-
The ecological forecast limit revisited: Potential, actual and relative system predictability
Authors:
Marieke Wesselkamp,
Jakob Albrecht,
Ewan Pinnington,
William J. Castillo,
Florian Pappenberger,
Carsten F. Dormann
Abstract:
Ecological forecasts are model-based statements about currently unknown ecosystem states in time or space. For a model forecast to be useful to inform decision makers, model validation and verification determine adequateness. The measure of forecast goodness that can be translated into a limit up to which a forecast is acceptable is known as the 'forecast limit'. While verification in weather fore…
▽ More
Ecological forecasts are model-based statements about currently unknown ecosystem states in time or space. For a model forecast to be useful to inform decision makers, model validation and verification determine adequateness. The measure of forecast goodness that can be translated into a limit up to which a forecast is acceptable is known as the 'forecast limit'. While verification in weather forecasting follows strict criteria with established metrics and forecast limits, assessments of ecological forecasting models still remain experiment-specific, and forecast limits are rarely reported. As such, users of ecological forecasts remain uninformed of how far into the future statements can be trusted. In this work, we synthesise existing approaches to define empirical forecast limits in a unified framework for assessing ecological predictability and offer recipes for their computation. We distinguish the model's potential and absolute forecast limit, and show how a benchmark model can help determine its relative forecast limit. The approaches are demonstrated with three case studies from population, ecosystem, and Earth system research. We found that forecast limits can be computed with three requirements: A verification reference, a scoring function, and a predictive error tolerance. Within our framework, forecast limits are defined for practically any ecological forecast and support research on ecological predictability analysis.
△ Less
Submitted 16 April, 2025; v1 submitted 1 December, 2024;
originally announced December 2024.
-
Summary of the trigger systems of the Large Hadron Collider experiments ALICE, ATLAS, CMS and LHCb
Authors:
Johannes Albrecht,
Leon Bozianu,
Lukas Calefice,
Sofia Cella,
Carlos Eduardo Cocha Toapaxi,
Caterina Doglioni,
Kaare Endrup Iversen,
Vladimir Gligorov,
James Andrew Gooding,
Patin Inkaew,
Daniel Magdalinski,
Alexandros Sopasakis,
Danielle Joan Wilson-Edwards,
The SMARTHEP network
Abstract:
In modern High Energy Physics (HEP) experiments, triggers perform the important task of selecting, in real time, the data to be recorded and saved for physics analyses. As a result, trigger strategies play a key role in extracting relevant information from the vast streams of data produced at facilities like the Large Hadron Collider (LHC). As the energy and luminosity of the collisions increase,…
▽ More
In modern High Energy Physics (HEP) experiments, triggers perform the important task of selecting, in real time, the data to be recorded and saved for physics analyses. As a result, trigger strategies play a key role in extracting relevant information from the vast streams of data produced at facilities like the Large Hadron Collider (LHC). As the energy and luminosity of the collisions increase, these strategies must be upgraded and maintained to suit the experimental needs. This whitepaper compiled by the SMARTHEP Early Stage Researchers presents a high-level overview and reviews recent developments of triggering practices employed at the LHC. The general trigger principles applied at modern HEP experiments are highlighted, with specific reference to the current trigger state-of-the-art within the ALICE, ATLAS, CMS and LHCb collaborations. Furthermore, a brief synopsis of the new trigger paradigm required by the upcoming high-luminosity upgrade of the LHC is provided.
△ Less
Submitted 24 July, 2024;
originally announced August 2024.
