-
The Linear Collider Facility (LCF) at CERN
Authors:
H. Abramowicz,
E. Adli,
F. Alharthi,
M. Almanza-Soto,
M. M. Altakach,
S. Ampudia Castelazo,
D. Angal-Kalinin,
J. A. Anguiano,
R. B. Appleby,
O. Apsimon,
A. Arbey,
O. Arquero,
D. Attié,
J. L. Avila-Jimenez,
H. Baer,
Y. Bai,
C. Balazs,
P. Bambade,
T. Barklow,
J. Baudot,
P. Bechtle,
T. Behnke,
A. B. Bellerive,
S. Belomestnykh,
Y. Benhammou
, et al. (386 additional authors not shown)
Abstract:
In this paper we outline a proposal for a Linear Collider Facility as the next flagship project for CERN. It offers the opportunity for a timely, cost-effective and staged construction of a new collider that will be able to comprehensively map the Higgs boson's properties, including the Higgs field potential, thanks to a large span in centre-of-mass energies and polarised beams. A comprehensive pr…
▽ More
In this paper we outline a proposal for a Linear Collider Facility as the next flagship project for CERN. It offers the opportunity for a timely, cost-effective and staged construction of a new collider that will be able to comprehensively map the Higgs boson's properties, including the Higgs field potential, thanks to a large span in centre-of-mass energies and polarised beams. A comprehensive programme to study the Higgs boson and its closest relatives with high precision requires data at centre-of-mass energies from the Z pole to at least 1 TeV. It should include measurements of the Higgs boson in both major production mechanisms, ee -> ZH and ee -> vvH, precision measurements of gauge boson interactions as well as of the W boson, Higgs boson and top-quark masses, measurement of the top-quark Yukawa coupling through ee ->ttH, measurement of the Higgs boson self-coupling through HH production, and precision measurements of the electroweak couplings of the top quark. In addition, ee collisions offer discovery potential for new particles complementary to HL-LHC.
△ Less
Submitted 19 June, 2025; v1 submitted 31 March, 2025;
originally announced March 2025.
-
A Linear Collider Vision for the Future of Particle Physics
Authors:
H. Abramowicz,
E. Adli,
F. Alharthi,
M. Almanza-Soto,
M. M. Altakach,
S Ampudia Castelazo,
D. Angal-Kalinin,
R. B. Appleby,
O. Apsimon,
A. Arbey,
O. Arquero,
A. Aryshev,
S. Asai,
D. Attié,
J. L. Avila-Jimenez,
H. Baer,
J. A. Bagger,
Y. Bai,
I. R. Bailey,
C. Balazs,
T Barklow,
J. Baudot,
P. Bechtle,
T. Behnke,
A. B. Bellerive
, et al. (391 additional authors not shown)
Abstract:
In this paper we review the physics opportunities at linear $e^+e^-$ colliders with a special focus on high centre-of-mass energies and beam polarisation, take a fresh look at the various accelerator technologies available or under development and, for the first time, discuss how a facility first equipped with a technology mature today could be upgraded with technologies of tomorrow to reach much…
▽ More
In this paper we review the physics opportunities at linear $e^+e^-$ colliders with a special focus on high centre-of-mass energies and beam polarisation, take a fresh look at the various accelerator technologies available or under development and, for the first time, discuss how a facility first equipped with a technology mature today could be upgraded with technologies of tomorrow to reach much higher energies and/or luminosities. In addition, we will discuss detectors and alternative collider modes, as well as opportunities for beyond-collider experiments and R\&D facilities as part of a linear collider facility (LCF). The material of this paper will support all plans for $e^+e^-$ linear colliders and additional opportunities they offer, independently of technology choice or proposed site, as well as R\&D for advanced accelerator technologies. This joint perspective on the physics goals, early technologies and upgrade strategies has been developed by the LCVision team based on an initial discussion at LCWS2024 in Tokyo and a follow-up at the LCVision Community Event at CERN in January 2025. It heavily builds on decades of achievements of the global linear collider community, in particular in the context of CLIC and ILC.
