-
In vivo mapping organellar metabolism by optical-boxcar enhanced fluorescence-detected mid-infrared photothermal microscopy
Authors:
Jianpeng Ao,
Jiaze Yin,
Haonan Lin,
Guangrui Ding,
Youchen Guan,
Bethany Weinberg,
Dashan Dong,
Qing Xia,
Zhongyue Guo,
Marzia Savini,
Biwen Gao,
Ji-Xin Cheng,
Meng C. Wang
Abstract:
Metabolism unfolds within specific organelles in eukaryotic cells. Lysosomes are highly metabolically active organelles, and their metabolic states dynamically influence signal transduction, cellular homeostasis, and organismal physiopathology. Despite the significance of lysosomal metabolism, a method for its in vivo measurement is currently lacking. Here, we report optical boxcar-enhanced, fluor…
▽ More
Metabolism unfolds within specific organelles in eukaryotic cells. Lysosomes are highly metabolically active organelles, and their metabolic states dynamically influence signal transduction, cellular homeostasis, and organismal physiopathology. Despite the significance of lysosomal metabolism, a method for its in vivo measurement is currently lacking. Here, we report optical boxcar-enhanced, fluorescence-detected mid-infrared photothermal microscopy, together with AI-assisted data denoising and spectral deconvolution, to map metabolic activity and composition of individual lysosomes in living cells and organisms. Using this method, we uncovered lipolysis and proteolysis heterogeneity across lysosomes within the same cell, as well as early-onset lysosomal dysfunction during organismal aging. Additionally, we discovered organelle-level metabolic changes associated with diverse lysosomal storage diseases. This method holds the broad potential to profile metabolic fingerprints of individual organelles within their native context and quantitatively assess their dynamic changes under different physiological and pathological conditions, providing a high-resolution chemical cellular atlas.
△ Less
Submitted 5 April, 2025;
originally announced April 2025.
-
Stabilization of sawteeth instability by short gas pulse injection in ADITYA-U tokamak
Authors:
Suman Dolui,
Kaushlender Singh,
Bharat Hegde,
T. Macwan,
SK Injamul Hoque,
Umesh Nagora,
Jaya Kumar A.,
S. Purohit,
A. N. Adhiya,
K. A. Jadeja,
Harshita Raj,
Ankit Kumar,
Ashok K. Kumawat,
Suman Aich,
Rohit Kumar,
K. M. Patel,
P. Gautam,
Sharvil Patel,
N. Yadava,
N. Ramaiya,
M. K. Gupta,
S. K. Pathak,
M. B. Chowdhuri,
S. Sharma,
A. Kuley
, et al. (6 additional authors not shown)
Abstract:
Experiments on ADITYA-U tokamak show a marked enhancement in the sawtooth period by application of short gas puffs of fuel that cause a modification of the radial density profile. A consequent suppression of the trapped electron modes (TEMs) then leads to an increase in the core electron temperature. This slows down the heat propagation following a sawtooth crash, causing a delay in achieving the…
▽ More
Experiments on ADITYA-U tokamak show a marked enhancement in the sawtooth period by application of short gas puffs of fuel that cause a modification of the radial density profile. A consequent suppression of the trapped electron modes (TEMs) then leads to an increase in the core electron temperature. This slows down the heat propagation following a sawtooth crash, causing a delay in achieving the critical temperature gradient inside the q = 1 surface required for the next sawtooth crash to happen. The overall scenario has strong similarities with the behavior of sawtooth under electron cyclotron resonance heating (ECRH). Our findings suggest an alternate, simpler technique for sawtooth control that may be usefully employed in small/medium-sized tokamaks that do not have an ECRH or any other auxiliary heating facility.
△ Less
Submitted 3 January, 2025;
originally announced January 2025.