-
Heat Transfer Coefficients of Moving Particle Beds from Flow-Dependent Particle Bed Thermal Conductivity and Near-Wall Resistance
Authors:
Sarath R. Adapa,
Xintong Zhang,
Tianshi Feng,
Ka Man Chung,
Kevin J. Albrecht,
Clifford K. Ho,
Dimitri A. Madden,
Renkun Chen
Abstract:
Determination of heat transfer coefficients for flowing packed particle beds is essential to the design of particle heat exchangers, and other thermal processes. While such dense granular flows fall into the well-known plug-flow regime, the discrete nature of granular materials alters the thermal transport processes in both the near-wall and bulk regions of flowing particle beds from their station…
▽ More
Determination of heat transfer coefficients for flowing packed particle beds is essential to the design of particle heat exchangers, and other thermal processes. While such dense granular flows fall into the well-known plug-flow regime, the discrete nature of granular materials alters the thermal transport processes in both the near-wall and bulk regions of flowing particle beds from their stationary counterparts. As a result, heat transfer correlations based on the stationary particle bed thermal conductivity could be inadequate for flowing particles in a heat exchanger. Earlier works have achieved reasonable agreement with experiments by treating granular media as a plug-flow continuum with a near-wall thermal resistance in series. However, the properties of the continuum were often obtained from measurements on stationary beds owing to the difficulty of flowing bed measurements. In this work, it was found that the properties of a stationary bed are highly sensitive to the method of particle packing and there is a decrease in the particle bed thermal conductivity and increase in the near-wall thermal resistance, measured as an effective air gap thickness, on the onset of particle flow. These variations in the thermophysical properties of stationary and flowing particle beds can lead to errors in heat transfer coefficient calculations. Therefore, the heat transfer coefficients for granular flows were calculated using experimentally determined flowing particle bed thermal conductivity and near-wall air gap for ceramic particles -CARBOCP40/100(275 um), HSP40/70(404um) and HSP16/30(956um); at velocities of 5-15mms-1; and temperatures of 300-650C. The thermal conductivity and air gap values for CP40/100 and HSP40/70 were further used to calculate heat transfer coefficients across different particle bed temperatures and velocities for different parallel-plate heat exchanger dimensions.
△ Less
Submitted 20 September, 2024; v1 submitted 28 March, 2024;
originally announced March 2024.
-
Development of the Topological Trigger for LHCb Run 3
Authors:
Nicole Schulte,
Blaise Raheem Delaney,
Niklas Nolte,
Gregory Max Ciezarek,
Johannes Albrecht,
Mike Williams
Abstract:
The data-taking conditions expected in Run 3 of the LHCb experiment at CERN are unprecedented and challenging for the software and computing systems. Despite that, the LHCb collaboration pioneers the use of a software-only trigger system to cope with the increased event rate efficiently. The beauty physics programme of LHCb is heavily reliant on topological triggers. These are devoted to selecting…
▽ More
The data-taking conditions expected in Run 3 of the LHCb experiment at CERN are unprecedented and challenging for the software and computing systems. Despite that, the LHCb collaboration pioneers the use of a software-only trigger system to cope with the increased event rate efficiently. The beauty physics programme of LHCb is heavily reliant on topological triggers. These are devoted to selecting beauty-hadron candidates inclusively, based on the characteristic decay topology and kinematic properties expected from beauty decays. The following proceeding describes the current progress of the Run 3 implementation of the topological triggers using Lipschitz monotonic neural networks. This architecture offers robustness under varying detector conditions and sensitivity to long-lived candidates, improving the possibility of discovering New Physics at LHCb.
△ Less
Submitted 20 June, 2023; v1 submitted 16 June, 2023;
originally announced June 2023.
-
The Brain Tumor Segmentation (BraTS) Challenge 2023: Glioma Segmentation in Sub-Saharan Africa Patient Population (BraTS-Africa)
Authors:
Maruf Adewole,
Jeffrey D. Rudie,
Anu Gbadamosi,
Oluyemisi Toyobo,
Confidence Raymond,
Dong Zhang,
Olubukola Omidiji,
Rachel Akinola,
Mohammad Abba Suwaid,
Adaobi Emegoakor,
Nancy Ojo,
Kenneth Aguh,
Chinasa Kalaiwo,
Gabriel Babatunde,
Afolabi Ogunleye,
Yewande Gbadamosi,
Kator Iorpagher,
Evan Calabrese,
Mariam Aboian,
Marius Linguraru,
Jake Albrecht,
Benedikt Wiestler,
Florian Kofler,
Anastasia Janas,
Dominic LaBella
, et al. (26 additional authors not shown)
Abstract:
Gliomas are the most common type of primary brain tumors. Although gliomas are relatively rare, they are among the deadliest types of cancer, with a survival rate of less than 2 years after diagnosis. Gliomas are challenging to diagnose, hard to treat and inherently resistant to conventional therapy. Years of extensive research to improve diagnosis and treatment of gliomas have decreased mortality…
▽ More
Gliomas are the most common type of primary brain tumors. Although gliomas are relatively rare, they are among the deadliest types of cancer, with a survival rate of less than 2 years after diagnosis. Gliomas are challenging to diagnose, hard to treat and inherently resistant to conventional therapy. Years of extensive research to improve diagnosis and treatment of gliomas have decreased mortality rates across the Global North, while chances of survival among individuals in low- and middle-income countries (LMICs) remain unchanged and are significantly worse in Sub-Saharan Africa (SSA) populations. Long-term survival with glioma is associated with the identification of appropriate pathological features on brain MRI and confirmation by histopathology. Since 2012, the Brain Tumor Segmentation (BraTS) Challenge have evaluated state-of-the-art machine learning methods to detect, characterize, and classify gliomas. However, it is unclear if the state-of-the-art methods can be widely implemented in SSA given the extensive use of lower-quality MRI technology, which produces poor image contrast and resolution and more importantly, the propensity for late presentation of disease at advanced stages as well as the unique characteristics of gliomas in SSA (i.e., suspected higher rates of gliomatosis cerebri). Thus, the BraTS-Africa Challenge provides a unique opportunity to include brain MRI glioma cases from SSA in global efforts through the BraTS Challenge to develop and evaluate computer-aided-diagnostic (CAD) methods for the detection and characterization of glioma in resource-limited settings, where the potential for CAD tools to transform healthcare are more likely.
