-
A detailed introduction to density-based topology optimisation of fluid flow problems with implementation in MATLAB
Authors:
Joe Alexandersen
Abstract:
This article presents a detailed introduction to density-based topology optimisation of fluid flow problems. The goal is to allow new students and researchers to quickly get started in the research area and to skip many of the initial steps, often consuming unnecessarily long time from the scientific advancement of the field. This is achieved by providing a step-by-step guide to the components nec…
▽ More
This article presents a detailed introduction to density-based topology optimisation of fluid flow problems. The goal is to allow new students and researchers to quickly get started in the research area and to skip many of the initial steps, often consuming unnecessarily long time from the scientific advancement of the field. This is achieved by providing a step-by-step guide to the components necessary to understand and implement the theory, as well as extending the supplied MATLAB code. The continuous design representation used and how it is connected to the Brinkman penalty approach, for simulating an immersed solid in a fluid domain, is illustrated. The different interpretations of the Brinkman penalty term and how to chose the penalty parameters are explained. The accuracy of the Brinkman penalty approach is analysed through parametric simulations of a reference geometry. The chosen finite element formulation and the solution method is explained. The minimum dissipated energy optimisation problem is defined and how to solve it using an optimality criteria solver and a continuation scheme is discussed. The included MATLAB implementation is documented, with details on the mesh, pre-processing, optimisation and post-processing. The code has two benchmark examples implemented and the application of the code to these is reviewed. Subsequently, several modifications to the code for more complicated examples are presented through provided code modifications and explanations. Lastly, the computational performance of the code is examined through studies of the computational time and memory usage, along with recommendations to decrease computational time through approximations.
△ Less
Submitted 19 July, 2022;
originally announced July 2022.
-
Revisiting the origin to bridge a gap between topology and topography optimisation of fluid flow problems
Authors:
Joe Alexandersen
Abstract:
This paper revisits the origin of topology optimisation for fluid flow problems, namely the Poiseuille-based frictional resistance term used to parametrise regions of solid and fluid. The traditional model only works for true topology optimisation, where it is used to approximate solid regions as areas with very small channel height and, thus, very high frictional resistance. It will be shown that…
▽ More
This paper revisits the origin of topology optimisation for fluid flow problems, namely the Poiseuille-based frictional resistance term used to parametrise regions of solid and fluid. The traditional model only works for true topology optimisation, where it is used to approximate solid regions as areas with very small channel height and, thus, very high frictional resistance. It will be shown that if the channel height is allowed to vary continuously and/or the minimum channel height is relatively large and/or meaning is attributed to intermediate design field values, then the predictions of the traditional model are wrong. To remedy this problem, this work introduces an augmentation of the mass conservation equation to allow for continuously varying channel heights. The proposed planar model accurately describes fully-developed flow between two plates of varying channel height. It allows for a significant reduction in the number of degrees-of-freedom, while generally ensuring a high accuracy for low-to-moderate Reynolds numbers in the laminar regime. The accuracy and limitations of both the traditional and proposed models are explored using in-depth parametric studies. The proposed model is used to optimise the height of the fluid channel between two parallel plates and, thus, the topography of the plates for a flow distribution problem. Lastly, it is observed that the proposed model actually produces better topological designs than the traditional model when applied to the topology optimisation of a flow manifold.
△ Less
Submitted 6 October, 2021;
originally announced October 2021.
-
Topology Optimization of Two Fluid Heat Exchangers
Authors:
Lukas Christan Høghøj,
Daniel Ruberg Nørhave,
Joe Alexandersen,
Ole Sigmund,
Casper Schousboe Andreasen
Abstract:
A method for density-based topology optimization of heat exchangers with two fluids is proposed. The goal of the optimization process is to maximize the heat transfer from one fluid to the other, under maximum pressure drop constraints for each of the fluid flows. A single design variable is used to describe the physical fields. The solid interface and the fluid domains are generated using an eros…
▽ More
A method for density-based topology optimization of heat exchangers with two fluids is proposed. The goal of the optimization process is to maximize the heat transfer from one fluid to the other, under maximum pressure drop constraints for each of the fluid flows. A single design variable is used to describe the physical fields. The solid interface and the fluid domains are generated using an erosion-dilation based identification technique, which guarantees well-separated fluids, as well as a minimum wall thickness between them. Under the assumption of laminar steady flow, the two fluids are modelled separately, but in the entire computational domain using the Brinkman penalization technique for ensuring negligible velocities outside of the respective fluid subdomains. The heat transfer is modelled using the convection-diffusion equation, where the convection is driven by both fluid flows. A stabilized finite element discretization is used to solve the governing equations. Results are presented for two different problems: a two-dimensional example illustrating and verifying the methodology; and a three-dimensional example inspired by shell-and-tube heat exchangers. The optimized designs for both cases show an improved heat transfer compared to the baseline designs. For the shell-and-tube case, the full freedom topology optimization approach is shown to yield performance improvements of up to 113% under the same pressure drop.
△ Less
Submitted 6 July, 2020; v1 submitted 3 July, 2020;
originally announced July 2020.
