-
Infrared Imaging of Photochromic Contrast in Thiazolothiazole-Embedded Polymer Films
Authors:
Nuren Z. Shuchi,
Tyler J. Adams,
Naz F. Tumpa,
Dustin Louisos,
Glenn D. Boreman,
Michael G. Walter,
Tino Hofmann
Abstract:
The increasing demand for optical technologies with dynamic spectral control has driven interest in chromogenic materials, particularly for applications in tunable infrared metasurfaces. Phase-change materials such as vanadium dioxide and germanium-antimony-tellurium, for instance, have been widely used in the infrared regime. However, their reliance on thermal and electrical tuning introduces cha…
▽ More
The increasing demand for optical technologies with dynamic spectral control has driven interest in chromogenic materials, particularly for applications in tunable infrared metasurfaces. Phase-change materials such as vanadium dioxide and germanium-antimony-tellurium, for instance, have been widely used in the infrared regime. However, their reliance on thermal and electrical tuning introduces challenges such as high power consumption, limited emissivity tuning, and slow modulation speeds. Photochromic materials may offer an alternative approach to dynamic infrared metasurfaces, potentially overcoming these limitations through rapid, light-induced changes in optical properties. This manuscript explores the potential of thiazolothiazole-embedded polymers, known for their reversible photochromic transitions and strong infrared absorption changes, for tunable infrared metasurfaces. The material exhibits low absorption and a strong photochromic contrast in the spectral range from 1500 cm-1 to 1700 cm-1, making it suitable for dynamic infrared light control. This manuscript reports on infrared imaging experiments demonstrating photochromic contrast in thiazolothiazole-embedded polymer and thereby provides compelling evidence for their potential applications for dynamic infrared metasurfaces.
△ Less
Submitted 15 April, 2025;
originally announced April 2025.
-
Infrared Dielectric Function of Photochromic Thiazolothiazole Embedded Polymer
Authors:
Nuren Z. Shuchi,
Tyler J. Adams,
Naz F. Tumpa,
Dustin Louisos,
Glenn D. Boreman,
Michael G. Walter,
Tino Hofmann
Abstract:
In this paper, the infrared dielectric function of photochromic dipyridinium thiazolo[5,4-d]thiazole embedded in polymer is reported. Bulk thiazolo[5,4-d]thiazole-embedded polymer samples were prepared by drop casting and dehydration in room temperature. The samples were investigated using spectroscopic ellipsometry before and after irradiation with a 405~nm diode laser in the infrared spectral ra…
▽ More
In this paper, the infrared dielectric function of photochromic dipyridinium thiazolo[5,4-d]thiazole embedded in polymer is reported. Bulk thiazolo[5,4-d]thiazole-embedded polymer samples were prepared by drop casting and dehydration in room temperature. The samples were investigated using spectroscopic ellipsometry before and after irradiation with a 405~nm diode laser in the infrared spectral range from 500 cm-1 to 1800 cm-1. The model dielectric functions of the thiazolothiazole embedded polymer film for its TTz2+ (unirradiated) and TTz0 (irradiated) states are composed of a series of Lorentz oscillators in the measured spectral range. A comparison of the obtained complex dielectric functions for the TTz2+ and TTz0 states shows that the oscillators located in the spectral ranges 500 cm-1 - 700 cm-1, 1300 cm-1 - 1400 cm-1, and 1500 cm-1 - 1700 cm-1 change in both amplitude and resonant frequency upon transition between the states. Additionally, a resonance at approximately 1050 cm-1 exhibited a change in oscillator amplitude but not resonant frequency due to the photochromic transition.
△ Less
Submitted 27 March, 2025;
originally announced March 2025.
