Showing 1–33 of 33 results for author: Alvarez, M

Numerical Solution Partial Differential Equations using the Discrete Fourier Transform

Authors: Daniela Rodriguez-Lara, Ivan Alvarez-Rios, Francisco S. Guzman

Abstract: In this paper we explain how to use the Fast Fourier Transform (FFT) to solve partial differential equations (PDEs). We start by defining appropriate discrete domains in coordinate and frequency domains. Then describe the main limitation of the method arising from the Sampling Theorem, which defines the critical Nyquist frequency and the aliasing effect. We then define the Fourier Transform (FT) a… ▽ More In this paper we explain how to use the Fast Fourier Transform (FFT) to solve partial differential equations (PDEs). We start by defining appropriate discrete domains in coordinate and frequency domains. Then describe the main limitation of the method arising from the Sampling Theorem, which defines the critical Nyquist frequency and the aliasing effect. We then define the Fourier Transform (FT) and the FFT in a way that can be implemented in one and more dimensions. Finally, we show how to apply the FFT in the solution of PDEs related to problems involving two spatial dimensions, specifically the Poisson equation, the diffusion equation and the wave equation for elliptic, parabolic and hyperbolic cases respectively. △ Less

Submitted 16 December, 2024; originally announced December 2024.

Comments: Prepared for educational purposes, 9 pages, 9 figures. Accepted for publication in the educative section of Revista Mexicana de Fisica

Monte Carlo algorithm for calculating pre-neutron fragment mass and kinetic energy distributions from measurements using the 2E Technique for reaction 235U(nth, f)

Authors: Modesto Montoya, Miguel Roca, Mario Alvarez

Abstract: An algorithm is proposed that enables the calculation of pre-neutron mass and energy distributions of fission fragments from uranium-235, induced by thermal neutrons, utilizing measurements obtained through the 2E technique. This algorithm facilitates the inference of the curve representing the average multiplicity of prompt neutrons relative to the pre-neutron mass of the fission fragments. An algorithm is proposed that enables the calculation of pre-neutron mass and energy distributions of fission fragments from uranium-235, induced by thermal neutrons, utilizing measurements obtained through the 2E technique. This algorithm facilitates the inference of the curve representing the average multiplicity of prompt neutrons relative to the pre-neutron mass of the fission fragments. △ Less

Submitted 8 January, 2024; originally announced March 2024.

Comments: 8 pages, 3 figures

MSC Class: 26B30

Physics-informed Meta-instrument for eXperiments (PiMiX) with applications to fusion energy

Authors: Zhehui Wang, Shanny Lin, Miles Teng-Levy, Pinghan Chu, Bradley T. Wolfe, Chun-Shang Wong, Christopher S. Campbell, Xin Yue, Liyuan Zhang, Derek Aberle, Mariana Alvarado Alvarez, David Broughton, Ray T. Chen, Baolian Cheng, Feng Chu, Eric R. Fossum, Mark A. Foster, Chengkun Huang, Velat Kilic, Karl Krushelnick, Wenting Li, Eric Loomis, Thomas Schmidt Jr., Sky K. Sjue, Chris Tomkins , et al. (2 additional authors not shown)

Abstract: Data-driven methods (DDMs), such as deep neural networks, offer a generic approach to integrated data analysis (IDA), integrated diagnostic-to-control (IDC) workflows through data fusion (DF), which includes multi-instrument data fusion (MIDF), multi-experiment data fusion (MXDF), and simulation-experiment data fusion (SXDF). These features make DDMs attractive to nuclear fusion energy and power p… ▽ More Data-driven methods (DDMs), such as deep neural networks, offer a generic approach to integrated data analysis (IDA), integrated diagnostic-to-control (IDC) workflows through data fusion (DF), which includes multi-instrument data fusion (MIDF), multi-experiment data fusion (MXDF), and simulation-experiment data fusion (SXDF). These features make DDMs attractive to nuclear fusion energy and power plant applications, leveraging accelerated workflows through machine learning and artificial intelligence. Here we describe Physics-informed Meta-instrument for eXperiments (PiMiX) that integrates X-ray (including high-energy photons such as $γ$-rays from nuclear fusion), neutron and others (such as proton radiography) measurements for nuclear fusion. PiMiX solves multi-domain high-dimensional optimization problems and integrates multi-modal measurements with multiphysics modeling through neural networks. Super-resolution for neutron detection and energy resolved X-ray detection have been demonstrated. Multi-modal measurements through MIDF can extract more information than individual or uni-modal measurements alone. Further optimization schemes through DF are possible towards empirical fusion scaling laws discovery and new fusion reactor designs. △ Less

Submitted 16 January, 2024; originally announced January 2024.

Comments: 24 pages, 46 references, and 13 Figures. Manuscript extended a recent presentation in the 29th IAEA Fusion Energy Conference (FEC), London, UK, Oct. 16 - 21, 2023

Report number: Los Alamos National Laboratory report number LA-UR-24-20196

Single-Element Dual-Interferometer for Precision Inertial Sensing: Sub-picometer Structural Stability and Performance as a Reference for Laser Frequency Stabilization

Authors: Victor Huarcaya, Miguel Dovale Álvarez, Kohei Yamamoto, Yichao Yang, Stefano Gozzo, Pablo Martínez Cano, Moritz Mehmet, Juan José Esteban Delgado, Jianjun Jia, Gerhard Heinzel

Abstract: To reach sub-picometer sensitivity in the millihertz range, displacement sensors based on laser interferometry require suppression of laser-frequency noise by several orders of magnitude. Many optical frequency stabilization methods exist with varying levels of complexity, size, and performance. In this paper, we describe the performance of a compact Mach-Zehnder interferometer based on a monolith… ▽ More To reach sub-picometer sensitivity in the millihertz range, displacement sensors based on laser interferometry require suppression of laser-frequency noise by several orders of magnitude. Many optical frequency stabilization methods exist with varying levels of complexity, size, and performance. In this paper, we describe the performance of a compact Mach-Zehnder interferometer based on a monolithic optic. The setup consists of a commercial fiber injector, a custom-designed pentaprism used to split and recombine the laser beam, and two photoreceivers placed at the complementary output ports of the interferometer. The structural stability of the prism is transferred to the laser frequency via amplification, integration, and feedback of the balanced-detection signal, achieving a fractional frequency instability better than 6 parts in $10^{13}$, corresponding to an interferometer pathlength stability better than $10^{-12}$ m$/\sqrt{\mathrm{Hz}}$. △ Less

Submitted 1 December, 2023; v1 submitted 2 October, 2023; originally announced October 2023.

