-
Self-consistent GW via conservation of spectral moments
Authors:
Oliver J. Backhouse,
Marcus K. Allen,
Charles C. J. Scott,
George H. Booth
Abstract:
We expand on a recently introduced alternate framework for $GW$ simulation of charged excitations [Scott et. al., J. Chem. Phys., 158, 124102 (2023)], based around the conservation of directly computed spectral moments of the GW self-energy. Featuring a number of desirable formal properties over other implementations, we also detail efficiency improvements and a parallelism strategy, resulting in…
▽ More
We expand on a recently introduced alternate framework for $GW$ simulation of charged excitations [Scott et. al., J. Chem. Phys., 158, 124102 (2023)], based around the conservation of directly computed spectral moments of the GW self-energy. Featuring a number of desirable formal properties over other implementations, we also detail efficiency improvements and a parallelism strategy, resulting in an implementation with a demonstrable similar scaling to an established Hartree--Fock code, with only an order of magnitude increase in cost. We also detail the applicability of a range of self-consistent $GW$ variants within this framework, including a scheme for full self-consistency of all dynamical variables, whilst avoiding the Matsubara axis or analytic continuation, allowing formal convergence at zero temperature. By investigating a range of self-consistency protocols over the GW100 molecular test set, we find that a little-explored self-consistent variant based around a simpler coupled chemical potential and Fock matrix optimization to be the most accurate self-consistent $GW$ approach. Additionally, we validate recently observed evidence that Tamm--Dancoff based screening approximations within $GW$ lead to higher accuracy than traditional random phase approximation screening over these molecular test cases. Finally, we consider the Chlorophyll A molecule, finding agreement with experiment within the experimental uncertainty, and a description of the full-frequency spectrum of charged excitations.
△ Less
Submitted 24 April, 2025;
originally announced April 2025.
-
Equivalent Circuit Modeling and Design of a Reconfigurable Loaded Dogbone Metasurface Element
Authors:
Christopher T. Howard,
William D. Hunt,
Kenneth W. Allen
Abstract:
The accelerating trend of active metasurfaces -- such as those incorporating non-Foster matching, programmable control, or space-time modulation -- adds complexity to the computational electromagnetic (CEM) simulation landscape. In this work, we present an equivalent circuit model (ECM) for a particular periodic array element -- the dogbone element -- that incorporates an arbitrary sub-cell electr…
▽ More
The accelerating trend of active metasurfaces -- such as those incorporating non-Foster matching, programmable control, or space-time modulation -- adds complexity to the computational electromagnetic (CEM) simulation landscape. In this work, we present an equivalent circuit model (ECM) for a particular periodic array element -- the dogbone element -- that incorporates an arbitrary sub-cell electronic circuit. The ECM is capable of predicting the overall surface impedance with any changes in the circuit's impedance. Three full-wave CEM simulations fully determine the EC, and the scattering parameters computed from the ECM for an embedded circuit, however complex, should be substantially similar to those produced by the full-wave code. With metasurfaces for which it is possible to obtain an ECM by this method, the reflection or transmission behavior of the surface under varying circuit conditions can be computed quickly without need of any further full-wave solutions. After highlighting the importance of fully characterizing parasitics in embedded components, we apply the method to the design of a varactor-based tunable metasurface, which upon fabrication and focused beam measurement demonstrates excellent model-measure agreement.
△ Less
Submitted 9 December, 2024;
originally announced December 2024.
