components when said disruptions…
▽ More
An adequate modelling of the electromagnetic interaction of the plasma with the surrounding conductors is paramount for the correct reproduction of 3D plasma dynamics. Simulations of the latter provide in turn useful predictions regarding the plasma evolution, the related MHD modes leading to disruptions and the electromagnetic forces acting on the vacuum vessel's components when said disruptions occur. The latest modelling efforts with the 3D FEM non-linear JOREK code have been directed towards the eddy current coupling of a reduced magnetohydrodynamic (MHD) plasma model with thin and volumetric wall codes (STARWALL and CARIDDI). In this contribution, we present an eddy current coupling between the full MHD model of JOREK and the STARWALL code; this new coupling scheme describes the full three-dimensional interactions of the plasma with the vacuum region and external conductors, modeled by natural boundary conditions linking the magnetic vector potential $\mathbf{A}$ to the magnetic field $\mathbf{B}$. The consistency of the new coupling scheme is validated via benchmarks for axisymmetric Vertical Displacement Events and multi-harmonics simulations of MHD modes.
△ Less
Submitted 10 January, 2025;
originally announced January 2025.
-
Non-linear shattered pellet injection modelling in ASDEX Upgrade
Authors:
W. Tang,
M. Hoelzl,
M. Lehnen,
D. Hu,
F. J. Artola,
P. Halldestam,
P. Heinrich,
S. Jachmich,
E. Nardon,
G. Papp,
A. Patel,
the ASDEX Upgrade Team,
the EUROfusion Tokamak Exploitation Team,
the JOREK Team
Abstract:
Shattered pellet injection (SPI) is selected for the disruption mitigation system in ITER, due to deeper penetration, expected assimilation efficiency and prompt material delivery. This article describes non-linear simulations of SPI in the ASDEX Upgrade tokamak to test the mitigation efficiency of different injection parameters for neon-doped deuterium pellets using the JOREK code. The simulation…
▽ More
Shattered pellet injection (SPI) is selected for the disruption mitigation system in ITER, due to deeper penetration, expected assimilation efficiency and prompt material delivery. This article describes non-linear simulations of SPI in the ASDEX Upgrade tokamak to test the mitigation efficiency of different injection parameters for neon-doped deuterium pellets using the JOREK code. The simulations are executed as fluid simulations. Additional marker particles are used to evolve the charge state distribution of impurities based on OpenADAS atomic data, i.e., no coronal equilibrium assumption is made. Regarding the pellet composition, neon fraction scans from 0 - 10% are performed. Numerical results show that the thermal quench (TQ) occurs in two stages. In the first stage, approximately half of the thermal energy is lost abruptly, primarily through convective and conductive transport in the stochastic fields. This stage is relatively independent of the injection parameters. In the second stage, where the majority of the remaining thermal energy is lost, radiation plays a dominant role. In cases of very low neon content, this second stage may not occur at all. A larger fraction ($\sim $20%) of the total material in the pellet is assimilated in the plasma for low neon fraction pellets (0.12%) since the full thermal collapse of the plasma occurs later than in high neon fraction scenarios. Nevertheless, the total number of assimilated neon atoms increases with increasing neon fraction. The effects of fragment size and penetration speed are further studied. Slower and smaller fragments promote edge cooling and the formation of a cold front. Faster fragments result in shorter TQ duration and higher assimilation as they reach the hotter plasma regions quicker. Using synthetic diagnostics, comparisons of general trend between simulations and experiments are conducted.
△ Less
Submitted 4 December, 2024;
originally announced December 2024.
