Showing 1–19 of 19 results for author: Araki, S

Input optics systems of the KAGRA detector during O3GK

Authors: T. Akutsu, M. Ando, K. Arai, Y. Arai, S. Araki, A. Araya, N. Aritomi, H. Asada, Y. Aso, S. Bae, Y. Bae, L. Baiotti, R. Bajpai, M. A. Barton, K. Cannon, Z. Cao, E. Capocasa, M. Chan, C. Chen, K. Chen, Y. Chen, C-I. Chiang, H. Chu, Y-K. Chu, S. Eguchi , et al. (228 additional authors not shown)

Abstract: KAGRA, the underground and cryogenic gravitational-wave detector, was operated for its solo observation from February 25th to March 10th, 2020, and its first joint observation with the GEO 600 detector from April 7th -- 21st, 2020 (O3GK). This study presents an overview of the input optics systems of the KAGRA detector, which consist of various optical systems, such as a laser source, its intensit… ▽ More KAGRA, the underground and cryogenic gravitational-wave detector, was operated for its solo observation from February 25th to March 10th, 2020, and its first joint observation with the GEO 600 detector from April 7th -- 21st, 2020 (O3GK). This study presents an overview of the input optics systems of the KAGRA detector, which consist of various optical systems, such as a laser source, its intensity and frequency stabilization systems, modulators, a Faraday isolator, mode-matching telescopes, and a high-power beam dump. These optics were successfully delivered to the KAGRA interferometer and operated stably during the observations. The laser frequency noise was observed to limit the detector sensitivity above a few kHz, whereas the laser intensity did not significantly limit the detector sensitivity. △ Less

Submitted 12 October, 2022; originally announced October 2022.

An Unstructured Mesh Approach to Nonlinear Noise Reduction for Coupled Systems

Authors: Aaron Kirtland, Jonah Botvinick-Greenhouse, Marianne DeBrito, Megan Osborne, Casey Johnson, Robert S. Martin, Samuel J. Araki, Daniel Q. Eckhardt

Abstract: To address noise inherent in electronic data acquisition systems and real world sources, Araki et al. [Physica D: Nonlinear Phenomena, 417 (2021) 132819] demonstrated a grid based nonlinear technique to remove noise from a chaotic signal, leveraging a clean high-fidelity signal from the same dynamical system and ensemble averaging in multidimensional phase space. This method achieved denoising of… ▽ More To address noise inherent in electronic data acquisition systems and real world sources, Araki et al. [Physica D: Nonlinear Phenomena, 417 (2021) 132819] demonstrated a grid based nonlinear technique to remove noise from a chaotic signal, leveraging a clean high-fidelity signal from the same dynamical system and ensemble averaging in multidimensional phase space. This method achieved denoising of a time-series data with 100% added noise but suffered in regions of low data density. To improve this grid-based method, here an unstructured mesh based on triangulations and Voronoi diagrams is used to accomplish the same task. The unstructured mesh more uniformly distributes data samples over mesh cells to improve the accuracy of the reconstructed signal. By empirically balancing bias and variance errors in selecting the number of unstructured cells as a function of the number of available samples, the method achieves asymptotic statistical convergence with known test data and reduces synthetic noise on experimental signals from Hall Effect Thrusters (HETs) with greater success than the original grid-based strategy. △ Less

Submitted 7 September, 2022; originally announced September 2022.

Tailoring collective motion of kinesin-driven microtubules via topographic landscapes

Authors: Shunya Araki, Kazusa Beppu, Arif Md. Rashedul Kabir, Akira Kakugo, Yusuke T. Maeda