Comments: 10 pages, 4 figures

$2\cdot 10^{-13}$ fractional laser frequency stability with a 7-cm unequal-arm Mach-Zehnder interferometer

Authors: Victor Huarcaya, Miguel Dovale Álvarez, Daniel Penkert, Stefano Gozzo, Pablo Martínez Cano, Kohei Yamamoto, Juan José Esteban Delgado, Moritz Mehmet, Karsten Danzmann, Gerhard Heinzel

Abstract: To achieve sub-picometer sensitivities in the millihertz band, laser interferometric inertial sensors rely on some form of reduction of the laser frequency noise, typically by locking the laser to a stable frequency reference, such as the narrow-linewidth resonance of an ultra-stable optical cavity or an atomic or molecular transition. In this paper we report on a compact laser frequency stabiliza… ▽ More To achieve sub-picometer sensitivities in the millihertz band, laser interferometric inertial sensors rely on some form of reduction of the laser frequency noise, typically by locking the laser to a stable frequency reference, such as the narrow-linewidth resonance of an ultra-stable optical cavity or an atomic or molecular transition. In this paper we report on a compact laser frequency stabilization technique based on an unequal-arm Mach-Zehnder interferometer that is sub-nanometer stable at $10\,μ$Hz, sub-picometer at $0.5\,$mHz, and reaches a noise floor of $7\,\mathrm{fm}/\!\sqrt{\mathrm{Hz}}$ at 1 Hz. The interferometer is used in conjunction with a DC servo to stabilize the frequency of a laser down to a fractional instability below $4 \times 10^{-13}$ at averaging times from 0.1 to 100 seconds. The technique offers a wide operating range, does not rely on complex lock acquisition procedures, and can be readily integrated as part of the optical bench in future gravity missions. △ Less

Submitted 29 August, 2023; v1 submitted 22 August, 2023; originally announced August 2023.

Comments: 9 pages, 7 figures

Journal ref: Phys. Rev. Applied 20, 024078 (2023)

Data Preservation for Cosmology

Authors: Marcelo Alvarez, Stephen Bailey, Deborah Bard, Lisa Gerhardt, Julien Guy, Stéphanie Juneau, Anthony Kremin, Brian Nord, David Schlegel, Laurie Stephey, Rollin Thomas, Benjamin Weaver

Abstract: We describe the needs and opportunities for preserving cosmology datasets and simulations, and facilitating their joint analysis beyond the lifetime of individual projects. We recommend that DOE fund a new cosmology data archive center to coordinate this work across the multiple DOE computing facilities. We describe the needs and opportunities for preserving cosmology datasets and simulations, and facilitating their joint analysis beyond the lifetime of individual projects. We recommend that DOE fund a new cosmology data archive center to coordinate this work across the multiple DOE computing facilities. △ Less

Submitted 15 March, 2022; originally announced March 2022.

Comments: Submitted to the Proceedings of the US Community Study on the Future of Particle Physics (Snowmass 2021). Feedback and additional co-signers are welcome

On-axis Optical Bench for Laser Ranging Instruments in future gravity missions

Authors: Yichao Yang, Kohei Yamamoto, Miguel Dovale Álvarez, Daikang Wei, Juan Jose Esteban Delgado, Vitali Müller, Jianjun Jia, Gerhard Heinzel

Abstract: The Laser Ranging Interferometer onboard the Gravity Recovery and Climate Experiment Follow-On mission proved the feasibility of an interferometric sensor for inter-satellite length tracking with sub-nanometer precision, establishing an important milestone for space laser interferometry and the general expectation that future gravity missions will employ heterodyne laser interferometry for satelli… ▽ More The Laser Ranging Interferometer onboard the Gravity Recovery and Climate Experiment Follow-On mission proved the feasibility of an interferometric sensor for inter-satellite length tracking with sub-nanometer precision, establishing an important milestone for space laser interferometry and the general expectation that future gravity missions will employ heterodyne laser interferometry for satellite-to-satellite ranging. In this paper we present the design of an on-axis optical bench for next-generation laser ranging which enhances the received optical power and the transmit beam divergence, enabling longer interferometer arms and relaxing the optical power requirement of the laser assembly. All design functionalities and requirements are verified by means of computer simulations. A thermal analysis is carried out to investigate the robustness of the proposed optical bench to the temperature fluctuations found in orbit. △ Less

Submitted 4 March, 2022; v1 submitted 2 February, 2022; originally announced February 2022.

Comments: 18 pages, 8 figures

Journal ref: https://www.mdpi.com/1424-8220/22/5/2070

PlomBOX -- development of a low-cost CMOS device for environmental monitoring

Authors: A. Aguilar-Arevalo, E. Alba Posse, M. Alvarez, H. Arnaldi, H. Asorey, X. Bertou, A. Colque, A. Deisting, A. Dias, J. C. D'Olivo, F. Favela-Pérez, Y. Gándola, E. A. Garcés, J. Gasulla, M. Gómez Berisso, A. González Muñoz, J. O. Guerra-Pulido, S. Gutierrez, S. Jois, J. Lipovetzky, J. Lovera, M. B. Lovino, D. J. Marín-Lámbarri, L. Marpegan, D. Martín , et al. (14 additional authors not shown)

Abstract: This paper reports on the development of a novel CMOS device employing lead-sensing bacteria to assay lead in drinking water. The objective of the PlomBOX project is to develop a low-cost sensor (£10) which can expedite access to on-demand assay methods and thus help mitigate lead intake through contaminated drinking water. The project follows three development paths: a) Certain bacteria can fluor… ▽ More This paper reports on the development of a novel CMOS device employing lead-sensing bacteria to assay lead in drinking water. The objective of the PlomBOX project is to develop a low-cost sensor (£10) which can expedite access to on-demand assay methods and thus help mitigate lead intake through contaminated drinking water. The project follows three development paths: a) Certain bacteria can fluoresce or change colour when in the presence of lead. A genetically modified strain of Escherichia coli sensitive to lead concentrations up to 10 ppb is being developed. This constitutes the biosensor that fluoresces in proportion to the presence of lead. b) Bacteria response is imaged using a microprocessor (ESP32) with a camera module. This constitutes the optical metrology component of the PlomBOX. c) Data acquisition and control of the PlomBOX is achieved through a Bluetooth connection with the PlomApp, a custom-developed mobile phone application. Data are sent from the PlomApp to a database where a bespoke automated analysis software provides a result of the lead concentration in a sample of water. This paper reports on the instrumentation challenges of developing the electronics for the PlomBOX and on the first prototype. △ Less

Submitted 10 January, 2022; originally announced January 2022.