-
Radiated energy fraction of SPI-induced disruptions at ASDEX Upgrade
Authors:
Paul Heinrich,
Gergely Papp,
Stefan Jachmich,
Javier Artola,
Matthias Bernert,
Pascal de Marné,
Mathias Dibon,
Ralph Dux,
Thomas Eberl,
Jörg Hobirk,
Michael Lehnen,
Tobias Peherstorfer,
Nina Schwarz,
Umar Sheikh,
Bernhard Sieglin,
Jakub Svoboda,
the ASDEX Upgrade Team,
the EUROfusion Tokamak Exploitation Team
Abstract:
Future large tokamaks will operate at high plasma currents and high stored plasma energies. To ensure machine protection in case of a sudden loss of plasma confinement (major disruption), a large fraction of the magnetic and thermal energy must be radiated to reduce thermal loads. The disruption mitigation system for ITER is based on massive material injection in the form of shattered pellet injec…
▽ More
Future large tokamaks will operate at high plasma currents and high stored plasma energies. To ensure machine protection in case of a sudden loss of plasma confinement (major disruption), a large fraction of the magnetic and thermal energy must be radiated to reduce thermal loads. The disruption mitigation system for ITER is based on massive material injection in the form of shattered pellet injection (SPI). To support ITER, a versatile SPI system was installed at the tokamak ASDEX Upgrade (AUG). The AUG SPI features three independent pellet generation cells and guide tubes, and each was equipped with different shatter heads for the 2022 experimental campaign. We dedicated over 200 plasma discharges to the study of SPI plasma termination, and in this manuscript report on the results of bolometry (total radiation) analysis. The amount of neon inside the pellets is the dominant factor determining the radiated energy fraction ($f_{rad}$). Large and fast fragments, produced by the 12.5° rectangular shatter head, lead to somewhat higher values of frad compared to the 25° circular or rectangular heads. This effect is strongest for neon content of $< 3\times10^{20}$ neon atoms ($f_\textrm{neon} \lesssim 1.25\%$ neon) injected, where a lower normal velocity component (larger fragments) seems slightly beneficial. While full-sized, 8 mm diameter, 100% deuterium ($D_2$) pellets lead to a disruption, the 4 mm or shortened 8 mm pellets of 100% $D_2$ did not. The disruption threshold for 100% $D_2$ is found to be around $1\times10^{22}$ $D_2$ molecules inside the pellet. While the radiated energy fraction of non-disruptive SPI is below 20%, this is increased to 40% during the TQ and VDE phase of the disruptive injections. For ($D_2$-Ne-mix pellets, frad values of $< 90$% are observed, and the curve saturates around 80% for 10% neon mixed into the 8 mm pellets ($2\times10^{21}$ neon atoms).
△ Less
Submitted 16 April, 2025; v1 submitted 1 October, 2024;
originally announced October 2024.
-
Runaway electron beam formation, vertical motion, termination and wall loads in EU-DEMO
Authors:
F. Vannini,
V. Bandaru,
H. Bergstroem,
N. Schwarz,
F. J. Artola,
M. Hoelzl,
G. Pautasso,
E. Nardon,
F. Maviglia,
M. L. Richiusa,
E. Emanuelli,
the JOREK team
Abstract:
Runaway electron loads onto material structures are a major concern for future large tokamaks due to the efficient avalanching at high plasma currents. Here, we perform predictive studies using the JOREK code for a plausible plasma configuration in the European DEMO fusion power plant with focus on a pessimistic scenario in which a multi mega-ampere runaway electron beam is formed. The work first…
▽ More
Runaway electron loads onto material structures are a major concern for future large tokamaks due to the efficient avalanching at high plasma currents. Here, we perform predictive studies using the JOREK code for a plausible plasma configuration in the European DEMO fusion power plant with focus on a pessimistic scenario in which a multi mega-ampere runaway electron beam is formed. The work first comprises axisymmetric predictions of runaway electron beam formation in a mitigated scenario and of the simultaneous vertical motion of the beam due to loss of position control. The subsequent runaway electron beam termination triggered by a burst of MHD activity during the course of the vertical motion is then simulated in 3D with the runaway electron fluid self-consistently coupled to the MHD modes. Finally, the resulting deposition pattern of the runaway electrons onto wall structures is calculated with a relativistic test particle approach. This way, the suitability of a possible sacrificial limiter concept for the protection of first wall components is assessed.
△ Less
Submitted 4 July, 2024;
originally announced July 2024.
-
Axisymmetric predictions for mitigated and vertically unstable disruptions in ITER with runaway electrons
Authors:
V. Bandaru,
M. Hoelzl,
F. J. Artola,
M. Lehnen,
JOREK team
Abstract:
We present two-dimensional global simulations of mitigated and vertically unstable disruptions in ITER in the presence of runaway electrons. An elongated plasma in free-boundary equilibrium is subjected to an artificial thermal quench and current-profile flattening, followed by one or more massive material injections and RE avalanche. Scenarios of major disruptions as well as upward and downward v…
▽ More
We present two-dimensional global simulations of mitigated and vertically unstable disruptions in ITER in the presence of runaway electrons. An elongated plasma in free-boundary equilibrium is subjected to an artificial thermal quench and current-profile flattening, followed by one or more massive material injections and RE avalanche. Scenarios of major disruptions as well as upward and downward vertical displacement events are considered. Results provide important insights into the effects of runaway electron formation, post thermal quench current-profile, injection quantities and timings, and impurity flushout on the overall evolution of disruption and the plasma vertical motion thereof. Interplay between the various effects offers scope for potentially beneficial runaway electron mitigation scenarios.
