-
Microheater actuators as a versatile platform for strain engineering in 2D materials
Authors:
Yu Kyoung Ryu,
Felix Carrascoso,
Rubén López-Nebreda,
Nicolás Agraït,
Riccardo Frisenda,
Andres Castellanos-Gomez
Abstract:
We present microfabricated thermal actuators to engineer the biaxial strain in two-dimensional (2D) materials. These actuators are based on microheater circuits patterned onto the surface of a polymer with a high thermal expansion coefficient. By running current through the microheater one can vary the temperature of the polymer and induce a controlled biaxial expansion of its surface. This contro…
▽ More
We present microfabricated thermal actuators to engineer the biaxial strain in two-dimensional (2D) materials. These actuators are based on microheater circuits patterned onto the surface of a polymer with a high thermal expansion coefficient. By running current through the microheater one can vary the temperature of the polymer and induce a controlled biaxial expansion of its surface. This controlled biaxial expansion can be transduced to biaxial strain to 2D materials, placed onto the polymer surface, which in turn induces a shift of the optical spectrum. Our thermal strain actuators can reach a maximum biaxial strain of 0.64 % and they can be modulated at frequencies up to 8 Hz. The compact geometry of these actuators results in a negligible spatial drift of 0.03 um/deg, which facilitates their integration in optical spectroscopy measurements. We illustrate the potential of this strain engineering platform to fabricate a strain-actuated optical modulator with single-layer MoS2.
△ Less
Submitted 11 June, 2020;
originally announced June 2020.
-
Fast Yet Quantum-Efficient Few-Layer Vertical MoS2 Photodetectors
Authors:
David Maeso,
Andres Castellanos-Gomez,
Nicolas Agraït,
Gabino Rubio-Bollinger
Abstract:
Semiconducting 2D materials, such as molybdenum disulfide (MoS2) and other members of the transition metal dichalcogenide family, have emerged as promising materials for applications in high performance nanoelectronics that exhibit excellent electrical and optical properties. Highly efficient photocurrent (PC) generation is reported in vertical few layer MoS2 devices contacted with semitransparent…
▽ More
Semiconducting 2D materials, such as molybdenum disulfide (MoS2) and other members of the transition metal dichalcogenide family, have emerged as promising materials for applications in high performance nanoelectronics that exhibit excellent electrical and optical properties. Highly efficient photocurrent (PC) generation is reported in vertical few layer MoS2 devices contacted with semitransparent metallic electrodes. The light absorption of the device can be improved by fabricating vertical photodevices using few layer flakes, achieving a photoresponse of up to 0.11 A/W and an external quantum efficiency (EQE) of up to 30%. Because of the vertical design, the distance between electrodes can be kept in the range of a few nanometers, thus substantially reducing the collection time of photogenerated carriers and increasing the efficiency of the devices. The wavelength dependent PC, photoresponsivity, and EQE are measured over a photon energy range from 1.24 to 2.58 eV. Compared to previous in plane and vertical devices, these vertical few layer MoS2 photodevices exhibit very short response time, 60 ns, and a cutoff frequency of 5.5 MHz, while maintaining high photoresponsivity.
△ Less
Submitted 23 May, 2019;
originally announced May 2019.
-
Strong Modulation of Optical Properties in Rippled 2D GaSe via Strain Engineering
Authors:
David Maeso,
Sahar Pakdel,
Hernan Santos,
Nicolas Agrait,
Juan Jose Palacios,
Elsa Prada,
Gabino Rubio-Bollinger
Abstract:
Few-layer GaSe is one of the latest additions to the family of 2D semiconducting crystals whose properties under strain are still relatively unexplored. Here, we study rippled nanosheets that exhibit a periodic compressive and tensile strain of up to 5%. The strain profile modifies the local optoelectronic properties of the alternating compressive and tensile regions, which translates into a remar…
▽ More
Few-layer GaSe is one of the latest additions to the family of 2D semiconducting crystals whose properties under strain are still relatively unexplored. Here, we study rippled nanosheets that exhibit a periodic compressive and tensile strain of up to 5%. The strain profile modifies the local optoelectronic properties of the alternating compressive and tensile regions, which translates into a remarkable shift of the optical absorption band-edge of up to 1.2 eV between crests and valleys. Our experimental observations are supported by theoretical results from density functional theory calculations performed for monolayers and multilayers (up to 7 layers) under tensile and compressive strain. This large band gap tunability can be explained through a combined analysis of the elastic response of Ga atoms to strain and the symmetry of the wave functions.