Social Distance Characterization by means of Pedestrian Simulation

Authors: Daniel R. Parisi, Germán A. Patterson, Lucio Pagni, Agustina Osimani, Tomas Bacigalupo, Juan Godfrid, Federico M. Bergagna, Manuel Rodriguez Brizi, Pedro Momesso, Fermin L. Gomez, Jimena Lozano, Juan Martin Baader, Ignacio Ribas, Facundo P. Astiz Meyer, Miguel Di Luca, Nicolás E. Barrera, Ezequiel M. Keimel Álvarez, Maite M. Herran Oyhanarte, Pedro R. Pingarilho, Ximena Zuberbuhler, Felipe Gorostiaga

Abstract: In the present work, we study how the number of simulated clients (occupancy) affects the social distance in an ideal supermarket. For this, we account for realistic typical dimensions and process time (picking products and checkout). From the simulated trajectories, we measure events of social distance less than 2 m and its duration. Between other observables, we define a social distance coeffici… ▽ More In the present work, we study how the number of simulated clients (occupancy) affects the social distance in an ideal supermarket. For this, we account for realistic typical dimensions and process time (picking products and checkout). From the simulated trajectories, we measure events of social distance less than 2 m and its duration. Between other observables, we define a social distance coefficient that informs how many events (of a given duration) suffer each agent in the system. These kinds of outputs could be useful for building procedures and protocols in the context of a pandemic allowing to keep low health risks while setting a maximum operating capacity. △ Less

Submitted 8 September, 2020; originally announced September 2020.

Comments: 12 pages, 9 figures, to be submitted to Scientific Reports

Single-element dual-interferometer for precision inertial sensing

Authors: Yichao Yang, Kohei Yamamoto, Victor Huarcaya, Christoph Vorndamme, Daniel Penkert, Germán Fernández Barranco, Thomas S Schwarze, Juan Jose Esteban Delgado, Moritz Mehmet, Jianjun Jia, Gerhard Heinzel, Miguel Dovale Álvarez

Abstract: Tracking moving masses in several degrees of freedom with high precision and large dynamic range is a central aspect in many current and future gravitational physics experiments. Laser interferometers have been established as one of the tools of choice for such measurement schemes. Using sinusoidal phase modulation homodyne interferometry allows a drastic reduction of the complexity of the optical… ▽ More Tracking moving masses in several degrees of freedom with high precision and large dynamic range is a central aspect in many current and future gravitational physics experiments. Laser interferometers have been established as one of the tools of choice for such measurement schemes. Using sinusoidal phase modulation homodyne interferometry allows a drastic reduction of the complexity of the optical setup, a key limitation of multi-channel interferometry. By shifting the complexity of the setup to the signal processing stage, these methods enable devices with a size and weight not feasible using conventional techniques. In this paper we present the design of a novel sensor topology based on deep frequency modulation interferometry: the self-referenced single-element dual-interferometer (SEDI) inertial sensor, which takes simplification one step further by accommodating two interferometers in one optic. Using a combination of computer models and analytical methods we show that an inertial sensor with sub-picometer precision for frequencies above 10 mHz, in a package of a few cubic inches, seems feasible with our approach. Moreover we show that by combining two of these devices it is possible to reach sub-picometer precision down to 2 mHz. In combination with the given compactness, this makes the SEDI sensor a promising approach for applications in high precision inertial sensing for both next-generation space-based gravity missions employing drag-free control, and ground-based experiments employing inertial isolation systems with optical readout. △ Less

Submitted 31 August, 2020; v1 submitted 7 August, 2020; originally announced August 2020.

Comments: 18 pages, 9 figures

Tracking length and differential wavefront sensing signals from quadrant photodiodes in heterodyne interferometers with digital phase-locked loop readout

Authors: Gerhard Heinzel, Miguel Dovale Álvarez, Alvise Pizzella, Nils Brause, Juan José Esteban Delgado

Abstract: We propose a method to track signals from quadrant photodiodes (QPD) in heterodyne laser interferometers that employ digital phase-locked loops for phase readout. Instead of separately tracking the four segments from the QPD and then combining the results into length and Differential Wavefront Sensing (DWS) signals, this method employs a set of coupled tracking loops that operate directly on the c… ▽ More We propose a method to track signals from quadrant photodiodes (QPD) in heterodyne laser interferometers that employ digital phase-locked loops for phase readout. Instead of separately tracking the four segments from the QPD and then combining the results into length and Differential Wavefront Sensing (DWS) signals, this method employs a set of coupled tracking loops that operate directly on the combined length and angular signals. Benefits are increased signal-to-noise ratio in the loops and the possibility to adapt the loop bandwidths to the different dynamical behavior of the signals being tracked, which now correspond to physically meaningful observables. We demonstrate an improvement of up to 6 dB over single-segment tracking, which makes this scheme an attractive solution for applications in precision inter-satellite laser interferometry in ultra-low-light conditions. △ Less

Submitted 14 November, 2020; v1 submitted 30 April, 2020; originally announced May 2020.

Comments: 11 pages, 8 figures

Journal ref: Phys. Rev. Applied 14, 054013 (2020)

Optical suppression of tilt-to-length coupling in the LISA long-arm interferometer

Authors: M Chwalla, K Danzmann, M Dovale Álvarez, J J Esteban Delgado, G Fernández Barranco, E Fitzsimons, O Gerberding, G Heinzel, C J Killow, M Lieser, M Perreur-Lloyd, D I Robertson, J M Rohr, S Schuster, T S Schwarze, M Tröbs, G Wanner, H Ward