-
Multimodal Effective Permittivity Model for Metasurfaces Embedded in Layered Media
Authors:
Christopher T. Howard,
William D. Hunt,
Kenneth W. Allen
Abstract:
The dielectric layers surrounding a metasurface have a large impact on its frequency and angular response. The notion of effective permittivity captures this dependence by suggesting that a layered dielectric environment will perturb metasurface resonances in the same manner as an infinite environment of that effective permittivity. A model for effective permittivity is presented in this work. In…
▽ More
The dielectric layers surrounding a metasurface have a large impact on its frequency and angular response. The notion of effective permittivity captures this dependence by suggesting that a layered dielectric environment will perturb metasurface resonances in the same manner as an infinite environment of that effective permittivity. A model for effective permittivity is presented in this work. In contrast to previous empirically derived models, this multi-term model is a robust approximation based on the modal expansion of fields at the metasurface. A simple dipole metasurface array is simulated to demonstrate the accuracy of the model, which is shown to be improved over other models. Finally, we show that it is possible for dielectric layers to produce an effective permeability different than unity, which must be considered in conjunction with higher-order equivalent circuit modeling to effectively predict metasurface impedance variation.
△ Less
Submitted 23 October, 2024;
originally announced October 2024.
-
Photodetector Focal Plane Arrays Integrated with Silicon Micropyramidal Structures in MWIR
Authors:
Grant W. Bidney,
Joshua M. Duran,
Gamini Ariyawansa,
Igor Anisimov,
Kenneth W. Allen,
Vasily N. Astratov
Abstract:
Light-concentrating truncated Si micropyramidal arrays with 54.7 degree sidewall angles were successfully integrated with PtSi Schottky barrier photodetectors. Four different devices consisting of 10 x 10 photodetectors with 60 um pitch combined in parallel were tested, where significant enhancement capability was demonstrated by the Si micropyramids. The device consisting of one hundred 22 um squ…
▽ More
Light-concentrating truncated Si micropyramidal arrays with 54.7 degree sidewall angles were successfully integrated with PtSi Schottky barrier photodetectors. Four different devices consisting of 10 x 10 photodetectors with 60 um pitch combined in parallel were tested, where significant enhancement capability was demonstrated by the Si micropyramids. The device consisting of one hundred 22 um square detectors monolithically integrated with the light-concentrating micropyramidal array displayed signal enhancement of up to 4 times compared to the same size 22 um square photodetector device without the light concentrators.
△ Less
Submitted 26 September, 2023;
originally announced September 2023.
-
Focusing and Diffraction of Light by Periodic Si Micropyramidal Arrays
Authors:
Grant W. Bidney,
Amstrong R. Jean,
Joshua M. Duran,
Gamini Ariyawansa,
Igor Anisimov,
Kenneth W. Allen,
Vasily N. Astratov
Abstract:
This research was devoted to modeling of the optical properties of Si micropyramids aimed at designing optimal structures for applications as light concentrators in mid-wave infrared (MWIR) focal place arrays (FPAs). It is shown that completely different optical properties of such structures can be realized using two types of boundary conditions (BCs): i) periodical and ii) perfectly matched layer…
▽ More
This research was devoted to modeling of the optical properties of Si micropyramids aimed at designing optimal structures for applications as light concentrators in mid-wave infrared (MWIR) focal place arrays (FPAs). It is shown that completely different optical properties of such structures can be realized using two types of boundary conditions (BCs): i) periodical and ii) perfectly matched layer. The first type (periodical BC) allowed us to describe the Talbot effect under plane wave coherent illumination conditions. This effect was experimentally demonstrated in the proposed structures. The second type (perfectly matched layer BC) allows describing the optical properties of individual micropyramids concentrating or focusing light on the photodetector. The optimal geometries of micropyramids required for maximizing the intensity of photonic nanojets emerging from their truncated tips are determined.
△ Less
Submitted 26 September, 2023;
originally announced September 2023.