△ Less
Submitted 31 March, 2025; v1 submitted 25 March, 2025;
originally announced March 2025.
-
Specification and design for Full Energy Beam Exploitation of the Compact Linear Accelerator for Research and Applications
Authors:
E. W. Snedden,
D. Angal-Kalinin,
A. R. Bainbridge,
A. D. Brynes,
S. R. Buckley,
D. J. Dunning,
J. R. Henderson,
J. K. Jones,
K. J. Middleman,
T. J. Overton,
T. H. Pacey,
A. E. Pollard,
Y. M. Saveliev,
B. J. A. Shepherd,
P. H. Williams,
M. I. Colling,
B. D. Fell,
G. Marshall
Abstract:
The Compact Linear Accelerator for Research and Applications (CLARA) is a 250 MeV ultrabright electron beam test facility at STFC Daresbury Laboratory. A user beam line has been designed to maximise exploitation of CLARA in a variety of fields, including novel acceleration and new modalities of radiotherapy. In this paper we present the specification and design of this beam line for Full Energy Be…
▽ More
The Compact Linear Accelerator for Research and Applications (CLARA) is a 250 MeV ultrabright electron beam test facility at STFC Daresbury Laboratory. A user beam line has been designed to maximise exploitation of CLARA in a variety of fields, including novel acceleration and new modalities of radiotherapy. In this paper we present the specification and design of this beam line for Full Energy Beam Exploitation (FEBE). We outline the key elements which provide users to access ultrashort, low emittance electron bunches in two large experiment chambers. The results of start-to-end simulations are reported which verify the expected beam parameters delivered to these chambers. Key technical systems are detailed, including those which facilitate combination of electron bunches with high power laser pulses.
△ Less
Submitted 22 September, 2023;
originally announced September 2023.
-
The Development of Energy-Recovery Linacs
Authors:
Chris Adolphsen,
Kevin Andre,
Deepa Angal-Kalinin,
Michaela Arnold,
Kurt Aulenbacher,
Steve Benson,
Jan Bernauer,
Alex Bogacz,
Maarten Boonekamp,
Reinhard Brinkmann,
Max Bruker,
Oliver Brüning,
Camilla Curatolo,
Patxi Duthill,
Oliver Fischer,
Georg Hoffstaetter,
Bernhard Holzer,
Ben Hounsell,
Andrew Hutton,
Erk Jensen,
Walid Kaabi,
Dmitry Kayran,
Max Klein,
Jens Knobloch,
Geoff Krafft
, et al. (24 additional authors not shown)
Abstract:
Energy-recovery linacs (ERLs) have been emphasised by the recent (2020) update of the European Strategy for Particle Physics as one of the most promising technologies for the accelerator base of future high-energy physics. The current paper has been written as a base document to support and specify details of the recently published European roadmap for the development of energy-recovery linacs. Th…
▽ More
Energy-recovery linacs (ERLs) have been emphasised by the recent (2020) update of the European Strategy for Particle Physics as one of the most promising technologies for the accelerator base of future high-energy physics. The current paper has been written as a base document to support and specify details of the recently published European roadmap for the development of energy-recovery linacs. The paper summarises the previous achievements on ERLs and the status of the field and its basic technology items. The main possible future contributions and applications of ERLs to particle and nuclear physics as well as industrial developments are presented. The paper includes a vision for the further future, beyond 2030, as well as a comparative data base for the main existing and forthcoming ERL facilities. A series of continuous innovations, such as on intense electron sources or high-quality superconducting cavity technology, will massively contribute to the development of accelerator physics at large. Industrial applications are potentially revolutionary and may carry the development of ERLs much further, establishing another shining example of the impact of particle physics on society and its technical foundation with a special view on sustaining nature.
△ Less
Submitted 27 September, 2022; v1 submitted 5 July, 2022;
originally announced July 2022.