Abstract: The arm length and the isolation in space enable LISA to probe for signals unattainable on ground, opening a window to the sub-Hz gravitational-wave universe. The coupling of unavoidable angular spacecraft jitter into the longitudinal displacement measurement, an effect known as tilt-to-length (TTL) coupling, is critical for realizing the required sensitivity of picometer$/\sqrt{\rm{Hz}}$. An ultr… ▽ More The arm length and the isolation in space enable LISA to probe for signals unattainable on ground, opening a window to the sub-Hz gravitational-wave universe. The coupling of unavoidable angular spacecraft jitter into the longitudinal displacement measurement, an effect known as tilt-to-length (TTL) coupling, is critical for realizing the required sensitivity of picometer$/\sqrt{\rm{Hz}}$. An ultra-stable interferometer testbed has been developed in order to investigate this issue and validate mitigation strategies in a setup representative of LISA, and in this paper it is operated in the long-arm interferometer configuration. The testbed is fitted with a flat-top beam generator to simulate the beam received by a LISA spacecraft. We demonstrate a reduction of TTL coupling between this flat-top beam and a Gaussian reference beam via introducing two- and four-lens imaging systems. TTL coupling factors below $\pm 25\,μ$m/rad for beam tilts within $\pm 300\,μ$rad are obtained by careful optimization of the system. Moreover we show that the additional TTL coupling due to lateral alignment errors of elements of the imaging system can be compensated by introducing lateral shifts of the detector, and vice versa. These findings help validate the suitability of this noise-reduction technique for the LISA long-arm interferometer. △ Less

Submitted 5 June, 2020; v1 submitted 13 February, 2020; originally announced February 2020.

Comments: 13 pages, 10 figures

Journal ref: Phys. Rev. Applied 14, 014030 (2020)

Accelerator Vacuum Windows: A Review of Past Research and a Strategy for the Development of a New Design for Improved Safety and Longevity for Particle Accelerators

Authors: C. R. Ader, M. Alvarez, J. S. Batko, R. Campos, M. W. McGee, A. Watts

Abstract: Vacuum window research continues at Fermilab and this paper will examine cost effective, consistent designs which can have a huge impact on accelerator laboratories in terms of safety and cost. Issues such as the design, materials, analysis, testing and fabrication are addressed, including beam scattering plots and materials cost-benefit analysis and examining different materials which can potenti… ▽ More Vacuum window research continues at Fermilab and this paper will examine cost effective, consistent designs which can have a huge impact on accelerator laboratories in terms of safety and cost. Issues such as the design, materials, analysis, testing and fabrication are addressed, including beam scattering plots and materials cost-benefit analysis and examining different materials which can potentially be substitutes for beryllium. A previous research paper has examined current fabrication and design techniques and also failure modes at Fermi, and this paper examines previous research in addition to emerging technologies. Many different paths have been taken by HEP Laboratories throughout the world with varying success. The history of vacuum window development is extensive and not well defined, and a matrix of what research has already been done on materials and joint design for vacuum windows will be shown. This report finally includes a treatise for vacuum window technology and a view towards emerging designs and materials and discusses future advances of research such as fabrication techniques including additive manufacturing and ultrasonic welding. Further exploration into these would prove beneficial to developing vacuum windows that are safer and stronger while being more transparent to the beam. △ Less

Submitted 6 December, 2019; originally announced December 2019.

Comments: 4 pages, IPAC 2019

Report number: FERMILAB-CONF-19-200-AD

Generation of high energy laser-driven electron and proton sources with the 200 TW system VEGA 2 at the Centro de Laseres Pulsados

Authors: L. Volpe, R. Fedosejevs, G. Gatti, J. A. Pérez-Hernández, C. Méndez, J. Apiñaniz, X. Vaisseau, C. Salgado, M. Huault, S. Malko, G. Zeraouli, V. Ospina, A. Longman, D. De Luis, K. Li, O. Varela, E. García, I. Hernández, J. D. Pisonero, J. García Ajates, J. M. Alvarez, C. García, M. Rico, D. Arana, J. Hernández-Toro , et al. (1 additional authors not shown)

Abstract: The Centro de Laseres Pulsados in Salamanca Spain has recently started operation phase and the first User access period on the 6 J 30 fs 200 TW system (VEGA 2) already started at the beginning of 2018. In this paper we report on two commissioning experiments recently performed on the VEGA 2 system in preparation for the user campaign. VEGA 2 system has been tested in different configurations depen… ▽ More The Centro de Laseres Pulsados in Salamanca Spain has recently started operation phase and the first User access period on the 6 J 30 fs 200 TW system (VEGA 2) already started at the beginning of 2018. In this paper we report on two commissioning experiments recently performed on the VEGA 2 system in preparation for the user campaign. VEGA 2 system has been tested in different configurations depending on the focusing optics and targets used. One configuration (long focal length f=130 cm) is for under-dense laser-matter interaction where VEGA 2 is focused onto a low density gas-jet generating electron beams (via laser wake field acceleration mechanism) with maximum energy up to 500 MeV and an X-ray betatron source with a 10 keV critical energy. A second configuration (short focal length f=40 cm) is for over-dense laser-matter interaction where VEGA 2 is focused onto an 5 microns thick Al target generating a proton beam with a maximum energy of 10 MeV and average energy of 7-8 MeV and temperature of 2.5 MeV. In this paper we present preliminary experimental results. △ Less

Submitted 11 November, 2018; originally announced November 2018.

Bayesian inversion of a diffusion evolution equation with application to Biology

Authors: Jean-Charles Croix, Nicolas Durrande, Mauricio Alvarez

Abstract: A common task in experimental sciences is to fit mathematical models to real-world measurements to improve understanding of natural phenomenon (reverse-engineering or inverse modeling). When complex dynamical systems are considered, such as partial differential equations, this task may become challenging and ill-posed. In this work, a linear parabolic equation is considered where the objective is… ▽ More A common task in experimental sciences is to fit mathematical models to real-world measurements to improve understanding of natural phenomenon (reverse-engineering or inverse modeling). When complex dynamical systems are considered, such as partial differential equations, this task may become challenging and ill-posed. In this work, a linear parabolic equation is considered where the objective is to estimate both the differential operator coefficients and the source term at once. The Bayesian methodology for inverse problems provides a form of regularization while quantifying uncertainty as the solution is a probability measure taking in account data. This posterior distribution, which is non-Gaussian and infinite dimensional, is then summarized through a mode and sampled using a state-of-the-art Markov-Chain Monte-Carlo algorithm based on a geometric approach. After a rigorous analysis, this methodology is applied on a dataset of the post-transcriptional regulation of Kni gap gene in the early development of Drosophila Melanogaster where mRNA concentration and both diffusion and depletion rates are inferred from noisy measurement of the protein concentration △ Less

Submitted 15 June, 2018; originally announced June 2018.