△ Less
Submitted 30 May, 2023;
originally announced May 2023.
-
The LHCb upgrade I
Authors:
LHCb collaboration,
R. Aaij,
A. S. W. Abdelmotteleb,
C. Abellan Beteta,
F. Abudinén,
C. Achard,
T. Ackernley,
B. Adeva,
M. Adinolfi,
P. Adlarson,
H. Afsharnia,
C. Agapopoulou,
C. A. Aidala,
Z. Ajaltouni,
S. Akar,
K. Akiba,
P. Albicocco,
J. Albrecht,
F. Alessio,
M. Alexander,
A. Alfonso Albero,
Z. Aliouche,
P. Alvarez Cartelle,
R. Amalric,
S. Amato
, et al. (1298 additional authors not shown)
Abstract:
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their select…
▽ More
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software.
△ Less
Submitted 10 September, 2024; v1 submitted 17 May, 2023;
originally announced May 2023.
-
Characterization and performance of the Apollon Short-Focal-Area facility following its commissioning at 1 PW level
Authors:
K. Burdonov,
A. Fazzini,
V. Lelasseux,
J. Albrecht,
P. Antici,
Y. Ayoul,
A. Beluze,
D. Cavanna,
T. Ceccotti,
M. Chabanis,
A. Chaleil,
S. N. Chen,
Z. Chen,
F. Consoli,
M. Cuciuc,
X. Davoine,
J. P. Delaneau,
E. d'Humières,
J-L. Dubois,
C. Evrard,
E. Filippov,
A. Freneaux,
P. Forestier-Colleoni,
L. Gremillet,
V. Horny
, et al. (23 additional authors not shown)
Abstract:
We present the results of the first commissioning phase of the ``short focal length'' area (SFA) of the Apollon laser facility (located in Saclay, France), which was performed with the first available laser beam (F2), scaled to a nominal power of one petawatt. Under the conditions that were tested, this beam delivered on target pulses of 10 J average energy and 24 fs duration. Several diagnostics…
▽ More
We present the results of the first commissioning phase of the ``short focal length'' area (SFA) of the Apollon laser facility (located in Saclay, France), which was performed with the first available laser beam (F2), scaled to a nominal power of one petawatt. Under the conditions that were tested, this beam delivered on target pulses of 10 J average energy and 24 fs duration. Several diagnostics were fielded to assess the performance of the facility. The on-target focal spot, its spatial stability, the temporal intensity profile prior to the main pulse, as well as the resulting density gradient formed at the irradiated side of solid targets, have been thoroughly characterized, with the goal of helping users design future experiments. Emissions of energetic electrons, ions, and electromagnetic radiation were recorded, showing good laser-to-target coupling efficiency and an overall performance comparable with that of similar international facilities. This will be followed in 2022 by a further commissioning stage at the multi-petawatt level.
△ Less
Submitted 3 August, 2021;
originally announced August 2021.