-
European Strategy for Particle Physics -- Accelerator R&D Roadmap
Authors:
C. Adolphsen,
D. Angal-Kalinin,
T. Arndt,
M. Arnold,
R. Assmann,
B. Auchmann,
K. Aulenbacher,
A. Ballarino,
B. Baudouy,
P. Baudrenghien,
M. Benedikt,
S. Bentvelsen,
A. Blondel,
A. Bogacz,
F. Bossi,
L. Bottura,
S. Bousson,
O. Brüning,
R. Brinkmann,
M. Bruker,
O. Brunner,
P. N. Burrows,
G. Burt,
S. Calatroni,
K. Cassou
, et al. (111 additional authors not shown)
Abstract:
The 2020 update of the European Strategy for Particle Physics emphasised the importance of an intensified and well-coordinated programme of accelerator R&D, supporting the design and delivery of future particle accelerators in a timely, affordable and sustainable way. This report sets out a roadmap for European accelerator R&D for the next five to ten years, covering five topical areas identified…
▽ More
The 2020 update of the European Strategy for Particle Physics emphasised the importance of an intensified and well-coordinated programme of accelerator R&D, supporting the design and delivery of future particle accelerators in a timely, affordable and sustainable way. This report sets out a roadmap for European accelerator R&D for the next five to ten years, covering five topical areas identified in the Strategy update. The R&D objectives include: improvement of the performance and cost-performance of magnet and radio-frequency acceleration systems; investigations of the potential of laser / plasma acceleration and energy-recovery linac techniques; and development of new concepts for muon beams and muon colliders. The goal of the roadmap is to document the collective view of the field on the next steps for the R&D programme, and to provide the evidence base to support subsequent decisions on prioritisation, resourcing and implementation.
△ Less
Submitted 30 March, 2022; v1 submitted 19 January, 2022;
originally announced January 2022.
-
Pushing the Capture Limit of Thermionic Gun Linacs
Authors:
Sadiq Setiniyaz,
Alejandro Castilla,
Julian McKenzie,
Robert Apsimon,
Boris Militsyn,
Deepa Angal-Kalinin,
Graeme Burt
Abstract:
Although accelerator technology has matured sufficiently, state-of-the-art X-ray linacs for radiotherapy and cargo-scanning capture merely 30-50% of the electrons from a thermionic cathode, requiring a higher cathode current and leaving uncaptured electrons to cause problems due to back bombardment, shortening of cathode life, etc. Any solution to increase capture should be effective, simple, reli…
▽ More
Although accelerator technology has matured sufficiently, state-of-the-art X-ray linacs for radiotherapy and cargo-scanning capture merely 30-50% of the electrons from a thermionic cathode, requiring a higher cathode current and leaving uncaptured electrons to cause problems due to back bombardment, shortening of cathode life, etc. Any solution to increase capture should be effective, simple, reliable, compact, and low cost in order to be adopted by industry. To address this, we present the design of a 6 MeV high capture efficiency S-band electron linac that captures 90% of the initial DC beam. This linac does not require any extra parts that would increase the cost as the high efficiency is achieved via a low-field-amplitude in the first bunching cell to decrease the number of backstreaming electrons, to velocity bunch the electron beam, and recapture backstreaming electrons. Under the low field amplitude, any electrons launched at decelerating phases travel backward with low speeds, thus most of them can catch the next RF cycle, and get re-accelerated/recaptured. As the electron speed is low, the cell length is also shorter than existing linacs. Such a short field is achieved by the use of asymmetric cells with differential coupling to the side-coupled cells. Our novel design has implications for all commercial high current thermionic gun linacs for increasing beam current and increasing cathode lifetime.
△ Less
Submitted 31 August, 2021; v1 submitted 20 May, 2021;
originally announced May 2021.