Status of the warm front end of PIP-II injector test

Authors: A. Shemyakin, M. Alvarez, R. Andrews, C. Baffes, J. -P. Carneiro, A. Chen, P. F. Derwent, J. P. Edelen, D. Frolov, B. Hanna, L. Prost, A. Saini, G. Saewert, V. Scarpine, V. L. S. Sista, J. Steimel, D. Sun, A. Warner

Abstract: The Proton Improvement Plan II (PIP-II) at Fermilab is a program of upgrades to the injection complex. At its core is the design and construction of a CW compatible, pulsed H- SRF linac. To validate the concept of the front-end of such machine, a test accelerator known as PIP-II Injector Test (PIP2IT) is under construction. It includes a 10 mA DC, 30 keV H- ion source, a 2 m-long Low Energy Beam T… ▽ More The Proton Improvement Plan II (PIP-II) at Fermilab is a program of upgrades to the injection complex. At its core is the design and construction of a CW compatible, pulsed H- SRF linac. To validate the concept of the front-end of such machine, a test accelerator known as PIP-II Injector Test (PIP2IT) is under construction. It includes a 10 mA DC, 30 keV H- ion source, a 2 m-long Low Energy Beam Transport (LEBT), a 2.1 MeV CWRFQ, followed by a Medium Energy Beam Transport (MEBT) that feeds the first of 2 cryomodules increasing the beam energy to about 25 MeV, and a High Energy Beam Transport section (HEBT) that takes the beam to a dump. The ion source, LEBT, RFQ, and initial version of the MEBT have been built, installed, and commissioned. This report presents the overall status of the warm front end. △ Less

Submitted 23 March, 2018; originally announced March 2018.

Comments: 4 pp. 8th International Particle Accelerator Conference (IPAC 2017) 14-19 May 2017. Copenhagen, Denmark

Report number: Fermilab-Conf-17-146-AD

Commissioning and first results of the Electron Beam Profiler in the Main Injector at Fermilab

Authors: R. Thurman-Keup, M. Alvarez, J. Fitzgerald, C. Lundberg, P. Prieto, J. Zagel, W. Blokland

Abstract: The planned neutrino program at Fermilab requires large proton beam intensities in excess of 2 MW. Measuring the transverse profiles of these high intensity beams is challenging and often depends on non-invasive techniques. One such technique involves measuring the deflection of a probe beam of electrons with a trajectory perpendicular to the proton beam. A device such as this is already in use at… ▽ More The planned neutrino program at Fermilab requires large proton beam intensities in excess of 2 MW. Measuring the transverse profiles of these high intensity beams is challenging and often depends on non-invasive techniques. One such technique involves measuring the deflection of a probe beam of electrons with a trajectory perpendicular to the proton beam. A device such as this is already in use at the Spallation Neutron Source at ORNL and a similar device has been installed in the Main Injector at Fermilab. Commissioning of the device is in progress with the goal of having it operational by the end of the year. The status of the commissioning and initial results will be presented. △ Less

Submitted 2 March, 2018; originally announced March 2018.

Comments: 5 pp. arXiv admin note: substantial text overlap with arXiv:1511.02132

Report number: Fermilab-Conf-17-368-AD

Dimensional Analysis in Economics: A Study of the Neoclassical Economic Growth Model

Authors: Miguel Alvarez Texocotitla, M. David Alvarez Hernandez, Shani Alvarez Hernandez

Abstract: The fundamental purpose of the present research article is to introduce the basic principles of Dimensional Analysis in the context of the neoclassical economic theory, in order to apply such principles to the fundamental relations that underlay most models of economic growth. In particular, basic instruments from Dimensional Analysis are used to evaluate the analytical consistency of the Neoclass… ▽ More The fundamental purpose of the present research article is to introduce the basic principles of Dimensional Analysis in the context of the neoclassical economic theory, in order to apply such principles to the fundamental relations that underlay most models of economic growth. In particular, basic instruments from Dimensional Analysis are used to evaluate the analytical consistency of the Neoclassical economic growth model. The analysis shows that an adjustment to the model is required in such a way that the principle of dimensional homogeneity is satisfied. △ Less

Submitted 28 February, 2018; originally announced February 2018.

Phase-Space Analysis of Fluid-Dynamical Models of Traffic Flow

Authors: M David Alvarez Hernandez, Shani Alvarez Hernandez

Abstract: The present research article is devoted to the study of two fluid-dynamical traffic models and their steady states by first analyzing the kinetic-type Borsche-Kimathi-Klar model and the Navier-Stokes-type Helbing model. To fulfill this purpose, the study is made by means of a general analysis in the phase space. Phase space paths are constructed in several cases for both models, evaluating explici… ▽ More The present research article is devoted to the study of two fluid-dynamical traffic models and their steady states by first analyzing the kinetic-type Borsche-Kimathi-Klar model and the Navier-Stokes-type Helbing model. To fulfill this purpose, the study is made by means of a general analysis in the phase space. Phase space paths are constructed in several cases for both models, evaluating explicitly some phase space trajectories. Ultimately, the results of these analyses are discussed. △ Less

Submitted 14 February, 2018; originally announced February 2018.

Feasibility of near-unstable cavities for future gravitational wave detectors

Authors: Haoyu Wang, Miguel Dovale Alvarez, Christopher Collins, Daniel David Brown, Mengyao Wang, Conor M. Mow-Lowry, Sen Han, Andreas Freise

Abstract: Near-unstable cavities have been proposed as an enabling technology for future gravitational wave detectors, as their compact structure and large beam spots can reduce the coating thermal noise of the interferometer. We present a tabletop experiment investigating the behaviour of an optical cavity as it is parametrically pushed to geometrical instability. We report on the observed degeneracies of… ▽ More Near-unstable cavities have been proposed as an enabling technology for future gravitational wave detectors, as their compact structure and large beam spots can reduce the coating thermal noise of the interferometer. We present a tabletop experiment investigating the behaviour of an optical cavity as it is parametrically pushed to geometrical instability. We report on the observed degeneracies of the cavity's eigenmodes as the cavity becomes unstable and the resonance conditions become hyper-sensitive to mirror surface imperfections. A simple model of the cavity and precise measurements of the resonant frequencies allow us to characterize the stability of the cavity and give an estimate of the mirror astigmatism. The significance of these results for gravitational wave detectors is discussed, and avenues for further research are suggested. △ Less

Submitted 17 January, 2018; v1 submitted 14 November, 2017; originally announced November 2017.

