-
Defective fission correlation data from the 2E-2v method
Authors:
Kaj Jansson,
Ali Al-Adili,
Erik Andersson Sundén,
Stephan Pomp,
Alf Göök,
Stephan Oberstedt
Abstract:
The double-energy double-velocity ($2E$-$2v$) method allows assessing fission-fragment mass yields prior to and after prompt neutron emission with high resolution. It is, therefore, considered as a complementary technique to assess average prompt neutron multiplicity as a function of fragment properties. We have studied the intrinsic features of the $2E$-$2v$ method by means of event-wise generate…
▽ More
The double-energy double-velocity ($2E$-$2v$) method allows assessing fission-fragment mass yields prior to and after prompt neutron emission with high resolution. It is, therefore, considered as a complementary technique to assess average prompt neutron multiplicity as a function of fragment properties. We have studied the intrinsic features of the $2E$-$2v$ method by means of event-wise generated fission-fragment data and found severe short-comings in the method itself as well as in some common practice of application. We find that the $2E$-$2v$ method leads to large deviations in the correlation between the prompt neutron multiplicity and pre-neutron mass, which deforms and exaggerates the so called `sawtooth' shape of $\barν(A)$. We have identified the treatment of prompt neutron emission from the fragments as the origin of the problem. The intrinsic nature of this deficiency, risk to render $2E$-$2v$ experiments much less interesting. We suggest a method to correct the $2E$-$2v$ data, and recommend applying this method to previous data acquired in $2E$-$2v$ experiments, as well.
△ Less
Submitted 20 September, 2017;
originally announced September 2017.
-
Designing an upgrade of the Medley setup for light-ion production and fission cross-section measurements
Authors:
Kaj Jansson,
Cecilia Gustavsson,
Ali Al-Adili,
Anders Hjalmarsson,
Erik Andersson-Sundén,
Alexander V. Prokofiev,
Diego Tarrío,
Stephan Pomp
Abstract:
Measurements of neutron-induced fission cross sections and light-ion production are planned in the energy range 1-40 MeV at the upcoming Neutrons For Science (NFS) facility. In order to prepare our detector setup for the neutron beam with continuous energy spectrum, a simulation software was written using the Geant4 toolkit for both measurement situations. The neutron energy range around 20 MeV is…
▽ More
Measurements of neutron-induced fission cross sections and light-ion production are planned in the energy range 1-40 MeV at the upcoming Neutrons For Science (NFS) facility. In order to prepare our detector setup for the neutron beam with continuous energy spectrum, a simulation software was written using the Geant4 toolkit for both measurement situations. The neutron energy range around 20 MeV is troublesome when it comes to the cross sections used by Geant4 since data-driven cross sections are only available below 20 MeV but not above, where they are based on semi-empirical models. Several customisations were made to the standard classes in Geant4 in order to produce consistent results over the whole simulated energy range.
Expected uncertainties are reported for both types of measurements. The simulations have shown that a simultaneous precision measurement of the three standard cross sections H(n,n), $^{235}$U(n,f) and $^{238}$U(n,f) relative to each other is feasible using a triple layered target. As high resolution timing detectors for fission fragments we plan to use Parallel Plate Avalanche Counters (PPACs). The simulation results have put some restrictions on the design of these detectors as well as on the target design. This study suggests a fissile target no thicker than 2 micrometers (1.7 mg/cm$^2$) and a PPAC foil thickness preferably less than 1 micrometer. We also comment on the usability of Geant4 for simulation studies of neutron reactions in this energy range.
△ Less
Submitted 23 June, 2015;
originally announced June 2015.
-
Light-ion production in the interaction of 175 MeV quasi-mono-energetic neutrons with iron and with bismuth
Authors:
R. Bevilacqua,
K. Jansson,
S. Pomp,
P. Andersson,
J. Blomgren,
C. Gustavsson,
A. Hjalmarsson,
V. D. Simutkin,
M. Österlund,
A. J. Koning,
A. V. Prokofiev,
M. Hayashi,
S. Hirayama,
Y. Naitou,
Y. Watanabe,
U. Tippawan,
S. G. Mashnik,
L. M. Kerby,
F. -R. Lecolley,
N. Marie,
J. -C. David,
S. Leray
Abstract:
Nuclear data for neutron-induced reactions in the intermediate energy range of 20 to 200 MeV are of great importance for the development of nuclear reaction codes since little data exist in that range. Also several different applications benefit from such data, notably accelerator-driven incineration of nuclear waste. The Medley setup was used for a series of measurements of p, d, t, $^3$He and…
▽ More
Nuclear data for neutron-induced reactions in the intermediate energy range of 20 to 200 MeV are of great importance for the development of nuclear reaction codes since little data exist in that range. Also several different applications benefit from such data, notably accelerator-driven incineration of nuclear waste. The Medley setup was used for a series of measurements of p, d, t, $^3$He and $α$-particle production by 175 MeV quasi-mono-energetic neutrons on various target nuclei. The measurements were performed at the The Svedberg Laboratory in Uppsala, Sweden. Eight detector telescopes placed at angles between 20$^\circ$ and 160$^\circ$ were used. Medley uses the $ΔE$-$ΔE$-$E$ technique to discriminate among the particle types and is able to measure double-differential cross sections over a wide range of particle energies. This paper briefly describes the experimental setup, summarizes the data analysis and reports on recent changes in the previously reported preliminary data set on bismuth. Experimental data are compared with INCL4.5-Abla07, MCNP6 using CEM03.03, TALYS and PHITS model calculations as well as with nuclear data evaluations. The models agree fairly well overall but in some cases systematic differences are found.