△ Less
Submitted 14 June, 2024;
originally announced June 2024.
-
Plasmoid drift and first wall heat deposition during ITER H-mode dual-SPIs in JOREK simulations
Authors:
D. Hu,
F. J. Artola,
E. Nardon,
M. Lehnen,
M. Kong,
D. Bonfiglio,
M. Hoelzl,
G. T. A. Huijsmans,
JOREK Team
Abstract:
The heat flux mitigation during the Thermal Quench (TQ) by the Shattered Pellet Injection (SPI) is one of the major elements of disruption mitigation strategy for ITER. It's efficiency greatly depends on the SPI and the target plasma, and is ultimately checked by the heat deposition on to the PFCs. To investigate this, JOREK simulations of neon-mixed dual-SPIs into ITER baseline H-mode and a "degr…
▽ More
The heat flux mitigation during the Thermal Quench (TQ) by the Shattered Pellet Injection (SPI) is one of the major elements of disruption mitigation strategy for ITER. It's efficiency greatly depends on the SPI and the target plasma, and is ultimately checked by the heat deposition on to the PFCs. To investigate this, JOREK simulations of neon-mixed dual-SPIs into ITER baseline H-mode and a "degraded H-mode" with and without good injector synchronization are performed with focus on the first wall heat flux and its energy impact. It is found that low neon fraction SPIs into the baseline H-mode plasmas exhibit strong major radial plasmoid drift as the fragments arrive at the pedestal, accompanied by edge stochasticity. Significant density expulsion and outgoing heat flux occurs as a result, reducing the mitigation efficiency. Such drift motion could be mitigated by injecting higher neon fraction pellets', or by considering the pre-disruption confinement degradation, thus improving the radiation fraction. The radiation heat flux is found to peak in the vicinity of the fragment injection location in the early injection phase, while it relaxes later on due to parallel impurity transport. The overall radiation asymmetry could be significantly mitigated by good synchronization. Time integration of the local heat flux is carried out to provide its energy impact for wall heat damage assessment. For the baseline H-mode case with full pellet injection, melting of the stainless steel of the diagnostic port could occur near the injection port, which is acceptable, without any melting of the first wall tungsten tiles. For the degraded H-mode cases with quarter-pellet SPIs, which have 1/4 total volume of a full pellet, the maximum energy impact approaches the tolerable limit of the stainless steel with un-synchronized SPIs, and stays well below such limit for the perfectly synchronized ones.
△ Less
Submitted 7 June, 2024;
originally announced June 2024.
-
Runaway Electron Dynamics in ITER Disruptions with Shattered Pellet Injections
Authors:
Oskar Vallhagen,
Lise Hanebring,
Javier Artola,
Michael Lehnen,
Eric Nardon,
Tünde Fülöp,
Mathias Hoppe,
Sarah Newton,
Istvan Pusztai
Abstract:
This study systematically explores the parameter space of disruption mitigation through shattered pellet injection in ITER with a focus on runaway electron dynamics, using the disruption modelling tool DREAM. The physics fidelity is considerably increased compared to previous studies, by e.g., using realistic magnetic geometry, resistive wall configuration, thermal quench onset criteria, as well a…
▽ More
This study systematically explores the parameter space of disruption mitigation through shattered pellet injection in ITER with a focus on runaway electron dynamics, using the disruption modelling tool DREAM. The physics fidelity is considerably increased compared to previous studies, by e.g., using realistic magnetic geometry, resistive wall configuration, thermal quench onset criteria, as well as including additional effects, such as ion transport and enhanced runaway electron transport during the thermal quench. The work aims to provide a fairly comprehensive coverage of experimentally feasible scenarios, considering plasmas representative of both non-activated and high-performance DT operation, different thermal quench onset criteria and transport levels, a wide range of hydrogen and neon quantities injected in one or two stages, and pellets with various characteristic shard sizes. Using a staggered injection scheme, with a pure hydrogen injection preceding a mixed hydrogen-neon injection, we find injection parameters leading to acceptable runaway electron currents in all investigated discharges without activated runaway sources. Dividing the injection into two stages is found to significantly enhance the assimilation and minimize runaway electron generation due to the hot-tail mechanism. However, while a staggered injection outperforms a single stage injection also in cases with radioactive runaway electron sources, no cases with acceptable runaway electron currents are found for a DT-plasma with a 15 MA plasma current.
