-
A NICER View of PSR J1231$-$1411: A Complex Case
Authors:
Tuomo Salmi,
Julia S. Deneva,
Paul S. Ray,
Anna L. Watts,
Devarshi Choudhury,
Yves Kini,
Serena Vinciguerra,
H. Thankful Cromartie,
Michael T. Wolff,
Zaven Arzoumanian,
Slavko Bogdanov,
Keith Gendreau,
Sebastien Guillot,
Wynn C. G. Ho,
Sharon M. Morsink,
Ismaël Cognard,
Lucas Guillemot,
Gilles Theureau,
Matthew Kerr
Abstract:
Recent constraints on neutron star mass and radius have advanced our understanding of the equation of state (EOS) of cold dense matter. Some of them have been obtained by modeling the pulses of three millisecond X-ray pulsars observed by the Neutron Star Interior Composition Explorer (NICER). Here, we present a Bayesian parameter inference for a fourth pulsar, PSR J1231$-$1411, using the same tech…
▽ More
Recent constraints on neutron star mass and radius have advanced our understanding of the equation of state (EOS) of cold dense matter. Some of them have been obtained by modeling the pulses of three millisecond X-ray pulsars observed by the Neutron Star Interior Composition Explorer (NICER). Here, we present a Bayesian parameter inference for a fourth pulsar, PSR J1231$-$1411, using the same technique with NICER and XMM-Newton data. When applying a broad mass-inclination prior from radio timing measurements and the emission region geometry model that can best explain the data, we find likely converged results only when using a limited radius prior. If limiting the radius to be consistent with the previous observational constraints and EOS analyses, we infer the radius to be $12.6 \pm 0.3$ km and the mass to be $1.04_{-0.03}^{+0.05}$ $M_\odot$, each reported as the posterior credible interval bounded by the $16\,\%$ and $84\,\%$ quantiles. If using an uninformative prior but limited between $10$ and $14$ km, we find otherwise similar results, but $R_{\mathrm{eq}} = 13.5_{-0.5}^{+0.3}$ km for the radius. In both cases, we find a nonantipodal hot region geometry where one emitting spot is at the equator or slightly above, surrounded by a large colder region, and where a noncircular hot region lies close to southern rotational pole. If using a wider radius prior, we only find solutions that fit the data significantly worse. We discuss the challenges in finding the better fitting solutions, possibly related to the weak interpulse feature in the pulse profile.
△ Less
Submitted 20 November, 2024; v1 submitted 23 September, 2024;
originally announced September 2024.
-
A NICER View of the Nearest and Brightest Millisecond Pulsar: PSR J0437$\unicode{x2013}$4715
Authors:
Devarshi Choudhury,
Tuomo Salmi,
Serena Vinciguerra,
Thomas E. Riley,
Yves Kini,
Anna L. Watts,
Bas Dorsman,
Slavko Bogdanov,
Sebastien Guillot,
Paul S. Ray,
Daniel J. Reardon,
Ronald A. Remillard,
Anna V. Bilous,
Daniela Huppenkothen,
James M. Lattimer,
Nathan Rutherford,
Zaven Arzoumanian,
Keith C. Gendreau,
Sharon M. Morsink,
Wynn C. G. Ho
Abstract:
We report Bayesian inference of the mass, radius and hot X-ray emitting region properties - using data from the Neutron Star Interior Composition ExploreR (NICER) - for the brightest rotation-powered millisecond X-ray pulsar PSR J0437$\unicode{x2013}$4715. Our modeling is conditional on informative tight priors on mass, distance and binary inclination obtained from radio pulsar timing using the Pa…
▽ More
We report Bayesian inference of the mass, radius and hot X-ray emitting region properties - using data from the Neutron Star Interior Composition ExploreR (NICER) - for the brightest rotation-powered millisecond X-ray pulsar PSR J0437$\unicode{x2013}$4715. Our modeling is conditional on informative tight priors on mass, distance and binary inclination obtained from radio pulsar timing using the Parkes Pulsar Timing Array (PPTA) (Reardon et al. 2024), and we use NICER background models to constrain the non-source background, cross-checking with data from XMM-Newton. We assume two distinct hot emitting regions, and various parameterized hot region geometries that are defined in terms of overlapping circles; while simplified, these capture many of the possibilities suggested by detailed modeling of return current heating. For the preferred model identified by our analysis we infer a mass of $M = 1.418 \pm 0.037$ M$_\odot$ (largely informed by the PPTA mass prior) and an equatorial radius of $R = 11.36^{+0.95}_{-0.63}$ km, each reported as the posterior credible interval bounded by the 16% and 84% quantiles. This radius favors softer dense matter equations of state and is highly consistent with constraints derived from gravitational wave measurements of neutron star binary mergers. The hot regions are inferred to be non-antipodal, and hence inconsistent with a pure centered dipole magnetic field.