△ Less
Submitted 12 November, 2014;
originally announced November 2014.
-
Ion counting efficiencies at the IGISOL facility
Authors:
A. Al-Adili,
K. Jansson,
M. Lantz,
A. Solders,
C. Gustavsson,
A. Mattera,
A. V. Prokofiev,
V. Rakopoulos,
D. Tarrío,
S. Wiberg,
M. Österlund,
S. Pomp
Abstract:
At the IGISOL-JYFLTRAP facility, fission mass yields can be studied at high precision. Fission fragments from a U target are passing through a Ni foil and entering a gas filled chamber. The collected fragments are guided through a mass separator to a Penning trap where their masses are identified. This simulation work focuses on how different fission fragment properties (mass, charge and energy) a…
▽ More
At the IGISOL-JYFLTRAP facility, fission mass yields can be studied at high precision. Fission fragments from a U target are passing through a Ni foil and entering a gas filled chamber. The collected fragments are guided through a mass separator to a Penning trap where their masses are identified. This simulation work focuses on how different fission fragment properties (mass, charge and energy) affect the stopping efficiency in the gas cell. In addition, different experimental parameters are varied (e. g. U and Ni thickness and He gas pressure) to study their impact on the stopping efficiency. The simulations were performed using the Geant4 package and the SRIM code. The main results suggest a small variation in the stopping efficiency as a function of mass, charge and kinetic energy. It is predicted that heavy fragments are stopped about 9% less efficiently than the light fragments. However it was found that the properties of the U, Ni and the He gas influences this behavior. Hence it could be possible to optimize the efficiency.
△ Less
Submitted 2 September, 2014;
originally announced September 2014.
-
Measuring light-ion production and fission cross sections versus elastic np-scattering at the upcoming NFS facility
Authors:
K. Jansson,
C. Gustavsson,
S. Pomp,
A. V. Prokofiev,
G. Scian,
D. Tarrío,
U. Tippawan
Abstract:
The Medley setup is planned to be moved to and used at the new neutron facility NFS where measurements of light-ion production and fission cross-sections are planned at 1-40 MeV. Medley has eight detector telescopes providing Delta E-Delta E-E data, each consisting of two silicon detectors and a CsI(Tl) detector at the back. The telescope setup is rotatable and can be made to cover any angle. Medl…
▽ More
The Medley setup is planned to be moved to and used at the new neutron facility NFS where measurements of light-ion production and fission cross-sections are planned at 1-40 MeV. Medley has eight detector telescopes providing Delta E-Delta E-E data, each consisting of two silicon detectors and a CsI(Tl) detector at the back. The telescope setup is rotatable and can be made to cover any angle. Medley has previously been used in many measurements at The Svedberg Laboratory (TSL) in Uppsala mainly with a quasi-mono-energetic neutron beam at 96 and 175 MeV.
To be able to do measurements at NFS, which will have a white neutron beam, Medley needs to detect the reaction products with a high temporal resolution providing the ToF of the primary neutron. In this paper we discuss the design of the Medley upgrade along with simulations of the setup. We explore the use of Parallel Plate Avalanche Counters (PPACs) which work very well for detecting fission fragments but require more consideration for detecting deeply penetrating particles.
△ Less
Submitted 2 April, 2013;
originally announced April 2013.
-
Light-ion production from O, Si, Fe and Bi induced by 175 MeV quasi-monoenergetic neutron
Authors:
R. Bevilacqua,
S. Pomp,
K. Jansson,
C. Gustavsson,
M. Osterlund,
V. Simutkin,
M. Hayashi,
S. Hirayama,
Y. Naitou,
Y. Watanabe,
A. Hjalmarsson,
A. Prokofiev,
U. Tippawan,
F. -R. Lecolley,
N. Marie,
S. Leray,
J. -C. David,
S. Mashnik
Abstract:
We have measured double-differential cross sections in the interaction of 175 MeV quasimonoenergetic neutrons with O, Si, Fe and Bi. We have compared these results with model calculations with INCL4.5-Abla07, MCNP6 and TALYS-1.2. We have also compared our data with PHITS calculations, where the pre-equilibrium stage of the reaction was accounted respectively using the JENDL/HE-2007 evaluated data…
▽ More
We have measured double-differential cross sections in the interaction of 175 MeV quasimonoenergetic neutrons with O, Si, Fe and Bi. We have compared these results with model calculations with INCL4.5-Abla07, MCNP6 and TALYS-1.2. We have also compared our data with PHITS calculations, where the pre-equilibrium stage of the reaction was accounted respectively using the JENDL/HE-2007 evaluated data library, the quantum molecular dynamics model (QMD) and a modified version of QMD (MQMD) to include a surface coalescence model. The most crucial aspect is the formation and emission of composite particles in the pre-equilibrium stage.
△ Less
Submitted 21 May, 2013; v1 submitted 19 March, 2013;
originally announced March 2013.