△ Less
Submitted 6 March, 2019;
originally announced March 2019.
-
Photodiodes based in La0.7Sr0.3MnO3/single layer MoS2 hybrid vertical heterostructures
Authors:
Yue Niu,
Riccardo Frisenda,
Simon A. Svatek,
Gloria Orfila,
Fernando Gallego,
Patricia Gant,
Nicolás Agraït,
Carlos León,
Alberto Rivera-Calzada,
David Perez De Lara,
Jacobo Santamaría,
Andres Castellanos-Gomez
Abstract:
The fabrication of artificial materials by stacking of individual two-dimensional (2D) materials is amongst one of the most promising research avenues in the field of 2D materials. Moreover, this strategy to fabricate new man-made materials can be further extended by fabricating hybrid stacks between 2D materials and other functional materials with different dimensionality making the potential num…
▽ More
The fabrication of artificial materials by stacking of individual two-dimensional (2D) materials is amongst one of the most promising research avenues in the field of 2D materials. Moreover, this strategy to fabricate new man-made materials can be further extended by fabricating hybrid stacks between 2D materials and other functional materials with different dimensionality making the potential number of combinations almost infinite. Among all these possible combinations, mixing 2D materials with transition metal oxides can result especially useful because of the large amount of interesting physical phenomena displayed separately by these two material families. We present a hybrid device based on the stacking of a single layer MoS2 onto a lanthanum strontium manganite (La0.7Sr0.3MnO3) thin film, creating an atomically thin device. It shows a rectifying electrical transport with a ratio of 103, and a photovoltaic effect with Voc up to 0.4 V. The photodiode behaviour arises as a consequence of the different doping character of these two materials. This result paves the way towards combining the efforts of these two large materials science communities.
△ Less
Submitted 19 June, 2017;
originally announced June 2017.
-
Lithography-free electrical transport measurements on 2D materials by direct microprobing
Authors:
Patricia Gant,
Yue Niu,
Simon A. Svatek,
Nicolás Agraït,
Carmen Munuera,
Mar García- Hernández,
Riccardo Frisenda,
David Perez de Lara,
Andres Castellanos-Gomez
Abstract:
We present a method to carry out electrical and opto-electronic measurements on 2D materials using carbon fiber microprobes to directly make electrical contacts to the 2D materials without damaging them. The working principle of this microprobing method is illustrated by measuring transport in MoS2 flakes in vertical (transport in the out-of-plane direction) and lateral (transport within the cryst…
▽ More
We present a method to carry out electrical and opto-electronic measurements on 2D materials using carbon fiber microprobes to directly make electrical contacts to the 2D materials without damaging them. The working principle of this microprobing method is illustrated by measuring transport in MoS2 flakes in vertical (transport in the out-of-plane direction) and lateral (transport within the crystal plane) configurations, finding performances comparable to those reported for MoS2 devices fabricated by conventional lithographic process. We also show that this method can be used with other 2D materials.
△ Less
Submitted 20 May, 2017;
originally announced May 2017.
-
Long-range Scanning Tunneling Microscope for the study of nanostructures on insulating substrates
Authors:
Aday Molina-Mendoza,
José Gabriel Rodrigo,
Joshua Island,
Enrique Burzuri,
Gabino Rubio-Bollinger,
Herre S. J. van der Zant,
Nicolás Agraït
Abstract:
The Scanning Tunneling Microscope is a powerful tool for studying the electronic properties at the atomic level, however it's relatively small scanning range and the fact that it can only operate on conducting samples prevents its application to study heterogeneous samples consisting on conducting and insulating regions. Here we present a long-range scanning tunneling microscope capable of detecti…
▽ More
The Scanning Tunneling Microscope is a powerful tool for studying the electronic properties at the atomic level, however it's relatively small scanning range and the fact that it can only operate on conducting samples prevents its application to study heterogeneous samples consisting on conducting and insulating regions. Here we present a long-range scanning tunneling microscope capable of detecting conducting micro and nanostructures on insulating substrates using a technique based on the capacitance between the tip and the sample and performing STM studies.
△ Less
Submitted 23 October, 2013; v1 submitted 20 September, 2013;
originally announced September 2013.
