-
Spinning Twisted Ribbons: When Two Holes Meet on a Curved Liquid Film
Authors:
Jack H. Y. Lo,
Yuan Liu,
Tariq Alghamdi,
Muhammad F. Afzaal,
S. T. Thoroddsen
Abstract:
The rupture of a liquid film, where a thin liquid layer between two other fluids breaks and forms holes, commonly occurs in both natural phenomena and industrial applications. The post-rupture dynamics, from initial hole formation to the complete collapse of the film, are crucial because they govern droplet formation, which plays a significant role in many applications such as disease transmission…
▽ More
The rupture of a liquid film, where a thin liquid layer between two other fluids breaks and forms holes, commonly occurs in both natural phenomena and industrial applications. The post-rupture dynamics, from initial hole formation to the complete collapse of the film, are crucial because they govern droplet formation, which plays a significant role in many applications such as disease transmission, aerosol formation, spray drying nanodrugs, oil spill remediation, inkjet printing, and spray coating. While single-hole rupture has been extensively studied, the dynamics of multiple-hole ruptures, especially the interactions between neighboring holes, are less well understood. Here, this study reveals that when two holes 'meet' on a curved film, the film evolves into a spinning twisted ribbon before breaking into droplets, distinctly different from what occurs on flat films. We explain the formation and evolution of the spinning twisted ribbon, including its geometry, corrugations, ligaments, and orbits, and compare the experimental observations with models. We compare and contrast this phenomena with its counterpart on planar films. While our experiments are based on the multiple-hole ruptures in corona splash, the underlying principles are likely applicable to other systems. This study sheds light on understanding and controlling droplet formation in multiple-hole rupture, improving public health, climate science, and various industrial applications.
△ Less
Submitted 30 June, 2025; v1 submitted 15 November, 2024;
originally announced November 2024.
-
The new APD-Based Readout of the Crystal Barrel Calorimeter -- An Overview
Authors:
CBELSA/TAPS Collaboration,
:,
C. Honisch,
P. Klassen,
J. Müllers,
M. Urban,
F. Afzal,
J. Bieling,
S. Ciupka,
J. Hartmann,
P. Hoffmeister,
M. Lang,
D. Schaab,
C. Schmidt,
M. Steinacher,
D. Walther,
R. Beck,
K. -T. Brinkmann,
V. Crede,
H. Dutz,
D. Elsner,
W. Erni,
E. Fix,
F. Frommberger,
M. Grüner
, et al. (26 additional authors not shown)
Abstract:
The Crystal Barrel is an electromagnetic calorimeter consisting of 1380 CsI(Tl) scintillators, and is currently installed at the CBELSA/TAPS experiment where it is used to detect decay products from photoproduction of mesons. The readout of the Crystal Barrel has been upgraded in order to integrate the detector into the first level of the trigger and to increase its sensitivity for neutral final s…
▽ More
The Crystal Barrel is an electromagnetic calorimeter consisting of 1380 CsI(Tl) scintillators, and is currently installed at the CBELSA/TAPS experiment where it is used to detect decay products from photoproduction of mesons. The readout of the Crystal Barrel has been upgraded in order to integrate the detector into the first level of the trigger and to increase its sensitivity for neutral final states. The new readout uses avalanche photodiodes in the front-end and a dual back-end with branches optimized for energy and time measurement, respectively. An FPGA-based cluster finder processes the whole hit pattern within less than 100 ns. The important downside of APDs -- the temperature dependence of their gain -- is handled with a temperature stabilization and a compensating bias voltage supply. Additionally, a light pulser system allows the APDs' gains to be measured during beamtimes.
△ Less
Submitted 16 January, 2023; v1 submitted 23 December, 2022;
originally announced December 2022.
