-
Future Circular Collider Feasibility Study Report: Volume 2, Accelerators, Technical Infrastructure and Safety
Authors:
M. Benedikt,
F. Zimmermann,
B. Auchmann,
W. Bartmann,
J. P. Burnet,
C. Carli,
A. Chancé,
P. Craievich,
M. Giovannozzi,
C. Grojean,
J. Gutleber,
K. Hanke,
A. Henriques,
P. Janot,
C. Lourenço,
M. Mangano,
T. Otto,
J. Poole,
S. Rajagopalan,
T. Raubenheimer,
E. Todesco,
L. Ulrici,
T. Watson,
G. Wilkinson,
A. Abada
, et al. (1439 additional authors not shown)
Abstract:
In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration hosted by CERN. This report describes the FCC integrated programme, which consists of two stages: an electron-positron collider (FCC-ee) in the first phase, serving as a high-luminosity Higgs, top, and electroweak factory;…
▽ More
In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration hosted by CERN. This report describes the FCC integrated programme, which consists of two stages: an electron-positron collider (FCC-ee) in the first phase, serving as a high-luminosity Higgs, top, and electroweak factory; followed by a proton-proton collider (FCC-hh) at the energy frontier in the second phase.
FCC-ee is designed to operate at four key centre-of-mass energies: the Z pole, the WW production threshold, the ZH production peak, and the top/anti-top production threshold - delivering the highest possible luminosities to four experiments. Over 15 years of operation, FCC-ee will produce more than 6 trillion Z bosons, 200 million WW pairs, nearly 3 million Higgs bosons, and 2 million top anti-top pairs. Precise energy calibration at the Z pole and WW threshold will be achieved through frequent resonant depolarisation of pilot bunches. The sequence of operation modes remains flexible.
FCC-hh will operate at a centre-of-mass energy of approximately 85 TeV - nearly an order of magnitude higher than the LHC - and is designed to deliver 5 to 10 times the integrated luminosity of the HL-LHC. Its mass reach for direct discovery extends to several tens of TeV. In addition to proton-proton collisions, FCC-hh is capable of supporting ion-ion, ion-proton, and lepton-hadron collision modes.
This second volume of the Feasibility Study Report presents the complete design of the FCC-ee collider, its operation and staging strategy, the full-energy booster and injector complex, required accelerator technologies, safety concepts, and technical infrastructure. It also includes the design of the FCC-hh hadron collider, development of high-field magnets, hadron injector options, and key technical systems for FCC-hh.
△ Less
Submitted 25 April, 2025;
originally announced May 2025.
-
Future Circular Collider Feasibility Study Report: Volume 3, Civil Engineering, Implementation and Sustainability
Authors:
M. Benedikt,
F. Zimmermann,
B. Auchmann,
W. Bartmann,
J. P. Burnet,
C. Carli,
A. Chancé,
P. Craievich,
M. Giovannozzi,
C. Grojean,
J. Gutleber,
K. Hanke,
A. Henriques,
P. Janot,
C. Lourenço,
M. Mangano,
T. Otto,
J. Poole,
S. Rajagopalan,
T. Raubenheimer,
E. Todesco,
L. Ulrici,
T. Watson,
G. Wilkinson,
P. Azzi
, et al. (1439 additional authors not shown)
Abstract:
Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. I…
▽ More
Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. It outlines a technically feasible and economically viable civil engineering configuration that serves as the baseline for detailed subsurface investigations, construction design, cost estimation, and project implementation planning. Additionally, the report highlights ongoing subsurface investigations in key areas to support the development of an improved 3D subsurface model of the region.
The report describes development of the project scenario based on the 'avoid-reduce-compensate' iterative optimisation approach. The reference scenario balances optimal physics performance with territorial compatibility, implementation risks, and costs. Environmental field investigations covering almost 600 hectares of terrain - including numerous urban, economic, social, and technical aspects - confirmed the project's technical feasibility and contributed to the preparation of essential input documents for the formal project authorisation phase. The summary also highlights the initiation of public dialogue as part of the authorisation process. The results of a comprehensive socio-economic impact assessment, which included significant environmental effects, are presented. Even under the most conservative and stringent conditions, a positive benefit-cost ratio for the FCC-ee is obtained. Finally, the report provides a concise summary of the studies conducted to document the current state of the environment.
△ Less
Submitted 25 April, 2025;
originally announced May 2025.
