-
Generalised ballooning theory of two dimensional tokamak modes
Authors:
P. A. Abdoul,
D. Dickinson,
C. M. Roach,
H. R. Wilson
Abstract:
In this work, using solutions from a local gyrokinetic flux-tube code combined with higher order ballooning theory, a new analytical approach is developed to reconstruct the global linear mode structure with associated global mode frequency. In addition to the isolated mode (IM), which usually peaks on the outboard mid-plane, the higher order ballooning theory has also captured other types of less…
▽ More
In this work, using solutions from a local gyrokinetic flux-tube code combined with higher order ballooning theory, a new analytical approach is developed to reconstruct the global linear mode structure with associated global mode frequency. In addition to the isolated mode (IM), which usually peaks on the outboard mid-plane, the higher order ballooning theory has also captured other types of less unstable global modes: (a) the weakly asymmetric ballooning theory (WABT) predicts a mixed mode (MM) that undergoes a small poloidal shift away from the outboard mid-plane, (b) a relatively more stable general mode (GM) balloons on the top (or bottom) of the tokamak plasma. In this paper, an analytic approach is developed to combine these disconnected analytical limits into a single generalised ballooning theory (GBT). This is used to investigate how an IM behaves under the effect of sheared toroidal flow. For small values of flow an IM initially converts into a MM where the results of WABT are recaptured, and eventually, as the flow increases, the mode asymptotically becomes a GM on the top (or bottom) of the plasma. This may be an ingredient in models for understanding why in some experimental scenarios, instead of large edge localised modes (ELMs), small ELMs are observed. Finally, our theory can have other important consequences, especially for calculations involving Reynolds stress driven intrinsic rotation through the radial asymmetry in the global mode structures. Understanding the intrinsic rotation is significant because external torque in a plasma the size of ITER is expected to be relatively low.
△ Less
Submitted 12 October, 2017;
originally announced October 2017.
-
Using a local gyrokinetic code to study global ITG modes in tokamaks
Authors:
P. A. Abdoul,
D. Dickinson,
C. M. Roach,
H. R. Wilson
Abstract:
In this paper the global mode structures of linear ion-temperature-gradient (ITG) modes in tokamak plasmas are obtained by combining results from the local gyrokinetic code GS2 with analytical theory. Local gyrokinetic calculations, using GS2, are performed for a range of radial flux surfaces, ${x}$, and ballooning phase angles, ${p}$, to map out the local complex mode frequency,…
▽ More
In this paper the global mode structures of linear ion-temperature-gradient (ITG) modes in tokamak plasmas are obtained by combining results from the local gyrokinetic code GS2 with analytical theory. Local gyrokinetic calculations, using GS2, are performed for a range of radial flux surfaces, ${x}$, and ballooning phase angles, ${p}$, to map out the local complex mode frequency, ${Ω_{0}(x,p)=ω_{0}(x,p)+iγ_{0}(x,p)}$ for a single toroidal mode number, ${n}$. Taylor expanding ${Ω_{0}}$ about ${x=0}$, and employing the Fourier-ballooning representation leads to a second order ODE for the amplitude envelope, ${A\left(p\right)}$ , which describes how the local results are combined to form the global mode. We employ the so-called CYCLONE base case for circular Miller equilibrium model. Assuming radially varying profiles of ${a/L_{T}}$ and ${a/L_{n}}$, peaked at ${x=0}$, and with all other equilibrium profiles held constant, ${Ω_{0}(x,p)}$ is found to have a stationary point. The reconstructed global mode sits at the outboard mid-plane of the tokamak, with global growth rate, ${γ\sim}$Max${\left[γ_{0}\right]}$. Including the radial variation of other equilibrium profiles like safety factor and magnetic shear, leads to a mode that peaks away from the outboard mid-plane, with a reduced global growth rate. Finally, the influence of toroidal flow shear has also been investigated through the introduction of a Doppler shift, ${ω_{0} \rightarrow ω_{0} - nΩ_φ^{\prime} x}$, where ${Ω_φ}$ is the equilibrium toroidal flow, and a prime denotes the radial derivative. The equilibrium profile variations introduce an asymmetry into the global growth rate spectrum with respect to the sign of ${Ω_φ^{\prime}}$, such that the maximum growth rate is achieved with non-zero shearing, consistent with recent global gyrokinetic calculations.
△ Less
Submitted 6 October, 2015; v1 submitted 16 February, 2015;
originally announced February 2015.
-
Using the local gyrokinetic code, GS2, to investigate global ITG modes in tokamaks. (I) s-$α$ model with profile and flow shear effects
Authors:
P. A. Abdoul,
D. Dickinson,
C. M. Roach,
H. R. Wilson
Abstract:
This paper combines results from a local gyrokinetic code with analytical theory to reconstruct the global eigenmode structure of the linearly unstable ion-temperature-gradient (ITG) mode with adiabatic electrons. The simulations presented here employ the s-$α$ tokamak equilibrium model. Local gyrokinetic calculations, using GS2 have been performed over a range of radial surfaces, x, and for ballo…
▽ More
This paper combines results from a local gyrokinetic code with analytical theory to reconstruct the global eigenmode structure of the linearly unstable ion-temperature-gradient (ITG) mode with adiabatic electrons. The simulations presented here employ the s-$α$ tokamak equilibrium model. Local gyrokinetic calculations, using GS2 have been performed over a range of radial surfaces, x, and for ballooning phase angle, p, in the range -$π {\leq} p {\leqπ}$, to map out the complex local mode frequency, ${Ω_0(x, p) = ω_0(x, p) + iγ_0(x, p)}$. Assuming a quadratic radial profile for the drive, namely ${η_i = L_n/L_T}$, (holding constant all other equilibrium profiles such as safety factor, magnetic shear etc.), ${Ω_0(x, p)}$ has a stationary point. The reconstructed global mode then sits on the outboard mid plane of the tokamak plasma, and is known as a conventional or isolated mode, with global growth rate, $γ$ ~ Max[${γ_0(x, p)}$], where ${γ_0(x, p)}$ is the local growth rate. Taking the radial variation in other equilibrium profiles (e.g safety factor q(x)) into account, removes the stationary point in ${Ω_0(x, p)}$ and results in a mode that peaks slightly away from the outboard mid-plane with a reduced global growth rate. Finally, the influence of flow shear has also been investigated through a Doppler shift, ${ω_0 \rightarrow ω_0 + nΩ^{\prime}x}$, where n is the toroidal mode number and ${Ω^{\prime}}$ incorporates the effect of flow shear. The equilibrium profile variation introduces an asymmetry to the growth rate spectrum with respect to the sign of ${Ω^{\prime}}$, consistent with recent global gyrokinetic calculations.
△ Less
Submitted 4 August, 2014;
originally announced August 2014.