-
Hafnia-based Phase-Change Ferroelectric Steep-Switching FETs on a 2-D MoS$_2$ platform
Authors:
Sooraj Sanjay,
Jalaja M. A,
Navakanta Bhat,
Pavan Nukala
Abstract:
Ferroelectric field-effect transistors integrated on 2D semiconducting platforms are extremely relevant for low power electronics. Here, we propose and demonstrate a novel phase-change ferroelectric field effect transistor (PCFE-FET) for steep switching applications. Our gate stack is engineered as a ferroelectric Lanthanum doped hafnium oxide (LHO) proximity coupled with Mott insulator Ti$_x$O…
▽ More
Ferroelectric field-effect transistors integrated on 2D semiconducting platforms are extremely relevant for low power electronics. Here, we propose and demonstrate a novel phase-change ferroelectric field effect transistor (PCFE-FET) for steep switching applications. Our gate stack is engineered as a ferroelectric Lanthanum doped hafnium oxide (LHO) proximity coupled with Mott insulator Ti$_x$O$_{2x-1}$(N$_y$) and is integrated onto a 2D MoS$_2$ channel. The interplay of partial polarization switching in the ferroelectric LHO layer and reversible field-tunable metal-insulator transition (MIT) in Ti$_x$O$_{2x-1}$(N$_y$) layer concomitantly triggers polar to non-polar phase transition in the LHO layer between 200 and 220 K. This results in distinctive step-like features in the channel current during DC measurements, and random current fluctuations in high-speed measurements with slim anticlockwise hysteresis. Our devices show subthreshold slopes as steep as 25 mV/dec at 210 K, breaking the Boltzmann limit. Our gate stack is also potentially tunable for operation at temperatures of interest, presenting innovative gate stack engineering approaches for low-power computing solutions.
△ Less
Submitted 4 November, 2024;
originally announced November 2024.
-
Exploring Fundamental Particle Acceleration and Loss Processes in Heliophysics through an Orbiting X-ray Instrument in the Jovian System
Authors:
W. Dunn,
G. Berland,
E. Roussos,
G. Clark,
P. Kollmann,
D. Turner,
C. Feldman,
T. Stallard,
G. Branduardi-Raymont,
E. E. Woodfield,
I. J. Rae,
L. C. Ray,
J. A. Carter,
S. T. Lindsay,
Z. Yao,
R. Marshall,
A. N. Jaynes A.,
Y. Ezoe,
M. Numazawa,
G. B. Hospodarsky,
X. Wu,
D. M. Weigt,
C. M. Jackman,
K. Mori,
Q. Nénon
, et al. (19 additional authors not shown)
Abstract:
Jupiter's magnetosphere is considered to be the most powerful particle accelerator in the Solar System, accelerating electrons from eV to 70 MeV and ions to GeV energies. How electromagnetic processes drive energy and particle flows, producing and removing energetic particles, is at the heart of Heliophysics. Particularly, the 2013 Decadal Strategy for Solar and Space Physics was to "Discover and…
▽ More
Jupiter's magnetosphere is considered to be the most powerful particle accelerator in the Solar System, accelerating electrons from eV to 70 MeV and ions to GeV energies. How electromagnetic processes drive energy and particle flows, producing and removing energetic particles, is at the heart of Heliophysics. Particularly, the 2013 Decadal Strategy for Solar and Space Physics was to "Discover and characterize fundamental processes that occur both within the heliosphere and throughout the universe". The Jovian system offers an ideal natural laboratory to investigate all of the universal processes highlighted in the previous Decadal. The X-ray waveband has been widely used to remotely study plasma across astrophysical systems. The majority of astrophysical emissions can be grouped into 5 X-ray processes: fluorescence, thermal/coronal, scattering, charge exchange and particle acceleration. The Jovian system offers perhaps the only system that presents a rich catalog of all of these X-ray emission processes and can also be visited in-situ, affording the special possibility to directly link fundamental plasma processes with their resulting X-ray signatures. This offers invaluable ground-truths for astrophysical objects beyond the reach of in-situ exploration (e.g. brown dwarfs, magnetars or galaxy clusters that map the cosmos). Here, we show how coupling in-situ measurements with in-orbit X-ray observations of Jupiter's radiation belts, Galilean satellites, Io Torus, and atmosphere addresses fundamental heliophysics questions with wide-reaching impact across helio- and astrophysics. New developments like miniaturized X-ray optics and radiation-tolerant detectors, provide compact, lightweight, wide-field X-ray instruments perfectly suited to the Jupiter system, enabling this exciting new possibility.
△ Less
Submitted 2 March, 2023;
originally announced March 2023.
