-
Absolute light yield of the EJ-204 plastic scintillator
Authors:
J. A. Brown,
T. A. Laplace,
B. L. Goldblum,
J. J. Manfredi,
T. S. Johnson,
F. Moretti,
A. Venkatraman
Abstract:
The absolute light yield of a scintillator, defined as the number of scintillation photons produced per unit energy deposited, is a useful quantity for scintillator development, research, and applications. Yet, literature data on the absolute light yield of organic scintillators are limited. The goal of this work is to assess the suitability of the EJ-204 plastic scintillator from Eljen Technology…
▽ More
The absolute light yield of a scintillator, defined as the number of scintillation photons produced per unit energy deposited, is a useful quantity for scintillator development, research, and applications. Yet, literature data on the absolute light yield of organic scintillators are limited. The goal of this work is to assess the suitability of the EJ-204 plastic scintillator from Eljen Technology to serve as a reference standard for measurements of the absolute light yield of organic scintillators. Four EJ-204 samples were examined: two manufactured approximately four months prior and stored in high-purity nitrogen, and two aged approximately eleven years and stored in ambient air. The scintillator response was measured using a large-area avalanche photodiode calibrated using low energy $γ$-ray and X-ray sources. The product of the quantum efficiency of the photodetector and light collection efficiency of the housing was characterized using an experimentally-benchmarked optical photon simulation. The average absolute light yield of the fresh samples, 9100 $\pm$ 400 photons per MeV, is lower than the manufacturer-reported value of 10400 photons per MeV. Moreover, the aged samples demonstrated significantly lower light yields, deviating from the manufacturer specification by as much as 26\%. These results are consistent with recent work showcasing environmental aging in plastic scintillators and suggest that experimenters should use caution when deploying plastic scintillators in photon counting applications.
△ Less
Submitted 28 May, 2023;
originally announced May 2023.
-
Neutron Spectroscopy for Pulsed Beams with Frame Overlap using a Double Time-of-Flight Technique
Authors:
K. P. Harrig,
B. L. Goldblum,
J. A. Brown,
D. L. Bleuel,
L. A. Bernstein,
J. Bevins,
M. Harasty,
T. A. Laplace,
E. F. Matthews
Abstract:
A new double time-of-flight (dTOF) neutron spectroscopy technique has been developed for pulsed broad spectrum sources with a duty cycle that results in frame overlap, where fast neutrons from a given pulse overtake slower neutrons from previous pulses. Using a tunable beam at the 88-Inch Cyclotron at Lawrence Berkeley National Laboratory, neutrons were produced via thick-target breakup of 16 MeV…
▽ More
A new double time-of-flight (dTOF) neutron spectroscopy technique has been developed for pulsed broad spectrum sources with a duty cycle that results in frame overlap, where fast neutrons from a given pulse overtake slower neutrons from previous pulses. Using a tunable beam at the 88-Inch Cyclotron at Lawrence Berkeley National Laboratory, neutrons were produced via thick-target breakup of 16 MeV deuterons on a beryllium target in the cyclotron vault. The breakup spectral shape was deduced from a dTOF measurement using an array of EJ-309 organic liquid scintillators. Simulation of the neutron detection efficiency of the scintillator array was performed using both GEANT4 and MCNP6. The efficiency-corrected spectral shape was normalized using a foil activation technique to obtain the energy-dependent flux of the neutron beam at zero degrees with respect to the incoming deuteron beam. The dTOF neutron spectrum was compared to spectra obtained using HEPROW and GRAVEL pulse height spectrum unfolding techniques. While the unfolding and dTOF results exhibit some discrepancies in shape, the integrated flux values agree within two standard deviations. This method obviates neutron time-of-flight spectroscopy challenges posed by pulsed beams with frame overlap and opens new opportunities for pulsed white neutron source facilities.
△ Less
Submitted 30 September, 2020;
originally announced October 2020.