-
Level set methods for gradient-free optimization of metasurface arrays
Authors:
Alex Saad-Falcon,
Christopher Howard,
Justin Romberg,
Kenneth Allen
Abstract:
Global optimization techniques are increasingly preferred over human-driven methods in the design of electromagnetic structures such as metasurfaces, and careful construction and parameterization of the physical structure is critical in ensuring computational efficiency and convergence of the optimization algorithm to a globally optimal solution. While many design variables in physical systems tak…
▽ More
Global optimization techniques are increasingly preferred over human-driven methods in the design of electromagnetic structures such as metasurfaces, and careful construction and parameterization of the physical structure is critical in ensuring computational efficiency and convergence of the optimization algorithm to a globally optimal solution. While many design variables in physical systems take discrete values, optimization algorithms often benefit from a continuous design space. This work demonstrates the use of level set functions as a continuous basis for designing material distributions for metasurface arrays and introduces an improved parameterization which is termed the periodic level set function. We explore the use of alternate norms in the definition of the level set function and define a new pseudo-inverse technique for upsampling basis coefficients with these norms. The level set method is compared to the fragmented parameterization and shows improved electromagnetic responses for two dissimilar cost functions: a narrowband objective and a broadband objective. Finally, we manufacture an optimized level set metasurface and measure its scattering parameters to demonstrate real-world performance.
△ Less
Submitted 14 July, 2023;
originally announced July 2023.
-
Physics reach of a low threshold scintillating argon bubble chamber in coherent elastic neutrino-nucleus scattering reactor experiments
Authors:
L. J. Flores,
Eduardo Peinado,
E. Alfonso-Pita,
K. Allen,
M. Baker,
E. Behnke,
M. Bressler,
K. Clark,
R. Coppejans,
C. Cripe,
M. Crisler,
C. E. Dahl,
A. de St. Croix,
D. Durnford,
P. Giampa,
O. Harris,
P. Hatch,
H. Hawley,
C. M. Jackson,
Y. Ko,
C. Krauss,
N. Lamb,
M. Laurin,
I. Levine,
W. H. Lippincott
, et al. (9 additional authors not shown)
Abstract:
The physics reach of a low threshold (100 eV) scintillating argon bubble chamber sensitive to Coherent Elastic neutrino-Nucleus Scattering (CE$ν$NS) from reactor neutrinos is studied. The sensitivity to the weak mixing angle, neutrino magnetic moment, and a light $Z'$ gauge boson mediator are analyzed. A Monte Carlo simulation of the backgrounds is performed to assess their contribution to the sig…
▽ More
The physics reach of a low threshold (100 eV) scintillating argon bubble chamber sensitive to Coherent Elastic neutrino-Nucleus Scattering (CE$ν$NS) from reactor neutrinos is studied. The sensitivity to the weak mixing angle, neutrino magnetic moment, and a light $Z'$ gauge boson mediator are analyzed. A Monte Carlo simulation of the backgrounds is performed to assess their contribution to the signal. The analysis shows that world-leading sensitivities are achieved with a one-year exposure for a 10 kg chamber at 3 m from a 1 MW$_{th}$ research reactor or a 100 kg chamber at 30 m from a 2000 MW$_{th}$ power reactor. Such a detector has the potential to become the leading technology to study CE$ν$NS using nuclear reactors.
△ Less
Submitted 26 May, 2021; v1 submitted 21 January, 2021;
originally announced January 2021.
-
Reconfigurable Electromagnetic Structures: X-Band and Beyond
Authors:
Kenneth W. Allen,
Joshua M. Kovitz
Abstract:
Developing reconfigurable millimeter-wave (mmWave) antennas and devices is an outstanding challenge, with switch technologies being a primary impediment. Recently, it has been shown that vanadium dioxide (VO2), a thermochromic material whose resistance changes with temperature, could provide a path forward in developing reconfigurable mmWave devices. As an initial step towards this vision, we inve…
▽ More
Developing reconfigurable millimeter-wave (mmWave) antennas and devices is an outstanding challenge, with switch technologies being a primary impediment. Recently, it has been shown that vanadium dioxide (VO2), a thermochromic material whose resistance changes with temperature, could provide a path forward in developing reconfigurable mmWave devices. As an initial step towards this vision, we investigate the integration of VO2 switches in reconfigurable components at 15 GHz. In particular, a frequency reconfigurable antenna and a reconfigurable phase shifter are shown. The low loss and minimal parasitics of VO2 technology have the potential to enable devices at 15 GHz and beyond.