-
Topology optimization of heat sinks for instantaneous chip cooling using a transient pseudo-3D thermofluid model
Authors:
Tao Zeng,
Hu Wang,
Mengzhu Yang,
Joe Alexandersen
Abstract:
With the increasing power density of electronics components, the heat dissipation capacity of heat sinks gradually becomes a bottleneck. Many structural optimization methods, including topology optimization, have been widely used for heat sinks. Due to its high design freedom, topology optimization is suggested for the design of heat sinks using a transient pseudo-3D thermofluid model to acquire b…
▽ More
With the increasing power density of electronics components, the heat dissipation capacity of heat sinks gradually becomes a bottleneck. Many structural optimization methods, including topology optimization, have been widely used for heat sinks. Due to its high design freedom, topology optimization is suggested for the design of heat sinks using a transient pseudo-3D thermofluid model to acquire better instantaneous thermal performance. The pseudo-3D model is designed to reduce the computational cost and maintain an acceptable accuracy. The model relies on an artificial heat convection coefficient to couple two layers and establish the approximate relationship with the corresponding 3D model. In the model, a constant pressure drop and heat generation rate are treated. The material distribution is optimized to reduce the average temperature of the base plate at the prescribed terminal time. Furthermore, to reduce the intermediate density regions during the density-based topology optimization procedure, a detailed analysis of interpolation functions is made and the penalty factors are chosen on this basis. Finally, considering the engineering application of the model, a practical model with more powerful cooling medium and higher inlet pressure is built. The optimized design shows a better instantaneous thermal performance and provides 66.7% of the pumping power reduction compared with reference design.
△ Less
Submitted 29 November, 2019;
originally announced November 2019.
-
A "poor man's" approach for high-resolution three-dimensional topology optimization of natural convection problems
Authors:
Nicolo Pollini,
Ole Sigmund,
Casper Schousboe Andreasen,
Joe Alexandersen
Abstract:
This paper treats topology optimization of natural convection problems. A simplified model is suggested to describe the flow of an incompressible fluid in steady state conditions, similar to Darcy's law for fluid flow in porous media. The equations for the fluid flow are coupled to the thermal convection-diffusion equation through the Boussinesq approximation. The coupled non-linear system of equa…
▽ More
This paper treats topology optimization of natural convection problems. A simplified model is suggested to describe the flow of an incompressible fluid in steady state conditions, similar to Darcy's law for fluid flow in porous media. The equations for the fluid flow are coupled to the thermal convection-diffusion equation through the Boussinesq approximation. The coupled non-linear system of equations is discretized with stabilized finite elements and solved in a parallel framework that allows for the optimization of high resolution three-dimensional problems. A density-based topology optimization approach is used, where a two-material interpolation scheme is applied to both the permeability and conductivity of the distributed material. Due to the simplified model, the proposed methodology allows for a significant reduction of the computational effort required in the optimization. At the same time, it is significantly more accurate than even simpler models that rely on convection boundary conditions based on Newton's law of cooling. The methodology discussed herein is applied to the optimization-based design of three-dimensional heat sinks. The final designs are formally compared with results of previous work obtained from solving the full set of Navier-Stokes equations. The results are compared in terms of performance of the optimized designs and computational cost. The computational time is shown to be decreased to around 5-20% in terms of core-hours, allowing for the possibility of generating an optimized design during the workday on a small computational cluster and overnight on a high-end desktop.
△ Less
Submitted 30 March, 2019;
originally announced April 2019.
-
Large scale three-dimensional topology optimisation of heat sinks cooled by natural convection
Authors:
Joe Alexandersen,
Ole Sigmund,
Niels Aage
Abstract:
This work presents the application of density-based topology optimisation to the design of three-dimensional heat sinks cooled by natural convection. The governing equations are the steady-state incompressible Navier-Stokes equations coupled to the thermal convection-diffusion equation through the Bousinessq approximation. The fully coupled non-linear multiphysics system is solved using stabilised…
▽ More
This work presents the application of density-based topology optimisation to the design of three-dimensional heat sinks cooled by natural convection. The governing equations are the steady-state incompressible Navier-Stokes equations coupled to the thermal convection-diffusion equation through the Bousinessq approximation. The fully coupled non-linear multiphysics system is solved using stabilised trilinear equal-order finite elements in a parallel framework allowing for the optimisation of large scale problems with order of 40-330 million state degrees of freedom. The flow is assumed to be laminar and several optimised designs are presented for Grashof numbers between $10^3$ and $10^6$. Interestingly, it is observed that the number of branches in the optimised design increases with increasing Grashof numbers, which is opposite to two-dimensional optimised designs.
△ Less
Submitted 19 August, 2015;
originally announced August 2015.
-
Topology optimisation for natural convection problems
Authors:
Joe Alexandersen,
Niels Aage,
Casper Schousboe Andreasen,
Ole Sigmund
Abstract:
This paper demonstrates the application of the density-based topology optimisation approach for the design of heat sinks and micropumps based on natural convection effects. The problems are modelled under the assumptions of steady-state laminar flow using the incompressible Navier-Stokes equations coupled to the convection-diffusion equation through the Boussinesq approximation. In order to facili…
▽ More
This paper demonstrates the application of the density-based topology optimisation approach for the design of heat sinks and micropumps based on natural convection effects. The problems are modelled under the assumptions of steady-state laminar flow using the incompressible Navier-Stokes equations coupled to the convection-diffusion equation through the Boussinesq approximation. In order to facilitate topology optimisation, the Brinkman approach is taken to penalise velocities inside the solid domain and the effective thermal conductivity is interpolated in order to accommodate differences in thermal conductivity of the solid and fluid phases. The governing equations are discretised using stabilised finite elements and topology optimisation is performed for two different problems using discrete adjoint sensitivity analysis. The study shows that topology optimisation is a viable approach for designing heat sink geometries cooled by natural convection and micropumps powered by natural convection.
△ Less
Submitted 9 August, 2014;
originally announced August 2014.