Abstract: Biomolecular motor proteins that generate forces by consuming chemical energy obtained from ATP hydrolysis are pivotal for organizing broad cytoskeletal structures in living cells. The control of such cytoskeletal structures benefits programmable protein patterning; however, our current knowledge is limited owing to the underdevelopment of an engineering approach for controlling pattern formation.… ▽ More Biomolecular motor proteins that generate forces by consuming chemical energy obtained from ATP hydrolysis are pivotal for organizing broad cytoskeletal structures in living cells. The control of such cytoskeletal structures benefits programmable protein patterning; however, our current knowledge is limited owing to the underdevelopment of an engineering approach for controlling pattern formation. Here, we demonstrate the tailoring of assembled patterns of microtubules (MTs) driven by kinesin motors by designing the boundary shape in fabricated microwells. We found an MT bundle structure along the microwell wall and a bridging structure perpendicular to the wall. Corroborated by the theory of self-propelled rods, we further showed that the alignment of MTs defined by the boundary shape determined the transition of the assembled patterns, providing a blueprint to reconstruct bridge structures in microchannels. Our findings provide a geometric rule to tailor the self-organization of cytoskeletons and motor proteins for nanotechnological applications. △ Less

Submitted 12 October, 2021; originally announced October 2021.

Comments: 19 pages, 4 figures, and supporting information 13 pages

Journal ref: Nano Letters 21, 10478-10485 (2021)

Cryogenic suspension design for a kilometer-scale gravitational-wave detector

Authors: Takafumi Ushiba, Tomotada Akutsu, Yoichi Aso, Sakae Araki, Rishabh Bajpai, Dan Chen, Kieran Craig, William Creus, Yutaro Enomoto, Yoshinori Fujii, Masashi Fukunaga, Ayako Hagiwara, Sadakazu Haino, Kunihiko Hasegawa, Yuki Inoue, Kiwamu Izumi, Nobuhiro Kimura, Keiko Kokeyama, Rahul Kumar, Ettore Majorana, Yuta Michimura, Takahiro Miyamoto, Shinji Miyoki, Iwao Murakami, Yoshikazu Namai , et al. (21 additional authors not shown)

Abstract: We report the mirror suspension design for Large-scale Cryogenic Gravitational wave Telescope, KAGRA, during bKAGRA Phase 1. Mirror thermal noise is one of the fundamental noises for room-temperature gravitational-wave detectors such as Advanced LIGO and Advanced Virgo. Thus, reduction of thermal noise is required for further improvement of their sensitivity. One effective approach for reducing th… ▽ More We report the mirror suspension design for Large-scale Cryogenic Gravitational wave Telescope, KAGRA, during bKAGRA Phase 1. Mirror thermal noise is one of the fundamental noises for room-temperature gravitational-wave detectors such as Advanced LIGO and Advanced Virgo. Thus, reduction of thermal noise is required for further improvement of their sensitivity. One effective approach for reducing thermal noise is to cool the mirrors. There are many technical challenges that must be overcome to cool the mirrors, such as cryocooler induced vibrations, thermal drift in suspensions, and reduction in duty cycling due to the increased number of potential failure mechanisms. Our mirror suspension has a black coating that makes radiative cooling more efficient. For conduction cooling, we developed ultra high purity aluminum heat links, which yield high thermal conductivity while keeping the spring constant sufficiently small. A unique inclination adjustment system, called moving mass, is used for aligning the mirror orientation in pitch. Photo-reflective displacement sensors, which have a large range, are installed for damping control on marionette recoil mass and intermediate recoil mass. Samarium cobalt magnets are used for coil-magnet actuators to prevent significant change of magnetism between room temperature and cryogenic temperature. In this paper, the design of our first cryogenic payload and its performance during bKAGRA Phase 1 are discussed. △ Less

Submitted 25 January, 2021; v1 submitted 5 October, 2020; originally announced October 2020.

Comments: 18 pages, 9 figures

Journal ref: Class. Quantum Grav. 38 085013 (2021)

Overview of KAGRA: Detector design and construction history

Authors: T. Akutsu, M. Ando, K. Arai, Y. Arai, S. Araki, A. Araya, N. Aritomi, Y. Aso, S. -W. Bae, Y. -B. Bae, L. Baiotti, R. Bajpai, M. A. Barton, K. Cannon, E. Capocasa, M. -L. Chan, C. -S. Chen, K. -H. Chen, Y. -R. Chen, H. -Y. Chu, Y-K. Chu, S. Eguchi, Y. Enomoto, R. Flaminio, Y. Fujii , et al. (175 additional authors not shown)