-
O-Band Subwavelength Grating Filters in a Monolithic Photonics Technology
Authors:
Francis O. Afzal,
Yusheng Bian,
Bo Peng,
Shuren Hu,
Kevin Dezfulian,
Karen Nummy,
Andy Stricker,
Abdelsalam Aboketaf,
Crystal Hedges,
Zoey Sowinski,
Michal Rakowski,
Won Suk Lee,
Rod Augur,
Dave Riggs,
Ken Giewont,
Sharon M. Weiss
Abstract:
The data communications industry has begun transitioning from electrical to optical interconnects in datacenters in order to overcome performance bottlenecks and meet consumer needs. To mitigate the costs associated with this change and achieve performance for 5G and beyond, it is crucial to explore advanced photonic devices that can enable high-bandwidth interconnects via wavelength-division mult…
▽ More
The data communications industry has begun transitioning from electrical to optical interconnects in datacenters in order to overcome performance bottlenecks and meet consumer needs. To mitigate the costs associated with this change and achieve performance for 5G and beyond, it is crucial to explore advanced photonic devices that can enable high-bandwidth interconnects via wavelength-division multiplexing (WDM) in photonic integrated circuits. Subwavelength grating (SWG) filters have shown great promise for WDM applications. However, the small feature sizes necessary to implement these structures have prohibited them from penetrating into industrial applications. To explore the manufacturability and performance of SWG filters in an industrial setting, we fabricate and characterize O-band subwavelength grating filters using the monolithic photonics technology at GLOBALFOUNDRIES (GF). We demonstrate a low drop channel loss of -1.2 dB with a flat-top response, a high extinction ratio of -30 dB, a 3 dB channel width of 5 nm and single-source thermal tunability without shape distortion. This filter structure was designed using elements from the product design kit provided by GF and functions in a compact footprint of 0.002 mm2 with a minimum feature size of 150 nm.
△ Less
Submitted 30 April, 2020;
originally announced May 2020.
-
Camera detection and modal fingerprinting of photonic crystal nanobeam resonances
Authors:
Francis O. Afzal,
Joshua M. Petrin,
Sharon M. Weiss
Abstract:
We demonstrate in simulation and experiment that the out-of-plane, far-field scattering profile of resonance modes in photonic crystal nanobeam (PCN) cavities can be used to identify resonance mode order. Through detection of resonantly scattered light with an infrared camera, the overlap between optical resonance modes and the leaky region of k-space can be measured experimentally. Mode order dep…
▽ More
We demonstrate in simulation and experiment that the out-of-plane, far-field scattering profile of resonance modes in photonic crystal nanobeam (PCN) cavities can be used to identify resonance mode order. Through detection of resonantly scattered light with an infrared camera, the overlap between optical resonance modes and the leaky region of k-space can be measured experimentally. Mode order dependent overlap with the leaky region enables usage of resonance scattering as a "fingerprint" by which resonant modes in nanophotonic structures can be identified via detection in the far-field. By selectively observing emission near the PCN cavity region, the resonant scattering profile of the device can be spatially isolated and the signal noise introduced by other elements in the transmission line can be significantly reduced, consequently improving the signal to noise ratio (SNR) of resonance detection. This work demonstrates an increase in SNR of ~19 dB in out-of-plane scattering measurements over in-plane transmission measurements. The capabilities demonstrated here may be applied to improve characterization across nanophotonic devices with mode-dependent spatial field profiles and enhance the utility of these devices across a variety of applications.
△ Less
Submitted 14 March, 2019;
originally announced March 2019.