-
Scientific opportunies for bERLinPro 2020+, report with ideas and conclusions from bERLinProCamp 2019
Authors:
Thorsten Kamps,
Michael Abo-Bakr,
Andreas Adelmann,
Kevin Andre,
Deepa Angal-Kalinin,
Felix Armborst,
Andre Arnold,
Michaela Arnold,
Raymond Amador,
Stephen Benson,
Yulia Choporova,
Illya Drebot,
Ralph Ernstdorfer,
Pavel Evtushenko,
Kathrin Goldammer,
Andreas Jankowiak,
Georg Hofftstaetter,
Florian Hug,
Ji-Gwang Hwang,
Lee Jones,
Julius Kuehn,
Jens Knobloch,
Bettina Kuske,
Andre Lampe,
Sonal Mistry
, et al. (16 additional authors not shown)
Abstract:
The Energy Recovery Linac (ERL) paradigm offers the promise to generate intense electron beams of superior quality with extremely small six-dimensional phase space for many applications in the physical sciences, materials science, chemistry, health, information technology and security. Helmholtz-Zentrum Berlin started in 2010 an intensive R\&D programme to address the challenges related to the ERL…
▽ More
The Energy Recovery Linac (ERL) paradigm offers the promise to generate intense electron beams of superior quality with extremely small six-dimensional phase space for many applications in the physical sciences, materials science, chemistry, health, information technology and security. Helmholtz-Zentrum Berlin started in 2010 an intensive R\&D programme to address the challenges related to the ERL as driver for future light sources by setting up the bERLinPro (Berlin ERL Project) ERL with 50 MeV beam energy and high average current. The project is close to reach its major milestone in 2020, acceleration and recovery of a high brightness electron beam.
The goal of bERLinProCamp 2019 was to discuss scientific opportunities for bERLinPro 2020+. bERLinProCamp 2019 was held on Tue, 17.09.2019 at Helmholtz-Zentrum Berlin, Berlin, Germany. This paper summarizes the main themes and output of the workshop.
△ Less
Submitted 8 January, 2020; v1 submitted 2 October, 2019;
originally announced October 2019.
-
Machine Layout and Performance
Authors:
D. Angal-Kalinin,
R. Appleby,
G. Arduini,
D. Banfi,
J. Barranco,
N. Biancacci,
D. Brett,
R. Bruce,
O. Bruening,
X. Buffat,
A. Burov,
Y. Cai,
R. Calaga,
A. Chancé,
M. Crouch,
B. Dalena,
H. Day,
R. de Maria,
J. Esteban Muller,
S. Fartoukh,
M. Fitterer,
O. Frasciello,
M. Giovannozzi,
W. Herr,
W. Höfle
, et al. (35 additional authors not shown)
Abstract:
Chapter 2 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temper…
▽ More
Chapter 2 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temperature and density. To sustain and extend its discovery potential, the LHC will need a major upgrade in the 2020s. This will increase its luminosity (rate of collisions) by a factor of five beyond the original design value and the integrated luminosity (total collisions created) by a factor ten. The LHC is already a highly complex and exquisitely optimised machine so this upgrade must be carefully conceived and will require about ten years to implement. The new configuration, known as High Luminosity LHC (HL-LHC), will rely on a number of key innovations that push accelerator technology beyond its present limits. Among these are cutting-edge 11-12 tesla superconducting magnets, compact superconducting cavities for beam rotation with ultra-precise phase control, new technology and physical processes for beam collimation and 300 metre-long high-power superconducting links with negligible energy dissipation. The present document describes the technologies and components that will be used to realise the project and is intended to serve as the basis for the detailed engineering design of HL-LHC.
△ Less
Submitted 26 May, 2017;
originally announced May 2017.