△ Less
Submitted 2 March, 2019;
originally announced June 2019.
-
Aa Unbalanced Feed Design for Wideband Phased Arrays
Authors:
David W. Landgren,
Daniel J. P. Dykes,
Kenneth W. Allen
Abstract:
In this work, a planar phased array antenna was engineered with ultra-wideband (UWB) performance that covers portions of the L-, S-, and C-bands. The unit cell design contains a driven layer that is directly connected to a single coaxial feed and a parasitic layer located above the driven layer separated by free space. This design does not require a balun or any vias between the antenna ground pla…
▽ More
In this work, a planar phased array antenna was engineered with ultra-wideband (UWB) performance that covers portions of the L-, S-, and C-bands. The unit cell design contains a driven layer that is directly connected to a single coaxial feed and a parasitic layer located above the driven layer separated by free space. This design does not require a balun or any vias between the antenna ground plane and the driven layer, resulting in a simple antenna stack-up consisting of only planar layers, aside from the feed structure. As a consequence, the complexity, and potentially sensitivity to mechanical tolerances, is reduced. The simulated results of this unbalanced phased array are discussed and experimentally validated.
△ Less
Submitted 14 June, 2017;
originally announced June 2017.
-
Whispering gallery mode hybridization in photonic molecules
Authors:
Yangcheng Li,
Farzaneh Abolmaali,
Kenneth W. Allen,
Nicholaos I. Limberopoulos,
Augustine Urbas,
Yury Rakovich,
Alexey V. Maslov,
Vasily N. Astratov
Abstract:
This work takes inspiration from chemistry where the spectral characteristics of the molecules are determined by hybridization of electronic states evolving from the individual atomic orbitals. Based on analogy between quantum mechanics and the classical electrodynamics, we sorted dielectric microspheres with almost identical positions of their whispering gallery mode (WGM) resonances. Using these…
▽ More
This work takes inspiration from chemistry where the spectral characteristics of the molecules are determined by hybridization of electronic states evolving from the individual atomic orbitals. Based on analogy between quantum mechanics and the classical electrodynamics, we sorted dielectric microspheres with almost identical positions of their whispering gallery mode (WGM) resonances. Using these microspheres as classical photonic atoms, we assembled them in a wide range of structures including linear chains and planar photonic molecules. We studied WGM hybridization effects in such structures using side coupling by tapered microfibers as well as finite difference time domain modeling. We demonstrated that the patterns of WGM spectral splitting are representative of the symmetry, number of constituting atoms and topology of the photonic molecules which in principle can be viewed as "spectral signatures" of various molecules. We also show new ways of controlling WGM coupling constants in such molecules. Excellent agreement was found between measured transmission spectra and spectral signatures of photonic molecules predicted by simulation.
△ Less
Submitted 4 March, 2017;
originally announced March 2017.