-
Future Circular Collider Feasibility Study Report: Volume 1, Physics, Experiments, Detectors
Authors:
M. Benedikt,
F. Zimmermann,
B. Auchmann,
W. Bartmann,
J. P. Burnet,
C. Carli,
A. Chancé,
P. Craievich,
M. Giovannozzi,
C. Grojean,
J. Gutleber,
K. Hanke,
A. Henriques,
P. Janot,
C. Lourenço,
M. Mangano,
T. Otto,
J. Poole,
S. Rajagopalan,
T. Raubenheimer,
E. Todesco,
L. Ulrici,
T. Watson,
G. Wilkinson,
P. Azzi
, et al. (1439 additional authors not shown)
Abstract:
Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model.…
▽ More
Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model. The report reviews the experimental opportunities offered by the staged implementation of FCC, beginning with an electron-positron collider (FCC-ee), operating at several centre-of-mass energies, followed by a hadron collider (FCC-hh). Benchmark examples are given of the expected physics performance, in terms of precision and sensitivity to new phenomena, of each collider stage. Detector requirements and conceptual designs for FCC-ee experiments are discussed, as are the specific demands that the physics programme imposes on the accelerator in the domains of the calibration of the collision energy, and the interface region between the accelerator and the detector. The report also highlights advances in detector, software and computing technologies, as well as the theoretical tools /reconstruction techniques that will enable the precision measurements and discovery potential of the FCC experimental programme. This volume reflects the outcome of a global collaborative effort involving hundreds of scientists and institutions, aided by a dedicated community-building coordination, and provides a targeted assessment of the scientific opportunities and experimental foundations of the FCC programme.
△ Less
Submitted 25 April, 2025;
originally announced May 2025.
-
Xsuite: an integrated beam physics simulation framework
Authors:
G. Iadarola,
R. De Maria,
S. Lopaciuk,
A. Abramov,
X. Buffat,
D. Demetriadou,
L. Deniau,
P. Hermes,
P. Kicsiny,
P. Kruyt,
A. Latina,
L. Mether,
K. Paraschou,
Sterbini,
F. Van Der Veken,
P. Belanger,
P. Niedermayer,
D. Di Croce,
T. Pieloni,
L. Van Riesen-Haupt
Abstract:
Xsuite is a newly developed modular simulation package combining in a single flexible and modern framework the capabilities of different tools developed at CERN in the past decades, notably Sixtrack, Sixtracklib, COMBI and PyHEADTAIL. The suite consists of a set of Python modules (Xobjects, Xpart, Xtrack, Xcoll, Xfields, Xdeps) that can be flexibly combined together and with other accelerator-spec…
▽ More
Xsuite is a newly developed modular simulation package combining in a single flexible and modern framework the capabilities of different tools developed at CERN in the past decades, notably Sixtrack, Sixtracklib, COMBI and PyHEADTAIL. The suite consists of a set of Python modules (Xobjects, Xpart, Xtrack, Xcoll, Xfields, Xdeps) that can be flexibly combined together and with other accelerator-specific and general-purpose python tools to study complex simulation scenarios. The code allows for symplectic modeling of the particle dynamics, combined with the effect of synchrotron radiation, impedances, feedbacks, space charge, electron cloud, beam-beam, beamstrahlung, and electron lenses. For collimation studies, beam-matter interaction is simulated using the K2 scattering model or interfacing Xsuite with the BDSIM/Geant4 library. Tools are available to compute the accelerator optics functions from the tracking model and to generate particle distributions matched to the optics. Different computing platforms are supported, including conventional CPUs, as well as GPUs from different vendors.
△ Less
Submitted 30 September, 2023;
originally announced October 2023.
-
iDREAM: industrial Detector of REactor Antineutrinos for Monitoring at Kalinin nuclear power plant
Authors:
A. Abramov,
A. Chepurnov,
A. Etenko,
M. Gromov,
A. Konstantinov,
D. Kuznetsov,
E. Litvinovich,
G. Lukyanchenko,
I. Machulin,
A. Murchenko,
A. Nemeryuk,
R. Nugmanov,
B. Obinyakov,
A. Oralbaev,
A. Rastimeshin,
M. Skorokhvatov,
S. Sukhotin
Abstract:
The paper is devoted to the description of the iDREAM detector and its systems. iDREAM is a prototype detector designed to demonstrate the feasibility of antineutrino detectors for remote reactor monitoring and safeguard purposes. Antineutrinos are detected with a 1 ton liquid scintillator via inverse beta decay on protons. In order to suppress cosmic muons, gamma and neutron background, the detec…
▽ More
The paper is devoted to the description of the iDREAM detector and its systems. iDREAM is a prototype detector designed to demonstrate the feasibility of antineutrino detectors for remote reactor monitoring and safeguard purposes. Antineutrinos are detected with a 1 ton liquid scintillator via inverse beta decay on protons. In order to suppress cosmic muons, gamma and neutron background, the detector is housed in a dedicated shielding. The detector is installed at the Kalinin nuclear power plant (Russia), 20 m from the 3 GW$_{th}$ reactor core.