-
PERLE: Powerful Energy Recovery Linac for Experiments - Conceptual Design Report
Authors:
D. Angal-Kalinin,
G. Arduini,
B. Auchmann,
J. Bernauer,
A. Bogacz,
F. Bordry,
S. Bousson,
C. Bracco,
O. Brüning,
R. Calaga,
K. Cassou,
V. Chetvertkova,
E. Cormier,
E. Daly,
D. Douglas,
K. Dupraz,
B. Goddard,
J. Henry,
A. Hutton,
E. Jensen,
W. Kaabi,
M. Klein,
P. Kostka,
F. Marhauser,
A. Martens
, et al. (17 additional authors not shown)
Abstract:
A conceptual design is presented of a novel ERL facility for the development and application of the energy recovery technique to linear electron accelerators in the multi-turn, large current and large energy regime. The main characteristics of the powerful energy recovery linac experiment facility (PERLE) are derived from the design of the Large Hadron electron Collider, an electron beam upgrade u…
▽ More
A conceptual design is presented of a novel ERL facility for the development and application of the energy recovery technique to linear electron accelerators in the multi-turn, large current and large energy regime. The main characteristics of the powerful energy recovery linac experiment facility (PERLE) are derived from the design of the Large Hadron electron Collider, an electron beam upgrade under study for the LHC, for which it would be the key demonstrator. PERLE is thus projected as a facility to investigate efficient, high current (> 10 mA) ERL operation with three re-circulation passages through newly designed SCRF cavities, at 801.58 MHz frequency, and following deceleration over another three re-circulations. In its fully equipped configuration, PERLE provides an electron beam of approximately 1 GeV energy. A physics programme possibly associated with PERLE is sketched, consisting of high precision elastic electron-proton scattering experiments, as well as photo-nuclear reactions of unprecedented intensities with up to 30 MeV photon beam energy as may be obtained using Fabry-Perot cavities. The facility has further applications as a general technology test bed that can investigate and validate novel superconducting magnets (beam induced quench tests) and superconducting RF structures (structure tests with high current beams, beam loading and transients). Besides a chapter on operation aspects, the report contains detailed considerations on the choices for the SCRF structure, optics and lattice design, solutions for arc magnets, source and injector and on further essential components. A suitable configuration derived from the here presented design concept may next be moved forward to a technical design and possibly be built by an international collaboration which is being established.
△ Less
Submitted 24 May, 2017;
originally announced May 2017.
-
Technical Design Report EuroGammaS proposal for the ELI-NP Gamma beam System
Authors:
O. Adriani,
S. Albergo,
D. Alesini,
M. Anania,
D. Angal-Kalinin,
P. Antici,
A. Bacci,
R. Bedogni,
M. Bellaveglia,
C. Biscari,
N. Bliss,
R. Boni,
M. Boscolo,
F. Broggi,
P. Cardarelli,
K. Cassou,
M. Castellano,
L. Catani,
I. Chaikovska,
E. Chiadroni,
R. Chiche,
A. Cianchi,
J. Clarke,
A. Clozza,
M. Coppola
, et al. (84 additional authors not shown)
Abstract:
The machine described in this document is an advanced Source of up to 20 MeV Gamma Rays based on Compton back-scattering, i.e. collision of an intense high power laser beam and a high brightness electron beam with maximum kinetic energy of about 720 MeV. Fully equipped with collimation and characterization systems, in order to generate, form and fully measure the physical characteristics of the pr…
▽ More
The machine described in this document is an advanced Source of up to 20 MeV Gamma Rays based on Compton back-scattering, i.e. collision of an intense high power laser beam and a high brightness electron beam with maximum kinetic energy of about 720 MeV. Fully equipped with collimation and characterization systems, in order to generate, form and fully measure the physical characteristics of the produced Gamma Ray beam. The quality, i.e. phase space density, of the two colliding beams will be such that the emitted Gamma ray beam is characterized by energy tunability, spectral density, bandwidth, polarization, divergence and brilliance compatible with the requested performances of the ELI-NP user facility, to be built in Romania as the Nuclear Physics oriented Pillar of the European Extreme Light Infrastructure. This document illustrates the Technical Design finally produced by the EuroGammaS Collaboration, after a thorough investigation of the machine expected performances within the constraints imposed by the ELI-NP tender for the Gamma Beam System (ELI-NP-GBS), in terms of available budget, deadlines for machine completion and performance achievement, compatibility with lay-out and characteristics of the planned civil engineering.
△ Less
Submitted 14 July, 2014;
originally announced July 2014.