-
A Comparison of CPU and GPU implementations for the LHCb Experiment Run 3 Trigger
Authors:
R. Aaij,
M. Adinolfi,
S. Aiola,
S. Akar,
J. Albrecht,
M. Alexander,
S. Amato,
Y. Amhis,
F. Archilli,
M. Bala,
G. Bassi,
L. Bian,
M. P. Blago,
T. Boettcher,
A. Boldyrev,
S. Borghi,
A. Brea Rodriguez,
L. Calefice,
M. Calvo Gomez,
D. H. Cámpora Pérez,
A. Cardini,
M. Cattaneo,
V. Chobanova,
G. Ciezarek,
X. Cid Vidal
, et al. (135 additional authors not shown)
Abstract:
The LHCb experiment at CERN is undergoing an upgrade in preparation for the Run 3 data taking period of the LHC. As part of this upgrade the trigger is moving to a fully software implementation operating at the LHC bunch crossing rate. We present an evaluation of a CPU-based and a GPU-based implementation of the first stage of the High Level Trigger. After a detailed comparison both options are fo…
▽ More
The LHCb experiment at CERN is undergoing an upgrade in preparation for the Run 3 data taking period of the LHC. As part of this upgrade the trigger is moving to a fully software implementation operating at the LHC bunch crossing rate. We present an evaluation of a CPU-based and a GPU-based implementation of the first stage of the High Level Trigger. After a detailed comparison both options are found to be viable. This document summarizes the performance and implementation details of these options, the outcome of which has led to the choice of the GPU-based implementation as the baseline.
△ Less
Submitted 4 January, 2022; v1 submitted 9 May, 2021;
originally announced May 2021.
-
Measurement and Analysis of Thermal Conductivity of Ceramic Particle Beds for Solar Thermal Energy Storage
Authors:
Ka Man Chung,
Jian Zeng,
Sarath Reddy Adapa,
Tianshi Feng,
Malavika V. Bagepalli,
Peter G. Loutzenhiser,
Kevin J. Albrecht,
Clifford K. Ho,
Renkun Chen
Abstract:
A systematic study was performed to measure the effective thermal conductivity of ceramic particle beds, a promising heat transfer and thermal energy storage media for concentrating solar power (CSP). The thermal conductivity of the ceramic particle beds was measured using a transient hot-wire (THW) method within a temperature range of room temperature to 700 oC, the target operating temperature o…
▽ More
A systematic study was performed to measure the effective thermal conductivity of ceramic particle beds, a promising heat transfer and thermal energy storage media for concentrating solar power (CSP). The thermal conductivity of the ceramic particle beds was measured using a transient hot-wire (THW) method within a temperature range of room temperature to 700 oC, the target operating temperature of the next-generation CSP systems. Two different types of ceramic particles were examined: (1) CARBOBEAD HSP 40/70 and (2) CARBOBEAD CP 40/100 with the average particle sizes of ~ 400 μm and ~280 μm, respectively, and thermal conductivities ranging from ~0.25 W m-1 K-1 to ~0.50 W m-1 K-1 from 20 oC to 700 oC in both air and N2 gas. The gaseous pressure dependence of the thermal conductivity of the ceramic particle beds was also studied in the N2 environment to differentiate the contributions from gas conduction, solid conduction, and radiation. Calculations using the Zehner, Bauer, and Schlünder (ZBS) model showed good agreements with the measurements. Based on the model, it is concluded that the effective thermal conductivity of the packed particle beds is dominated by the gas conduction while the solid conduction and radiation contributes to about 20% of the effective thermal conductivity at high temperature.
△ Less
Submitted 5 May, 2021;
originally announced May 2021.
-
Allen: A high level trigger on GPUs for LHCb
Authors:
R. Aaij,
J. Albrecht,
M. Belous,
P. Billoir,
T. Boettcher,
A. Brea Rodríguez,
D. vom Bruch,
D. H. Cámpora Pérez,
A. Casais Vidal,
D. C. Craik,
P. Fernandez Declara,
L. Funke,
V. V. Gligorov,
B. Jashal,
N. Kazeev,
D. Martínez Santos,
F. Pisani,
D. Pliushchenko,
S. Popov,
R. Quagliani,
M. Rangel,
F. Reiss,
C. Sánchez Mayordomo,
R. Schwemmer,
M. Sokoloff
, et al. (4 additional authors not shown)
Abstract:
We describe a fully GPU-based implementation of the first level trigger for the upgrade of the LHCb detector, due to start data taking in 2021. We demonstrate that our implementation, named Allen, can process the 40 Tbit/s data rate of the upgraded LHCb detector and perform a wide variety of pattern recognition tasks. These include finding the trajectories of charged particles, finding proton-prot…
▽ More
We describe a fully GPU-based implementation of the first level trigger for the upgrade of the LHCb detector, due to start data taking in 2021. We demonstrate that our implementation, named Allen, can process the 40 Tbit/s data rate of the upgraded LHCb detector and perform a wide variety of pattern recognition tasks. These include finding the trajectories of charged particles, finding proton-proton collision points, identifying particles as hadrons or muons, and finding the displaced decay vertices of long-lived particles. We further demonstrate that Allen can be implemented in around 500 scientific or consumer GPU cards, that it is not I/O bound, and can be operated at the full LHC collision rate of 30 MHz. Allen is the first complete high-throughput GPU trigger proposed for a HEP experiment.