△ Less
Submitted 25 January, 2024;
originally announced January 2024.
-
Confinement of passing and trapped runaway electrons in the simulation of an ITER current quench
Authors:
Konsta Särkimäki,
Javier Artola,
Matthias Hoelzl
Abstract:
Runaway electrons (REs) present a high-priority issue for ITER but little is known about the extent to which RE generation is affected by the stochastic field intrinsic to disrupting plasmas. RE generation can be modelled with reduced kinetic models and there has been recent progress in involving losses due to field stochasticity, either via a loss-time parameter or radial transport coefficients w…
▽ More
Runaway electrons (REs) present a high-priority issue for ITER but little is known about the extent to which RE generation is affected by the stochastic field intrinsic to disrupting plasmas. RE generation can be modelled with reduced kinetic models and there has been recent progress in involving losses due to field stochasticity, either via a loss-time parameter or radial transport coefficients which can be estimated by tracing test electrons in 3D fields. We evaluate these terms in ITER using a recent JOREK 3D MHD simulation of plasma disruption to provide the stochastic magnetic fields where RE markers are traced with the built-in particle tracing module. While the MHD simulation modelled only the current quench phase, the case is MHD unstable and exhibits similar relaxation as would be expected during the thermal quench. Therefore, the RE simulations can be considered beginning right after the thermal quench but before the MHD relaxation is complete. The plasma is found to become fully stochastic for 8 ms and the resulting transport is sufficient to overcome RE avalanche before flux surfaces are reformed. We also study transport mechanisms for trapped REs and find those to be deconfined as well during this phase. While the results presented here are not sufficient to assess the magnitude of the formed RE beam, we show that significant RE losses could be expected to arise due to field stochasticity.
△ Less
Submitted 17 March, 2022;
originally announced March 2022.
-
Complete 3D MHD simulations of the current quench phase of ITER mitigated disruptions
Authors:
F. J. Artola,
A. Loarte,
M. Hoelzl,
M. Lehnen,
N. Schwarz,
the JOREK team
Abstract:
Complete 3D simulations of the current quench phase of ITER disruptions are key to predict asymmetric forces acting into the ITER wall. We present for the first time such simulations for ITER mitigated disruptions at realistic Lundquist numbers. For these strongly mitigated disruptions, we find that the edge safety factor remains above 2 and the maximal integral horizontal forces remain below 1 MN…
▽ More
Complete 3D simulations of the current quench phase of ITER disruptions are key to predict asymmetric forces acting into the ITER wall. We present for the first time such simulations for ITER mitigated disruptions at realistic Lundquist numbers. For these strongly mitigated disruptions, we find that the edge safety factor remains above 2 and the maximal integral horizontal forces remain below 1 MN. The maximal integral vertical force is found to be 13 MN and arises in a time scale given by the resistive wall time as expected from theoretical considerations. In this respect, the vertical force arises after the plasma current has completely decayed, showing the importance of continuing the simulations also in the absence of plasma current. We conclude that the horizontal wall force rotation is not a concern for these strongly mitigated disruptions in ITER, since when the wall forces form, there are no remaining sources of rotation.
△ Less
Submitted 10 December, 2021;
originally announced December 2021.
