-
Towards AMS measurements of $^{91}$Nb, $^{94}$Nb and $^{93}$Mo produced in fusion environment
Authors:
Carlos Vivo-Vilches,
Esad Hrnjic,
Martin Martschini,
Kyra Altindag,
Lee William Packer,
Robin Golser,
Karin Hain
Abstract:
Long-lived radionuclides, such as $^{91}$Nb, $^{94}$Nb and $^{93}$Mo, are expected to be produced in nuclear fusion reactors by reactions of high-energy neutrons with the structural material. Accurate predictions of waste categorization require experimental validation of simulation codes like FISPACT-II. This work explores the use of Ion-Laser InterAction Mass Spectrometry (ILIAMS) at the Vienna E…
▽ More
Long-lived radionuclides, such as $^{91}$Nb, $^{94}$Nb and $^{93}$Mo, are expected to be produced in nuclear fusion reactors by reactions of high-energy neutrons with the structural material. Accurate predictions of waste categorization require experimental validation of simulation codes like FISPACT-II. This work explores the use of Ion-Laser InterAction Mass Spectrometry (ILIAMS) at the Vienna Environmental Research Accelerator (VERA) to measure these three radionuclides by accelerator mass spectrometry (AMS). The ILIAMS setup employs laser photodetachment to suppress their respective stable isobars: $^{91}$Zr, $^{94}$Zr and $^{94}$Mo, and $^{93}$Nb.
For $^{91,94}$Nb measurements, the NbO$_3^-$ anion is selected, with interferences from $^{91,94}$ZrO$_{3}^-$ already suppressed just by collisions with the He buffer gas in the ion cooler. The suppression can be further enhanced by overlapping a 355$\,$nm laser with the ion beam. In that way, we reach $^{91}$Zr/$^{93}$Nb and $^{94}$Zr/$^{93}$Nb levels of $1.2\,\times\,10^{-14}$ and $1.8\,\times\,10^{-14}$, respectively, in commercial Nb$_2$O$_5$ targets. The MoO$_3^-$ anion was suppressed by a factor of 4360, leading to a $^{94}$Mo/$^{93}$Nb interference of $1.28\,\times\,10^{-10}$ in the same targets.
For $^{93}$Mo measurements, the MoO$_2^-$ anion is selected, with interference from $^{93}$NbO$_2^-$ suppressed by 637$\,$nm photons by a factor of $5.5\,\times\,10^6$. This results in a $^{93}$Nb/$^\text{nat}$Mo level of $1.3\,\times\,10^{-13}$ in targets prepared from commercial MoO$_3$.
These suppressions are not achieved using separation techniques based on the difference in energy loss, even in AMS facilities with terminal voltages above 8.5$\,$MV and foil stripping.
△ Less
Submitted 3 March, 2025;
originally announced March 2025.
-
FENDL: A library for fusion research and applications
Authors:
G. Schnabel,
D. L. Aldama,
T. Bohm,
U. Fischer,
S. Kunieda,
A. Trkov,
C. Konno,
R. Capote,
A. J. Koning,
S. Breidokaite,
T. Eade,
M. Fabbri,
D. Flammini,
L. Isolan,
I. Kodeli,
M. Košťál,
S. Kwon,
D. Laghi,
D. Leichtle,
S. Nakayama,
M. Ohta,
L. W. Packer,
Y. Qiu,
S. Sato,
M. Sawan
, et al. (6 additional authors not shown)
Abstract:
The Fusion Evaluated Nuclear Data Library (FENDL) is a comprehensive and validated collection of nuclear cross section data coordinated by the International Atomic Energy Agency (IAEA) Nuclear Data Section (NDS). FENDL assembles the best nuclear data for fusion applications selected from available nuclear data libraries and has been under development for decades. FENDL contains sub-libraries for i…
▽ More
The Fusion Evaluated Nuclear Data Library (FENDL) is a comprehensive and validated collection of nuclear cross section data coordinated by the International Atomic Energy Agency (IAEA) Nuclear Data Section (NDS). FENDL assembles the best nuclear data for fusion applications selected from available nuclear data libraries and has been under development for decades. FENDL contains sub-libraries for incident neutron, proton, and deuteron cross sections including general purpose and activation files used for particle transport and nuclide inventory calculations.
We describe the history, selection of evaluations for the various sub-libraries (neutron, proton, deuteron) with the focus on transport and reactor dosimetry applications, the processing of the nuclear data for application codes, and the development of the TENDL-2017 library which is the currently recommended activation library for FENDL. We briefly describe the IAEA IRDFF library as the recommended library for dosimetry fusion applications. We also present work on validation of the neutron sub-library using a variety of fusion relevant computational and experimental benchmarks. A variety of cross section libraries are used for the validation work including FENDL-2.1, FENDL-3.1d, FENDL-3.2, ENDF/B-VIII.0, and JEFF-3.2 with the emphasis on the FENDL libraries. The results of the experimental validation showed that the performance of FENDL-3.2b is at least as good and in most cases better than FENDL-2.1.
Future work will consider improved evaluations developed by the International Nuclear Data Evaluation Network (INDEN). Additional work will be needed to investigate differences in gas production in structural materials. Covariance matrices need to be updated to support the development of fusion technology. Additional validation work for high-energy neutrons, protons and deuterons, and the activation library will be needed.
△ Less
Submitted 17 November, 2023; v1 submitted 16 November, 2023;
originally announced November 2023.
-
Neutron-induced dpa, transmutations, gas production, and helium embrittlement of fusion materials
Authors:
M. R. Gilbert,
S. L. Dudarev,
D. Nguyen-Manh,
S. Zheng,
L. W. Packer,
J. -Ch. Sublet
Abstract:
In a fusion reactor materials will be subjected to significant fluxes of high-energy neutrons. As well as causing radiation damage, the neutrons also initiate nuclear reactions leading to changes in the chemical composition of materials (transmutation). Many of these reactions produce gases, particularly helium, which cause additional swelling and embrittlement of materials. This paper investigate…
▽ More
In a fusion reactor materials will be subjected to significant fluxes of high-energy neutrons. As well as causing radiation damage, the neutrons also initiate nuclear reactions leading to changes in the chemical composition of materials (transmutation). Many of these reactions produce gases, particularly helium, which cause additional swelling and embrittlement of materials. This paper investigates, using a combination of neutron-transport and inventory calculations, the variation in displacements per atom (dpa) and helium production levels as a function of position within the high flux regions of a recent conceptual model for the "next-step" fusion device DEMO. Subsequently, the gas production rates are used to provide revised estimates, based on new density-functional-theory results, for the critical component lifetimes associated with the helium-induced grain-boundary embrittlement of materials. The revised estimates give more optimistic projections for the lifetimes of materials in a fusion power plant compared to a previous study, while at the same time indicating that helium embrittlement remains one of the most significant factors controlling the structural integrity of fusion power plant components.
△ Less
Submitted 20 November, 2013;
originally announced November 2013.