-
A plasma wakefield acceleration experiment using CLARA beam
Authors:
G. Xia,
D. Angal-Kalinin,
J. Clarke,
J. Smith,
E. Cormier-Michel,
J. Jones,
P. H. Williams,
J. W. Mckenzie,
B. L. Militsyn,
K. Hanahoe,
O. Mete,
A. Aimidula,
C. P. Welsch
Abstract:
We propose a Plasma Accelerator Research Station (PARS) based at proposed FEL test facility CLARA (Compact Linear Accelerator for Research and Applications) at Daresbury Laboratory. The idea is to use the relativistic electron beam from CLARA, to investigate some key issues in electron beam transport and in electron beam driven plasma wakefield acceleration, e.g. high gradient plasma wakefield exc…
▽ More
We propose a Plasma Accelerator Research Station (PARS) based at proposed FEL test facility CLARA (Compact Linear Accelerator for Research and Applications) at Daresbury Laboratory. The idea is to use the relativistic electron beam from CLARA, to investigate some key issues in electron beam transport and in electron beam driven plasma wakefield acceleration, e.g. high gradient plasma wakefield excitation driven by a relativistic electron bunch, two bunch experiment for CLARA beam energy doubling, high transformer ratio, long bunch self-modulation and some other advanced beam dynamics issues. This paper presents the feasibility studies of electron beam transport to meet the requirements for beam driven wakefield acceleration and presents the plasma wakefield simulation results based on CLARA beam parameters. Other possible experiments which can be conducted at the PARS beam line are also discussed.
△ Less
Submitted 24 April, 2014;
originally announced April 2014.
-
Experimental and Theoretical Progress of Linear Collider Final Focus Design and ATF2 Facility
Authors:
Andrei Seryi,
Rogelio Tomas,
Frank Zimmermann,
Kiyoshi Kubo,
Shigeru Kuroda,
Toshiyuki Okugi,
Toshiaki Tauchi,
Nobuhiro Terunuma,
Junji Urakawa,
Glen White,
Mark Woodley,
Deepa Angal-Kalinin
Abstract:
In this brief overview we will reflect on the process of the design of the linear collider (LC) final focus (FF) optics, and will also describe the theoretical and experimental efforts on design and practical realisation of a prototype of the LC FF optics implemented in the ATF2 facility at KEK, Japan, presently being commissioned and operated.
In this brief overview we will reflect on the process of the design of the linear collider (LC) final focus (FF) optics, and will also describe the theoretical and experimental efforts on design and practical realisation of a prototype of the LC FF optics implemented in the ATF2 facility at KEK, Japan, presently being commissioned and operated.
△ Less
Submitted 8 April, 2014;
originally announced April 2014.
-
Present status and first results of the final focus beam line at the KEK Accelerator Test Facility
Authors:
P. Bambade,
M. Alabau Pons,
J. Amann,
D. Angal-Kalinin,
R. Apsimon,
S. Araki,
A. Aryshev,
S. Bai,
P. Bellomo,
D. Bett,
G. Blair,
B. Bolzon,
S. Boogert,
G. Boorman,
P. N. Burrows,
G. Christian,
P. Coe,
B. Constance,
Jean-Pierre Delahaye,
L. Deacon,
E. Elsen,
A. Faus-Golfe,
M. Fukuda,
J. Gao,
N. Geffroy
, et al. (69 additional authors not shown)
Abstract:
ATF2 is a final-focus test beam line which aims to focus the low emittance beam from the ATF damping ring to a vertical size of about 37 nm and to demonstrate nanometer level beam stability. Several advanced beam diagnostics and feedback tools are used. In December 2008, construction and installation were completed and beam commissioning started, supported by an international team of Asian, Europe…
▽ More
ATF2 is a final-focus test beam line which aims to focus the low emittance beam from the ATF damping ring to a vertical size of about 37 nm and to demonstrate nanometer level beam stability. Several advanced beam diagnostics and feedback tools are used. In December 2008, construction and installation were completed and beam commissioning started, supported by an international team of Asian, European, and U.S. scientists. The present status and first results are described.
△ Less
Submitted 5 July, 2012;
originally announced July 2012.