△ Less
Submitted 9 July, 2024;
originally announced July 2024.
-
A More Precise Measurement of the Radius of PSR J0740+6620 Using Updated NICER Data
Authors:
Alexander J. Dittmann,
M. Coleman Miller,
Frederick K. Lamb,
Isiah Holt,
Cecilia Chirenti,
Michael T. Wolff,
Slavko Bogdanov,
Sebastien Guillot,
Wynn C. G. Ho,
Sharon M. Morsink,
Zaven Arzoumanian,
Keith C. Gendreau
Abstract:
PSR J0740+6620 is the neutron star with the highest precisely determined mass, inferred from radio observations to be $2.08\pm0.07\,\rm M_\odot$. Measurements of its radius therefore hold promise to constrain the properties of the cold, catalyzed, high-density matter in neutron star cores. Previously, Miller et al. (2021) and Riley et al. (2021) reported measurements of the radius of PSR J0740+662…
▽ More
PSR J0740+6620 is the neutron star with the highest precisely determined mass, inferred from radio observations to be $2.08\pm0.07\,\rm M_\odot$. Measurements of its radius therefore hold promise to constrain the properties of the cold, catalyzed, high-density matter in neutron star cores. Previously, Miller et al. (2021) and Riley et al. (2021) reported measurements of the radius of PSR J0740+6620 based on Neutron Star Interior Composition Explorer (NICER) observations accumulated through 17 April 2020, and an exploratory analysis utilizing NICER background estimates and a data set accumulated through 28 December 2021 was presented in Salmi et al. (2022). Here we report an updated radius measurement, derived by fitting models of X-ray emission from the neutron star surface to NICER data accumulated through 21 April 2022, totaling $\sim1.1$ Ms additional exposure compared to the data set analyzed in Miller et al. (2021) and Riley et al. (2021), and to data from X-ray Multi-Mirror (XMM-Newton) observations. We find that the equatorial circumferential radius of PSR J0740+6620 is $12.92_{-1.13}^{+2.09}$ km (68% credibility), a fractional uncertainty $\sim83\%$ the width of that reported in Miller et al. (2021), in line with statistical expectations given the additional data. If we were to require the radius to be less than 16 km, as was done in Salmi et al. (2024), then our 68% credible region would become $R=12.76^{+1.49}_{-1.02}$ km, which is close to the headline result of Salmi et al. (2024). Our updated measurements, along with other laboratory and astrophysical constraints, imply a slightly softer equation of state than that inferred from our previous measurements.
△ Less
Submitted 30 June, 2024; v1 submitted 20 June, 2024;
originally announced June 2024.