-
Calibration of piezoelectric positioning actuators using a reference voltage-to-displacement transducer based on quartz tuning forks
Authors:
Andres Castellanos-Gomez,
Carlos R. Arroyo,
Nicolás Agraït,
Gabino Rubio-Bollinger
Abstract:
We use a piezoelectric quartz tuning fork to calibrate the displacement of ceramic piezoelectric scanners which are widely employed in scanning probe microscopy. We measure the static piezoelectric response of a quartz tuning fork and find it to be highly linear, non-hysteretic and with negligible creep. These performance characteristics, close to those of an ideal transducer, make quartz transduc…
▽ More
We use a piezoelectric quartz tuning fork to calibrate the displacement of ceramic piezoelectric scanners which are widely employed in scanning probe microscopy. We measure the static piezoelectric response of a quartz tuning fork and find it to be highly linear, non-hysteretic and with negligible creep. These performance characteristics, close to those of an ideal transducer, make quartz transducers superior to ceramic piezoelectric actuators. Furthermore, quartz actuators in the form of a tuning fork have the advantage of yielding static displacements comparable to those of local probe microscope scanners. We use the static displacement of a quartz tuning fork as a reference to calibrate the three axis displacement of a ceramic piezoelectric scanner. Although this calibration technique is a non-traceable method, it can be more versatile than using calibration grids because it enables to characterize the linear and non-linear response of a piezoelectric scanner in a broad range of displacements, spanning from a fraction of a nanometer to hundreds of nanometers. In addition, the creep and the speed dependent piezoelectric response of ceramic scanners can be studied in detail.
△ Less
Submitted 26 March, 2012;
originally announced March 2012.
-
Carbon fibre tips for scanning probe microscopy based on quartz tuning fork force sensors
Authors:
Andres Castellanos-Gomez,
Nicolas Agraït,
Gabino Rubio-Bollinger
Abstract:
We report the fabrication and the characterization of carbon fibre tips for their use in combined scanning tunnelling and force microscopy based on piezoelectric quartz tuning fork force sensors. We find that the use of carbon fibre tips results in a minimum impact on the dynamics of quartz tuning fork force sensors yielding a high quality factor and consequently a high force gradient sensitivity.…
▽ More
We report the fabrication and the characterization of carbon fibre tips for their use in combined scanning tunnelling and force microscopy based on piezoelectric quartz tuning fork force sensors. We find that the use of carbon fibre tips results in a minimum impact on the dynamics of quartz tuning fork force sensors yielding a high quality factor and consequently a high force gradient sensitivity. This high force sensitivity in combination with high electrical conductivity and oxidation resistance of carbon fibre tips make them very convenient for combined and simultaneous scanning tunnelling microscopy and atomic force microscopy measurements. Interestingly, these tips are quite robust against occasionally occurring tip crashes. An electrochemical fabrication procedure to etch the tips is presented that produces a sub-100 nm apex radius in a reproducible way which can yield high resolution images.
△ Less
Submitted 12 March, 2010;
originally announced March 2010.
-
Dynamics of quartz tuning fork force sensors used in scanning probe microscopy
Authors:
Andres Castellanos-Gomez,
Nicolas Agraït,
Gabino Rubio-Bollinger
Abstract:
We have performed an experimental characterization of the dynamics of oscillating quartz tuning forks which are being increasingly used in scanning probe microscopy as force sensors. We show that tuning forks can be described as a system of coupled oscillators. Nevertheless, this description requires the knowledge of the elastic coupling constant between the prongs of the tuning fork, which has no…
▽ More
We have performed an experimental characterization of the dynamics of oscillating quartz tuning forks which are being increasingly used in scanning probe microscopy as force sensors. We show that tuning forks can be described as a system of coupled oscillators. Nevertheless, this description requires the knowledge of the elastic coupling constant between the prongs of the tuning fork, which has not yet been measured. Therefore tuning forks have been usually described within the single oscillator or the weakly coupled oscillators approximation that neglects the coupling between the prongs. We propose three different procedures to measure the elastic coupling constant: an opto-mechanical method, a variation of the Cleveland method and a thermal noise based method. We find that the coupling between the quartz tuning fork prongs has a strong influence on the dynamics and the measured motion is in remarkable agreement with a simple model of coupled harmonic oscillators. The precise determination of the elastic coupling between the prongs of a tuning fork allows to obtain a quantitative relation between the resonance frequency shift and the force gradient acting at the free end of a tuning fork prong.
△ Less
Submitted 12 March, 2010;
originally announced March 2010.
