-
The role of MHD in causing impurity peaking in JET Hybrid plasmas
Authors:
T. C. Hender,
P. Buratti,
F. J. Casson,
B. Alper,
Yu. Baranov,
M. Baruzzo,
C. D. Challis,
F. Koechl,
C. Marchetto,
M. F. F. Nave,
T. Pütterich,
S. Reyes Cortes,
JET Contributors
Abstract:
In Hybrid plasma operation in JET with its ITER-like wall (JET-ILW) it is found that n>1 tearing activity can significantly enhance the rate of on-axis peaking of tungsten impurities, which in turn significantly degrades discharge performance. Core n=1 instabilities can be beneficial in removing tungsten impurities from the plasma core (e.g. sawteeth or fishbones), but can conversely also degrade…
▽ More
In Hybrid plasma operation in JET with its ITER-like wall (JET-ILW) it is found that n>1 tearing activity can significantly enhance the rate of on-axis peaking of tungsten impurities, which in turn significantly degrades discharge performance. Core n=1 instabilities can be beneficial in removing tungsten impurities from the plasma core (e.g. sawteeth or fishbones), but can conversely also degrade core confinement (particularly in combination with simultaneous n=3 activity). The nature of MHD instabilities in JET Hybrid discharges, with both its previous Carbon wall and subsequent JET-ILW, is surveyed statistically and the character of the instabilities is examined. Possible qualitative models for how the n>1 islands can enhance on-axis tungsten transport accumulation processes are presented.
△ Less
Submitted 12 October, 2015;
originally announced October 2015.
-
Contrasting H-mode behaviour with deuterium fuelling and nitrogen seeding in the all-carbon and metallic versions of JET
Authors:
G. P. Maddison,
C. Giroud,
B. Alper,
G. Arnoux,
I. Balboa,
M. N. A. Beurskens,
A. Boboc,
S. Brezinsek,
M. Brix,
M. Clever,
R. Coelho,
J. W. Coenen,
I. Coffey,
P. C. da Silva Aresta Belo,
S. Devaux,
P. Devynck,
T. Eich,
R. C. Felton,
J. Flanagan,
L. Frassinetti,
L. Garzotti,
M. Groth,
S. Jachmich,
A. Järvinen,
E. Joffrin
, et al. (26 additional authors not shown)
Abstract:
The former all-carbon wall on JET has been replaced with beryllium in the main torus and tungsten in the divertor to mimic the surface materials envisaged for ITER. Comparisons are presented between Type I H-mode characteristics in each design by examining respective scans over deuterium fuelling and impurity seeding, required to ameliorate exhaust loads both in JET at full capability and in ITER.
The former all-carbon wall on JET has been replaced with beryllium in the main torus and tungsten in the divertor to mimic the surface materials envisaged for ITER. Comparisons are presented between Type I H-mode characteristics in each design by examining respective scans over deuterium fuelling and impurity seeding, required to ameliorate exhaust loads both in JET at full capability and in ITER.
△ Less
Submitted 11 June, 2014;
originally announced June 2014.
-
Energetic particle instabilities in fusion plasmas
Authors:
S E Sharapov,
B Alper,
H L Berk,
D N Borba,
B N Breizman,
C D Challis,
I G J Classen,
E M Edlund,
J Eriksson,
A Fasoli,
E D Fredrickson,
G Y Fu,
M Garcia-Munoz,
T Gassner,
K Ghantous,
V Goloborodko,
N N Gorelenkov,
M P Gryaznevich,
S Hacquin,
W W Heidbrink,
C Hellesen,
V G Kiptily,
G J Kramer,
P Lauber,
M K Lilley
, et al. (19 additional authors not shown)
Abstract:
Remarkable progress has been made in diagnosing energetic particle instabilities on present-day machines and in establishing a theoretical framework for describing them. This overview describes the much improved diagnostics of Alfven instabilities and modelling tools developed world-wide, and discusses progress in interpreting the observed phenomena. A multi-machine comparison is presented giving…
▽ More
Remarkable progress has been made in diagnosing energetic particle instabilities on present-day machines and in establishing a theoretical framework for describing them. This overview describes the much improved diagnostics of Alfven instabilities and modelling tools developed world-wide, and discusses progress in interpreting the observed phenomena. A multi-machine comparison is presented giving information on the performance of both diagnostics and modelling tools for different plasma conditions outlining expectations for ITER based on our present knowledge.