-
The Radius of the High-mass Pulsar PSR J0740+6620 with 3.6 yr of NICER Data
Authors:
Tuomo Salmi,
Devarshi Choudhury,
Yves Kini,
Thomas E. Riley,
Serena Vinciguerra,
Anna L. Watts,
Michael T. Wolff,
Zaven Arzoumanian,
Slavko Bogdanov,
Deepto Chakrabarty,
Keith Gendreau,
Sebastien Guillot,
Wynn C. G. Ho,
Daniela Huppenkothen,
Renee M. Ludlam,
Sharon M. Morsink,
Paul S. Ray
Abstract:
We report an updated analysis of the radius, mass, and heated surface regions of the massive pulsar PSR J0740+6620 using Neutron Star Interior Composition Explorer (NICER) data from 2018 September 21 to 2022 April 21, a substantial increase in data set size compared to previous analyses. Using a tight mass prior from radio timing measurements and jointly modeling the new NICER data with XMM-Newton…
▽ More
We report an updated analysis of the radius, mass, and heated surface regions of the massive pulsar PSR J0740+6620 using Neutron Star Interior Composition Explorer (NICER) data from 2018 September 21 to 2022 April 21, a substantial increase in data set size compared to previous analyses. Using a tight mass prior from radio timing measurements and jointly modeling the new NICER data with XMM-Newton data, the inferred equatorial radius and gravitational mass are $12.49_{-0.88}^{+1.28}$ km and $2.073_{-0.069}^{+0.069}$ $M_\odot$ respectively, each reported as the posterior credible interval bounded by the $16\,\%$ and $84\,\%$ quantiles, with an estimated systematic error $\lesssim 0.1$ km. This result was obtained using the best computationally feasible sampler settings providing a strong radius lower limit but a slightly more uncertain radius upper limit. The inferred radius interval is also close to the $R=12.76_{-1.02}^{+1.49}$ km obtained by Dittmann et al., when they require the radius to be less than $16$ km as we do. The results continue to disfavor very soft equations of state for dense matter, with $R<11.15$ km for this high-mass pulsar excluded at the $95\,\%$ probability. The results do not depend significantly on the assumed cross-calibration uncertainty between NICER and XMM-Newton. Using simulated data that resemble the actual observations, we also show that our pipeline is capable of recovering parameters for the inferred models reported in this paper.
△ Less
Submitted 25 October, 2024; v1 submitted 20 June, 2024;
originally announced June 2024.
-
Secular Outflows from 3D-MHD Hypermassive Neutron Star Accretion Disk Systems
Authors:
Steven Fahlman,
Rodrigo Fernández,
Sharon Morsink
Abstract:
Magnetized hypermassive neutron stars (HMNSs) have been proposed as a way for neutron star (NS) mergers to produce high electron fraction, high velocity ejecta, as required by kilonova models to explain the observed light curve of GW170817. The HMNS drives outflows through neutrino energy deposition and mechanical oscillations, and raises the electron fraction of outflows through neutrino interact…
▽ More
Magnetized hypermassive neutron stars (HMNSs) have been proposed as a way for neutron star (NS) mergers to produce high electron fraction, high velocity ejecta, as required by kilonova models to explain the observed light curve of GW170817. The HMNS drives outflows through neutrino energy deposition and mechanical oscillations, and raises the electron fraction of outflows through neutrino interactions before collapsing to a black hole (BH). Here we perform 3D numerical simulations of HMNS-torus systems in ideal magnetohydrodynamics, using a leakage/absorption scheme for neutrino transport, the nuclear APR equation of state, and Newtonian self-gravity, with a pseudo-Newtonian potential added after BH formation. Due to the uncertainty in the HMNS collapse time, we choose two different parameterized times to induce collapse. We also explore two initial magnetic field geometries in the torus, and evolve the systems until the outflows diminish significantly ($\sim 1 - 2$ $\mathrm{s}$). We find bluer, faster outflows as compared to equivalent BH-torus systems, producing $M\sim 10^{-3} M_\odot$ of ejecta with $Y_e \geq 0.25$ and $v \geq 0.25c$ by the simulation end. Approximately half the outflows are launched in disk winds at times $t\lesssim 500$ $\mathrm{ms}$, with a broad distribution of electron fractions and velocities, depending on the initial condition. The remaining outflows are thermally-driven, characterized by lower velocities and electron fractions. Nucleosynthesis with tracer particles shows patterns resembling solar abundances in all models. Although outflows from our simulations do not match those inferred from two-component modelling of the GW170817 kilonova, self-consistent multidimensional detailed kilonova models are required to determine if our outflows can power the blue kilonova.
△ Less
Submitted 30 August, 2023;
originally announced August 2023.
