-
Metal Foil Detectors assembly for the beam and background monitoring in the LHCb experiment
Authors:
V. Pugatch,
F. Alessio,
V. Balagura,
F. Blanc,
S. Chernyshenko,
V. Dobishuk,
V. Kyva,
O. Okhrimenko,
D. Ramazanov,
H. Schindler,
O. Schneider
Abstract:
After an upgrade in 2019--2021, the LHCb experiment is taking data in Run 3 (2022--2026) with an instantaneous luminosity of proton-proton collisions of $2\!\times\!10^{33}$ cm$^{-2}$s$^{-1}$. This article presents the Radiation Monitoring System (RMS-R3) for controlling the beam and background conditions at LHCb. It runs continuously during the detector's operation, and independently of the main…
▽ More
After an upgrade in 2019--2021, the LHCb experiment is taking data in Run 3 (2022--2026) with an instantaneous luminosity of proton-proton collisions of $2\!\times\!10^{33}$ cm$^{-2}$s$^{-1}$. This article presents the Radiation Monitoring System (RMS-R3) for controlling the beam and background conditions at LHCb. It runs continuously during the detector's operation, and independently of the main LHCb data acquisition. Its design is based on robust and radiation-hard Metal Foil Detector technology. The RMS-R3 monitors the instantaneous luminosity and its evolution. The analysis of the RMS-R3 Run 3 data demonstrates its linear response with a high reproducibility in a five-decade dynamic range of luminosity over a long period of operation.
△ Less
Submitted 17 March, 2025;
originally announced March 2025.
-
The LHCb upgrade I
Authors:
LHCb collaboration,
R. Aaij,
A. S. W. Abdelmotteleb,
C. Abellan Beteta,
F. Abudinén,
C. Achard,
T. Ackernley,
B. Adeva,
M. Adinolfi,
P. Adlarson,
H. Afsharnia,
C. Agapopoulou,
C. A. Aidala,
Z. Ajaltouni,
S. Akar,
K. Akiba,
P. Albicocco,
J. Albrecht,
F. Alessio,
M. Alexander,
A. Alfonso Albero,
Z. Aliouche,
P. Alvarez Cartelle,
R. Amalric,
S. Amato
, et al. (1298 additional authors not shown)
Abstract:
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their select…
▽ More
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software.
△ Less
Submitted 10 September, 2024; v1 submitted 17 May, 2023;
originally announced May 2023.
-
The readout supervisor firmware for controlling the upgraded LHCb detector and readout system
Authors:
Federico Alessio,
Paolo Durante,
Guillaume Vouters
Abstract:
In 2019, the LHCb experiment at CERN will undergo a major upgrade where its detector electronics and the entire readout system will be replaced. The goal is to read-out all events at the full LHC frequency of 40 MHz, reaching a total data rate of ~40 Tb/s. In this context, a new timing, trigger and readout control system has been developed: its main tasks are to distribute centrally the clock, the…
▽ More
In 2019, the LHCb experiment at CERN will undergo a major upgrade where its detector electronics and the entire readout system will be replaced. The goal is to read-out all events at the full LHC frequency of 40 MHz, reaching a total data rate of ~40 Tb/s. In this context, a new timing, trigger and readout control system has been developed: its main tasks are to distribute centrally the clock, the timing information and to synchronize all elements in the readout system: from the very last Front-End ASIC to the building of events to be stored. The heart of the timing and readout control system is a VHDL firmware core that is now finalized and currently in use in test-benches and test-beams by the upgraded sub-detectors, for their initial commissioning phase. Such firmware core is able to generate all necessary processes to keep the synchronization of all readout elements with the LHC bunch crossing as well as it is able to generate asynchronous commands for calibration or test purposes. It is also able to accommodate for specific recipes to handle varying running conditions, by using a generic and fully configurable approach. In this paper, the philosophy and the implementation behind such firmware are described in details, posing particular emphasis to the real-time logical processes that were developed in order to satisfy the requirements of synchronization and readout control of the upgraded LHCb detector.