Comments: 11 pages, 8 figures

Journal ref: Phys. Rev. D 97, 022001 (2018)

Fundamental Limitations of Cavity-assisted Atom Interferometry

Authors: Miguel Dovale Álvarez, Daniel D Brown, Aaron W Jones, Conor M Mow-Lowry, Haixing Miao, Andreas Freise

Abstract: Atom interferometers employing optical cavities to enhance the beam splitter pulses promise significant advances in science and technology, notably for future gravitational wave detectors. Long cavities, on the scale of hundreds of meters, have been proposed in experiments aiming to observe gravitational waves with frequencies below 1 Hz, where laser interferometers, such as LIGO, have poor sensit… ▽ More Atom interferometers employing optical cavities to enhance the beam splitter pulses promise significant advances in science and technology, notably for future gravitational wave detectors. Long cavities, on the scale of hundreds of meters, have been proposed in experiments aiming to observe gravitational waves with frequencies below 1 Hz, where laser interferometers, such as LIGO, have poor sensitivity. Alternatively, short cavities have also been proposed for enhancing the sensitivity of more portable atom interferometers. We explore the fundamental limitations of two-mirror cavities for atomic beam splitting, and establish upper bounds on the temperature of the atomic ensemble as a function of cavity length and three design parameters: the cavity g-factor, the bandwidth, and the optical suppression factor of the first and second order spatial modes. A lower bound to the cavity bandwidth is found which avoids elongation of the interaction time and maximizes power enhancement. An upper limit to cavity length is found for symmetric two-mirror cavities, restricting the practicality of long baseline detectors. For shorter cavities, an upper limit on the beam size was derived from the geometrical stability of the cavity. These findings aim to aid the design of current and future cavity-assisted atom interferometers. △ Less

Submitted 6 November, 2017; v1 submitted 6 October, 2017; originally announced October 2017.

Comments: 11 pages, 12 figures

Journal ref: Phys. Rev. A 96, 053820 (2017)

Predictability of Extreme Intensity Pulses in Optically Injected Semiconductor Lasers

Authors: Nuria Martinez Alvarez, Saurabh Borkar, Cristina Masoller

Abstract: The predictability of extreme intensity pulses emitted by an optically injected semiconductor laser is studied numerically, by using a well-known rate equation model. We show that symbolic ordinal time-series analysis allows to identify the patterns of intensity oscillations that are likely to occur before an extreme pulse. The method also gives information about patterns which are unlikely to occ… ▽ More The predictability of extreme intensity pulses emitted by an optically injected semiconductor laser is studied numerically, by using a well-known rate equation model. We show that symbolic ordinal time-series analysis allows to identify the patterns of intensity oscillations that are likely to occur before an extreme pulse. The method also gives information about patterns which are unlikely to occur before an extreme pulse. The specific patterns identified capture the topology of the underlying chaotic attractor and depend on the model parameters. The methodology proposed here can be useful for analyzing data recorded from other complex systems that generate extreme fluctuations in their output signals. △ Less

Submitted 19 June, 2017; originally announced June 2017.

Journal ref: Eur. Phys. J. Spec. Top. 226, 1971 (2017)

MicroED structure of Au146(p-MBA)57 at subatomic resolution reveals a twinned FCC cluster

Authors: Sandra Vergara, Dylan A. Lukes, Michael W. Martynowycz, Ulises Santiago, German Plascencia-Villa, Simon C. Weiss, M. Jason de la Cruz, David M. Black, Marcos M. Alvarez, Xochitl Lopez-Lozano, Christopher O. Barnes, Guowu Lin, Hans-Christian Weissker, Robert L. Whetten, Tamir Gonen, Guillermo Calero

Abstract: Solving the atomic structure of metallic clusters is fundamental to understanding their optical, electronic, and chemical properties. We report the structure of Au$_{\text{146}}$(p-MBA)$_{\text{57}}$ at subatomic resolution (0.85 Å) using electron diffraction (MicroED) and atomic resolution by X-ray diffraction. The 146 gold atoms may be decomposed into two constituent sets consisting of 119 core… ▽ More Solving the atomic structure of metallic clusters is fundamental to understanding their optical, electronic, and chemical properties. We report the structure of Au$_{\text{146}}$(p-MBA)$_{\text{57}}$ at subatomic resolution (0.85 Å) using electron diffraction (MicroED) and atomic resolution by X-ray diffraction. The 146 gold atoms may be decomposed into two constituent sets consisting of 119 core and 27 peripheral atoms. The core atoms are organized in a twinned FCC structure whereas the surface gold atoms follow a C$_{2}$ rotational symmetry about an axis bisecting the twinning plane. The protective layer of 57 p-MBAs fully encloses the cluster and comprises bridging, monomeric, and dimeric staple motifs. Au$_{\text{146}}$(p-MBA)$_{\text{57}}$ is the largest cluster observed exhibiting a bulk-like FCC structure as well as the smallest gold particle exhibiting a stacking fault. △ Less

Submitted 23 June, 2017; originally announced June 2017.

Comments: S. Vergara, D. A. Lukes, and M. W. Martynowycz contributed equally to this work. Correspondence to: [email protected], [email protected], and [email protected]

PIP-II Injector Test's Low Energy Beam Transport: Commissioning and Selected Measurements

Authors: A. Shemyakin, M. Alvarez, R. Andrews, J. -P. Carneiro, A. Chen, R. D'Arcy, B. Hanna, L. Prost, V. Scarpine, C. Wiesner

Abstract: The PIP2IT test accelerator is under construction at Fermilab. Its ion source and Low Energy Beam Transport (LEBT) in its initial (straight) configuration have been commissioned to full specification parameters. This paper introduces the LEBT design and summarizes the outcome of the commissioning activities. The PIP2IT test accelerator is under construction at Fermilab. Its ion source and Low Energy Beam Transport (LEBT) in its initial (straight) configuration have been commissioned to full specification parameters. This paper introduces the LEBT design and summarizes the outcome of the commissioning activities. △ Less

Submitted 27 April, 2017; originally announced April 2017.