Abstract: KAGRA is a newly built gravitational-wave telescope, a laser interferometer comprising arms with a length of 3\,km, located in Kamioka, Gifu, Japan. KAGRA was constructed under the ground and it is operated using cryogenic mirrors that help in reducing the seismic and thermal noise. Both technologies are expected to provide directions for the future of gravitational-wave telescopes. In 2019, KAGRA… ▽ More KAGRA is a newly built gravitational-wave telescope, a laser interferometer comprising arms with a length of 3\,km, located in Kamioka, Gifu, Japan. KAGRA was constructed under the ground and it is operated using cryogenic mirrors that help in reducing the seismic and thermal noise. Both technologies are expected to provide directions for the future of gravitational-wave telescopes. In 2019, KAGRA finished all installations with the designed configuration, which we call the baseline KAGRA. In this occasion, we present an overview of the baseline KAGRA from various viewpoints in a series of of articles. In this article, we introduce the design configurations of KAGRA with its historical background. △ Less

Submitted 2 July, 2020; v1 submitted 12 May, 2020; originally announced May 2020.

Comments: 33 pages, 10 figures

An arm length stabilization system for KAGRA and future gravitational-wave detectors

Authors: T. Akutsu, M. Ando, K. Arai, K. Arai, Y. Arai, S. Araki, A. Araya, N. Aritomi, Y. Aso, S. Bae, Y. Bae, L. Baiotti, R. Bajpai, M. A. Barton, K. Cannon, E. Capocasa, M. Chan, C. Chen, K. Chen, Y. Chen, H. Chu, Y-K. Chu, K. Doi, S. Eguchi, Y. Enomoto , et al. (181 additional authors not shown)

Abstract: Modern ground-based gravitational wave (GW) detectors require a complex interferometer configuration with multiple coupled optical cavities. Since achieving the resonances of the arm cavities is the most challenging among the lock acquisition processes, the scheme called arm length stabilization (ALS) had been employed for lock acquisition of the arm cavities. We designed a new type of the ALS, wh… ▽ More Modern ground-based gravitational wave (GW) detectors require a complex interferometer configuration with multiple coupled optical cavities. Since achieving the resonances of the arm cavities is the most challenging among the lock acquisition processes, the scheme called arm length stabilization (ALS) had been employed for lock acquisition of the arm cavities. We designed a new type of the ALS, which is compatible with the interferometers having long arms like the next generation GW detectors. The features of the new ALS are that the control configuration is simpler than those of previous ones and that it is not necessary to lay optical fibers for the ALS along the kilometer-long arms of the detector. Along with simulations of its noise performance, an experimental test of the new ALS was performed utilizing a single arm cavity of KAGRA. This paper presents the first results of the test where we demonstrated that lock acquisition of the arm cavity was achieved using the new ALS and residual noise was measured to be $8.2\,\mathrm{Hz}$ in units of frequency, which is smaller than the linewidth of the arm cavity and thus low enough to lock the full interferometer of KAGRA in a repeatable and reliable manner. △ Less

Submitted 28 November, 2019; v1 submitted 2 October, 2019; originally announced October 2019.

Comments: 21 pages, 8figures

Journal ref: Class. Quantum Grav. 37 (2020) 035004

First cryogenic test operation of underground km-scale gravitational-wave observatory KAGRA

Authors: KAGRA Collaboration, T. Akutsu, M. Ando, K. Arai, Y. Arai, S. Araki, A. Araya, N. Aritomi, H. Asada, Y. Aso, S. Atsuta, K. Awai, S. Bae, L. Baiotti, M. A. Barton, K. Cannon, E. Capocasa, C-S. Chen, T-W. Chiu, K. Cho, Y-K. Chu, K. Craig, W. Creus, K. Doi, K. Eda , et al. (179 additional authors not shown)