-
High-Throughput Computational Studies in Catalysis and Materials Research, and their Impact on Rational Design
Authors:
Mohammad Atif Faiz Afzal,
Johannes Hachmann
Abstract:
In the 21st century, many technology fields have become reliant on advancements in process automation. We have seen dramatic growth in areas and industries that have successfully implemented a high level of automation. In drug discovery, for example, it has alleviated an otherwise extremely complex and tedious process and has resulted in the development of several new drugs. Over the last decade,…
▽ More
In the 21st century, many technology fields have become reliant on advancements in process automation. We have seen dramatic growth in areas and industries that have successfully implemented a high level of automation. In drug discovery, for example, it has alleviated an otherwise extremely complex and tedious process and has resulted in the development of several new drugs. Over the last decade, these automation techniques have begun being adapted in the chemical and materials community as well with the goal of exploring chemical space and pursuing the discovery and design of novel compounds for various applications. The impact of new materials on industrial and economic development has been stimulating tremendous research efforts by the materials community, and embracing automation as well as tools from computational and data science have led to acceleration and streamlining of the discovery process. In particular, virtual high-throughput screening (HTPS) is now becoming a mainstream technique to search for materials with properties that are tailored for specific applications. Its efficiency combined with the increasing availability of open-source codes and large computational resources makes it a powerful and attractive tool in materials research. Herein, we will review a selection of recent, high-profile HTPS projects for new materials and catalysts. In the case of catalysts, we focus on the HTPS studies for oxygen reduction reaction, oxygen evolution reaction, hydrogen evolution reaction, and carbon dioxide reduction reaction. Whereas, for other materials applications, we emphasize on the HTPS studies for photovoltaics, gas separation, high-refractive-index materials, and OLEDs.
△ Less
Submitted 10 February, 2019;
originally announced February 2019.
-
Efficient side-coupling to photonic crystal nanobeam cavities via state-space overlap
Authors:
Francis O. Afzal,
Sami I. Halimi,
Sharon M. Weiss
Abstract:
We present design guidelines for realizing side-coupled photonic crystal nanobeam (PCN) cavities with efficient coupling to low order resonances through adjusting the overlap of the PCN cavity mode and a feeding bus waveguide in both physical and k-space. We show that optimal side-coupled configurations function at a non-zero k-vector offset between the bus waveguide and PCN cavity modes. The stra…
▽ More
We present design guidelines for realizing side-coupled photonic crystal nanobeam (PCN) cavities with efficient coupling to low order resonances through adjusting the overlap of the PCN cavity mode and a feeding bus waveguide in both physical and k-space. We show that optimal side-coupled configurations function at a non-zero k-vector offset between the bus waveguide and PCN cavity modes. The straightforward design of side-coupled PCNs with high contrast resonances opens the door to their practical implementation in multiplexed, on-chip photonic devices.
△ Less
Submitted 20 December, 2018; v1 submitted 23 May, 2018;
originally announced May 2018.
-
Determining the dominant partial wave contributions from angular distributions of single- and double-polarization observables in pseudoscalar meson photoproduction
Authors:
Y. Wunderlich,
F. Afzal,
A. Thiel,
R. Beck
Abstract:
This work presents a simple method to determine the significant partial wave contributions to experimentally determined observables in pseudoscalar meson photoproduction. First, fits to angular distributions are presented and the maximum orbital angular momentum $\text{L}_{\mathrm{max}}$ needed to achieve a good fit is determined. Then, recent polarization measurements for…
▽ More
This work presents a simple method to determine the significant partial wave contributions to experimentally determined observables in pseudoscalar meson photoproduction. First, fits to angular distributions are presented and the maximum orbital angular momentum $\text{L}_{\mathrm{max}}$ needed to achieve a good fit is determined. Then, recent polarization measurements for $γp \rightarrow π^{0} p$ from ELSA, GRAAL, JLab and MAMI are investigated according to the proposed method. This method allows us to project high-spin partial wave contributions to any observable as long as the measurement has the necessary statistical accuracy. We show, that high precision and large angular coverage in the polarization data are needed in order to be sensitive to high-spin resonance-states and thereby also for the finding of small resonance contributions. This task can be achieved via interference of these resonances with the well-known states. For the channel $γp \rightarrow π^{0} p$, those are the $N(1680)\frac{5}{2}^{+}$ and $Δ(1950)\frac{7}{2}^{+}$, contributing to the $F$-waves.
△ Less
Submitted 19 September, 2020; v1 submitted 2 November, 2016;
originally announced November 2016.