-
Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter
Authors:
M. Aamir,
G. Adamov,
T. Adams,
C. Adloff,
S. Afanasiev,
C. Agrawal,
C. Agrawal,
A. Ahmad,
H. A. Ahmed,
S. Akbar,
N. Akchurin,
B. Akgul,
B. Akgun,
R. O. Akpinar,
E. Aktas,
A. Al Kadhim,
V. Alexakhin,
J. Alimena,
J. Alison,
A. Alpana,
W. Alshehri,
P. Alvarez Dominguez,
M. Alyari,
C. Amendola,
R. B. Amir
, et al. (550 additional authors not shown)
Abstract:
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadr…
▽ More
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated.
△ Less
Submitted 18 December, 2024; v1 submitted 17 June, 2024;
originally announced June 2024.
-
Learning from the Pandemic: the Future of Meetings in HEP and Beyond
Authors:
Mark S. Neubauer,
Todd Adams,
Jennifer Adelman-McCarthy,
Gabriele Benelli,
Tulika Bose,
David Britton,
Pat Burchat,
Joel Butler,
Timothy A. Cartwright,
Tomáš Davídek,
Jacques Dumarchez,
Peter Elmer,
Matthew Feickert,
Ben Galewsky,
Mandeep Gill,
Maciej Gladki,
Aman Goel,
Jonathan E. Guyer,
Bo Jayatilaka,
Brendan Kiburg,
Benjamin Krikler,
David Lange,
Claire Lee,
Nick Manganelli,
Giovanni Marchiori
, et al. (14 additional authors not shown)
Abstract:
The COVID-19 pandemic has by-and-large prevented in-person meetings since March 2020. While the increasing deployment of effective vaccines around the world is a very positive development, the timeline and pathway to "normality" is uncertain and the "new normal" we will settle into is anyone's guess. Particle physics, like many other scientific fields, has more than a year of experience in holding…
▽ More
The COVID-19 pandemic has by-and-large prevented in-person meetings since March 2020. While the increasing deployment of effective vaccines around the world is a very positive development, the timeline and pathway to "normality" is uncertain and the "new normal" we will settle into is anyone's guess. Particle physics, like many other scientific fields, has more than a year of experience in holding virtual meetings, workshops, and conferences. A great deal of experimentation and innovation to explore how to execute these meetings effectively has occurred. Therefore, it is an appropriate time to take stock of what we as a community learned from running virtual meetings and discuss possible strategies for the future. Continuing to develop effective strategies for meetings with a virtual component is likely to be important for reducing the carbon footprint of our research activities, while also enabling greater diversity and inclusion for participation. This report summarizes a virtual two-day workshop on Virtual Meetings held May 5-6, 2021 which brought together experts from both inside and outside of high-energy physics to share their experiences and practices with organizing and executing virtual workshops, and to develop possible strategies for future meetings as we begin to emerge from the COVID-19 pandemic. This report outlines some of the practices and tools that have worked well which we hope will serve as a valuable resource for future virtual meeting organizers in all scientific fields.
△ Less
Submitted 29 June, 2021;
originally announced June 2021.
-
Numerical generation of vector potentials from specified magnetic fields
Authors:
Zachary J. Silberman,
Thomas R. Adams,
Joshua A. Faber,
Zachariah B. Etienne,
Ian Ruchlin
Abstract:
Many codes have been developed to study highly relativistic, magnetized flows around and inside compact objects. Depending on the adopted formalism, some of these codes evolve the vector potential $\mathbf{A}$, and others evolve the magnetic field $\mathbf{B}=\nabla\times\mathbf{A}$ directly. Given that these codes possess unique strengths, sometimes it is desirable to start a simulation using a c…
▽ More
Many codes have been developed to study highly relativistic, magnetized flows around and inside compact objects. Depending on the adopted formalism, some of these codes evolve the vector potential $\mathbf{A}$, and others evolve the magnetic field $\mathbf{B}=\nabla\times\mathbf{A}$ directly. Given that these codes possess unique strengths, sometimes it is desirable to start a simulation using a code that evolves $\mathbf{B}$ and complete it using a code that evolves $\mathbf{A}$. Thus transferring the data from one code to another would require an inverse curl algorithm. This paper describes two new inverse curl techniques in the context of Cartesian numerical grids: a cell-by-cell method, which scales approximately linearly with the numerical grid, and a global linear algebra approach, which has worse scaling properties but is generally more robust (e.g., in the context of a magnetic field possessing some nonzero divergence). We demonstrate these algorithms successfully generate smooth vector potential configurations in challenging special and general relativistic contexts.