△ Less
Submitted 25 June, 2018; v1 submitted 22 June, 2018;
originally announced June 2018.
-
A true real-time success story: the case of collecting beauty-ful data at the LHCb experiment
Authors:
Federico Alessio
Abstract:
The LHCb experiment at CERN is currently completing its first big data taking campaign at the LHC started in 2009. It has been collecting data at more than 2.5 times its nominal design luminosity value and with a global efficiency of ~92%. Even more striking, the efficiency between online and offline recorded luminosity, obtained by comparing the data quality output, is close to 99%, which highlig…
▽ More
The LHCb experiment at CERN is currently completing its first big data taking campaign at the LHC started in 2009. It has been collecting data at more than 2.5 times its nominal design luminosity value and with a global efficiency of ~92%. Even more striking, the efficiency between online and offline recorded luminosity, obtained by comparing the data quality output, is close to 99%, which highlights how well the detector, its data acquisition system and its control system have been performing despite much harsher and more variable conditions than initially foreseen. In this paper, the excellent performance of the LHCb experiment will be described, by transversally tying together the timing and data acquisition system, the software trigger, the real-time calibration and the shifters interaction with the control system. Particular attention will be given to their real-time aspects, which allow performing an online reconstruction that is at the same performance level as the offline one through a real-time calibration and alignment of the full detector. In addition, the various solutions that have been chosen to operate the experiment safely and synchronously with the various phases of the LHC operations will also be shown. In fact, the quasi-autonomous control system of the LHCb experiment is the key to explain how such a large detector can be operated successfully around the clock by a pool of ~300 non-expert shifters. Finally, a critical review of the experiment will be presented in order to justify the reasons for a major upgrade of the detector.
△ Less
Submitted 25 June, 2018; v1 submitted 22 June, 2018;
originally announced June 2018.
-
The HeRSCheL detector: high-rapidity shower counters for LHCb
Authors:
K. Carvalho Akiba,
F. Alessio,
N. Bondar,
W. Byczynski,
V. Coco,
P. Collins,
R. Dumps,
R. Dzhelyadin,
P. Gandini,
B. R. Gruberg Cazon,
R. Jacobsson,
D. Johnson,
J. Manthey,
J. Mauricio,
R. McNulty,
S. Monteil,
B. Rachwal,
M. Ravonel Salzgeber,
L. Roy,
H. Schindler,
S. Stevenson,
G. Wilkinson
Abstract:
The HeRSCheL detector consists of a set of scintillating counters, designed to increase the coverage of the LHCb experiment in the high-rapidity regions on either side of the main spectrometer. The new detector improves the capabilities of LHCb for studies of diffractive interactions, most notably Central Exclusive Production. In this paper the construction, installation, commissioning, and perfor…
▽ More
The HeRSCheL detector consists of a set of scintillating counters, designed to increase the coverage of the LHCb experiment in the high-rapidity regions on either side of the main spectrometer. The new detector improves the capabilities of LHCb for studies of diffractive interactions, most notably Central Exclusive Production. In this paper the construction, installation, commissioning, and performance of HeRSCheL are presented.
△ Less
Submitted 4 June, 2018; v1 submitted 12 January, 2018;
originally announced January 2018.
-
Proceedings of the third French-Ukrainian workshop on the instrumentation developments for HEP
Authors:
F. Alessio,
S. Ya. Barsuk,
L. Berge,
O. A. Bezshyyko,
R. S. Boiko,
I. Chaikovska,
M. Chapellier,
G. Charles,
A. Chaus,
R. Chehab,
D. M. Chernyak,
N. Coron,
F. A. Danevich,
N. Delerue,
L. Devoyon,
A. -A. Drillien,
L. Dumoulin,
C. Enss,
O. Fedorchuk,
A. Fleischmann,
L. Gastaldo,
A. Giuliani,
D. Gray,
M. Gros,
S. Herve
, et al. (48 additional authors not shown)
Abstract:
The reports collected in these proceedings have been presented in the third French-Ukrainian workshop on the instrumentation developments for high-energy physics held at LAL, Orsay on October 15-16. The workshop was conducted in the scope of the IDEATE International Associated Laboratory (LIA). Joint developments between French and Ukrainian laboratories and universities as well as new proposals h…
▽ More
The reports collected in these proceedings have been presented in the third French-Ukrainian workshop on the instrumentation developments for high-energy physics held at LAL, Orsay on October 15-16. The workshop was conducted in the scope of the IDEATE International Associated Laboratory (LIA). Joint developments between French and Ukrainian laboratories and universities as well as new proposals have been discussed. The main topics of the papers presented in the Proceedings are developments for accelerator and beam monitoring, detector developments, joint developments for large-scale high-energy and astroparticle physics projects, medical applications.