-
Simulations of COMPASS Vertical Displacement Events with a self-consistent model for halo currents including neutrals and sheath boundary conditions
Authors:
F. J. Artola,
A. Loarte,
E. Matveeva,
J. Havlicek,
T. Markovic,
J. Adamek,
J. Cavalier,
L. Kripner,
G. T. A. Huijsmans,
M. Lehnen,
M. Hoelzl,
R. Panek,
COMPASS team,
JOREK team
Abstract:
The understanding of the halo current properties during disruptions is key to design and operate large scale tokamaks in view of the large thermal and electromagnetic loads that they entail. For the first time, we present a fully self-consistent model for halo current simulations including neutral particles and sheath boundary conditions. The model is used to simulate Vertical Displacement Events…
▽ More
The understanding of the halo current properties during disruptions is key to design and operate large scale tokamaks in view of the large thermal and electromagnetic loads that they entail. For the first time, we present a fully self-consistent model for halo current simulations including neutral particles and sheath boundary conditions. The model is used to simulate Vertical Displacement Events (VDEs) occurring in the COMPASS tokamak. Recent COMPASS experiments have shown that the parallel halo current density at the plasma-wall interface is limited by the ion saturation current during VDE-induced disruptions. We show that usual MHD boundary conditions can lead to the violation of this physical limit and we implement this current density limitation through a boundary condition for the electrostatic potential. Sheath boundary conditions for the density, the heat flux, the parallel velocity and a realistic parameter choice (e.g. Spitzer $η$ and Spitzer-Härm $χ_\parallel$ values) extend present VDE simulations beyond the state of the art. Experimental measurements of the current density, temperature and heat flux profiles at the COMPASS divertor are compared with the results obtained from axisymmetric simulations. Since the ion saturation current density ($J_{sat}$) is shown to be essential to determine the halo current profile, parametric scans are performed to study its dependence on different quantities such as the plasma resistivity and the particle and heat diffusion coefficients. In this respect, the plasma resistivity in the halo region broadens significantly the $J_{sat}$ profile, increasing the halo width at a similar total halo current.
△ Less
Submitted 5 January, 2021;
originally announced January 2021.
-
3D simulations of vertical displacement events in tokamaks: A benchmark of M3D-C$^1$, NIMROD and JOREK
Authors:
F. J. Artola,
C. R. Sovinec,
S. C. Jardin,
M. Hoelzl,
I. Krebs,
C. Clauser
Abstract:
In recent years, the nonlinear 3D magnetohydrodynamic codes JOREK, M3D-C$^1$ and NIMROD developed the capability of modelling realistic 3D vertical displacement events (VDEs) including resistive walls. In this paper, a comprehensive 3D VDE benchmark is presented between these state of the art codes. The simulated case is based on an experimental NSTX plasma but with a simplified rectangular wall.…
▽ More
In recent years, the nonlinear 3D magnetohydrodynamic codes JOREK, M3D-C$^1$ and NIMROD developed the capability of modelling realistic 3D vertical displacement events (VDEs) including resistive walls. In this paper, a comprehensive 3D VDE benchmark is presented between these state of the art codes. The simulated case is based on an experimental NSTX plasma but with a simplified rectangular wall. In spite of pronounced differences between physics models and numerical methods, the comparison shows very good agreement in the relevant quantities used to characterize disruptions such as the 3D wall forces and energy decay. This benchmark does not only bring confidence regarding the use of the mentioned codes for disruption studies, but also shows differences with respect to the used models (e.g. reduced versus full MHD models). The simulations show important 3D features for a NSTX plasma such as the self-consistent evolution of the halo current and the origin of the wall forces. In contrast to other reduced MHD models based on an ordering in the aspect ratio, the ansatz based JOREK reduced MHD model allows capturing the 3D dynamics even in the spherical tokamak limit considered here.
△ Less
Submitted 9 November, 2020;
originally announced November 2020.
-
Understanding the reduction of the edge safety factor during hot VDEs and fast edge cooling events
Authors:
F. J. Artola,
K. Lackner,
G. T. A. Huijsmans,
M. Hoelzl,
E. Nardon,
A. Loarte
Abstract:
In the present work a simple analytical approach is presented in order to clarify the physics behind the edge current density behaviour of a hot plasma entering in contact with a resistive conductor. When a plasma enters in contact with a highly resistive wall, large current densities appear at the edge of the plasma. The model shows that this edge current originates from the plasma response, whic…
▽ More
In the present work a simple analytical approach is presented in order to clarify the physics behind the edge current density behaviour of a hot plasma entering in contact with a resistive conductor. When a plasma enters in contact with a highly resistive wall, large current densities appear at the edge of the plasma. The model shows that this edge current originates from the plasma response, which attempts to conserve the poloidal magnetic flux ($Ψ$) when the outer current is being lost. The loss of outer current is caused by the high resistance of the outer current path compared to the plasma core resistance. The resistance of the outer path may be given by plasma contact with a very resistive structure or by a sudden decrease of the outer plasma temperature (e.g. due to a partial thermal quench or due to a cold front penetration caused by massive gas injection). For general plasma geometries and current density profiles the model shows that given a small change of minor radius ($δa$) the plasma current is conserved to first order ($δI_p = 0 + \mathcal{O}(δa^2)$). This conservation comes from the fact that total inductance remains constant ($δL = 0$) due to an exact compensation of the change of external inductance with the change of internal inductance ($δL_\text{ext}+δL_\text{int} = 0$). As the total current is conserved and the plasma volume is reduced, the edge safety factor drops according to $q_a \propto a^2/I_p$. Finally the consistency of the resulting analytical predictions is checked with the help of free-boundary MHD simulations.