Abstract: KAGRA is a second-generation interferometric gravitational-wave detector with 3-km arms constructed at Kamioka, Gifu in Japan. It is now in its final installation phase, which we call bKAGRA (baseline KAGRA), with scientific observations expected to begin in late 2019. One of the advantages of KAGRA is its underground location of at least 200 m below the ground surface, which brings small seismic… ▽ More KAGRA is a second-generation interferometric gravitational-wave detector with 3-km arms constructed at Kamioka, Gifu in Japan. It is now in its final installation phase, which we call bKAGRA (baseline KAGRA), with scientific observations expected to begin in late 2019. One of the advantages of KAGRA is its underground location of at least 200 m below the ground surface, which brings small seismic motion at low frequencies and high stability of the detector. Another advantage is that it cools down the sapphire test mass mirrors to cryogenic temperatures to reduce thermal noise. In April-May 2018, we have operated a 3-km Michelson interferometer with a cryogenic test mass for 10 days, which was the first time that km-scale interferometer was operated at cryogenic temperatures. In this article, we report the results of this "bKAGRA Phase 1" operation. We have demonstrated the feasibility of 3-km interferometer alignment and control with cryogenic mirrors. △ Less

Submitted 11 January, 2019; originally announced January 2019.

Comments: 23 pages, 11 figures

Report number: JGW-P1809289

Journal ref: Classical and Quantum Gravity 36, 165008 (2019)

Vibration isolation system with a compact damping system for power recycling mirrors of KAGRA

Authors: Y. Akiyama, T. Akutsu, M. Ando, K. Arai, Y. Arai, S. Araki, A. Araya, N. Aritomi, H. Asada, Y. Aso, S. Bae, L. Baiotti, M. A. Barton, K. Cannon, E. Capocasa, C-S. Chen, T-W. Chiu, K. Cho, Y-K. Chu, K. Craig, V. Dattilo, K. Doi, Y. Enomoto, R. Flaminio, Y. Fujii , et al. (149 additional authors not shown)

Abstract: A vibration isolation system called Type-Bp system used for power recycling mirrors has been developed for KAGRA, the interferometric gravitational-wave observatory in Japan. A suspension of the Type-Bp system passively isolates an optic from seismic vibration using three main pendulum stages equipped with two vertical vibration isolation systems. A compact reaction mass around each of the main st… ▽ More A vibration isolation system called Type-Bp system used for power recycling mirrors has been developed for KAGRA, the interferometric gravitational-wave observatory in Japan. A suspension of the Type-Bp system passively isolates an optic from seismic vibration using three main pendulum stages equipped with two vertical vibration isolation systems. A compact reaction mass around each of the main stages allows for achieving sufficient damping performance with a simple feedback as well as vibration isolation ratio. Three Type-Bp systems were installed in KAGRA, and were proved to satisfy the requirements on the damping performance, and also on estimated residual displacement of the optics. △ Less

Submitted 10 January, 2019; originally announced January 2019.

KAGRA: 2.5 Generation Interferometric Gravitational Wave Detector

Authors: T. Akutsu, M. Ando, K. Arai, Y. Arai, S. Araki, A. Araya, N. Aritomi, H. Asada, Y. Aso, S. Atsuta, K. Awai, S. Bae, L. Baiotti, M. A. Barton, K. Cannon, E. Capocasa, C-S. Chen, T-W. Chiu, K. Cho, Y-K. Chu, K. Craig, W. Creus, K. Doi, K. Eda, Y. Enomoto , et al. (169 additional authors not shown)