-
Restricted spin-range correction in the Oslo Method: The example of nuclear level density and $γ$-ray strength function from $^{239}\mathrm{Pu}(\mathrm{d,p}γ)^{240}\mathrm{Pu}$
Authors:
F. Zeiser,
G. M. Tveten,
G. Potel,
A. C. Larsen,
M. Guttormsen,
T. A. Laplace,
S. Siem,
D. L. Bleuel,
B. L. Goldblum,
L. A. Bernstein,
F. L. Bello Garrote,
L. Crespo Campo,
T. K. Eriksen,
A. Görgen,
K. Hadynska-Klek,
V. W. Ingeberg,
J. E. Midtbø,
E. Sahin,
T. Tornyi,
A. Voinov,
M. Wiedeking,
J. Wilson
Abstract:
The Oslo Method has been applied to particle-$γ$ coincidences following the $^{239}\mathrm{Pu}$(d,p) reaction to obtain the nuclear level density (NLD) and $γ$-ray strength function ($γ$SF) of $^{240}\mathrm{Pu}$. The experiment was conducted with a 12 MeV deuteron beam at the Oslo Cyclotron Laboratory. The low spin transfer of this reaction leads to a spin-parity mismatch between populated and in…
▽ More
The Oslo Method has been applied to particle-$γ$ coincidences following the $^{239}\mathrm{Pu}$(d,p) reaction to obtain the nuclear level density (NLD) and $γ$-ray strength function ($γ$SF) of $^{240}\mathrm{Pu}$. The experiment was conducted with a 12 MeV deuteron beam at the Oslo Cyclotron Laboratory. The low spin transfer of this reaction leads to a spin-parity mismatch between populated and intrinsic levels. This is a challenge for the Oslo Method as it can have a significant impact on the extracted NLD and $γ$SF. We have developed an iterative approach to ensure consistent results even for cases with a large spin-parity mismatch, in which we couple Green's Function Transfer calculations of the spin-parity dependent population cross-section to the nuclear decay code RAINIER. The resulting $γ$SF shows a pronounced enhancement between 2-4 MeV that is consistent with the location of the low-energy orbital $M1$ scissors mode.
△ Less
Submitted 25 July, 2019; v1 submitted 5 April, 2019;
originally announced April 2019.
-
Impact of restricted spin-ranges in the Oslo Method: The example of (d,p)$^{240}\mathrm{Pu}$
Authors:
F. Zeiser,
G. Potel,
G. M. Tveten,
A. C. Larsen,
M. Guttormsen,
T. A. Laplace,
S. Siem,
D. L. Bleuel,
B. L. Goldblum,
L. A. Bernstein,
F. L. Bello Garrote,
L. Crespo Campo,
T. K. Eriksen,
A. Görgen,
K. Hadynska-Klek,
J. E. Midtbø,
T. Renstrøm,
E. Sahin,
T. Tornyi,
A. Voinov,
M. Wiedeking
Abstract:
In this paper we present the first systematic analysis of the impact of the populated vs. intrinsic spin distribution on the nuclear level density and $γ$-ray strength function retrieved through the Oslo Method. We illustrate the effect of the spin distribution on the recently performed $^{239}\mathrm{Pu}$(d,p$γ$)$^{240}\mathrm{Pu}$ experiment using a 12 MeV deuteron beam performed at the Oslo Cyc…
▽ More
In this paper we present the first systematic analysis of the impact of the populated vs. intrinsic spin distribution on the nuclear level density and $γ$-ray strength function retrieved through the Oslo Method. We illustrate the effect of the spin distribution on the recently performed $^{239}\mathrm{Pu}$(d,p$γ$)$^{240}\mathrm{Pu}$ experiment using a 12 MeV deuteron beam performed at the Oslo Cyclotron Lab. In the analysis we couple state-of-the-art calculations for the populated spin-distributions with the Monte-Carlo nuclear decay code RAINIER to compare Oslo Method results to the known input. We find that good knowledge of the populated spin distribution is crucial and show that the populated distribution has a significant impact on the extracted nuclear level density and $γ$-ray strength function for the $^{239}\mathrm{Pu}$(d,p$γ$)$^{240}\mathrm{Pu}$ case.
△ Less
Submitted 11 February, 2019; v1 submitted 8 February, 2019;
originally announced February 2019.