△ Less
Submitted 31 October, 2013;
originally announced October 2013.
-
Time-Resonant Tokamak Plasma Edge Instabilities?
Authors:
A. J. Webster,
R. O. Dendy,
F. A. Calderon,
S. C. Chapman,
E. Delabie,
D. Dodt,
R. Felton,
T. N. Todd,
F. Maviglia,
J. Morris,
V. Riccardo,
B. Alper,
S Brezinsek,
P. Coad,
J. Likonen,
M. Rubel,
JET EFDA Contributors
Abstract:
For a two week period during the Joint European Torus (JET) 2012 experimental campaign, the same high confinement plasma was repeated 151 times. The dataset was analysed to produce a probability density function (pdf) for the waiting times between edge-localised plasma instabilities ("ELMS"). The result was entirely unexpected. Instead of a smooth single peaked pdf, a succession of 4-5 sharp maxim…
▽ More
For a two week period during the Joint European Torus (JET) 2012 experimental campaign, the same high confinement plasma was repeated 151 times. The dataset was analysed to produce a probability density function (pdf) for the waiting times between edge-localised plasma instabilities ("ELMS"). The result was entirely unexpected. Instead of a smooth single peaked pdf, a succession of 4-5 sharp maxima and minima uniformly separated by 7-8 millisecond intervals was found. Here we explore the causes of this newly observed phenomenon, and conclude that it is either due to a self-organised plasma phenomenon or an interaction between the plasma and a real-time control system. If the maxima are a result of "resonant" frequencies at which ELMs can be triggered more easily, then future ELM control techniques can, and probably will, use them. Either way, these results demand a deeper understanding of the ELMing process.
△ Less
Submitted 1 October, 2013;
originally announced October 2013.
-
The effect of ITER-like wall on runaway electron generation in JET
Authors:
G. Papp,
T. Fülöp,
T. Fehér,
P. C. de Vries,
V. Riccardo,
C. Reux,
M. Lehnen,
V. Kiptily,
V. V. Plyusnin,
B. Alper,
JET EFDA contributors
Abstract:
This paper investigates the effect of the ITER-like wall (ILW) on runaway electron (RE) generation through a comparative study of similar slow argon injection JET disruptions, performed with different wall materials. In the carbon wall case, a runaway electron plateau is observed, while in the ITER-like wall case, the current quench is slower and the runaway current is negligibly small. The aim of…
▽ More
This paper investigates the effect of the ITER-like wall (ILW) on runaway electron (RE) generation through a comparative study of similar slow argon injection JET disruptions, performed with different wall materials. In the carbon wall case, a runaway electron plateau is observed, while in the ITER-like wall case, the current quench is slower and the runaway current is negligibly small. The aim of the paper is to shed light on the reason for these differences by detailed numerical modelling to study which factors affected the RE formation. The post-disruption current profile is calculated by a one-dimensional model of electric field, temperature and runaway current taking into account the impurity injection. Scans of various impurity contents are performed and agreement with the experimental scenarios is obtained for reasonable argon- and wall impurity contents. Our modelling shows that the reason for the changed RE dynamics is a complex, combined effect of the differences in plasma parameter profiles, the radiation characteristics of beryllium and carbon, and the difference of the injected argon amount. These together lead to a significantly higher Dreicer generation rate in the carbon wall case, which is less prone to be suppressed by RE loss mechanisms. The results indicate that the differences are greatly reduced above ~50% argon content, suggesting that significant RE current is expected in future massive gas injection experiments on both JET and ITER.
△ Less
Submitted 12 August, 2013;
originally announced August 2013.
-
Identifying low-dimensional dynamics in Type-I edge-localised-mode processes in JET plasmas
Authors:
F. A. Calderon,
R. O. Dendy,
S. C. Chapman,
A. J. Webster,
B. Alper,
R. M. Nicol,
JET EFDA Contributors
Abstract:
Edge localised mode (ELM) measurements from reproducibly similar plasmas in the Joint European Torus (JET) tokamak, which differ only in their gas puffing rate, are analysed in terms of the pattern in the sequence of inter-ELM time intervals. It is found that the category of ELM defined empirically as Type I - typically more regular, less frequent, and having larger amplitude than other ELM types…
▽ More
Edge localised mode (ELM) measurements from reproducibly similar plasmas in the Joint European Torus (JET) tokamak, which differ only in their gas puffing rate, are analysed in terms of the pattern in the sequence of inter-ELM time intervals. It is found that the category of ELM defined empirically as Type I - typically more regular, less frequent, and having larger amplitude than other ELM types - embraces substantially different ELMing processes. By quantifying the structure in the sequence of inter-ELM time intervals using delay time plots, we reveal transitions between distinct phase space dynamics, implying transitions between distinct underlying physical processes. The control parameter for these transitions between these different ELMing processes is the gas puffing rate.