Abstract: The recent detections of gravitational waves (GWs) reported by LIGO/Virgo collaborations have made significant impact on physics and astronomy. A global network of GW detectors will play a key role to solve the unknown nature of the sources in coordinated observations with astronomical telescopes and detectors. Here we introduce KAGRA (former name LCGT; Large-scale Cryogenic Gravitational wave Tel… ▽ More The recent detections of gravitational waves (GWs) reported by LIGO/Virgo collaborations have made significant impact on physics and astronomy. A global network of GW detectors will play a key role to solve the unknown nature of the sources in coordinated observations with astronomical telescopes and detectors. Here we introduce KAGRA (former name LCGT; Large-scale Cryogenic Gravitational wave Telescope), a new GW detector with two 3-km baseline arms arranged in the shape of an "L", located inside the Mt. Ikenoyama, Kamioka, Gifu, Japan. KAGRA's design is similar to those of the second generations such as Advanced LIGO/Virgo, but it will be operating at the cryogenic temperature with sapphire mirrors. This low temperature feature is advantageous for improving the sensitivity around 100 Hz and is considered as an important feature for the third generation GW detector concept (e.g. Einstein Telescope of Europe or Cosmic Explorer of USA). Hence, KAGRA is often called as a 2.5 generation GW detector based on laser interferometry. The installation and commissioning of KAGRA is underway and its cryogenic systems have been successfully tested in May, 2018. KAGRA's first observation run is scheduled in late 2019, aiming to join the third observation run (O3) of the advanced LIGO/Virgo network. In this work, we describe a brief history of KAGRA and highlights of main feature. We also discuss the prospects of GW observation with KAGRA in the era of O3. When operating along with the existing GW detectors, KAGRA will be helpful to locate a GW source more accurately and to determine the source parameters with higher precision, providing information for follow-up observations of a GW trigger candidate. △ Less

Submitted 20 November, 2018; originally announced November 2018.

Comments: 6 pages, 3 figures (quality of some figures has been reduced)

Report number: JGW-P1809243

Journal ref: Nature Astronomy 3, 35 (2019)

Construction of KAGRA: an Underground Gravitational Wave Observatory

Authors: T. Akutsu, M. Ando, S. Araki, A. Araya, T. Arima, N. Aritomi, H. Asada, Y. Aso, S. Atsuta, K. Awai, L. Baiotti, M. A. Barton, D. Chen, K. Cho, K. Craig, R. DeSalvo, K. Doi, K. Eda, Y. Enomoto, R. Flaminio, S. Fujibayashi, Y. Fujii, M. -K. Fujimoto, M. Fukushima, T. Furuhata , et al. (202 additional authors not shown)

Abstract: Major construction and initial-phase operation of a second-generation gravitational-wave detector KAGRA has been completed. The entire 3-km detector is installed underground in a mine in order to be isolated from background seismic vibrations on the surface. This allows us to achieve a good sensitivity at low frequencies and high stability of the detector. Bare-bones equipment for the interferomet… ▽ More Major construction and initial-phase operation of a second-generation gravitational-wave detector KAGRA has been completed. The entire 3-km detector is installed underground in a mine in order to be isolated from background seismic vibrations on the surface. This allows us to achieve a good sensitivity at low frequencies and high stability of the detector. Bare-bones equipment for the interferometer operation has been installed and the first test run was accomplished in March and April of 2016 with a rather simple configuration. The initial configuration of KAGRA is named {\it iKAGRA}. In this paper, we summarize the construction of KAGRA, including the study of the advantages and challenges of building an underground detector and the operation of the iKAGRA interferometer together with the geophysics interferometer that has been constructed in the same tunnel. △ Less

Submitted 11 December, 2017; v1 submitted 30 November, 2017; originally announced December 2017.

Comments: Resolution of some figures has been decreased from its original version submitted to a journal

Journal ref: Progress of Theoretical and Experimental Physics, Vol 2018, 1, 013F01

Development of optical resonant cavities for laser-Compton scattering

Authors: T. Akagi, S. Araki, Y. Honda, A. Kosuge, T. Omori, H. Shimizu, N. Terunuma, J. Urakawa, T. Takahashi, R. Tanaka, Y. Uesugi, H. Yoshitama, Y. Hosaka, K. Sakaue, M. Washio

Abstract: We have been developing optical resonant cavities for laser-Compton scattering experiment at the Accelerator Test Facility in KEK. The main subject of the R&D is to increase laser pulse energy by coherently accumulating the pulses in an optical resonant cavity. We report previous results, current status and future prospects, including a new idea of an optical resonant cavity. We have been developing optical resonant cavities for laser-Compton scattering experiment at the Accelerator Test Facility in KEK. The main subject of the R&D is to increase laser pulse energy by coherently accumulating the pulses in an optical resonant cavity. We report previous results, current status and future prospects, including a new idea of an optical resonant cavity. △ Less

Submitted 15 March, 2017; originally announced March 2017.