△ Less
Submitted 12 May, 2020; v1 submitted 19 December, 2019;
originally announced December 2019.
-
Design and performance of the LHCb trigger and full real-time reconstruction in Run 2 of the LHC
Authors:
R. Aaij,
S. Akar,
J. Albrecht,
M. Alexander,
A. Alfonso Albero,
S. Amerio,
L. Anderlini,
P. d'Argent,
A. Baranov,
W. Barter,
S. Benson,
D. Bobulska,
T. Boettcher,
S. Borghi,
E. E. Bowen,
L. Brarda,
C. Burr,
J. -P. Cachemiche,
M. Calvo Gomez,
M. Cattaneo,
H. Chanal,
M. Chapman,
M. Chebbi,
M. Chefdeville,
P. Ciambrone
, et al. (116 additional authors not shown)
Abstract:
The LHCb collaboration has redesigned its trigger to enable the full offline detector reconstruction to be performed in real time. Together with the real-time alignment and calibration of the detector, and a software infrastructure to make persistent the high-level physics objects produced during real-time processing, this redesign enabled the widespread deployment of real-time analysis during Run…
▽ More
The LHCb collaboration has redesigned its trigger to enable the full offline detector reconstruction to be performed in real time. Together with the real-time alignment and calibration of the detector, and a software infrastructure to make persistent the high-level physics objects produced during real-time processing, this redesign enabled the widespread deployment of real-time analysis during Run 2. We describe the design of the Run 2 trigger and real-time reconstruction, and present data-driven performance measurements for a representative sample of LHCb's physics programme.
△ Less
Submitted 25 June, 2019; v1 submitted 27 December, 2018;
originally announced December 2018.
-
HEP Community White Paper on Software trigger and event reconstruction: Executive Summary
Authors:
Johannes Albrecht,
Kenneth Bloom,
Tommaso Boccali,
Antonio Boveia,
Michel De Cian,
Caterina Doglioni,
Agnieszka Dziurda,
Amir Farbin,
Conor Fitzpatrick,
Frank Gaede,
Simon George,
Vladimir Gligorov,
Hadrien Grasland,
Lucia Grillo,
Benedikt Hegner,
William Kalderon,
Sami Kama,
Patrick Koppenburg,
Slava Krutelyov,
Rob Kutschke,
Walter Lampl,
David Lange,
Ed Moyse,
Andrew Norman,
Marko Petric
, et al. (17 additional authors not shown)
Abstract:
Realizing the physics programs of the planned and upgraded high-energy physics (HEP) experiments over the next 10 years will require the HEP community to address a number of challenges in the area of software and computing. For this reason, the HEP software community has engaged in a planning process over the past two years, with the objective of identifying and prioritizing the research and devel…
▽ More
Realizing the physics programs of the planned and upgraded high-energy physics (HEP) experiments over the next 10 years will require the HEP community to address a number of challenges in the area of software and computing. For this reason, the HEP software community has engaged in a planning process over the past two years, with the objective of identifying and prioritizing the research and development required to enable the next generation of HEP detectors to fulfill their full physics potential. The aim is to produce a Community White Paper which will describe the community strategy and a roadmap for software and computing research and development in HEP for the 2020s. The topics of event reconstruction and software triggers were considered by a joint working group and are summarized together in this document.
△ Less
Submitted 23 February, 2018;
originally announced February 2018.
-
HEP Community White Paper on Software trigger and event reconstruction
Authors:
Johannes Albrecht,
Kenneth Bloom,
Tommaso Boccali,
Antonio Boveia,
Michel De Cian,
Caterina Doglioni,
Agnieszka Dziurda,
Amir Farbin,
Conor Fitzpatrick,
Frank Gaede,
Simon George,
Vladimir Gligorov,
Hadrien Grasland,
Lucia Grillo,
Benedikt Hegner,
William Kalderon,
Sami Kama,
Patrick Koppenburg,
Slava Krutelyov,
Rob Kutschke,
Walter Lampl,
David Lange,
Ed Moyse,
Andrew Norman,
Marko Petric
, et al. (17 additional authors not shown)
Abstract:
Realizing the physics programs of the planned and upgraded high-energy physics (HEP) experiments over the next 10 years will require the HEP community to address a number of challenges in the area of software and computing. For this reason, the HEP software community has engaged in a planning process over the past two years, with the objective of identifying and prioritizing the research and devel…
▽ More
Realizing the physics programs of the planned and upgraded high-energy physics (HEP) experiments over the next 10 years will require the HEP community to address a number of challenges in the area of software and computing. For this reason, the HEP software community has engaged in a planning process over the past two years, with the objective of identifying and prioritizing the research and development required to enable the next generation of HEP detectors to fulfill their full physics potential. The aim is to produce a Community White Paper which will describe the community strategy and a roadmap for software and computing research and development in HEP for the 2020s. The topics of event reconstruction and software triggers were considered by a joint working group and are summarized together in this document.