-
Status report of the baseline collimation system of CLIC. Part II
Authors:
J. Resta-Lopez,
D. Angal-Kalinin,
B. Dalena,
J. L. Fernandez-Hernando,
F. Jackson,
D. Schulte,
A. Seryi,
R. Tomas
Abstract:
Important efforts have recently been dedicated to the characterisation and improvement of the design of the post-linac collimation system of the Compact Linear Collider (CLIC). This system consists of two sections: one dedicated to the collimation of off-energy particles and another one for betatron collimation. The energy collimation system is further conceived as protection system against damage…
▽ More
Important efforts have recently been dedicated to the characterisation and improvement of the design of the post-linac collimation system of the Compact Linear Collider (CLIC). This system consists of two sections: one dedicated to the collimation of off-energy particles and another one for betatron collimation. The energy collimation system is further conceived as protection system against damage by errant beams. In this respect, special attention is paid to the optimisation of the energy collimator design. The material and the physical parameters of the energy collimators are selected to withstand the impact of an entire bunch train. Concerning the betatron collimation section, different aspects of the design have been optimised: the transverse collimation depths have been recalculated in order to reduce the collimator wakefield effects while maintaining a good efficiency in cleaning the undesired beam halo; the geometric design of the spoilers has been reviewed to minimise wakefields; in addition, the optics design has been optimised to improve the collimation efficiency. This report presents the current status of the the post-linac collimation system of CLIC. Part II is mainly dedicated to the study of the betatron collimation system and collimator wakefield effects.
△ Less
Submitted 13 April, 2011;
originally announced April 2011.
-
Status report of the baseline collimation system of CLIC. Part I
Authors:
J. Resta-Lopez,
D. Angal-Kalinin,
B. Dalena,
J. L. Fernandez-Hernando,
F. Jackson,
D. Schulte,
A. Seryi,
R. Tomas
Abstract:
Important efforts have recently been dedicated to the characterisation and improvement of the design of the post-linac collimation system of the Compact Linear Collider (CLIC). This system consists of two sections: one dedicated to the collimation of off-energy particles and another one for betatron collimation. The energy collimation system is further conceived as protection system against damage…
▽ More
Important efforts have recently been dedicated to the characterisation and improvement of the design of the post-linac collimation system of the Compact Linear Collider (CLIC). This system consists of two sections: one dedicated to the collimation of off-energy particles and another one for betatron collimation. The energy collimation system is further conceived as protection system against damage by errant beams. In this respect, special attention is paid to the optimisation of the energy collimator design. The material and the physical parameters of the energy collimators are selected to withstand the impact of an entire bunch train. Concerning the betatron collimation section, different aspects of the design have been optimised: the transverse collimation depths have been recalculated in order to reduce the collimator wakefield effects while maintaining a good efficiency in cleaning the undesired beam halo; the geometric design of the spoilers has been reviewed to minimise wakefields; in addition, the optics design has been optimised to improve the collimation efficiency. This report presents the current status of the the post-linac collimation system of CLIC. Part I of this report is dedicated to the study of the CLIC energy collimation system.
△ Less
Submitted 13 April, 2011;
originally announced April 2011.
-
Design of an interaction region with head-on collisions for the ILC
Authors:
R. Appleby,
D. Angal-Kalinin,
F. Jackson,
M . Alabau-Pons,
P. Bambade,
J. Brossard,
O. Dadoun,
C. Rimbault,
L. Keller,
Y. Nosochkov,
A. Seryi,
J. Payet,
O. Napoly,
C. Rippon,
D. Uriot
Abstract:
An interaction region (IR) with head-on collisions is considered as an alternative to the baseline configuration of the International Linear Collider (ILC) which includes two IRs with finite crossing-angles (2 and 20 mrad). Although more challenging for the beam extraction, the head-on scheme is favoured by the experiments because it allows a more convenient detector configuration, particularly…
▽ More
An interaction region (IR) with head-on collisions is considered as an alternative to the baseline configuration of the International Linear Collider (ILC) which includes two IRs with finite crossing-angles (2 and 20 mrad). Although more challenging for the beam extraction, the head-on scheme is favoured by the experiments because it allows a more convenient detector configuration, particularly in the forward region. The optics of the head-on extraction is revisited by separating the e+ and e- beams horizontally, first by electrostatic separators operated at their LEP nominal field and then using a defocusing quadrupole of the final focus beam line. In this way the septum magnet is protected from the beamstrahlung power. Newly optimized final focus and extraction optics are presented, including a first look at post-collision diagnostics. The influence of parasitic collisions is shown to lead to a region of stable collision parameters. Disrupted beam and beamstrahlung photon losses are calculated along the extraction elements.