Comments: 8 pages, 5 figures. Proceedings of the 7th International Conference "Charged & Neutral Particles Channeling Phenomena Channeling 2016"

Observation of the Stimulated Coherent Diffraction Radiation in an Open Resonator at LUCX Facility

Authors: A. Aryshev, S. Araki, M. Fukuda, N. Terunuma, J. Urakawa, P. Karataev, G. Naumenko, A. Potylitsyn, L. Sukhikh, D. Verigin, K. Sakaue

Abstract: We present an initial test of a new type of a pre-bunched beam pumped free electron maser based on Stimulated Coherent Diffraction Radiation (SCDR) generated in an open resonator. An ultra-fast Schottky Barrier Diode (time response $<1\,$ns) has enabled to investigate the properties of the radiation stored in the cavity as well as the intrinsic properties of the cavity itself. We observed a turn-b… ▽ More We present an initial test of a new type of a pre-bunched beam pumped free electron maser based on Stimulated Coherent Diffraction Radiation (SCDR) generated in an open resonator. An ultra-fast Schottky Barrier Diode (time response $<1\,$ns) has enabled to investigate the properties of the radiation stored in the cavity as well as the intrinsic properties of the cavity itself. We observed a turn-by-turn SCDR generated by a multibunch beam. When the cavity length was exactly a half of the bunch spacing a clear resonance was observed. Moreover, turn-by-turn measurements revealed the cavity quality factor of $72.88$, which was rather high for an open resonator in the wavelength range of $3-5\,$mm. An exponential growth of the photon intensity as a function of the number of bunches was also demonstrated. △ Less

Submitted 29 October, 2013; originally announced October 2013.

Present status and first results of the final focus beam line at the KEK Accelerator Test Facility

Authors: P. Bambade, M. Alabau Pons, J. Amann, D. Angal-Kalinin, R. Apsimon, S. Araki, A. Aryshev, S. Bai, P. Bellomo, D. Bett, G. Blair, B. Bolzon, S. Boogert, G. Boorman, P. N. Burrows, G. Christian, P. Coe, B. Constance, Jean-Pierre Delahaye, L. Deacon, E. Elsen, A. Faus-Golfe, M. Fukuda, J. Gao, N. Geffroy , et al. (69 additional authors not shown)

Abstract: ATF2 is a final-focus test beam line which aims to focus the low emittance beam from the ATF damping ring to a vertical size of about 37 nm and to demonstrate nanometer level beam stability. Several advanced beam diagnostics and feedback tools are used. In December 2008, construction and installation were completed and beam commissioning started, supported by an international team of Asian, Europe… ▽ More ATF2 is a final-focus test beam line which aims to focus the low emittance beam from the ATF damping ring to a vertical size of about 37 nm and to demonstrate nanometer level beam stability. Several advanced beam diagnostics and feedback tools are used. In December 2008, construction and installation were completed and beam commissioning started, supported by an international team of Asian, European, and U.S. scientists. The present status and first results are described. △ Less

Submitted 5 July, 2012; originally announced July 2012.

Comments: 10 pp

Report number: FERMILAB-PUB-10-290-AD

Journal ref: Phys.Rev.ST Accel.Beams 13 (2010) 042801

Production of gamma rays by pulsed laser beam Compton scattering off GeV-electrons using a non-planar four-mirror optical cavity

Authors: T. Akagi, S. Araki, J. Bonis, I. Chaikovska, R. Chiche, R. Cizeron, M. Cohen, E. Cormier, P. Cornebise, N. Delerue, R. Flaminio, S. Funahashi, D. Jehanno, Y. Honda, F. Labaye, M. Lacroix, R. Marie, C. Michel, S. Miyoshi, S. Nagata, T. Omori, Y. Peinaud, L. Pinard, H. Shimizu, V. Soskov , et al. (6 additional authors not shown)