-
Energy dependence of the prompt $γ$-ray emission from the $(d,p)$-induced fission of $^{234}\mathrm{U}^{*}$ and $^{240}\mathrm{Pu}^{*}$
Authors:
S. J. Rose,
F. Zeiser,
J. N. Wilson,
A. Oberstedt,
S. Oberstedt,
S. Siem,
G. M. Tveten,
L. A. Bernstein,
D. L. Bleuel,
J. A. Brown,
L. Crespo Campo,
F. Giacoppo,
A. Görgen,
M. Guttormsen,
K. Hadyńska,
A. Hafreager,
T. W. Hagen,
M. Klintefjord,
T. A. Laplace,
A. C. Larsen,
T. Renstrøm,
E. Sahin,
C. Schmitt,
T. G. Tornyi,
M. Wiedeking
Abstract:
Prompt fission $γ$-rays are responsible for approximately 5\% of the total energy released in fission, and therefore important to understand when modelling nuclear reactors. In this work we present prompt $γ$-ray emission characteristics in fission, for the first time as a function of the nuclear excitation energy of the fissioning system. Emitted $γ$-ray spectra were measured, and $γ$-ray multipl…
▽ More
Prompt fission $γ$-rays are responsible for approximately 5\% of the total energy released in fission, and therefore important to understand when modelling nuclear reactors. In this work we present prompt $γ$-ray emission characteristics in fission, for the first time as a function of the nuclear excitation energy of the fissioning system. Emitted $γ$-ray spectra were measured, and $γ$-ray multiplicities and average and total $γ$ energies per fission were determined for the $^{233}$U(d,pf) reaction for excitation energies between 4.8 and 10 MeV, and for the $^{239}$Pu(d,pf) reaction between 4.5 and 9 MeV. The spectral characteristics show no significant change as a function of excitation energy above the fission barrier, despite the fact that an extra $\sim$5 MeV of energy is potentially available in the excited fragments for $γ$-decay. The measured results are compared to model calculations made for prompt $γ$-ray emission with the fission model code GEF. Further comparison with previously obtained results from thermal neutron induced fission is made to characterize possible differences arising from using the surrogate (d,p) reaction.
△ Less
Submitted 6 July, 2017;
originally announced July 2017.
-
Statistical properties of $^{243}$Pu, and $^{242}$Pu(n,$γ$) cross section calculation
Authors:
T. A. Laplace,
F. Zeiser,
M. Guttormsen,
A. C. Larsen,
D. L. Bleuel,
L. A. Bernstein,
B. L. Goldblum,
S. Siem,
F. L. Bello Garotte,
J. A. Brown,
L. Crespo Campo,
T. K. Eriksen,
F. Giacoppo,
A. Görgen,
K. Hadyńska-Klȩk,
R. A. Henderson,
M. Klintefjord,
M. Lebois,
T. Renstrøm,
S. J. Rose,
E. Sahin,
T. G. Tornyi,
G. M. Tveten,
A. Voinov,
M. Wiedeking
, et al. (2 additional authors not shown)
Abstract:
The level density and gamma-ray strength function (gammaSF) of 243Pu have been measured in the quasi-continuum using the Oslo method. Excited states in 243Pu were populated using the 242Pu(d,p) reaction. The level density closely follows the constant-temperature level density formula for excitation energies above the pairing gap. The gammaSF displays a double-humped resonance at low energy as also…
▽ More
The level density and gamma-ray strength function (gammaSF) of 243Pu have been measured in the quasi-continuum using the Oslo method. Excited states in 243Pu were populated using the 242Pu(d,p) reaction. The level density closely follows the constant-temperature level density formula for excitation energies above the pairing gap. The gammaSF displays a double-humped resonance at low energy as also seen in previous investigations of actinide isotopes. The structure is interpreted as the scissors resonance and has a centroid of omega_{SR}=2.42(5)MeV and a total strength of B_{SR}=10.1(15)mu_N^2, which is in excellent agreement with sum-rule estimates. The measured level density and gammaSF were used to calculate the 242Pu(n,gamma) cross section in a neutron energy range for which there were previously no measured data.
△ Less
Submitted 1 February, 2016; v1 submitted 5 November, 2015;
originally announced November 2015.