△ Less
Submitted 27 March, 2018;
originally announced March 2018.
-
GEO 600 and the GEO-HF upgrade program: successes and challenges
Authors:
K. L. Dooley,
J. R. Leong,
T. Adams,
C. Affeldt,
A. Bisht,
C. Bogan,
J. Degallaix,
C. Gräf,
S. Hild,
J. Hough,
A. Khalaidovski,
N. Lastzka,
J. Lough,
H. Lück,
D. Macleod,
L. Nuttall,
M. Prijatelj,
R. Schnabel,
E. Schreiber,
J. Slutsky,
B. Sorazu,
K. A. Strain,
H. Vahlbruch,
M. Was,
B. Willke
, et al. (3 additional authors not shown)
Abstract:
The German-British laser-interferometric gravitational wave detector GEO 600 is in its 14th year of operation since its first lock in 2001. After GEO 600 participated in science runs with other first-generation detectors, a program known as GEO-HF began in 2009. The goal was to improve the detector sensitivity at high frequencies, around 1 kHz and above, with technologically advanced yet minimally…
▽ More
The German-British laser-interferometric gravitational wave detector GEO 600 is in its 14th year of operation since its first lock in 2001. After GEO 600 participated in science runs with other first-generation detectors, a program known as GEO-HF began in 2009. The goal was to improve the detector sensitivity at high frequencies, around 1 kHz and above, with technologically advanced yet minimally invasive upgrades. Simultaneously, the detector would record science quality data in between commissioning activities. As of early 2014, all of the planned upgrades have been carried out and sensitivity improvements of up to a factor of four at the high-frequency end of the observation band have been achieved. Besides science data collection, an experimental program is ongoing with the goal to further improve the sensitivity and evaluate future detector technologies. We summarize the results of the GEO-HF program to date and discuss its successes and challenges.
△ Less
Submitted 19 January, 2016; v1 submitted 1 October, 2015;
originally announced October 2015.
-
Experimental demonstration of Luneburg waveguides
Authors:
Vera N. Smolyaninova,
David Lahneman,
Todd Adams,
Thomas Gresock,
Kathryn Zander,
Christopher Jensen,
Igor I. Smolyaninov
Abstract:
Transformation optics gives rise to numerous unusual optical devices, such as novel metamaterial lenses and invisibility cloaks. Very recently Mattheakis et al. have suggested theoretical design of an optical waveguide based on a network of Luneburg lenses, which may be useful in sensing and nonlinear optics applications. Here we report the first experimental realization of such Luneburg waveguide…
▽ More
Transformation optics gives rise to numerous unusual optical devices, such as novel metamaterial lenses and invisibility cloaks. Very recently Mattheakis et al. have suggested theoretical design of an optical waveguide based on a network of Luneburg lenses, which may be useful in sensing and nonlinear optics applications. Here we report the first experimental realization of such Luneburg waveguides. We have studied wavelength and polarization dependent performance of the waveguides.
△ Less
Submitted 10 April, 2015;
originally announced April 2015.