Comments: 11 p

Report number: Fermilab-Conf-16-350-AD

Installation Progress At The PIP-II Injector Test At Fermilab

Authors: C. Baffes, M. Alvarez, R. Andrews, A. Chen, J. Czajkowski, P. Derwent, J. Edelen, B. Hanna, B. Hartsell, K. Kendziora, D. Mitchell, L. Prost, V. Scarpine, A. Shemyakin, J. Steimel, T. Zuchnik, A. Edelen

Abstract: A CW-compatible, pulsed H- superconducting linac "PIP-II" is being planned to upgrade Fermilab's injection complex. To validate the front-end concept, a test accelerator (The PIP-II Injector Test, formerly known as "PXIE") is under construction. The warm part of this accelerator comprises a 10 mA DC, 30 keV H- ion source, a 2 m-long Low Energy Beam Transport (LEBT), a 2.1 MeV Radio Frequency Quadr… ▽ More A CW-compatible, pulsed H- superconducting linac "PIP-II" is being planned to upgrade Fermilab's injection complex. To validate the front-end concept, a test accelerator (The PIP-II Injector Test, formerly known as "PXIE") is under construction. The warm part of this accelerator comprises a 10 mA DC, 30 keV H- ion source, a 2 m-long Low Energy Beam Transport (LEBT), a 2.1 MeV Radio Frequency Quadrupole (RFQ) capable of operation in Continuous Wave (CW) mode, and a 10 m-long Medium Energy Beam Transport (MEBT). The paper will report on the installation of the RFQ and the first sections of the MEBT and related mechanical design considerations. △ Less

Submitted 4 January, 2017; originally announced January 2017.

Comments: 4 pp

Report number: Fermilab-Conf-16-434-AD

Thermal modelling of Advanced LIGO test masses

Authors: Haoyu Wang, Carl Blair, Miguel Dovale Álvarez, Aidan Brooks, Marie F. Kasprzack, Joshua Ramette, Patrick M. Meyers, Steffen Kaufer, Brian O'Reilly, Conor M. Mow-Lowry, Andreas Freise

Abstract: High-reflectivity fused silica mirrors are at the epicentre of current advanced gravitational wave detectors. In these detectors, the mirrors interact with high power laser beams. As a result of finite absorption in the high reflectivity coatings the mirrors suffer from a variety of thermal effects that impact on the detectors performance. We propose a model of the Advanced LIGO mirrors that intro… ▽ More High-reflectivity fused silica mirrors are at the epicentre of current advanced gravitational wave detectors. In these detectors, the mirrors interact with high power laser beams. As a result of finite absorption in the high reflectivity coatings the mirrors suffer from a variety of thermal effects that impact on the detectors performance. We propose a model of the Advanced LIGO mirrors that introduces an empirical term to account for the radiative heat transfer between the mirror and its surroundings. The mechanical mode frequency is used as a probe for the overall temperature of the mirror. The thermal transient after power build-up in the optical cavities is used to refine and test the model. The model provides a coating absorption estimate of 1.5 to 2.0 ppm and estimates that 0.3 to 1.3 ppm of the circulating light is scattered on to the ring heater. △ Less

Submitted 26 April, 2017; v1 submitted 8 December, 2016; originally announced December 2016.

Comments: 14 pages, 9 figures

Switched latent force models for reverse-engineering transcriptional regulation in gene expression data

Authors: Andrés F. López-Lopera, Mauricio A. Álvarez

Abstract: To survive environmental conditions, cells transcribe their response activities into encoded mRNA sequences in order to produce certain amounts of protein concentrations. The external conditions are mapped into the cell through the activation of special proteins called transcription factors (TFs). Due to the difficult task to measure experimentally TF behaviours, and the challenges to capture thei… ▽ More To survive environmental conditions, cells transcribe their response activities into encoded mRNA sequences in order to produce certain amounts of protein concentrations. The external conditions are mapped into the cell through the activation of special proteins called transcription factors (TFs). Due to the difficult task to measure experimentally TF behaviours, and the challenges to capture their quick-time dynamics, different types of models based on differential equations have been proposed. However, those approaches usually incur in costly procedures, and they present problems to describe sudden changes in TF regulators. In this paper, we present a switched dynamical latent force model for reverse-engineering transcriptional regulation in gene expression data which allows the exact inference over latent TF activities driving some observed gene expressions through a linear differential equation. To deal with discontinuities in the dynamics, we introduce an approach that switches between different TF activities and different dynamical systems. This creates a versatile representation of transcription networks that can capture discrete changes and non-linearities We evaluate our model on both simulated data and real-data (e.g. microaerobic shift in E. coli, yeast respiration), concluding that our framework allows for the fitting of the expression data while being able to infer continuous-time TF profiles. △ Less

Submitted 25 October, 2017; v1 submitted 23 November, 2015; originally announced November 2015.

Installation status of the electron beam profiler for the Fermilab Main Injector

Authors: R. Thurman-Keup, M. Alvarez, J. Fitzgerald, C. Lundberg, P. Prieto, M. Roberts, J. Zagel, W. Blokland

Abstract: The planned neutrino program at Fermilab requires large proton beam intensities in excess of 2 MW. Measuring the transverse profiles of these high intensity beams is challenging and often depends on non-invasive techniques. One such technique involves measuring the deflection of a probe beam of electrons with a trajectory perpendicular to the proton beam. A device such as this is already in use at… ▽ More The planned neutrino program at Fermilab requires large proton beam intensities in excess of 2 MW. Measuring the transverse profiles of these high intensity beams is challenging and often depends on non-invasive techniques. One such technique involves measuring the deflection of a probe beam of electrons with a trajectory perpendicular to the proton beam. A device such as this is already in use at the Spallation Neutron Source at ORNL and the installation of a similar device is underway in the Main Injector at Fermilab. The present installation status of the electron beam profiler for the Main Injector will be discussed together with some simulations and test stand results. △ Less

Submitted 6 November, 2015; originally announced November 2015.

Comments: 5 pp

Report number: FERMILAB-CONF-15-409-AD

Pxie low energy beam transport commissioning

Authors: L. Prost, M. Alvarez, R. Andrews, J. -P. Carneiro, B. Hanna, V. Scarpine, A. Shemyakin, R. D'Arcy, C. Wiesner

Abstract: The Proton Improvement Plan II (PIP-II) at Fermilab is a program of upgrades to the injection complex. At its core is the design and construction of a CW-compatible, pulsed H- superconducting RF linac. To validate the concept of the front-end of such machine, a test accelerator (a.k.a. PXIE) is under construction. It includes a 10 mA DC, 30 KeV H- ion source, a 2 m-long Low Energy Beam Transport (… ▽ More The Proton Improvement Plan II (PIP-II) at Fermilab is a program of upgrades to the injection complex. At its core is the design and construction of a CW-compatible, pulsed H- superconducting RF linac. To validate the concept of the front-end of such machine, a test accelerator (a.k.a. PXIE) is under construction. It includes a 10 mA DC, 30 KeV H- ion source, a 2 m-long Low Energy Beam Transport (LEBT), a 2.1 MeV CW RFQ, followed by a Medium Energy Beam Transport (MEBT) that feeds the first of 2 cryomodules increasing the beam energy to ~25 MeV, and a High Energy Beam Transport section (HEBT) that takes the beam to a dump. The ion source and LEBT, which includes 3 solenoids, several clearing electrodes/collimators and a chopping system, have been built, installed, and commissioned to full specification parameters. This report presents the outcome of our commissioning activities, including phase-space measurements at the end of the beam line under various neutralization schemes obtained by changing the electrodes' biases and chopper parameters. △ Less

Submitted 4 November, 2015; originally announced November 2015.

