-
Mode Recognition by Shape Morphing for Maxwell's Eigenvalue Problem
Authors:
Anna Ziegler,
Niklas Georg,
Wolfgang Ackermann,
Sebastian Schöps
Abstract:
In electrical engineering, for example during the design of superconducting radio-frequency cavities, eigenmodes must be identified based on their field patterns. This allows to understand the working principle, optimize the performance of a device and distinguish desired from parasitic modes. For cavities with simple shapes, the eigenmodes are easily classified according to the number of nodes an…
▽ More
In electrical engineering, for example during the design of superconducting radio-frequency cavities, eigenmodes must be identified based on their field patterns. This allows to understand the working principle, optimize the performance of a device and distinguish desired from parasitic modes. For cavities with simple shapes, the eigenmodes are easily classified according to the number of nodes and antinodes in each direction as is obvious from analytical formulae. For cavities with complicated shapes, the eigenmodes are determined numerically. Thereby, the classification is cumbersome, if not impossible. In this paper, we propose a new recognition method by morphing the cavity geometry to a pillbox and tracking its eigenmodes during the deformation.
△ Less
Submitted 1 March, 2022;
originally announced March 2022.
-
Mitigation of parasitic losses in the quadrupole resonator enabling direct measurements of low residual resistances of SRF samples
Authors:
S. Keckert,
W. Ackermann,
H. De Gersem,
X. Jiang,
A. Ö. Sezgin,
M. Vogel,
M. Wenskat,
R. Kleindienst,
J. Knobloch,
O. Kugeler,
D. Tikhonov
Abstract:
The quadrupole resonator (QPR) is a dedicated sample-test cavity for the RF characterization of superconducting samples in a wide temperature, RF field and frequency range. Its main purpose are high resolution measurements of the surface resistance with direct access to the residual resistance thanks to the low frequency of the first operating quadrupole mode. Besides the well-known high resolutio…
▽ More
The quadrupole resonator (QPR) is a dedicated sample-test cavity for the RF characterization of superconducting samples in a wide temperature, RF field and frequency range. Its main purpose are high resolution measurements of the surface resistance with direct access to the residual resistance thanks to the low frequency of the first operating quadrupole mode. Besides the well-known high resolution of the QPR, a bias of measurement data towards higher values has been observed, especially at higher harmonic quadrupole modes. Numerical studies show that this can be explained by parasitic RF losses on the adapter flange used to mount samples into the QPR. Coating several micrometer of niobium on those surfaces of the stainless steel flange that are exposed to the RF fields significantly reduced this bias, enabling a direct measurement of a residual resistance smaller than 5 n$Ω$ at 2 K and 413 MHz. A constant correction based on simulations was not feasible due to deviations from one measurement to another. However, this issue is resolved given these new results.
△ Less
Submitted 27 October, 2021; v1 submitted 14 October, 2021;
originally announced October 2021.
-
Pickup concepts for ultra-low charged short bunches in X-Ray Free-Electron Lasers
Authors:
Bernhard E. J. Scheible,
Stefano Mattiello,
Marie K. Czwalinna,
Holger Schlarb,
Wolfgang Ackermann,
Herbert De Gersem,
Andreas Penirschke
Abstract:
The all-optical synchronization systems used in various X-ray free-electron lasers (XFEL) such as the European XFEL observe the transient fields of passing electron bunches coupled into one or more pickups in the Bunch Arrival Time Monitors (BAM). The extracted signal is then amplitude modulated on reference laser pulses in a Mach-Zehnder type electro-optical modulator. With the emerging demand fo…
▽ More
The all-optical synchronization systems used in various X-ray free-electron lasers (XFEL) such as the European XFEL observe the transient fields of passing electron bunches coupled into one or more pickups in the Bunch Arrival Time Monitors (BAM). The extracted signal is then amplitude modulated on reference laser pulses in a Mach-Zehnder type electro-optical modulator. With the emerging demand for future experiments with ultra-short FEL shots, fs precision is required for the synchronization systems even with 1 pC bunches. Since the sensitivity of the BAM depends in particular on the slope of the bipolar signal at the zero-crossing and thus, also on the bunch charge, a redesign with the aim of a significant increase by optimized geometry and bandwidth is inevitable. In this contribution the theoretical foundations of the pickup signal are aggregated and treated with a focus on ultra-short bunches as well as a general formulation. A possible new pickup concept is simulated and its performance is compared to the previous concept. A significant improvement of slope and voltage is found. The improvement is mainly achieved by the reduced distance to the beam and a higher bandwidth.
△ Less
Submitted 2 February, 2021;
originally announced February 2021.
-
Uncertainty Quantification for Maxwell's Eigenproblem based on Isogeometric Analysis and Mode Tracking
Authors:
Niklas Georg,
Wolfgang Ackermann,
Jacopo Corno,
Sebastian Schöps
Abstract:
The electromagnetic field distribution as well as the resonating frequency of various modes in superconducting cavities used in particle accelerators for example are sensitive to small geometry deformations. The occurring variations are motivated by measurements of an available set of resonators from which we propose to extract a small number of relevant and independent deformations by using a tru…
▽ More
The electromagnetic field distribution as well as the resonating frequency of various modes in superconducting cavities used in particle accelerators for example are sensitive to small geometry deformations. The occurring variations are motivated by measurements of an available set of resonators from which we propose to extract a small number of relevant and independent deformations by using a truncated Karhunen-Loève expansion. The random deformations are used in an expressive uncertainty quantification workflow to determine the sensitivity of the eigenmodes. For the propagation of uncertainty, a stochastic collocation method based on sparse grids is employed. It requires the repeated solution of Maxwell's eigenvalue problem at predefined collocation points, i.e., for cavities with perturbed geometry. The main contribution of the paper is ensuring the consistency of the solution, i.e., matching the eigenpairs, among the various eigenvalue problems at the stochastic collocation points. To this end, a classical eigenvalue tracking technique is proposed that is based on homotopies between collocation points and a Newton-based eigenvalue solver. The approach can be efficiently parallelized while tracking the eigenpairs. In this paper, we propose the application of isogeometric analysis since it allows for the exact description of the geometrical domains with respect to common computer-aided design kernels, for a straightforward and convenient way of handling geometrical variations and smooth solutions.
△ Less
Submitted 6 March, 2019; v1 submitted 8 February, 2018;
originally announced February 2018.