-
Label-Free Nanoscopy with Contact Microlenses: Super-Resolution Mechanisms and Limitations
Authors:
Vasily N. Astratov,
Farzaneh Abolmaali,
Aaron Brettin,
Kenneth W. Allen,
Alexey V. Maslov,
Nicholaos I. Limberopoulos,
Dennis E. Walker Jr.,
Augustine M. Urbas
Abstract:
Despite all the success with developing super-resolution imaging techniques, the Abbe limit poses a severe fundamental restriction on the resolution of far-field imaging systems based on diffraction of light. Imaging with contact microlenses, such as microspheres or microfibers, can increase the resolution by a factor of two beyond the Abbe limit. The theoretical mechanisms of these methods are de…
▽ More
Despite all the success with developing super-resolution imaging techniques, the Abbe limit poses a severe fundamental restriction on the resolution of far-field imaging systems based on diffraction of light. Imaging with contact microlenses, such as microspheres or microfibers, can increase the resolution by a factor of two beyond the Abbe limit. The theoretical mechanisms of these methods are debated in the literature. In this work, we focus on the recently expressed idea that optical coupling between closely spaced nanoscale objects can lead to the formation of the modes that drastically impact the imaging properties. These coupling effects emerge in nanoplasmonic or nanocavity clusters, photonic molecules, or various arrays under resonant excitation conditions. The coherent nature of imaging processes is key to understanding their physical mechanisms. We used a cluster of point dipoles, as a simple model system, to study and compare the consequences of coherent and incoherent imaging. Using finite difference time domain modeling, we show that the coherent images are full of artefacts. The out-of-phase oscillations produce zero-intensity points that can be observed with practically unlimited resolution (determined by the noise). We showed that depending on the phase distribution, the nanoplasmonic cluster can appear with the arbitrary shape, and such images were obtained experimentally.
△ Less
Submitted 16 June, 2016;
originally announced June 2016.
-
iQ Cavity for Material Permittivity Characterization
Authors:
Kenneth W. Allen,
Mark M. Scott
Abstract:
We present an X-band waveguide (WR90) and UHF waveguide (WR1500) measurement method that permits the extraction of the complex permittivity for low dielectric loss tangent material specimen. The extraction method relies on computational electromagnetic (CEM) simulations; coupled with a genetic algorithm; to fit the experimental measurement and the simulated transmitted scattering parameter (S21) o…
▽ More
We present an X-band waveguide (WR90) and UHF waveguide (WR1500) measurement method that permits the extraction of the complex permittivity for low dielectric loss tangent material specimen. The extraction method relies on computational electromagnetic (CEM) simulations; coupled with a genetic algorithm; to fit the experimental measurement and the simulated transmitted scattering parameter (S21) of the TE10 mode through the waveguide with the material specimen partially filling the cross-section. This technique provides the material measurement community with the ability to accurately extract material properties of low-loss material specimen.
△ Less
Submitted 20 April, 2016;
originally announced April 2016.
-
An X-Band Waveguide Measurement Technique for the Accurate Characterization of Materials with Low Dielectric Loss Permittivity
Authors:
Kenneth W. Allen,
Mark M. Scott,
David R. Reid,
Jeffrey A. Bean,
Jeremy D. Ellis,
Andrew P. Morris,
Jeramy M. Marsh
Abstract:
In this work, we present a new X-band waveguide (WR90) measurement method that permits the broadband characterization of the complex permittivity for low dielectric loss tangent material specimens with improved accuracy. An electrically-long polypropylene specimen that partially fills the cross-section is inserted into the waveguide and the transmitted scattering parameter (S21) is measured. The e…
▽ More
In this work, we present a new X-band waveguide (WR90) measurement method that permits the broadband characterization of the complex permittivity for low dielectric loss tangent material specimens with improved accuracy. An electrically-long polypropylene specimen that partially fills the cross-section is inserted into the waveguide and the transmitted scattering parameter (S21) is measured. The extraction method relies on computational electromagnetic simulations, coupled with a genetic algorithm, to match the experimental S21 measurement. The sensitivity of the technique to sample length was explored by simulating specimen lengths from 2.54 to 15.24 cm, in 2.54 cm increments. Analysis of our simulated data predicts the technique will have the sensitivity to measure loss tangent values on the order of 10e-3 for materials such as polymers with relatively low real permittivity values. The ability to accurately characterize low-loss dielectric material specimens of polypropylene is demonstrated experimentally. The method was validated by excellent agreement with a free-space focused-beam system measurement of a polypropylene sheet. This technique provides the material measurement community with the ability to accurately extract material properties of low-loss material specimen over the entire X-band range. This technique could easily be extended to other frequency bands.
△ Less
Submitted 19 April, 2016;
originally announced April 2016.