-
An updated mass-radius analysis of the 2017-2018 NICER data set of PSR J0030+0451
Authors:
Serena Vinciguerra,
Tuomo Salmi,
Anna L. Watts,
Devarshi Choudhury,
Thomas E. Riley,
Paul S. Ray,
Slavko Bogdanov,
Yves Kini,
Sebastien Guillot,
Deepto Chakrabarty,
Wynn C. G. Ho,
Daniela Huppenkothen,
Sharon M. Morsink,
Zorawar Wadiasingh
Abstract:
In 2019 the NICER collaboration published the first mass and radius inferred for PSR J0030+0451, thanks to NICER observations, and consequent constraints on the equation of state characterising dense matter. Two independent analyses found a mass of $\sim 1.3-1.4\,\mathrm{M_\odot}$ and a radius of $\sim 13\,$km. They also both found that the hot spots were all located on the same hemisphere, opposi…
▽ More
In 2019 the NICER collaboration published the first mass and radius inferred for PSR J0030+0451, thanks to NICER observations, and consequent constraints on the equation of state characterising dense matter. Two independent analyses found a mass of $\sim 1.3-1.4\,\mathrm{M_\odot}$ and a radius of $\sim 13\,$km. They also both found that the hot spots were all located on the same hemisphere, opposite to the observer, and that at least one of them had a significantly elongated shape. Here we reanalyse, in greater detail, the same NICER data set, incorporating the effects of an updated NICER response matrix and using an upgraded analysis framework. We expand the adopted models and jointly analyse also XMM-Newton data, which enables us to better constrain the fraction of observed counts coming from PSR J0030+0451. Adopting the same models used in previous publications, we find consistent results, although with more stringent inference requirements. We also find a multi-modal structure in the posterior surface. This becomes crucial when XMM-Newton data is accounted for. Including the corresponding constraints disfavors the main solutions found previously, in favor of the new and more complex models. These have inferred masses and radii of $\sim [1.4 \mathrm{M_\odot}, 11.5$ km] and $\sim [1.7 \mathrm{M_\odot}, 14.5$ km], depending on the assumed model. They display configurations that do not require the two hot spots generating the observed X-rays to be on the same hemisphere, nor to show very elongated features, and point instead to the presence of temperature gradients and the need to account for them.
△ Less
Submitted 18 August, 2023;
originally announced August 2023.
-
Atmospheric Effects on Neutron Star Parameter Constraints with NICER
Authors:
Tuomo Salmi,
Serena Vinciguerra,
Devarshi Choudhury,
Anna L. Watts,
Wynn C. G. Ho,
Sebastien Guillot,
Yves Kini,
Bas Dorsman,
Sharon M. Morsink,
Slavko Bogdanov
Abstract:
We present an analysis of the effects of uncertainties in the atmosphere models on the radius, mass, and other neutron star parameter constraints for the NICER observations of rotation-powered millisecond pulsars. To date, NICER has applied the X-ray pulse profile modeling technique to two millisecond-period pulsars: PSR J0030+0451 and the high-mass pulsar PSR J0740+6620. These studies have common…
▽ More
We present an analysis of the effects of uncertainties in the atmosphere models on the radius, mass, and other neutron star parameter constraints for the NICER observations of rotation-powered millisecond pulsars. To date, NICER has applied the X-ray pulse profile modeling technique to two millisecond-period pulsars: PSR J0030+0451 and the high-mass pulsar PSR J0740+6620. These studies have commonly assumed a deep-heated, fully ionized hydrogen atmosphere model, although they have explored the effects of partial-ionization and helium composition in some cases. Here, we extend that exploration and also include new models with partially ionized carbon composition, externally heated hydrogen, and an empirical atmospheric beaming parameterization to explore deviations in the expected anisotropy of the emitted radiation. None of the studied atmosphere cases have any significant influence on the inferred radius of PSR J0740+6620, possibly due to its X-ray faintness, tighter external constraints, and/or viewing geometry. In the case of PSR J0030+0451, both the composition and ionization state could significantly alter the inferred radius. However, based on the evidence (prior predictive probability of the data), partially ionized hydrogen and carbon atmospheres are disfavored. The difference in the evidence for ionized hydrogen and helium atmospheres is too small to be decisive for most cases, but the inferred radius for helium models trends to larger sizes around or above 14-15 km. External heating or deviations in the beaming that are less than $5\,\%$ at emission angles smaller than 60 degrees, on the other hand, have no significant effect on the inferred radius.
△ Less
Submitted 23 October, 2023; v1 submitted 18 August, 2023;
originally announced August 2023.
