-
Triple Halide Wide Bandgap Perovskites for Efficient Indoor Photovoltaics
Authors:
Shaoyang Wang,
Paul R. Edwards,
Maged Abdelsamie,
Peter Brown,
David Webster,
Arvydas Ruseckas,
Gopika Rajan,
Ana I. S. Neves,
Robert W. Martin,
Carolin M. Sutter-Fella,
Graham A. Turnbull,
Ifor D. W. Samuel,
Lethy Krishnan Jagadamma
Abstract:
Indoor photovoltaics are receiving tremendous attention due to the continuous development of the Internet of Things (IoT). Here we report a triple anion (TA) perovskite CH3NH3PbI2.6(BrCl)0.2 with a tailored bandgap suitable for maximizing indoor light harvesting compared to methyl ammonium lead iodide CH3NH3PbI3. The best-performing TA perovskite indoor-photovoltaic device achieved a steady-state…
▽ More
Indoor photovoltaics are receiving tremendous attention due to the continuous development of the Internet of Things (IoT). Here we report a triple anion (TA) perovskite CH3NH3PbI2.6(BrCl)0.2 with a tailored bandgap suitable for maximizing indoor light harvesting compared to methyl ammonium lead iodide CH3NH3PbI3. The best-performing TA perovskite indoor-photovoltaic device achieved a steady-state power conversion efficiency (PCE) of 25.1% with an output power density of ~ 75 microW/cm2 under 1000 lux indoor illumination
(0.3 mW/cm2 irradiance). This PCE is almost 40% higher than that of equivalent CH3NH3PbI3-based devices (PCE of 17.9%). Longer carrier lifetime, reduced density of trap states and improved crystalline quality were achieved by the triple anion alloying method. The decisive role of chlorine (Cl) in the better performance of TA-based indoor photovoltaic devices was further investigated by successively reducing the Cl content and correlating it with the corresponding photovoltaic device performance. Replacing the commonly used hole transporting layer of Spiro-MeOTAD with undoped P3HT was found to significantly reduce the current-voltage hysteresis under indoor lighting conditions. A graphene-coated textile fiber-based temperature sensor was successfully powered by the triple anion perovskite indoor photovoltaic devices. The results from the present study demonstrate a novel route to maximize the PCE of halide perovskite indoor photovoltaic devices and their potential for application in the IoT industry.
△ Less
Submitted 31 January, 2023;
originally announced January 2023.
-
Evaluation of Electric and Magnetic Fields Distribution and SAR Induced in 3D Models of Water Containers by Radiofrequency Radiation and Their Relationship to the Non-Thermal Effects of Microwaves
Authors:
Maher A. A. Abdelsamie,
Russly b Abdul Rahman,
Shuhaimi Mustafa,
M. M. Isa,
Dzulkifly Hashim
Abstract:
The research works on the biological effects of electromagnetic (EM) radiation have increased globally. Computer simulation models were developed to assess exposure of square, rectangular, pyramidal, and cylindrical water containers to microwave radiation at 300, 900, and 2,400 MHz. The development of the models included determination of EM field distribution and the resulting specific absorption…
▽ More
The research works on the biological effects of electromagnetic (EM) radiation have increased globally. Computer simulation models were developed to assess exposure of square, rectangular, pyramidal, and cylindrical water containers to microwave radiation at 300, 900, and 2,400 MHz. The development of the models included determination of EM field distribution and the resulting specific absorption rate (SAR) in the stored water. These models employed CST STUDIO SUITE 2014 package to solve EM field equations by applying the finite-difference time-domain (FDTD) method. The effect of frequency, packaging shape, and polarization on SAR induced in water was determined. High electric field and point SAR were obtained over the whole azimuth and elevation angles range in the pyramidal container model. The highest values of SAR were induced in water at the sharp edges of the four water container models. The order of the effect on total SAR and maximum point SAR is cylindrical < square < rectangular < pyramidal model at 300, 900, and 2,400 MHz for both vertical and horizontal polarizations. It can be concluded that the variation in the packaging shape of the containers, polarization, irradiation geometry, and frequency. In addition, the sharp edges of the container models significantly affect the calculation and distribution of electric and magnetic fields and SAR values induced in the stored water, which in turn could cause variations in the non-thermal effects of the electromagnetic fields in the stored water.
△ Less
Submitted 3 January, 2017; v1 submitted 5 October, 2014;
originally announced October 2014.
-
Evaluation of electric and magnetic fields distribution and SAR induced in 3D models of water containers by radiofrequency radiation using FDTD and FEM simulation techniques
Authors:
Maher A. A. Abdelsamie,
Russly b Abdul Rahman,
Shuhaimi Mustafa,
Dzulkifly Hashim
Abstract:
In this study, two software packages using different numerical techniques FEKO 6.3 with Finite-Element Method (FEM) and XFDTD 7 with Finite Difference Time Domain Method (FDTD) were used to assess exposure of 3D models of square, rectangular, and pyramidal shaped water containers to electromagnetic waves at 300, 900, and 2400 MHz frequencies. Using the FEM simulation technique, the peak electric f…
▽ More
In this study, two software packages using different numerical techniques FEKO 6.3 with Finite-Element Method (FEM) and XFDTD 7 with Finite Difference Time Domain Method (FDTD) were used to assess exposure of 3D models of square, rectangular, and pyramidal shaped water containers to electromagnetic waves at 300, 900, and 2400 MHz frequencies. Using the FEM simulation technique, the peak electric field of 25, 4.5, and 2 V/m at 300 MHz and 15.75, 1.5, and 1.75 V/m at 900 MHz were observed in pyramidal, rectangular, and square shaped 3D container models, respectively. The FDTD simulation method confirmed a peak electric field of 12.782, 10.907, and 10.625 V/m at 2400 MHz in the pyramidal, square, and rectangular shaped 3D models, respectively. The study demonstrated an exceptionally high level of electric field in the water in the two identical pyramid shaped 3D models analyzed using the two different simulation techniques. Both FEM and FDTD simulation techniques indicated variations in the distribution of electric, magnetic fields, and specific absorption rate of water stored inside the 3D container models. The study successfully demonstrated that shape and dimensions of 3D models significantly influence the electric and magnetic fields inside packaged materials; thus, specific absorption rates in the stored water vary according to the shape and dimensions of the packaging materials.
△ Less
Submitted 10 June, 2014;
originally announced June 2014.