△ Less
Submitted 23 February, 2018;
originally announced February 2018.
-
A Roadmap for HEP Software and Computing R&D for the 2020s
Authors:
Johannes Albrecht,
Antonio Augusto Alves Jr,
Guilherme Amadio,
Giuseppe Andronico,
Nguyen Anh-Ky,
Laurent Aphecetche,
John Apostolakis,
Makoto Asai,
Luca Atzori,
Marian Babik,
Giuseppe Bagliesi,
Marilena Bandieramonte,
Sunanda Banerjee,
Martin Barisits,
Lothar A. T. Bauerdick,
Stefano Belforte,
Douglas Benjamin,
Catrin Bernius,
Wahid Bhimji,
Riccardo Maria Bianchi,
Ian Bird,
Catherine Biscarat,
Jakob Blomer,
Kenneth Bloom,
Tommaso Boccali
, et al. (285 additional authors not shown)
Abstract:
Particle physics has an ambitious and broad experimental programme for the coming decades. This programme requires large investments in detector hardware, either to build new facilities and experiments, or to upgrade existing ones. Similarly, it requires commensurate investment in the R&D of software to acquire, manage, process, and analyse the shear amounts of data to be recorded. In planning for…
▽ More
Particle physics has an ambitious and broad experimental programme for the coming decades. This programme requires large investments in detector hardware, either to build new facilities and experiments, or to upgrade existing ones. Similarly, it requires commensurate investment in the R&D of software to acquire, manage, process, and analyse the shear amounts of data to be recorded. In planning for the HL-LHC in particular, it is critical that all of the collaborating stakeholders agree on the software goals and priorities, and that the efforts complement each other. In this spirit, this white paper describes the R&D activities required to prepare for this software upgrade.
△ Less
Submitted 19 December, 2018; v1 submitted 18 December, 2017;
originally announced December 2017.
-
229 nm UV LEDs using p-type silicon for increased hole injection
Authors:
Dong Liu,
Sang June Cho,
Jeongpil Park,
Jung-Hun Seo,
Rafael Dalmau,
Deyin Zhao,
Kwangeun Kim,
Munho Kim,
In-Kyu Lee,
John D. Albrecht,
Weidong Zhou,
Baxter Moody,
Zhenqiang Ma
Abstract:
Ultraviolet (UV) light emission at 229 nm wavelength from diode structures based on AlN/Al0.77Ga0.23N quantum wells and using p-type Si to significantly increase hole injection was reported. Both electrical and optical characteristics were measured. Owing to the large concentration of holes from p-Si and efficient hole injection, no efficiency droop was observed up to a current density of 76 A/cm2…
▽ More
Ultraviolet (UV) light emission at 229 nm wavelength from diode structures based on AlN/Al0.77Ga0.23N quantum wells and using p-type Si to significantly increase hole injection was reported. Both electrical and optical characteristics were measured. Owing to the large concentration of holes from p-Si and efficient hole injection, no efficiency droop was observed up to a current density of 76 A/cm2 under continuous wave operation and without external thermal management. An optical output power of 160 uW was obtained with corresponding external quantum efficiency of 0.027%. This study demonstrates that by adopting p-type Si nanomembrane contacts as hole injector, practical levels of hole injection can be realized in UV light-emitting diodes with very high Al composition AlGaN quantum wells, enabling emission wavelengths and power levels that were previously inaccessible using traditional p-i-n structures with poor hole injection efficiency.
△ Less
Submitted 13 August, 2017;
originally announced August 2017.