Comments: 3 pp

Report number: FERMILAB-CONF-15-176-AD

Third generation residual gas ionization profile monitors at Fermilab

Authors: J. R. Zagel, M. Alvarez, B. Fellenz, C. Jensen, C. Lundberg, E. McCrory, D. Slimmer, R. Thurman-Keup, D. Tinsley

Abstract: The latest generation of IPMs installed in the Fermilab Main Injector and Recycler incorporate a 1 kG permanent magnet, a newly designed high-gain, rad-tolerant preamp, and a control grid to moderate the charge that is allowed to arrive on the anode pick-up strips. The control grid is intended to select a single Booster batch measurement per turn. Initially it is being used to allow for a faster t… ▽ More The latest generation of IPMs installed in the Fermilab Main Injector and Recycler incorporate a 1 kG permanent magnet, a newly designed high-gain, rad-tolerant preamp, and a control grid to moderate the charge that is allowed to arrive on the anode pick-up strips. The control grid is intended to select a single Booster batch measurement per turn. Initially it is being used to allow for a faster turn-on of a single, high-intensity cycle in either machine. The expectation is that this will extend the Micro Channel Plate lifetime, which is the high-cost consumable in the measurement system. We discuss the new design and data acquired with this system. △ Less

Submitted 9 February, 2015; originally announced February 2015.

Comments: 4 pp

Report number: FERMILAB-CONF-14-332-AD

Status of the warm front end of PXIE

Authors: A. Shemyakin, M. Alvarez, R. Andrews, C. Baffes, A. Chen, B. Hanna, L. Prost, G. Saewert, V. Scarpine, J. Steimel, D. Sun, D. Li, R. D'Arcy

Abstract: A CW-compatible, pulsed H- superconducting linac is envisaged as a possible path for upgrading Fermilab's injection complex. To validate the concept of the front- end of such a machine, a test accelerator (a.k.a. PXIE) is under construction. The warm part of this accelerator comprises a 10 mA DC, 30 keV H- ion source, a 2m-long LEBT, a 2.1 MeV CW RFQ, and a 10-m long MEBT that is capable of creati… ▽ More A CW-compatible, pulsed H- superconducting linac is envisaged as a possible path for upgrading Fermilab's injection complex. To validate the concept of the front- end of such a machine, a test accelerator (a.k.a. PXIE) is under construction. The warm part of this accelerator comprises a 10 mA DC, 30 keV H- ion source, a 2m-long LEBT, a 2.1 MeV CW RFQ, and a 10-m long MEBT that is capable of creating a large variety of bunch structures. The paper will report commissioning results of a partially assembled LEBT, status of RFQ manufacturing, and describe development of the MEBT, in particular, of elements of its chopping system. △ Less

Submitted 5 February, 2015; originally announced February 2015.

Comments: 3 pp

Report number: FERMILAB-CONF-14-301-AD

Science with the new generation high energy gamma- ray experiments

Authors: M. Alvarez, D. D'Armiento, G. Agnetta, A. Alberdi, A. Antonelli, A. Argan, P. Assis, E. A. Baltz, C. Bambi, G. Barbiellini, H. Bartko, M. Basset, D. Bastieri, P. Belli, G. Benford, L. Bergstrom, R. Bernabei, G. Bertone, A. Biland, B. Biondo, F. Bocchino, E. Branchini, M. Brigida, T. Bringmann, P. Brogueira , et al. (175 additional authors not shown)

Abstract: This Conference is the fifth of a series of Workshops on High Energy Gamma- ray Experiments, following the Conferences held in Perugia 2003, Bari 2004, Cividale del Friuli 2005, Elba Island 2006. This year the focus was on the use of gamma-ray to study the Dark Matter component of the Universe, the origin and propagation of Cosmic Rays, Extra Large Spatial Dimensions and Tests of Lorentz Invaria… ▽ More This Conference is the fifth of a series of Workshops on High Energy Gamma- ray Experiments, following the Conferences held in Perugia 2003, Bari 2004, Cividale del Friuli 2005, Elba Island 2006. This year the focus was on the use of gamma-ray to study the Dark Matter component of the Universe, the origin and propagation of Cosmic Rays, Extra Large Spatial Dimensions and Tests of Lorentz Invariance. △ Less

Submitted 4 December, 2007; originally announced December 2007.

Comments: 328 pages, 7.8Mb, Proceedings of the 5th SCINEGHE Workshop, June 18-20, 2007 http://www.roma2.infn.it/SciNeGHE07/

Journal ref: Frascati Physics Series vol.45 (2007) A.Lionetto, A.Morselli editors ISBN 978-88-86409-54-0

Aharonov-Bohm scattering on a cone

Authors: Marcos Alvarez

Abstract: The Aharonov-Bohm scattering amplitude is calculated in the context of planar gravity with localized sources which also carry a magnetic flux. These sources cause space-time to develop conical singularities at their location, thus introducing novel effects in the scattering of electrically charged particles. The behaviour of the wave function in the proximity of the classical scattering directio… ▽ More The Aharonov-Bohm scattering amplitude is calculated in the context of planar gravity with localized sources which also carry a magnetic flux. These sources cause space-time to develop conical singularities at their location, thus introducing novel effects in the scattering of electrically charged particles. The behaviour of the wave function in the proximity of the classical scattering directions is analyzed by means of an asymptotic expansion previously introduced by the author. It is found that, in contrast with the Aharonov-Bohm effect in flat space, integer values of the numerical flux can produce observable effects. △ Less

Submitted 27 April, 1998; originally announced April 1998.

Comments: 6 pages, 1 figure

Report number: SWAT-98-189