Abstract: As part of the positron source R&D for future $e^+-e^-$ colliders and Compton based compact light sources, a high finesse non-planar four-mirror Fabry-Perot cavity has recently been installed at the ATF (KEK, Tsukuba, Japan). The first measurements of the gamma ray flux produced with a such cavity using a pulsed laser is presented here. We demonstrate the production of a flux of 2.7 $\pm$ 0.2 gamm… ▽ More As part of the positron source R&D for future $e^+-e^-$ colliders and Compton based compact light sources, a high finesse non-planar four-mirror Fabry-Perot cavity has recently been installed at the ATF (KEK, Tsukuba, Japan). The first measurements of the gamma ray flux produced with a such cavity using a pulsed laser is presented here. We demonstrate the production of a flux of 2.7 $\pm$ 0.2 gamma rays per bunch crossing ($\sim3\times10^6$ gammas per second) during the commissioning. △ Less

Submitted 4 January, 2012; v1 submitted 24 November, 2011; originally announced November 2011.

High flux polarized gamma rays production: first measurements with a four-mirror cavity at the ATF

Authors: Nicolas Delerue, J. Bonis, Iryna Chaikovska, R. Chiche, R. Cizeron, M. Cohen, J. Colin, P. Cornebise, D. Jehanno, F. Labaye, M. Lacroix, R. Marie, Y. Peinaud, V. Soskov, A. Variola, F. Zomer, E. Cormier, R. Flaminio, L. Pinard, S. Araki, S. Funahashi, Y. Honda, T. Omori, H. Shimizu, T. Terunuma , et al. (5 additional authors not shown)

Abstract: The next generation of e+/e- colliders will require a very intense flux of gamma rays to allow high current polarized positrons to be produced. This can be achieved by converting polarized high energy photons in polarized pairs into a target. In that context, an optical system consisting of a laser and a four-mirror passive Fabry-Perot cavity has recently been installed at the Accelerator Test Fac… ▽ More The next generation of e+/e- colliders will require a very intense flux of gamma rays to allow high current polarized positrons to be produced. This can be achieved by converting polarized high energy photons in polarized pairs into a target. In that context, an optical system consisting of a laser and a four-mirror passive Fabry-Perot cavity has recently been installed at the Accelerator Test Facility (ATF) at KEK to produce a high flux of polarized gamma rays by inverse Compton scattering. In this contribution, we describe the experimental system and present preliminary results. An ultra-stable four-mirror non planar geometry has been implemented to ensure the polarization of the gamma rays produced. A fiber amplifier is used to inject about 10W in the high finesse cavity with a gain of 1000. A digital feedback system is used to keep the cavity at the length required for the optimal power enhancement. Preliminary measurements show that a flux of about $4\times10^6 γ$/s with an average energy of about 24 MeV was generated. Several upgrades currently in progress are also described. △ Less

Submitted 14 October, 2011; originally announced October 2011.

Report number: IPAC 2011: TUPO002

Shintake Monitor in ATF2 : Present Status

Authors: Takashi Yamanaka, Masahiro Oroku, Yohei Yamaguchi, Yoshio Kamiya, Taikan Suehara, Sachio Komamiya, Toshiyuki Okugi, Nobuhiro Terunuma, Toshiaki Tauchi, Sakae Araki, Junji Urakawa

Abstract: A beam size monitor so called Shintake monitor, which uses the inverse Compton scattering between the laser interference fringe and the electron beam was designed for and installed at ATF2. The commissioning at ATF2 was started in the end of 2008 and succeeded in the measurement of the fringe pattern from the scattered gamma-rays. The present status of the Shintake monitor is described here. A beam size monitor so called Shintake monitor, which uses the inverse Compton scattering between the laser interference fringe and the electron beam was designed for and installed at ATF2. The commissioning at ATF2 was started in the end of 2008 and succeeded in the measurement of the fringe pattern from the scattered gamma-rays. The present status of the Shintake monitor is described here. △ Less

Submitted 18 June, 2010; originally announced June 2010.