-
The effect of collisional erosion on the composition of Earth-analog planets in Grand Tack models: Implications for the formation of the Earth
Authors:
Allibert L.,
Siebert J.,
Charnoz S.,
Jacobson S. A.,
Raymond S. N
Abstract:
Impact-induced erosion of the Earth's early crust during accretion of terrestrial bodies can significantly modify the primordial chemical composition of the Bulk Silicate Earth (BSE, that is, the composition of the crust added to the present-day mantle). In particular, it can be particularly efficient in altering the abundances of elements having a strong affinity for silicate melts (i.e. incompat…
▽ More
Impact-induced erosion of the Earth's early crust during accretion of terrestrial bodies can significantly modify the primordial chemical composition of the Bulk Silicate Earth (BSE, that is, the composition of the crust added to the present-day mantle). In particular, it can be particularly efficient in altering the abundances of elements having a strong affinity for silicate melts (i.e. incompatible elements) as the early differentiated crust was preferentially enriched in those. Here, we further develop an erosion model (EROD) to quantify the effects of collisional erosion on the final composition of the BSE. Results are compared to the present-day BSE composition models and constraints on Earth's accretion processes are provided. The evolution of the BSE chemical composition resulting from crustal stripping is computed for entire accretion histories of about 50 Earth analogs in the context of the Grand Tack model. The chosen chemical elements span a wide range of incompatibility degrees. We find that a maximum loss of 40wt% can be expected for the most incompatible lithophile elements such as Rb, Th or U in the BSE when the crust is formed from low partial melting rates. Accordingly, depending on both the exact nature of the crust-forming processes during accretion and the accretion history itself, Refractory Lithophile Elements (RLE) may not be in chondritic relative proportions in the BSE. In that case, current BSE estimates may need to be corrected as a function of the geochemical incompatibility of these elements. Alternatively, if RLE are indeed in chondritic relative proportions in the BSE, accretion scenarios that are efficient in affecting the BSE chemical composition should be questioned.
△ Less
Submitted 21 October, 2022;
originally announced October 2022.
-
Different textured PZT thin films grown on a single SiO2/Ti/Pt stack for piezo MEMS applications
Authors:
Antony Jeyaseelan A,
Vijayendra Shastri,
Kaustav Roy,
Rudra Pratap
Abstract:
For the past two decades piezo MEMS technology are emerging for its low power consumption of ultrasonic sensing and actuation devices for biomedical applications. Still researchers are facing challenges in miniaturization of piezo-MEMS devices. But up-to-date there is no reports on achieving better sensitivity and actuation strength properties in the same piezoelectric material. As piezoelectric m…
▽ More
For the past two decades piezo MEMS technology are emerging for its low power consumption of ultrasonic sensing and actuation devices for biomedical applications. Still researchers are facing challenges in miniaturization of piezo-MEMS devices. But up-to-date there is no reports on achieving better sensitivity and actuation strength properties in the same piezoelectric material. As piezoelectric materials are anisotropic in nature, for that it is essential to grow different textured PZT thin film on a single silicon substrate. In the present investigation we have demonstrated the simple method of growing different textured PZT thin film with same process condition without introducing any buffer layer on a platinised silicon wafer by wet chemical method. For this two types of modified bottom electrode Ti/Pt stacks have been proposed i.e., mono- and bilayer Pt on a same silicon substrate using lithography techniques. The texture of the PZT thin film grown on these Pt layers shows (111) and (100) preferred orientations. The XPS surface analysis was carried out on both Pt surfaces to investigate the anomalous behaviour of different textured PZT on different Pt layers. The measured ferroelectric and piezoelectric properties has shown low remanent polarization and high piezocoefficient values for (100) oriented film as reported. The (100) oriented film shows piezocoefficient (d33,f) value twice than that of (111) oriented PZT thin films on a single silicon substrate.
△ Less
Submitted 25 August, 2022; v1 submitted 12 August, 2022;
originally announced August 2022.
-
OSIRIS: A New Code for Ray Tracing Around Compact Objects
Authors:
Velásquez-Cadavid J. M.,
Arrieta-Villamizar J. A.,
F. D. Lora-Clavijo,
O. M. Pimentel,
Osorio-Vargas J. E
Abstract:
The radiation observed in quasars and active galactic nuclei is mainly produced by a relativistic plasma orbiting close to the black hole event horizon, where strong gravitational effects are relevant. The observational data of such systems can be compared with theoretical models to infer the black hole and plasma properties. In the comparison process, ray tracing algorithms are essential to compu…
▽ More
The radiation observed in quasars and active galactic nuclei is mainly produced by a relativistic plasma orbiting close to the black hole event horizon, where strong gravitational effects are relevant. The observational data of such systems can be compared with theoretical models to infer the black hole and plasma properties. In the comparison process, ray tracing algorithms are essential to computing the trajectories followed by the photons from the source to our telescopes. In this paper, we present OSIRIS: a new stable FORTRAN code capable of efficiently computing null geodesics around compact objects, including general relativistic effects such as gravitational lensing, redshift, and relativistic boosting. The algorithm is based on the Hamiltonian formulation and uses different integration schemes to evolve null geodesics while tracking the error in the Hamiltonian constrain to ensure physical results. We found from an error analysis that the integration schemes are all stable, and the best one maintains an error below $10^{-11}$. Particularly, to test the robustness and ability of the code to evolve geodesics in curved spacetime, we compute the shadow and Einstein rings of a Kerr black hole with different rotation parameters and obtain the image of a thin Keplerian accretion disk around a Schwarzschild black hole. Although OSIRIS is parallelized neither with MPI nor with CUDA, the computation times are of the same order as those reported by other codes with these types of parallel computing platforms.