-
The Radius of PSR J0740+6620 from NICER with NICER Background Estimates
Authors:
Tuomo Salmi,
Serena Vinciguerra,
Devarshi Choudhury,
Thomas E. Riley,
Anna L. Watts,
Ronald A. Remillard,
Paul S. Ray,
Slavko Bogdanov,
Sebastien Guillot,
Zaven Arzoumanian,
Cecilia Chirenti,
Alexander J. Dittmann,
Keith C. Gendreau,
Wynn C. G. Ho,
M. Coleman Miller,
Sharon M. Morsink,
Zorawar Wadiasingh,
Michael T. Wolff
Abstract:
We report a revised analysis for the radius, mass, and hot surface regions of the massive millisecond pulsar PSR J0740+6620, studied previously with joint fits to NICER and XMM-Newton data by Riley et al. (2021) and Miller et al. (2021). We perform a similar Bayesian estimation for the pulse-profile model parameters, except that instead of fitting simultaneously the XMM-Newton data, we use the bes…
▽ More
We report a revised analysis for the radius, mass, and hot surface regions of the massive millisecond pulsar PSR J0740+6620, studied previously with joint fits to NICER and XMM-Newton data by Riley et al. (2021) and Miller et al. (2021). We perform a similar Bayesian estimation for the pulse-profile model parameters, except that instead of fitting simultaneously the XMM-Newton data, we use the best available NICER background estimates to constrain the number of photons detected from the source. This approach eliminates any potential issues in the cross-calibration between these two instruments, providing thus an independent check of the robustness of the analysis. The obtained neutron star parameter constraints are compatible with the already published results, with a slight dependence on how conservative the imposed background limits are. A tighter lower limit causes the inferred radius to increase, and a tighter upper limit causes it to decrease. We also extend the study of the inferred emission geometry to examine the degree of deviation from antipodality of the hot regions. We show that there is a significant offset to an antipodal spot configuration, mainly due to the non-half-cycle azimuthal separation of the two emitting spots. The offset angle from the antipode is inferred to be above 25 degrees with 84% probability. This seems to exclude a centered-dipolar magnetic field in PSR J0740+6620.
△ Less
Submitted 13 January, 2023; v1 submitted 26 September, 2022;
originally announced September 2022.
-
A NICER View of the Massive Pulsar PSR J0740+6620 Informed by Radio Timing and XMM-Newton Spectroscopy
Authors:
Thomas E. Riley,
Anna L. Watts,
Paul S. Ray,
Slavko Bogdanov,
Sebastien Guillot,
Sharon M. Morsink,
Anna V. Bilous,
Zaven Arzoumanian,
Devarshi Choudhury,
Julia S. Deneva,
Keith C. Gendreau,
Alice K. Harding,
Wynn C. G. Ho,
James M. Lattimer,
Michael Loewenstein,
Renee M. Ludlam,
Craig B. Markwardt,
Takashi Okajima,
Chanda Prescod-Weinstein,
Ronald A. Remillard,
Michael T. Wolff,
Emmanuel Fonseca,
H. Thankful Cromartie,
Matthew Kerr,
Timothy T. Pennucci
, et al. (5 additional authors not shown)
Abstract:
We report on Bayesian estimation of the radius, mass, and hot surface regions of the massive millisecond pulsar PSR J0740$+$6620, conditional on pulse-profile modeling of Neutron Star Interior Composition Explorer X-ray Timing Instrument (NICER XTI) event data. We condition on informative pulsar mass, distance, and orbital inclination priors derived from the joint NANOGrav and CHIME/Pulsar wideban…
▽ More
We report on Bayesian estimation of the radius, mass, and hot surface regions of the massive millisecond pulsar PSR J0740$+$6620, conditional on pulse-profile modeling of Neutron Star Interior Composition Explorer X-ray Timing Instrument (NICER XTI) event data. We condition on informative pulsar mass, distance, and orbital inclination priors derived from the joint NANOGrav and CHIME/Pulsar wideband radio timing measurements of arXiv:2104.00880. We use XMM European Photon Imaging Camera spectroscopic event data to inform our X-ray likelihood function. The prior support of the pulsar radius is truncated at 16 km to ensure coverage of current dense matter models. We assume conservative priors on instrument calibration uncertainty. We constrain the equatorial radius and mass of PSR J0740$+$6620 to be $12.39_{-0.98}^{+1.30}$ km and $2.072_{-0.066}^{+0.067}$ M$_{\odot}$ respectively, each reported as the posterior credible interval bounded by the 16% and 84% quantiles, conditional on surface hot regions that are non-overlapping spherical caps of fully-ionized hydrogen atmosphere with uniform effective temperature; a posteriori, the temperature is $\log_{10}(T$ [K]$)=5.99_{-0.06}^{+0.05}$ for each hot region. All software for the X-ray modeling framework is open-source and all data, model, and sample information is publicly available, including analysis notebooks and model modules in the Python language. Our marginal likelihood function of mass and equatorial radius is proportional to the marginal joint posterior density of those parameters (within the prior support) and can thus be computed from the posterior samples.