△ Less
Submitted 8 April, 2013;
originally announced April 2013.
-
Large-scale drifts observed on electron temperature measurements on JET plasmas
Authors:
Thomas Gerbaud,
Stefan Schmuck,
Barry Alper,
Kieran Beausang,
Marc Beurskens,
Joanne Flanagan,
Mark Kempenaars,
Antoine Sirinelli,
Mikhail Maslov,
Guilhem Dif-Pradalier,
JET EFDA Contributors
Abstract:
Between 1995 and 2009, electron temperature (Te) measurements of more than 15000 plasmas produced in the Joint European Torus (JET) have been carefully reviewed using the two main diagnostics available over this time period: Michelson interferometer and Thomson scattering systems. Long term stability of JET Te is experimentaly observed by defining the ECE TS ratio as the ratio of central Te measur…
▽ More
Between 1995 and 2009, electron temperature (Te) measurements of more than 15000 plasmas produced in the Joint European Torus (JET) have been carefully reviewed using the two main diagnostics available over this time period: Michelson interferometer and Thomson scattering systems. Long term stability of JET Te is experimentaly observed by defining the ECE TS ratio as the ratio of central Te measured by Michelson and LIDAR.
This paper, based on a careful review of Te measurement from 15 years of JET plasmas, concludes that JET Te exhibits a 15-20% effective uncertainty mostly made of large-scale temporal drifts, and an overall uncertainty of 16-22%.
Variations of 18 plasma parameters are checked in another data set, made of a "reference data set" made of ohmic pulses as similar as possible between 1998 and 2009. Time drifts of ECE TS ratios appear to be mostly disconnected from the variations observed on these 18 plasma parameters, except for the very low amplitude variations of the field which are well correlated with off-plasma variations of a 8-channel integrator module used for measuring many magnetic signals from JET.
From mid-2002 to 2009, temporal drifts of ECE TS ratios are regarded as calibration drifts possibly caused by unexpected sensitivity to unknown parameters; the external temperature on JET site might be the best parameter suspected so far.
Off-plasma monitoring of MI made of calibration performed in the laboratory are reported and do not appear to be clearly correlated with drifts of ECE TS ratio and variations of magnetics signals integrators. Comparison of estimations of plasma thermal energy for purely Ohmic and NBI-only plasmas does not provide any definite information on the accuracy of \mi or \lidar measurements.
Whatever causes these Te drifts, this experimental issue is regarded as crucial for JET data quality.
△ Less
Submitted 14 May, 2012;
originally announced May 2012.
-
Observation of confined current ribbon in JET plasmas
Authors:
E. R. Solano,
P. J. Lomas,
B. Alper,
G. S. Xu,
Y. Andrew,
G. Arnoux,
A. Boboc,
L. Barrera,
P. Belo,
M. N. A. Beurskens,
M. Brix,
K. Crombe,
E. de la Luna,
S. Devaux,
T. Eich,
S. Gerasimov,
C. Giroud,
D. Harting,
D. Howell,
A. Huber,
G. Kocsis,
A. Korotkov,
A. Lopez-Fraguas,
M. F. F. Nave,
E. Rachlew
, et al. (7 additional authors not shown)
Abstract:
we report the identification of a localised current structure inside the JET plasma. It is a field aligned closed helical ribbon, carrying current in the same direction as the background current profile (co-current), rotating toroidally with the ion velocity (co-rotating). It appears to be located at a flat spot in the plasma pressure profile, at the top of the pedestal. The structure appears sp…
▽ More
we report the identification of a localised current structure inside the JET plasma. It is a field aligned closed helical ribbon, carrying current in the same direction as the background current profile (co-current), rotating toroidally with the ion velocity (co-rotating). It appears to be located at a flat spot in the plasma pressure profile, at the top of the pedestal. The structure appears spontaneously in low density, high rotation plasmas, and can last up to 1.4 s, a time comparable to a local resistive time. It considerably delays the appearance of the first ELM.
△ Less
Submitted 30 October, 2009;
originally announced October 2009.