△ Less
Submitted 31 January, 2022;
originally announced February 2022.
-
Lightning Impulse Current Tests on some Electroconductive Fabrics
Authors:
Jorge A. Cristancho C.,
Carlos A. Rivera G.,
Jorge E. Rodriguez M.,
John J. Pantoja A.,
Liz K. Herrera Q.,
Francisco Roman
Abstract:
On the search of lightweight lightning protection materials that can be used as part of lightning protection systems, we investigate some types of electroconductive fabrics by applying several lightning impulse currents in laboratory. Samples of four commercially available electroconductive textiles were analyzed, two rip-stop, a plain-weave, a nonwoven, and additionally a carbon-impregnated polym…
▽ More
On the search of lightweight lightning protection materials that can be used as part of lightning protection systems, we investigate some types of electroconductive fabrics by applying several lightning impulse currents in laboratory. Samples of four commercially available electroconductive textiles were analyzed, two rip-stop, a plain-weave, a nonwoven, and additionally a carbon-impregnated polymeric film. Under laboratory conditions, each sample was subjected to several lengthwise subsequent lightning-like currents of 8/20 us standard waveform, recording both voltage and current signals. Optical and scanning electron microscope observations were performed after tests, revealing some patterns or morphological changes on the fabric surface. Despite these changes, the investigated conductive textiles withstand the several lightning impulse currents applied. Results suggest that some conductive fabrics could be used in personal mobile shelters, to protect human beings against the earth potential rise caused by a close lightning discharge.
△ Less
Submitted 2 May, 2023; v1 submitted 12 November, 2019;
originally announced November 2019.
-
$\mathcal{PT}$-symmetric tight-binding model with asymmetric couplings
Authors:
Moreno-Rodríguez L. A.,
Izrailev F. M.,
Méndez-Bermúdez J. A
Abstract:
We study spectral and transport properties of one-dimensional tight-binding $\mathcal{PT}$-symmetric chains with alternating couplings. Based on the transfer matrix method, we have analytically developed the expressions for the transmission and reflection coefficients for any values of control parameters. These expressions are obtained in a very compact form which separately imbed the generic ener…
▽ More
We study spectral and transport properties of one-dimensional tight-binding $\mathcal{PT}$-symmetric chains with alternating couplings. Based on the transfer matrix method, we have analytically developed the expressions for the transmission and reflection coefficients for any values of control parameters. These expressions are obtained in a very compact form which separately imbed the generic energy dependence valid for any periodic structure, as well as specific properties of a unit cell composing the scattering setup. Out main interest is in specific properties of the left/right reflections that are due to the $\mathcal{PT}$ symmetric structure of the model. We have found that for the case of asymmetric couplings between dimers, a new type of specific points emerge in the spectrum, which are responsible for quite specific properties of the unidirectional reflectivity.
△ Less
Submitted 29 March, 2019;
originally announced April 2019.
-
Plasma environment effects on K lines of astrophysical interest I. Atomic structure, radiative rates and Auger widths of oxygen ions
Authors:
Deprince J.,
Bautista M. A.,
Fritzsche S.,
Garcia J. A.,
Kallman T. R.,
Mendoza C.,
Palmeri P.,
Quinet P
Abstract:
Aims. In the context of black-hole accretion disks, the main goal of the present study is to estimate the plasma environment effects on the atomic structure and radiative parameters associated with the K-vacancy states in ions of the oxygen isonuclear sequence. Methods. We use a time-averaged Debye-Huckel potential for both the electron-nucleus and the electron-electron interactions implemented in…
▽ More
Aims. In the context of black-hole accretion disks, the main goal of the present study is to estimate the plasma environment effects on the atomic structure and radiative parameters associated with the K-vacancy states in ions of the oxygen isonuclear sequence. Methods. We use a time-averaged Debye-Huckel potential for both the electron-nucleus and the electron-electron interactions implemented in the fully relativistic multiconfiguration Dirac-Fock (MCDF) method. Results. Modified ionization potentials, K thresholds, Auger widths and radiative transition wavelengths and rates are reported for O I - O VII in plasma environments with electron temperature and density ranges 10E5 - 10E7 K and 10E18 - 10E22 cm-3 .