-
Permittivity and permeability determination for high index specimens using partially filled shorted rectangular waveguides
Authors:
Mark M. Scott,
Daniel L. Faircloth,
Jeffrey A. Bean,
Kenneth W. Allen
Abstract:
A method for determining the permittivity and permeability for specimens with high refractive index and variable shape is investigated. The method extracts the permeability and permittivity tensor elements from reflection measurements made with a partially-filled shorted rectangular waveguide on an electrically small specimen. Measurements are performed for two isotropic, heavily loaded coaxial ma…
▽ More
A method for determining the permittivity and permeability for specimens with high refractive index and variable shape is investigated. The method extracts the permeability and permittivity tensor elements from reflection measurements made with a partially-filled shorted rectangular waveguide on an electrically small specimen. Measurements are performed for two isotropic, heavily loaded coaxial magnetic composites. Supporting measurements from a stripline cavity and coaxial airline are used to validate the method. The results demonstrate the methods ability to handle frequency dispersive and high index materials.
△ Less
Submitted 28 January, 2016;
originally announced January 2016.
-
Movable thin films with embedded high-index microspheres for super-resolution microscopy
Authors:
Kenneth W. Allen,
Navid Farahi,
Yangcheng Li,
Nicholaos I. Limberopoulos,
Dennis E. Walker Jr.,
Augustine M. Urbas,
Vladimir Liberman,
Vasily N. Astratov
Abstract:
Microsphere-assisted imaging emerged as a surprisingly simple way of achieving optical super-resolution imaging. In this work, we use movable PDMS thin films with embedded high-index barium titanate glass microspheres a sample scanning capability was developed, thus removing the main limitation of this technology based on its small field-of-view.
Microsphere-assisted imaging emerged as a surprisingly simple way of achieving optical super-resolution imaging. In this work, we use movable PDMS thin films with embedded high-index barium titanate glass microspheres a sample scanning capability was developed, thus removing the main limitation of this technology based on its small field-of-view.
△ Less
Submitted 23 August, 2015;
originally announced August 2015.
-
Waveguide, Photodetector, and Imaging Applications of Microspherical Photonics
Authors:
Kenneth W. Allen Jr
Abstract:
Dielectric microspheres with diameters on the order of several wavelengths of light have attracted increasing attention from the photonics community due to their ability to produce extraordinarily tightly focused beams termed photonic nanojets, to be used as microlenses for achieving optical super-resolution or to develop sensors based on whispering-gallery mode resonances. In this dissertation, w…
▽ More
Dielectric microspheres with diameters on the order of several wavelengths of light have attracted increasing attention from the photonics community due to their ability to produce extraordinarily tightly focused beams termed photonic nanojets, to be used as microlenses for achieving optical super-resolution or to develop sensors based on whispering-gallery mode resonances. In this dissertation, we study the optical properties of more complicated structures formed by multiple spheres which can be assembled as linear chains, clusters or arrays, integrated with waveguides or embedded inside other materials to achieve new optical properties or device functionalities.
△ Less
Submitted 11 March, 2015;
originally announced March 2015.
-
Super-Resolution Imaging by Arrays of High-Index Spheres Embedded in Transparent Matrices
Authors:
Kenneth W. Allen,
Navid Farahi,
Yangcheng Li,
Nicholaos I. Limberopoulos,
Dennis E. Walker Jr.,
Augustine M. Urbas,
Vasily N. Astratov
Abstract:
We fabricated thin-films made from polydimethylsiloxane (PDMS) with embedded high-index (n~1.9-2.2) microspheres for super-resolution imaging applications. To control the position of microspheres, such films can be translated along the surface of the nanoplasmonic structure to be imaged. Microsphere-assisted imaging, through these matrices, provided lateral resolution of ~λ/7 in nanoplasmonic dime…
▽ More
We fabricated thin-films made from polydimethylsiloxane (PDMS) with embedded high-index (n~1.9-2.2) microspheres for super-resolution imaging applications. To control the position of microspheres, such films can be translated along the surface of the nanoplasmonic structure to be imaged. Microsphere-assisted imaging, through these matrices, provided lateral resolution of ~λ/7 in nanoplasmonic dimer arrays with an illuminating wavelength λ=405 nm. Such thin films can be used as contact optical components to boost the resolution capability of conventional microscopes.