△ Less
Submitted 22 September, 2021; v1 submitted 14 May, 2021;
originally announced May 2021.
-
The Radius of PSR J0740+6620 from NICER and XMM-Newton Data
Authors:
M. C. Miller,
F. K. Lamb,
A. J. Dittmann,
S. Bogdanov,
Z. Arzoumanian,
K. C. Gendreau,
S. Guillot,
W. C. G. Ho,
J. M. Lattimer,
M. Loewenstein,
S. M. Morsink,
P. S. Ray,
M. T. Wolff,
C. L. Baker,
T. Cazeau,
S. Manthripragada,
C. B. Markwardt,
T. Okajima,
S. Pollard,
I. Cognard,
H. T. Cromartie,
E. Fonseca,
L. Guillemot,
M. Kerr,
A. Parthasarathy
, et al. (3 additional authors not shown)
Abstract:
PSR J0740$+$6620 has a gravitational mass of $2.08\pm 0.07~M_\odot$, which is the highest reliably determined mass of any neutron star. As a result, a measurement of its radius will provide unique insight into the properties of neutron star core matter at high densities. Here we report a radius measurement based on fits of rotating hot spot patterns to Neutron Star Interior Composition Explorer (N…
▽ More
PSR J0740$+$6620 has a gravitational mass of $2.08\pm 0.07~M_\odot$, which is the highest reliably determined mass of any neutron star. As a result, a measurement of its radius will provide unique insight into the properties of neutron star core matter at high densities. Here we report a radius measurement based on fits of rotating hot spot patterns to Neutron Star Interior Composition Explorer (NICER) and X-ray Multi-Mirror (XMM-Newton) X-ray observations. We find that the equatorial circumferential radius of PSR J0740$+$6620 is $13.7^{+2.6}_{-1.5}$ km (68%). We apply our measurement, combined with the previous NICER mass and radius measurement of PSR J0030$+$0451, the masses of two other $\sim 2~M_\odot$ pulsars, and the tidal deformability constraints from two gravitational wave events, to three different frameworks for equation of state modeling, and find consistent results at $\sim 1.5-3$ times nuclear saturation density. For a given framework, when all measurements are included the radius of a $1.4~M_\odot$ neutron star is known to $\pm 4$% (68% credibility) and the radius of a $2.08~M_\odot$ neutron star is known to $\pm 5$%. The full radius range that spans the $\pm 1σ$ credible intervals of all the radius estimates in the three frameworks is $12.45\pm 0.65$ km for a $1.4~M_\odot$ neutron star and $12.35\pm 0.75$ km for a $2.08~M_\odot$ neutron star.
△ Less
Submitted 14 May, 2021;
originally announced May 2021.
