-
Timing performance of radiation hard MALTA monolithic Pixel sensors
Authors:
G. Gustavino,
P. Allport,
I. Asensi,
D. V. Berlea,
D. Bortoletto,
C. Buttar,
F. Dachs,
V. Dao,
H. Denizli,
D. Dobrijevic,
L. Flores,
A. Gabrielli,
L. Gonella,
V. González,
M. LeBlanc,
K. Oyulmaz,
H. Pernegger,
F. Piro,
P. Riedler,
H. Sandaker,
C. Solans,
W. Snoeys,
T. Suligoj,
M. van Rijnbach,
A. Sharma
, et al. (4 additional authors not shown)
Abstract:
The MALTA family of Depleted Monolithic Active Pixel Sensor (DMAPS) produced in Tower 180 nm CMOS technology targets radiation hard applications for the HL-LHC and beyond. Several process modifications and front-end improvements have resulted in radiation hardness up to $2 \times 10^{15}~1~\text{MeV}~\text{n}_{eq}/\text{cm}^2$ and time resolution below 2 ns, with uniform charge collection efficien…
▽ More
The MALTA family of Depleted Monolithic Active Pixel Sensor (DMAPS) produced in Tower 180 nm CMOS technology targets radiation hard applications for the HL-LHC and beyond. Several process modifications and front-end improvements have resulted in radiation hardness up to $2 \times 10^{15}~1~\text{MeV}~\text{n}_{eq}/\text{cm}^2$ and time resolution below 2 ns, with uniform charge collection efficiency across the Pixel of size $36.4 \times 36.4~μ\text{m}^2$ with a $3~μ\text{m}^2$ electrode size. The MALTA2 demonstrator produced in 2021 on high-resistivity epitaxial silicon and on Czochralski substrates implements a new cascoded front-end that reduces the RTS noise and has a higher gain. This contribution shows results from MALTA2 on timing resolution at the nanosecond level from the CERN SPS test-beam campaign of 2021.
△ Less
Submitted 31 January, 2023; v1 submitted 29 September, 2022;
originally announced September 2022.
-
Recent results with radiation-tolerant TowerJazz 180 nm MALTA Sensors
Authors:
Matt LeBlanc,
Phil Allport,
Igancio Asensi,
Dumitru-Vlad Berlea,
Daniela Bortoletto,
Craig Buttar,
Florian Dachs,
Valerio Dao,
Haluk Denizli,
Dominik Dobrijevic,
Leyre Flores,
Andrea Gabrielli,
Laura Gonella,
Vicente González,
Giuliano Gustavino,
Kaan Oyulmaz,
Heinz Pernegger,
Francesco Piro,
Petra Riedler,
Heidi Sandaker,
Carlos Solans,
Walter Snoeys,
Tomislav Suligoj,
Milou van Rijnbach,
Abhishek Sharma
, et al. (4 additional authors not shown)
Abstract:
To achieve the physics goals of future colliders, it is necessary to develop novel, radiation-hard silicon sensors for their tracking detectors. We target the replacement of hybrid pixel detectors with Depleted Monolithic Active Pixel Sensors (DMAPS) that are radiation-hard, monolithic CMOS sensors. We have designed, manufactured and tested the MALTA series of sensors, which are DMAPS in the 180 n…
▽ More
To achieve the physics goals of future colliders, it is necessary to develop novel, radiation-hard silicon sensors for their tracking detectors. We target the replacement of hybrid pixel detectors with Depleted Monolithic Active Pixel Sensors (DMAPS) that are radiation-hard, monolithic CMOS sensors. We have designed, manufactured and tested the MALTA series of sensors, which are DMAPS in the 180 nm TowerJazz CMOS imaging technology. MALTA have a pixel pitch well below current hybrid pixel detectors, high time resolution (< 2 ns) and excellent charge collection efficiency across pixel geometries. These sensors have a total silicon thickness of between 50-300 $μ$m, implying reduced material budgets and multiple scattering rates for future detectors which utilize such technology. Furthermore, their monolithic design bypasses the costly stage of bump-bonding in hybrid sensors and can substantially reduce detector costs. This contribution presents the latest results from characterization studies of the MALTA2 sensors, including results demonstrating the radiation tolerance of these sensors.
△ Less
Submitted 9 September, 2022;
originally announced September 2022.
-
The FP420 R&D Project: Higgs and New Physics with forward protons at the LHC
Authors:
M. G. Albrow,
R. B. Appleby,
M. Arneodo,
G. Atoian,
I. L. Azhgirey,
R. Barlow,
I. S. Bayshev,
W. Beaumont,
L. Bonnet,
A. Brandt,
P. Bussey,
C. Buttar,
J. M. Butterworth,
M. Carter,
B. E. Cox,
D. Dattola,
C. Da Via,
J. de Favereau,
D. d'Enterria,
P. De Remigis,
A. De Roeck,
E. A. De Wolf,
P. Duarte,
J. R. Ellis,
B. Florins
, et al. (73 additional authors not shown)
Abstract:
We present the FP420 R&D project, which has been studying the key aspects of the development and installation of a silicon tracker and fast-timing detectors in the LHC tunnel at 420 m from the interaction points of the ATLAS and CMS experiments. These detectors would measure precisely very forward protons in conjunction with the corresponding central detectors as a means to study Standard Model…
▽ More
We present the FP420 R&D project, which has been studying the key aspects of the development and installation of a silicon tracker and fast-timing detectors in the LHC tunnel at 420 m from the interaction points of the ATLAS and CMS experiments. These detectors would measure precisely very forward protons in conjunction with the corresponding central detectors as a means to study Standard Model (SM) physics, and to search for and characterise New Physics signals. This report includes a detailed description of the physics case for the detector and, in particular, for the measurement of Central Exclusive Production, pp --> p + phi + p, in which the outgoing protons remain intact and the central system phi may be a single particle such as a SM or MSSM Higgs boson. Other physics topics discussed are gamma-gamma and gamma-p interactions, and diffractive processes. The report includes a detailed study of the trigger strategy, acceptance, reconstruction efficiencies, and expected yields for a particular p p --> p H p measurement with Higgs boson decay in the b-bbar mode. The document also describes the detector acceptance as given by the LHC beam optics between the interaction points and the FP420 location, the machine backgrounds, the new proposed connection cryostat and the moving ("Hamburg") beam-pipe at 420 m, and the radio-frequency impact of the design on the LHC. The last part of the document is devoted to a description of the 3D silicon sensors and associated tracking performances, the design of two fast-timing detectors capable of accurate vertex reconstruction for background rejection at high-luminosities, and the detector alignment and calibration strategy.
△ Less
Submitted 2 January, 2009; v1 submitted 2 June, 2008;
originally announced June 2008.