△ Less
Submitted 9 March, 2020;
originally announced March 2020.
-
Axisymmetric simulations of vertical displacement events in tokamaks: A benchmark of M3D-C$^1$, NIMROD and JOREK
Authors:
I. Krebs,
F. J. Artola,
C. R. Sovinec,
S. C. Jardin,
K. J. Bunkers,
M. Hoelzl,
N. M. Ferraro
Abstract:
A benchmark exercise for the modeling of vertical displacement events (VDEs) is presented and applied to the 3D nonlinear magneto-hydrodynamic codes M3D-C$^1$, JOREK and NIMROD. The simulations are based on a vertically unstable NSTX equilibrium enclosed by an axisymmetric resistive wall with rectangular cross section. A linear dependence of the linear VDE growth rates on the resistivity of the wa…
▽ More
A benchmark exercise for the modeling of vertical displacement events (VDEs) is presented and applied to the 3D nonlinear magneto-hydrodynamic codes M3D-C$^1$, JOREK and NIMROD. The simulations are based on a vertically unstable NSTX equilibrium enclosed by an axisymmetric resistive wall with rectangular cross section. A linear dependence of the linear VDE growth rates on the resistivity of the wall is recovered for sufficiently large wall conductivity and small temperatures in the open field line region. The benchmark results show good agreement between the VDE growth rates obtained from linear NIMROD and M3D-C$^1$ simulations as well as from the linear phase of axisymmetric nonlinear JOREK, NIMROD and M3D-C$^1$ simulations. Axisymmetric nonlinear simulations of a full VDE performed with the three codes are compared and excellent agreement is found regarding plasma location and plasma currents as well as eddy and halo currents in the wall.
△ Less
Submitted 19 August, 2019; v1 submitted 6 August, 2019;
originally announced August 2019.
-
Simulating the nonlinear interaction of relativistic electrons and tokamak plasma instabilities: Implementation and validation of a fluid model
Authors:
V. Bandaru,
M. Hoelzl,
F. J. Artola,
G. Papp,
G. T. A. Huijsmans
Abstract:
For the simulation of disruptions in tokamak fusion plasmas, a fluid model describing the evolution of relativistic runaway electrons and their interaction with the background plasma is presented. The overall aim of the model is to self-consistently describe the nonlinear coupled evolution of runaway electrons (REs) and plasma instabilities during disruptions. In this model, the runaway electrons…
▽ More
For the simulation of disruptions in tokamak fusion plasmas, a fluid model describing the evolution of relativistic runaway electrons and their interaction with the background plasma is presented. The overall aim of the model is to self-consistently describe the nonlinear coupled evolution of runaway electrons (REs) and plasma instabilities during disruptions. In this model, the runaway electrons are considered as a separate fluid species in which the initial seed is generated through the Dreicer source, which eventually grows by the avalanche mechanism (further relevant source mechanisms can easily be added). Advection of the runaway electrons is considered primarily along field lines, but also taking into account the ExB drift. The model is implemented in the nonlinear magnetohydrodynamic (MHD) code JOREK based on Bezier finite elements, with current coupling to the thermal plasma. Benchmarking of the code with the one-dimensional runaway electron code GO is done using an artificial thermal quench on a circular plasma. As a first demonstration, the code is applied to the problem of an axisymmetric cold vertical displacement event in an ITER plasma, revealing significantly different dynamics between cases computed with and without runaway electrons. Though it is not yet feasible to achieve fully realistic runaway electron velocities close to the speed of light in complete simulations of slowly evolving plasma instabilities, the code is demonstrated to be suitable to study various kinds of MHD-RE interactions in MHD-active and disruption relevant plasmas.
△ Less
Submitted 28 June, 2019;
originally announced June 2019.