△ Less
Submitted 28 September, 2006;
originally announced September 2006.
-
The 2 mrad crossing-angle ILC interaction region and extraction line
Authors:
R. Appleby,
D. Angal-Kalinin,
P. Bambade,
O. Dadoun,
B. Parker,
L. Keller,
K. Moffeit,
Y. Nosochkov,
A. Seryi,
C. Spencer,
J. Carter,
O. Napoly
Abstract:
A complete optics design for the 2mrad crossing angle interaction region and extraction line was presented at Snowmass 2005. Since this time, the design task force has been working on developing and improving the performance of the extraction line. The work has focused on optimising the final doublet parameters and on reducing the power losses resulting from the disrupted beam transport. In this…
▽ More
A complete optics design for the 2mrad crossing angle interaction region and extraction line was presented at Snowmass 2005. Since this time, the design task force has been working on developing and improving the performance of the extraction line. The work has focused on optimising the final doublet parameters and on reducing the power losses resulting from the disrupted beam transport. In this paper, the most recent status of the 2mrad layout and the corresponding performance are presented.
△ Less
Submitted 19 July, 2006;
originally announced July 2006.
-
The 2mrad horizontal crossing angle IR layout for a TeV ILC
Authors:
R. Appleby,
D. Angal-Kalinin,
P. Bambade,
B. Mouton,
O. Napoly,
J. Payet,
A. Seryi,
Y. Nosochkov
Abstract:
The current status of the 2mrad crossing angle layout for the ILC is reviewed. The scheme developed in the UK and France is described and the performance discussed for a TeV machine. Secondly, the scheme developed at SLAC and BNL is then studied and modified for a TeV machine. We find that both schemes can handle the higher energy beam with modifications, and share many common features.
The current status of the 2mrad crossing angle layout for the ILC is reviewed. The scheme developed in the UK and France is described and the performance discussed for a TeV machine. Secondly, the scheme developed at SLAC and BNL is then studied and modified for a TeV machine. We find that both schemes can handle the higher energy beam with modifications, and share many common features.
△ Less
Submitted 8 July, 2005;
originally announced July 2005.
-
A Test Facility for the International Linear Collider at SLAC End Station A, for Prototypes of Beam Delivery and IR Components
Authors:
M. Woods,
R. Erickson,
J. Frisch,
C. Hast,
R. K. Jobe,
L. Keller,
T. Markiewicz,
T. Maruyama,
D. McCormick,
J. Nelson,
T. Nelson,
N. Phinney,
T. Raubenheimer,
M. Ross,
A. Seryi,
S. Smith,
Z. Szalata,
P. Tenenbaum,
M. Woodley,
D. Angal-Kalinin,
C. Beard,
C. Densham,
J. Greenhalgh,
F. Jackson,
A. Kalinin
, et al. (36 additional authors not shown)
Abstract:
The SLAC Linac can deliver damped bunches with ILC parameters for bunch charge and bunch length to End Station A. A 10Hz beam at 28.5 GeV energy can be delivered there, parasitic with PEP-II operation. We plan to use this facility to test prototype components of the Beam Delivery System and Interaction Region. We discuss our plans for this ILC Test Facility and preparations for carrying out expe…
▽ More
The SLAC Linac can deliver damped bunches with ILC parameters for bunch charge and bunch length to End Station A. A 10Hz beam at 28.5 GeV energy can be delivered there, parasitic with PEP-II operation. We plan to use this facility to test prototype components of the Beam Delivery System and Interaction Region. We discuss our plans for this ILC Test Facility and preparations for carrying out experiments related to collimator wakefields and energy spectrometers. We also plan an interaction region mockup to investigate effects from backgrounds and beam-induced electromagnetic interference.
△ Less
Submitted 24 May, 2005;
originally announced May 2005.