△ Less
Submitted 11 March, 2019;
originally announced March 2019.
-
Interfaces of high efficient kesterite Cu2ZnSnS(e)4 thin film solar cells
Authors:
Shoushuai Gao,
Zhenwu Jiang,
Li Wu,
Jianping Ao,
Yu Zeng,
Yun Sun,
Yi Zhang
Abstract:
Cu2ZnSnS(e)4 (CZTS(e)) solar cells have attracted much attention due to the elemental abundance and the non-toxicity. However, the record efficiency of 12.6% for Cu2ZnSn(S,Se)4 (CZTSSe) solar cells is much lower than that of Cu(In,Ga)Se2 (CIGS) solar cells. One crucial reason is the recombination at interfaces. In recent years, large amount investigations have been done to analyze the interfacial…
▽ More
Cu2ZnSnS(e)4 (CZTS(e)) solar cells have attracted much attention due to the elemental abundance and the non-toxicity. However, the record efficiency of 12.6% for Cu2ZnSn(S,Se)4 (CZTSSe) solar cells is much lower than that of Cu(In,Ga)Se2 (CIGS) solar cells. One crucial reason is the recombination at interfaces. In recent years, large amount investigations have been done to analyze the interfacial problems and improve the interfacial properties via a variety of methods. This paper gives a review of progresses on interfaces of CZTS(e) solar cells, including: (1) the band alignment optimization at buffer/CZTS(e) interface, (2) tailoring the thickness of MoS(e)2 interfacial layers between CZTS(e) absorber and Mo back contact, (3) the passivation of rear interface, (4) the passivation of front interface, and (5) the etching of secondary phases.
△ Less
Submitted 25 November, 2017;
originally announced November 2017.
-
Observational Tracking of the 2D Structure of Coronal Mass Ejections Between the Sun and 1 AU
Authors:
Savani,
N. P.,
Davies,
J. A.,
Davis,
C. J.,
Shiota,
D.,
Rouillard,
A. P.,
Owens,
M. J.,
Kusano,
K.,
Bothmer,
V.,
Bamford,
S. P.,
Lintott,
C. J.,
Smith,
A
Abstract:
The Solar TErrestrial RElations Observatory (STEREO) provides high cadence and high resolution images of the structure and morphology of coronal mass ejections (CMEs) in the inner heliosphere. CME directions and propagation speeds have often been estimated through the use of time-elongation maps obtained from the STEREO Heliospheric Imager (HI) data. Many of these CMEs have been identified by citi…
▽ More
The Solar TErrestrial RElations Observatory (STEREO) provides high cadence and high resolution images of the structure and morphology of coronal mass ejections (CMEs) in the inner heliosphere. CME directions and propagation speeds have often been estimated through the use of time-elongation maps obtained from the STEREO Heliospheric Imager (HI) data. Many of these CMEs have been identified by citizen scientists working within the SolarStormWatch project ( www.solarstormwatch.com ) as they work towards providing robust real-time identification of Earth-directed CMEs. The wide field of view of HI allows scientists to directly observe the two-dimensional (2D) structures, while the relative simplicity of time-elongation analysis means that it can be easily applied to many such events, thereby enabling a much deeper understanding of how CMEs evolve between the Sun and the Earth. For events with certain orientations, both the rear and front edges of the CME can be monitored at varying heliocentric distances (R) between the Sun and 1 AU. Here we take four example events with measurable position angle widths and identified by the citizen scientists. These events were chosen for the clarity of their structure within the HI cameras and their long track lengths in the time-elongation maps. We show a linear dependency with R for the growth of the radial width (W) and the 2D aspect ratio (X) of these CMEs, which are measured out to ~0.7 AU. We estimated the radial width from a linear best fit for the average of the four CMEs. We obtained the relationships W=0.14R+0.04 for the width and X=2.5R+0.86 for the aspect ratio (W and R in units of AU).
△ Less
Submitted 30 March, 2015;
originally announced March 2015.