△ Less
Submitted 29 September, 2022; v1 submitted 17 December, 2021;
originally announced December 2021.
-
PYG4OMETRY: a Python library for the creation of Monte Carlo radiation transport physical geometries
Authors:
Stewart Boogert,
Andrey Abramov,
Laurence Nevay,
William Shields,
Stuart Walker
Abstract:
Creating and maintaining computer readable geometries for use in Monte Carlo Radiation Transport (MCRT) simulations is an error-prone and time-consuming task. Simulating a system often requires geometry from different sources and modelling environments, including a range of MCRT codes and computer-aided design (CAD) tools. PYG4OMETRY is a Python library that enables users to rapidly create, manipu…
▽ More
Creating and maintaining computer readable geometries for use in Monte Carlo Radiation Transport (MCRT) simulations is an error-prone and time-consuming task. Simulating a system often requires geometry from different sources and modelling environments, including a range of MCRT codes and computer-aided design (CAD) tools. PYG4OMETRY is a Python library that enables users to rapidly create, manipulate, display, read and write Geometry Description Markup Language (GDML)-based geometry used in simulations. PYG4OMETRY provides importation of CAD files to GDML tessellated solids, conversion of GDML geometry to FLUKA and conversely from FLUKA to GDML. The implementation of PYG4OMETRY is explained in detail along with small examples. The paper concludes with a complete example using most of the PYG4OMETRY features and a discussion of extensions and future work.
△ Less
Submitted 28 March, 2021; v1 submitted 2 October, 2020;
originally announced October 2020.
-
Collimation of partially stripped ions in the CERN Large Hadron Collider
Authors:
Arkadiusz Gorzawski,
Andrey Abramov,
Roderik Bruce,
Nuria Fuster-Martínez,
Mieczyslaw Krasny,
James Molson,
Stefano Redaelli,
Michaela Schaumann
Abstract:
In the scope of the Physics Beyond Colliders studies, the Gamma-Factory initiative proposes the use of partially stripped ions as a driver of a new type of high-intensity photon source in CERN Large Hadron Collider (LHC). In 2018, the LHC accelerated and stored partially stripped $^{208}\text{Pb}^{81+}$ ions for the first time. The collimation system efficiency recorded during this test was found…
▽ More
In the scope of the Physics Beyond Colliders studies, the Gamma-Factory initiative proposes the use of partially stripped ions as a driver of a new type of high-intensity photon source in CERN Large Hadron Collider (LHC). In 2018, the LHC accelerated and stored partially stripped $^{208}\text{Pb}^{81+}$ ions for the first time. The collimation system efficiency recorded during this test was found to be prohibitively low, so that only a very low-intensity beam could be stored without the risk of triggering a beam dump when regular, minor beam losses occur. The worst losses were localised in the dispersion suppressor of the betatron-cleaning insertion. This article presents an analysis to understand in detail the source of these losses. Based on this understanding, possible mitigation measures that could significantly improve the cleaning efficiency and enable regular operation with partially-stripped ions in the future are developed.
△ Less
Submitted 24 July, 2020;
originally announced July 2020.
-
Gamma Factory at CERN -- novel research tools made of light
Authors:
W. Placzek,
A. Abramov,
S. E. Alden,
R. Alemany Fernandez,
P. S. Antsiferov,
A. Apyan,
H. Bartosik,
E. G. Bessonov,
N. Biancacci,
J. Bieron,
A. Bogacz,
A. Bosco,
R. Bruce,
D. Budker,
K. Cassou,
F. Castelli,
I. Chaikovska,
C. Curatolo,
P. Czodrowski,
A. Derevianko,
K. Dupraz,
Y. Dutheil,
K. Dzierzega,
V. Fedosseev,
N. Fuster Martinez
, et al. (37 additional authors not shown)
Abstract:
We discuss the possibility of creating novel research tools by producing and storing highly relativistic beams of highly ionised atoms in the CERN accelerator complex, and by exciting their atomic degrees of freedom with lasers to produce high-energy photon beams. Intensity of such photon beams would be by several orders of magnitude higher than offered by the presently operating light sources, in…
▽ More
We discuss the possibility of creating novel research tools by producing and storing highly relativistic beams of highly ionised atoms in the CERN accelerator complex, and by exciting their atomic degrees of freedom with lasers to produce high-energy photon beams. Intensity of such photon beams would be by several orders of magnitude higher than offered by the presently operating light sources, in the particularly interesting gamma-ray energy domain of 0.1-400 MeV. In this energy range, the high-intensity photon beams can be used to produce secondary beams of polarised electrons, polarised positrons, polarised muons, neutrinos, neutrons and radioactive ions. New research opportunities in a wide domain of fundamental and applied physics can be opened by the Gamma Factory scientific programme based on the above primary and secondary beams.