-
PSR J0030+0451 Mass and Radius from NICER Data and Implications for the Properties of Neutron Star Matter
Authors:
M. C. Miller,
F. K. Lamb,
A. J. Dittmann,
S. Bogdanov,
Z. Arzoumanian,
K. C. Gendreau,
S. Guillot,
A. K. Harding,
W. C. G. Ho,
J. M. Lattimer,
R. M. Ludlam,
S. Mahmoodifar,
S. M. Morsink,
P. S. Ray,
T. E. Strohmayer,
K. S. Wood,
T. Enoto,
R. Foster,
T. Okajima,
G. Prigozhin,
Y. Soong
Abstract:
Neutron stars are not only of astrophysical interest, but are also of great interest to nuclear physicists, because their attributes can be used to determine the properties of the dense matter in their cores. One of the most informative approaches for determining the equation of state of this dense matter is to measure both a star's equatorial circumferential radius $R_e$ and its gravitational mas…
▽ More
Neutron stars are not only of astrophysical interest, but are also of great interest to nuclear physicists, because their attributes can be used to determine the properties of the dense matter in their cores. One of the most informative approaches for determining the equation of state of this dense matter is to measure both a star's equatorial circumferential radius $R_e$ and its gravitational mass $M$. Here we report estimates of the mass and radius of the isolated 205.53 Hz millisecond pulsar PSR J0030+0451 obtained using a Bayesian inference approach to analyze its energy-dependent thermal X-ray waveform, which was observed using the Neutron Star Interior Composition Explorer (NICER). This approach is thought to be less subject to systematic errors than other approaches for estimating neutron star radii. We explored a variety of emission patterns on the stellar surface. Our best-fit model has three oval, uniform-temperature emitting spots and provides an excellent description of the pulse waveform observed using NICER. The radius and mass estimates given by this model are $R_e = 13.02^{+1.24}_{-1.06}$ km and $M = 1.44^{+0.15}_{-0.14}\ M_\odot$ (68%). The independent analysis reported in the companion paper by Riley et al. (2019) explores different emitting spot models, but finds spot shapes and locations and estimates of $R_e$ and $M$ that are consistent with those found in this work. We show that our measurements of $R_e$ and $M$ for PSR J0030$+$0451 improve the astrophysical constraints on the equation of state of cold, catalyzed matter above nuclear saturation density.
△ Less
Submitted 11 December, 2019;
originally announced December 2019.
-
A NICER view of PSR J0030+0451: Implications for the dense matter equation of state
Authors:
G. Raaijmakers,
T. E. Riley,
A. L. Watts,
S. K. Greif,
S. M. Morsink,
K. Hebeler,
A. Schwenk,
T. Hinderer,
S. Nissanke,
S. Guillot,
Z. Arzoumanian,
S. Bogdanov,
D. Chakrabarty K. C. Gendreau,
W. C. G. Ho,
J. M. Lattimer,
R. M. Ludlam,
M. T. Wolff
Abstract:
Both the mass and radius of the millisecond pulsar PSR J0030+0451 have been inferred via pulse-profile modeling of X-ray data obtained by NASA's NICER mission. In this Letter we study the implications of the mass-radius inference reported for this source by Riley et al. (2019) for the dense matter equation of state (EOS), in the context of prior information from nuclear physics at low densities. U…
▽ More
Both the mass and radius of the millisecond pulsar PSR J0030+0451 have been inferred via pulse-profile modeling of X-ray data obtained by NASA's NICER mission. In this Letter we study the implications of the mass-radius inference reported for this source by Riley et al. (2019) for the dense matter equation of state (EOS), in the context of prior information from nuclear physics at low densities. Using a Bayesian framework we infer central densities and EOS properties for two choices of high-density extensions: a piecewise-polytropic model and a model based on assumptions of the speed of sound in dense matter. Around nuclear saturation density these extensions are matched to an EOS uncertainty band obtained from calculations based on chiral effective field theory interactions, which provide a realistic description of atomic nuclei as well as empirical nuclear matter properties within uncertainties. We further constrain EOS expectations with input from the current highest measured pulsar mass; together, these constraints offer a narrow Bayesian prior informed by theory as well as laboratory and astrophysical measurements. The NICER mass-radius likelihood function derived by Riley et al. (2019) using pulse-profile modeling is consistent with the highest-density region of this prior. The present relatively large uncertainties on mass and radius for PSR J0030+0451 offer, however, only a weak posterior information gain over the prior. We explore the sensitivity to the inferred geometry of the heated regions that give rise to the pulsed emission, and find a small increase in posterior gain for an alternative (but less preferred) model. Lastly, we investigate the hypothetical scenario of increasing the NICER exposure time for PSR J0030+0451.
△ Less
Submitted 11 December, 2019;
originally announced December 2019.