-
UVC LEDs on Bulk AlN Substrates Using Silicon Nanomembranes for Efficient Hole Injection
Authors:
Sang June Cho,
Dong Liu,
Jung-Hun Seo,
Rafael Dalmau,
Kwangeun Kim,
Jeongpil Park,
Deyin Zhao,
Xin Yin,
Yei Hwan Jung,
In-Kyu Lee,
Munho Kim,
Xudong Wang,
John D. Albrecht,
Weidong Zhou Baxter Moody,
Zhenqiang Ma
Abstract:
As UV LEDs are explored at shorter wavelengths (< 280 nm) into the UVC spectral range, the crystalline quality of epitaxial AlGaN films with high Al compositions and inefficient hole injection from p-type AlGaN severely limit the LED performance and development. In this work, we report on 237 nm light emission with a record light output power of 265 uW from AlN/Al0.72Ga028N multiple quantum well U…
▽ More
As UV LEDs are explored at shorter wavelengths (< 280 nm) into the UVC spectral range, the crystalline quality of epitaxial AlGaN films with high Al compositions and inefficient hole injection from p-type AlGaN severely limit the LED performance and development. In this work, we report on 237 nm light emission with a record light output power of 265 uW from AlN/Al0.72Ga028N multiple quantum well UVC LEDs using bulk AlN substrates and p-type silicon nanomembrane contact layers for significantly improved AlGaN film quality and hole injection, respectively. No intensity degradation or efficiency droop was observed up to a current density of 245 A/cm2, which is attributed to the low dislocation density within AlGaN films, the large concentration of holes from p-Si, and efficient hole-transport to the active region. Additionally, the emission peak at 237 nm is dominant across the electroluminescence spectrum with no significant parasitic emissions observed. This study demonstrates the feasibility of using p-Si as a hole injector for UVC LEDs, which can be extended to even shorter wavelengths where hole injection from chemically doped AlGaN layers is not feasible.
△ Less
Submitted 13 July, 2017;
originally announced July 2017.
-
Amplitude analysis of four-body decays using a massively-parallel fitting framework
Authors:
C. Hasse,
J. Albrecht,
A. A. Alves Jr.,
P. d'Argent,
T. D. Evans,
J. Rademacker,
M. D. Sokoloff
Abstract:
The GooFit Framework is designed to perform maximum-likelihood fits for arbitrary functions on various parallel back ends, for example a GPU. We present an extension to GooFit which adds the functionality to perform time-dependent amplitude analyses of pseudoscalar mesons decaying into four pseudoscalar final states. Benchmarks of this functionality show a significant performance increase when uti…
▽ More
The GooFit Framework is designed to perform maximum-likelihood fits for arbitrary functions on various parallel back ends, for example a GPU. We present an extension to GooFit which adds the functionality to perform time-dependent amplitude analyses of pseudoscalar mesons decaying into four pseudoscalar final states. Benchmarks of this functionality show a significant performance increase when utilizing a GPU compared to a CPU. Furthermore, this extension is employed to study the sensitivity on the $D^0 - \bar{D}^0$ mixing parameters $x$ and $y$ in a time-dependent amplitude analysis of the decay $D^0 \rightarrow K^+π^-π^+π^-$. Studying a sample of 50 000 events and setting the central values to the world average of $x = (0.49 \pm0.15) \%$ and $y = (0.61 \pm0.08) \%$, the statistical sensitivities of $x$ and $y$ are determined to be $σ(x) = 0.019 \%$ and $σ(y) = 0.019 \%$.
△ Less
Submitted 22 February, 2017;
originally announced February 2017.
-
The upgrade of the LHCb trigger system
Authors:
Johannes Albrecht,
Conor Fitzpatrick,
Vladimir Gligorov,
Gerhard Raven
Abstract:
The LHCb experiment will operate at a luminosity of $2\times10^{33}$ cm$^{-2}$s$^{-1}$ during LHC Run 3. At this rate the present readout and hardware Level-0 trigger become a limitation, especially for fully hadronic final states. In order to maintain a high signal efficiency the upgraded LHCb detector will deploy two novel concepts: a triggerless readout and a full software trigger.
The LHCb experiment will operate at a luminosity of $2\times10^{33}$ cm$^{-2}$s$^{-1}$ during LHC Run 3. At this rate the present readout and hardware Level-0 trigger become a limitation, especially for fully hadronic final states. In order to maintain a high signal efficiency the upgraded LHCb detector will deploy two novel concepts: a triggerless readout and a full software trigger.
△ Less
Submitted 18 October, 2014;
originally announced October 2014.