△ Less
Submitted 4 December, 2014;
originally announced December 2014.
-
The Software Anatomy of a Flexible Accelerator Simulation Engine
Authors:
Nicholas D. Pattengale,
Christopher K. Allen
Abstract:
A modular, maintainable and extensible particle beam simulation architecture is presented. Design considerations for single particle, multi particle, and rms envelope simulations (in two and three dimensions) are outlined. Envelope simulation results have been validated against Trace3D. Hybridization with a physics-centric contol-system abstraction provides a convenient environment for rapid dep…
▽ More
A modular, maintainable and extensible particle beam simulation architecture is presented. Design considerations for single particle, multi particle, and rms envelope simulations (in two and three dimensions) are outlined. Envelope simulation results have been validated against Trace3D. Hybridization with a physics-centric contol-system abstraction provides a convenient environment for rapid deployment of applications employing model-reference control strategies.
△ Less
Submitted 24 July, 2002;
originally announced July 2002.
-
SNS Application Programming Plan
Authors:
C. M. Chu,
J. Galambos,
J. Wei,
C. K. Allen,
P. McGehee
Abstract:
The architecture for Spallation Neutron Source accelerator physics application programs is presented. These high level applications involve processing and managing information from the diagnostic instruments, the machine control system, models and static databases; they will be used to investigate and control beam behavior. Primary components include an SNS global database and Java-based Applica…
▽ More
The architecture for Spallation Neutron Source accelerator physics application programs is presented. These high level applications involve processing and managing information from the diagnostic instruments, the machine control system, models and static databases; they will be used to investigate and control beam behavior. Primary components include an SNS global database and Java-based Application Toolkit, called XAL. A key element in the SNS application programs is time synchronization of data used in these applications, due to the short pulse length (1 ms), pulsed (60 Hz) nature of the device. The data synchronization progress is also presented.
△ Less
Submitted 5 December, 2001; v1 submitted 21 November, 2001;
originally announced November 2001.
-
The Beam Halo Experiment at the LEDA Facility
Authors:
P. L. Colestock,
T. Wangler,
C. K. Allen,
R. L. Sheffield,
D. Gilpatrick,
M. Thuot,
the LEDA Operations Team,
M. Schulze,
A. Harvey
Abstract:
Due to the potentially adverse effects of the generation of halo particles in intense proton beams, it is imperative to have a clear understanding of the mechanisms that can lead to halo formation for current and proposed high- intensity linacs. To this end a theoretical model has been developed, which indicates that protons under the combined influence of strong space charge forces and periodic…
▽ More
Due to the potentially adverse effects of the generation of halo particles in intense proton beams, it is imperative to have a clear understanding of the mechanisms that can lead to halo formation for current and proposed high- intensity linacs. To this end a theoretical model has been developed, which indicates that protons under the combined influence of strong space charge forces and periodic focussing in a linear transport channel can be kicked into halo orbits. However, no experimental measurements of beam halo in proton beams have yet been carried out. In this paper we report the progress of an effort to carry out an experiment to measure beam-halo using the existing high- intensity proton beam of the LEDA facility. A linear transport channel has been assembled with the appropriate diagnostics for measuring the expected small beam component in the beam halo as a function of beam parameters. The experiment is based on the use of an array of high-dynamic-range wire and beam scrapers to determine the halo and core profiles along the transport channel. Details of the experimental design, the expected halo measurement properties will be presented.
△ Less
Submitted 18 August, 2000;
originally announced August 2000.