-
A NICER View of PSR J0030+0451: Millisecond Pulsar Parameter Estimation
Authors:
Thomas E. Riley,
Anna L. Watts,
Slavko Bogdanov,
Paul S. Ray,
Renee M. Ludlam,
Sebastien Guillot,
Zaven Arzoumanian,
Charles L. Baker,
Anna V. Bilous,
Deepto Chakrabarty,
Keith C. Gendreau,
Alice K. Harding,
Wynn C. G. Ho,
James M. Lattimer,
Sharon M. Morsink,
Tod E. Strohmayer
Abstract:
We report on Bayesian parameter estimation of the mass and equatorial radius of the millisecond pulsar PSR J0030$+$0451, conditional on pulse-profile modeling of Neutron Star Interior Composition Explorer (NICER) X-ray spectral-timing event data. We perform relativistic ray-tracing of thermal emission from hot regions of the pulsar's surface. We assume two distinct hot regions based on two clear p…
▽ More
We report on Bayesian parameter estimation of the mass and equatorial radius of the millisecond pulsar PSR J0030$+$0451, conditional on pulse-profile modeling of Neutron Star Interior Composition Explorer (NICER) X-ray spectral-timing event data. We perform relativistic ray-tracing of thermal emission from hot regions of the pulsar's surface. We assume two distinct hot regions based on two clear pulsed components in the phase-folded pulse-profile data; we explore a number of forms (morphologies and topologies) for each hot region, inferring their parameters in addition to the stellar mass and radius. For the family of models considered, the evidence (prior predictive probability of the data) strongly favors a model that permits both hot regions to be located in the same rotational hemisphere. Models wherein both hot regions are assumed to be simply-connected circular single-temperature spots, in particular those where the spots are assumed to be reflection-symmetric with respect to the stellar origin, are strongly disfavored. For the inferred configuration, one hot region subtends an angular extent of only a few degrees (in spherical coordinates with origin at the stellar center) and we are insensitive to other structural details; the second hot region is far more azimuthally extended in the form of a narrow arc, thus requiring a larger number of parameters to describe. The inferred mass $M$ and equatorial radius $R_\mathrm{eq}$ are, respectively, $1.34_{-0.16}^{+0.15}$ M$_{\odot}$ and $12.71_{-1.19}^{+1.14}$ km, whilst the compactness $GM/R_\mathrm{eq}c^2 = 0.156_{-0.010}^{+0.008}$ is more tightly constrained; the credible interval bounds reported here are approximately the $16\%$ and $84\%$ quantiles in marginal posterior mass.
△ Less
Submitted 11 December, 2019;
originally announced December 2019.
-
Measuring the neutron star equation of state using X-ray timing
Authors:
Anna L. Watts,
Nils Andersson,
Deepto Chakrabarty,
Marco Feroci,
Kai Hebeler,
Gianluca Israel,
Frederick K. Lamb,
M. Coleman Miller,
Sharon Morsink,
Feryal Özel,
Alessandro Patruno,
Juri Poutanen,
Dimitrios Psaltis,
Achim Schwenk,
Andrew W. Steiner,
Luigi Stella,
Laura Tolos,
Michiel van der Klis
Abstract:
One of the primary science goals of the next generation of hard X-ray timing instruments is to determine the equation of state of the matter at supranuclear densities inside neutron stars, by measuring the radius of neutron stars with different masses to accuracies of a few percent. Three main techniques can be used to achieve this goal. The first involves waveform modelling. The flux we observe f…
▽ More
One of the primary science goals of the next generation of hard X-ray timing instruments is to determine the equation of state of the matter at supranuclear densities inside neutron stars, by measuring the radius of neutron stars with different masses to accuracies of a few percent. Three main techniques can be used to achieve this goal. The first involves waveform modelling. The flux we observe from a hotspot on the neutron star surface offset from the rotational pole will be modulated by the star's rotation, giving rise to a pulsation. Information about mass and radius is encoded into the pulse profile via relativistic effects, and tight constraints on mass and radius can be obtained. The second technique involves characterising the spin distribution of accreting neutron stars. The most rapidly rotating stars provide a very clean constraint, since the mass-shedding limit is a function of mass and radius. However the overall spin distribution also provides a guide to the torque mechanisms in operation and the moment of inertia, both of which can depend sensitively on dense matter physics. The third technique is to search for quasi-periodic oscillations in X-ray flux associated with global seismic vibrations of magnetars (the most highly magnetized neutron stars), triggered by magnetic explosions. The vibrational frequencies depend on stellar parameters including the dense matter equation of state. We illustrate how these complementary X-ray timing techniques can be used to constrain the dense matter equation of state, and discuss the results that might be expected from a 10m$^2$ instrument. We also discuss how the results from such a facility would compare to other astronomical investigations of neutron star properties. [Modified for arXiv]
△ Less
Submitted 2 February, 2016;
originally announced February 2016.