△ Less
Submitted 23 December, 2015;
originally announced December 2015.
-
The LHCb Upgrade
Authors:
Federico Alessio
Abstract:
The LHCb experiment is designed to perform high-precision measurements of CP violation and search for New Physics using the enormous flux involving beauty and charm quarks produced at the LHC. The operation and the results obtained from the data collected in 2010 and 2011 demonstrate that the detector is robust and functioning very well. However, the limit of 1 fb^-1 of data per nominal year canno…
▽ More
The LHCb experiment is designed to perform high-precision measurements of CP violation and search for New Physics using the enormous flux involving beauty and charm quarks produced at the LHC. The operation and the results obtained from the data collected in 2010 and 2011 demonstrate that the detector is robust and functioning very well. However, the limit of 1 fb^-1 of data per nominal year cannot be overcome without improving the detector. We therefore plan for an upgraded spectrometer by 2018 with a 40 MHz readout and a much more flexible software-based triggering system that will increase the data rate as well as the efficiency specially in the hadronic channels. Here we present the LHCb detector upgrade plans, based on the Letter of Intent and Framework Technical Design Report.
△ Less
Submitted 1 October, 2013;
originally announced October 2013.
-
Absolute luminosity measurements with the LHCb detector at the LHC
Authors:
The LHCb Collaboration,
R. Aaij,
B. Adeva,
M. Adinolfi,
C. Adrover,
A. Affolder,
Z. Ajaltouni,
J. Albrecht,
F. Alessio,
M. Alexander,
G. Alkhazov,
P. Alvarez Cartelle,
A. A. Alves Jr,
S. Amato,
Y. Amhis,
J. Anderson,
R. B. Appleby,
O. Aquines Gutierrez,
F. Archilli,
L. Arrabito,
A. Artamonov,
M. Artuso,
E. Aslanides,
G. Auriemma,
S. Bachmann
, et al. (549 additional authors not shown)
Abstract:
Absolute luminosity measurements are of general interest for colliding-beam experiments at storage rings. These measurements are necessary to determine the absolute cross-sections of reaction processes and are valuable to quantify the performance of the accelerator. Using data taken in 2010, LHCb has applied two methods to determine the absolute scale of its luminosity measurements for proton-prot…
▽ More
Absolute luminosity measurements are of general interest for colliding-beam experiments at storage rings. These measurements are necessary to determine the absolute cross-sections of reaction processes and are valuable to quantify the performance of the accelerator. Using data taken in 2010, LHCb has applied two methods to determine the absolute scale of its luminosity measurements for proton-proton collisions at the LHC with a centre-of-mass energy of 7 TeV. In addition to the classic "van der Meer scan" method a novel technique has been developed which makes use of direct imaging of the individual beams using beam-gas and beam-beam interactions. This beam imaging method is made possible by the high resolution of the LHCb vertex detector and the close proximity of the detector to the beams, and allows beam parameters such as positions, angles and widths to be determined. The results of the two methods have comparable precision and are in good agreement. Combining the two methods, an overall precision of 3.5% in the absolute luminosity determination is reached. The techniques used to transport the absolute luminosity calibration to the full 2010 data-taking period are presented.
△ Less
Submitted 11 January, 2012; v1 submitted 13 October, 2011;
originally announced October 2011.