-
Versatile module for experiments with focussing neutron guides
Authors:
T. Adams,
G. Brandl,
A. Chacon,
J. N. Wagner,
M. Rahn,
S. Mühlbauer,
R. Georgii,
C. Pfleiderer,
P. Böni
Abstract:
We report the development of a versatile module that permits fast and reliable use of focussing neutron guides under varying scattering angles. A simple procedure for setting up the module and neutron guides is illustrated by typical intensity patterns to highlight operational aspects as well as typical parasitic artefacts. Combining a high-precision alignment table with separate housings for the…
▽ More
We report the development of a versatile module that permits fast and reliable use of focussing neutron guides under varying scattering angles. A simple procedure for setting up the module and neutron guides is illustrated by typical intensity patterns to highlight operational aspects as well as typical parasitic artefacts. Combining a high-precision alignment table with separate housings for the neutron guides on kinematic mounts, the change-over between neutron guides with different focussing characteristics requires no readjustments of the experimental set-up. Exploiting substantial gain factors, we demonstrate the performance of this versatile neutron scattering module in a study of the effects of uniaxial stress on the domain populations in the transverse spin density wave phase of single crystal Cr.
△ Less
Submitted 2 December, 2014;
originally announced December 2014.
-
Modified Bernoulli Equation for Use with Combined Electro-Osmotic and Pressure-Driven Microflows
Authors:
Thomas M. Adams,
Aditya Raghunandan
Abstract:
In this paper we present electro-osmotic (EO) flow within a more traditional fluid mechanics framework. Specifically, the modified Bernoulli equation (viz. the energy equation, the mechanical energy equation, the pipe flow equation, etc.) is shown to be applicable to EO flows if an electrical potential energy term is also included. The form of the loss term in the modified Bernoulli equation is un…
▽ More
In this paper we present electro-osmotic (EO) flow within a more traditional fluid mechanics framework. Specifically, the modified Bernoulli equation (viz. the energy equation, the mechanical energy equation, the pipe flow equation, etc.) is shown to be applicable to EO flows if an electrical potential energy term is also included. The form of the loss term in the modified Bernoulli equation is unaffected by the presence of an electric field; i.e., the loss term still represents the effect of wall shear stress, which can be represented via a friction factor. We show that that the friction factor for pure EO flow (no applied pressure gradient) varies inversely with the Reynolds number based on the Debeye length of the electric double layer. Expressions for friction factor for combined laminar pressure-driven and EO flow are also given. These are shown to be functions of Reynolds number and geometry, as well as the relative strength of the applied electric field to the applied pressure gradient.
△ Less
Submitted 5 January, 2012;
originally announced January 2012.
-
The D0 Run II Impact Parameter Trigger
Authors:
T. Adams,
Q. An,
K. M. Black,
T. Bose,
N. J. Buchanan,
S. Caron,
D. K. Cho,
S. Choi,
A. Das,
M. Das,
H. Dong,
W. Earle,
H. Evans,
S. N. Fatakia,
L. Feligioni,
T. Fitzpatrick,
E. Hazen,
U. Heintz,
K. Herner,
J. D. Hobbs,
D. Khatidze,
W. M. Lee,
S. L. Linn,
M. Narain,
C. Pancake
, et al. (18 additional authors not shown)
Abstract:
Many physics topics to be studied by the D0 experiment during Run II of the Fermilab Tevatron ppbar collider give rise to final states containing b--flavored particles. Examples include Higgs searches, top quark production and decay studies, and full reconstruction of B decays. The sensitivity to such modes has been significantly enhanced by the installation of a silicon based vertex detector as…
▽ More
Many physics topics to be studied by the D0 experiment during Run II of the Fermilab Tevatron ppbar collider give rise to final states containing b--flavored particles. Examples include Higgs searches, top quark production and decay studies, and full reconstruction of B decays. The sensitivity to such modes has been significantly enhanced by the installation of a silicon based vertex detector as part of the DO detector upgrade for Run II. Interesting events must be identified initially in 100-200 microseconds to be available for later study. This paper describes custom electronics used in the DO trigger system to provide the real--time identification of events having tracks consistent with the decay of b--flavored particles.
△ Less
Submitted 17 January, 2007;
originally announced January 2007.