-
Performance of the LHCb High Level Trigger in 2012
Authors:
J. Albrecht,
V. V. Gligorov,
G. Raven,
S. Tolk
Abstract:
The trigger system of the LHCb experiment is discussed in this paper and its performance is evaluated on a dataset recorded during the 2012 run of the LHC. The main purpose of the LHCb trigger system is to separate heavy flavour signals from the light quark background. The trigger reduces the roughly 11MHz of bunch-bunch crossings with inelastic collisions to a rate of 5kHz, which is written to st…
▽ More
The trigger system of the LHCb experiment is discussed in this paper and its performance is evaluated on a dataset recorded during the 2012 run of the LHC. The main purpose of the LHCb trigger system is to separate heavy flavour signals from the light quark background. The trigger reduces the roughly 11MHz of bunch-bunch crossings with inelastic collisions to a rate of 5kHz, which is written to storage.
△ Less
Submitted 31 October, 2013;
originally announced October 2013.
-
Absolute luminosity measurements with the LHCb detector at the LHC
Authors:
The LHCb Collaboration,
R. Aaij,
B. Adeva,
M. Adinolfi,
C. Adrover,
A. Affolder,
Z. Ajaltouni,
J. Albrecht,
F. Alessio,
M. Alexander,
G. Alkhazov,
P. Alvarez Cartelle,
A. A. Alves Jr,
S. Amato,
Y. Amhis,
J. Anderson,
R. B. Appleby,
O. Aquines Gutierrez,
F. Archilli,
L. Arrabito,
A. Artamonov,
M. Artuso,
E. Aslanides,
G. Auriemma,
S. Bachmann
, et al. (549 additional authors not shown)
Abstract:
Absolute luminosity measurements are of general interest for colliding-beam experiments at storage rings. These measurements are necessary to determine the absolute cross-sections of reaction processes and are valuable to quantify the performance of the accelerator. Using data taken in 2010, LHCb has applied two methods to determine the absolute scale of its luminosity measurements for proton-prot…
▽ More
Absolute luminosity measurements are of general interest for colliding-beam experiments at storage rings. These measurements are necessary to determine the absolute cross-sections of reaction processes and are valuable to quantify the performance of the accelerator. Using data taken in 2010, LHCb has applied two methods to determine the absolute scale of its luminosity measurements for proton-proton collisions at the LHC with a centre-of-mass energy of 7 TeV. In addition to the classic "van der Meer scan" method a novel technique has been developed which makes use of direct imaging of the individual beams using beam-gas and beam-beam interactions. This beam imaging method is made possible by the high resolution of the LHCb vertex detector and the close proximity of the detector to the beams, and allows beam parameters such as positions, angles and widths to be determined. The results of the two methods have comparable precision and are in good agreement. Combining the two methods, an overall precision of 3.5% in the absolute luminosity determination is reached. The techniques used to transport the absolute luminosity calibration to the full 2010 data-taking period are presented.
△ Less
Submitted 11 January, 2012; v1 submitted 13 October, 2011;
originally announced October 2011.
-
Ferromagnetic/superconducting bilayer structure: A model system for spin diffusion length estimation
Authors:
S. Soltan,
J. Albrecht,
H. --U. Habermeier
Abstract:
We report detailed studies on ferromagnet--superconductor bilayer structures. Epitaxial bilayer structures of half metal--colossal magnetoresistive La$_{\mathrm{2/3}}$Ca$_{\mathrm{1/3}}$MnO$_{\mathrm{3}}$ (HM--CMR) and high--$T_{\mathrm{c}}$ superconducting YBa$_{\mathrm{2}}$Cu$_{\mathrm{3}}$O$_{\mathrm{7-δ}}$(HTSC) are grown on SrTiO$_3$ (100) single--crystalline substrates using pulsed laser d…
▽ More
We report detailed studies on ferromagnet--superconductor bilayer structures. Epitaxial bilayer structures of half metal--colossal magnetoresistive La$_{\mathrm{2/3}}$Ca$_{\mathrm{1/3}}$MnO$_{\mathrm{3}}$ (HM--CMR) and high--$T_{\mathrm{c}}$ superconducting YBa$_{\mathrm{2}}$Cu$_{\mathrm{3}}$O$_{\mathrm{7-δ}}$(HTSC) are grown on SrTiO$_3$ (100) single--crystalline substrates using pulsed laser deposition. Magnetization $M$(T) measurements show the coexistence of ferromagnetism and superconductivity in these structures at low temperatures. Using the HM--CMR layer as an electrode for spin polarized electrons, we discuss the role of spin polarized self injection into the HTSC layer. The experimental results are in good agreement with a presented theoretical estimation, where the spin diffusion length $ξ_{\mathrm {FM}}$ is found to be in the range of $ξ_{\mathrm{FM}} \approx$ 10 nm.
△ Less
Submitted 23 August, 2004;
originally announced August 2004.