Comments: 5 pages, 4 figures, Proceedings of LCWS/ILC 2010

Shintake Monitor in ATF2: Performance Evaluation

Authors: Y. Yamaguchi, T. Yamanaka, M. Oroku, Y. Kamiya, S. Komamiya, T. Suehara, T. Okugi, N. Terunuma, T. Tauchi, S. Araki, J. Urakawa

Abstract: The beam test for the Shintake monitor succeeded in measuring signal modulation with the laser interference fringe pattern in November 2009. We have studied the error sources, and evaluated the systematic error to be less than 30% for 1 minute measurements. This paper centers on the evaluation of the Shintake monitor performance through analyzing beam tests deta. Most systematic error sources are… ▽ More The beam test for the Shintake monitor succeeded in measuring signal modulation with the laser interference fringe pattern in November 2009. We have studied the error sources, and evaluated the systematic error to be less than 30% for 1 minute measurements. This paper centers on the evaluation of the Shintake monitor performance through analyzing beam tests deta. Most systematic error sources are well understood, enabling accurate measurement of the beam size when it reaches 37 nm. △ Less

Submitted 17 June, 2010; v1 submitted 17 June, 2010; originally announced June 2010.

Photon generation by laser-Compton scattering at the KEK-ATF

Authors: Shuhei Miyoshi, Tomoya Akagi, Sakae Araki, Yoshisato Funahashi, Tachishige Hirose, Yosuke Honda, Masao Kuriki, Xiao Li, Toshiyuki Okugi, Tsunehiko Omori, Guoxi Pei, Kazuyuki Sakaue, Hirotaka Shimizu, Tohru Takahashi, Nobuhiro Terunuma, Junji Urakawa, Yasuaki Ushio, Masakazu Washio

Abstract: We performed a photon generation experiment by laser-Compton scattering at the KEK-ATF, aiming to develop a Compton based polarized positron source for linear colliders. In the experiment, laser pulses with a 357 MHz repetition rate were accumulated and their power was enhanced by up to 250 times in the Fabry-Perot optical resonant cavity. We succeeded in synchronizing the laser pulses and colli… ▽ More We performed a photon generation experiment by laser-Compton scattering at the KEK-ATF, aiming to develop a Compton based polarized positron source for linear colliders. In the experiment, laser pulses with a 357 MHz repetition rate were accumulated and their power was enhanced by up to 250 times in the Fabry-Perot optical resonant cavity. We succeeded in synchronizing the laser pulses and colliding them with the 1.3 GeV electron beam in the ATF ring while maintaining the laser pulse accumulation in the cavity. As a result, we observed 26.0 +/- 0.1 photons per electron-laser pulse crossing, which corresponds to a yield of 10^8 photons in a second. △ Less

Submitted 18 February, 2010; originally announced February 2010.

Comments: 3 pages, 5 figures, Preprint submitted to TIPP09 Proceedings in NIMA

Design of a Polarised Positron Source Based on Laser Compton Scattering

Authors: S. Araki, Y. Higashi, Y. Honda, Y. Kurihara, M. Kuriki, T. Okugi, T. Omori, T. Taniguchi, N. Terunuma, J. Urakawa, X. Artru, M. Chevallier, V. Strakhovenko, E. Bulyak, P. Gladkikh, K. Moenig, R. Chehab, A. Variola, F. Zomer, S. Guiducci, P. Raimondi, F. Zimmermann, K. Sakaue, T. Hirose, M. Washio , et al. (10 additional authors not shown)

Abstract: We describe a scheme for producing polarised positrons at the ILC from polarised X-rays created by Compton scattering of a few-GeV electron beam off a CO2 or YAG laser. This scheme is very energy effective using high finesse laser cavities in conjunction with an electron storage ring. We describe a scheme for producing polarised positrons at the ILC from polarised X-rays created by Compton scattering of a few-GeV electron beam off a CO2 or YAG laser. This scheme is very energy effective using high finesse laser cavities in conjunction with an electron storage ring. △ Less

Submitted 15 September, 2005; v1 submitted 2 September, 2005; originally announced September 2005.

Comments: Proposal submitted to the ILC workshop, Snowmass 2005. v2: note number added

Report number: CARE/ELAN Document-2005-013, CLIC Note 639, KEK Preprint 2005-60, LAL 05-94