△ Less
Submitted 14 June, 2019; v1 submitted 21 March, 2019;
originally announced March 2019.
-
BDSIM: An Accelerator Tracking Code with Particle-Matter Interactions
Authors:
Laurence Nevay,
Jochem Snuverink,
Andrey Abramov,
Lawrence Deacon,
Hector Garcia-Morales,
Stephen Gibson,
Regina Kwee-Hinzmann,
Helena Lefebvre,
William Shields,
Stuart Walker,
Stewart Boogert
Abstract:
Beam Delivery Simulation (BDSIM) is a program that simulates the passage of particles in a particle accelerator. It uses a suite of standard high energy physics codes (Geant4, ROOT and CLHEP) to create a computational model of a particle accelerator that combines accurate accelerator tracking routines with all of the physics processes of particles in Geant4. This unique combination permits radiati…
▽ More
Beam Delivery Simulation (BDSIM) is a program that simulates the passage of particles in a particle accelerator. It uses a suite of standard high energy physics codes (Geant4, ROOT and CLHEP) to create a computational model of a particle accelerator that combines accurate accelerator tracking routines with all of the physics processes of particles in Geant4. This unique combination permits radiation and detector background simulations in accelerators where both accurate tracking of all particles is required over long range or over many revolutions of a circular machine, as well as interaction with the material of the accelerator.
△ Less
Submitted 5 February, 2020; v1 submitted 31 August, 2018;
originally announced August 2018.
-
The Large Enriched Germanium Experiment for Neutrinoless Double Beta Decay (LEGEND)
Authors:
LEGEND Collaboration,
N. Abgrall,
A. Abramov,
N. Abrosimov,
I. Abt,
M. Agostini,
M. Agartioglu,
A. Ajjaq,
S. I. Alvis,
F. T. Avignone III,
X. Bai,
M. Balata,
I. Barabanov,
A. S. Barabash,
P. J. Barton,
L. Baudis,
L. Bezrukov,
T. Bode,
A. Bolozdynya,
D. Borowicz,
A. Boston,
H. Boston,
S. T. P. Boyd,
R. Breier,
V. Brudanin
, et al. (208 additional authors not shown)
Abstract:
The observation of neutrinoless double-beta decay (0$νββ$) would show that lepton number is violated, reveal that neutrinos are Majorana particles, and provide information on neutrino mass. A discovery-capable experiment covering the inverted ordering region, with effective Majorana neutrino masses of 15 - 50 meV, will require a tonne-scale experiment with excellent energy resolution and extremely…
▽ More
The observation of neutrinoless double-beta decay (0$νββ$) would show that lepton number is violated, reveal that neutrinos are Majorana particles, and provide information on neutrino mass. A discovery-capable experiment covering the inverted ordering region, with effective Majorana neutrino masses of 15 - 50 meV, will require a tonne-scale experiment with excellent energy resolution and extremely low backgrounds, at the level of $\sim$0.1 count /(FWHM$\cdot$t$\cdot$yr) in the region of the signal. The current generation $^{76}$Ge experiments GERDA and the MAJORANA DEMONSTRATOR utilizing high purity Germanium detectors with an intrinsic energy resolution of 0.12%, have achieved the lowest backgrounds by over an order of magnitude in the 0$νββ$ signal region of all 0$νββ$ experiments. Building on this success, the LEGEND collaboration has been formed to pursue a tonne-scale $^{76}$Ge experiment. The collaboration aims to develop a phased 0$νββ$ experimental program with discovery potential at a half-life approaching or at $10^{28}$ years, using existing resources as appropriate to expedite physics results.
△ Less
Submitted 6 September, 2017;
originally announced September 2017.
