-
Proton induced reaction on $^{108}$Cd for astrophysical p-process studies
Authors:
Sukhendu Saha,
Dipali Basak,
Tanmoy Bar,
Lalit Kumar Sahoo,
Jagannath Datta,
Sandipan Dasgupta,
Norikazu Kinoshita,
Chinmay Basu
Abstract:
The proton capture cross-section of the least abundant proton-rich stable isotope of cadmium, $^{108}$Cd (abundance 0.89\%), has been measured near the Gamow window corresponding to a temperature range of 3-4 GK. The measurement of the $^{108}$Cd(p,$γ$)$^{109}$In reaction was carried out using the activation technique. The cross-section at the lowest energy point of 3T$_9$, E$_p$$^{lab}$= 2.28 MeV…
▽ More
The proton capture cross-section of the least abundant proton-rich stable isotope of cadmium, $^{108}$Cd (abundance 0.89\%), has been measured near the Gamow window corresponding to a temperature range of 3-4 GK. The measurement of the $^{108}$Cd(p,$γ$)$^{109}$In reaction was carried out using the activation technique. The cross-section at the lowest energy point of 3T$_9$, E$_p$$^{lab}$= 2.28 MeV, has been reported for the first time. The astrophysical S-factor was measured in the energy range relevant to the astrophysical p-process, between E$_p$$^{cm}$= 2.29 and 6.79 MeV. The experimental results have been compared with theoretical predictions of Hauser-Feshbach statistical model calculations using TALYS-1.96. A calculated proton-optical potential was implemented to achieve better fitting, with different combinations of available nuclear level densities (NLDs) and $γ$-ray strength functions in TALYS-1.96. The calculations provided satisfactory agreement with the experimental results. The reaction rate was calculated using the calculated potential in TALYS-1.96 and compared with the values provided in the REACLIB database.
△ Less
Submitted 2 November, 2024;
originally announced November 2024.
-
Fabrication of $^{108}$Cd target for the astrophysical p-process studies
Authors:
Sukhendu Saha,
Mousri Paul,
Lalit Kumar Sahoo,
Dipali Basak,
Tanmoy Bar,
Jagannath Datta,
Sandipan Dasgupta,
G. L. N. Reddy,
Chinmay Basu
Abstract:
The detailed process of preparing enriched $^{108}$Cd targets on mylar and copper backing using the vacuum evaporation technique is described. These targets were employed in an experiment to measure the proton capture cross-section at energies significantly below the Coulomb barrier, for the astrophysical p-process studies. Due to the low melting point and high vapor pressure of cadmium, some adju…
▽ More
The detailed process of preparing enriched $^{108}$Cd targets on mylar and copper backing using the vacuum evaporation technique is described. These targets were employed in an experiment to measure the proton capture cross-section at energies significantly below the Coulomb barrier, for the astrophysical p-process studies. Due to the low melting point and high vapor pressure of cadmium, some adjustments were implemented in the Telemark multipocket e-beam setup. The target thickness was determined through the measurement of alpha particle energy loss from a triple alpha source and also by RBS measurements. The thickness of the $^{108}$Cd films varies between 290 to 660 $μ$g/cm$^2$, with a non-uniformity of approximately 10$\%$. X-ray Photoelectron Spectroscopy (XPS) and X-ray Fluorescence (XRF) analyses were conducted to examine the presence of impurities and to assess surface morphology, phase, and chemical composition.
△ Less
Submitted 19 January, 2024;
originally announced February 2024.
-
First (calibration) experiment using proton beam from FRENA at SINP
Authors:
C. Basu,
K. Banerjee,
T. K. Ghosh,
G. Mukherjee,
C. Bhattacharya,
Shraddha S Desai,
R. Shil,
A. K. Saha,
J. K. Meena,
T. Bar,
D. Basak,
L. K. Sahoo,
S. Saha,
C. Marick,
D. Das,
D. Das,
D. Das,
M. Kujur,
S. Roy,
S. S. Basu,
U. Gond,
A. Saha,
A. Das,
M. Samanta,
P. Saha
, et al. (1 additional authors not shown)
Abstract:
This work presents the first calibration experiment of a 3 MV Tandetron accelerator, FRENA, performed in May 2022. The $^7$Li(p,n) reaction threshold was measured to calibrate the terminal voltage measuring device. A LiF target of thickness 175 $μ$g/cm$^2$ was used in the experiment. The measured threshold was 1872$\pm$2.7 keV, indicating 6$-$10 keV energy shift.
This work presents the first calibration experiment of a 3 MV Tandetron accelerator, FRENA, performed in May 2022. The $^7$Li(p,n) reaction threshold was measured to calibrate the terminal voltage measuring device. A LiF target of thickness 175 $μ$g/cm$^2$ was used in the experiment. The measured threshold was 1872$\pm$2.7 keV, indicating 6$-$10 keV energy shift.
△ Less
Submitted 24 January, 2024;
originally announced February 2024.
-
Study of $^{113}$In($α,α$) elastic scattering to determine $α$-optical potential relevant for astrophysical $γ$-process
Authors:
Dipali Basak,
Tanmoy Bar,
Lalit Kumar Sahoo,
Sukhendu Saha,
T. K. Rana,
S. Manna,
C. Bhattacharya,
Samir Kundu,
J. K. Sahoo,
J. K. Meena,
A. K. Saha,
Ashok Kumar Mondal,
Chinmay Basu
Abstract:
The $α$-optical potential is one of the key input parameters used to measure the reaction rate of the ($γ,α$)-process using the Hauser-Feshbach(HF) statistical model and the principle of detailed balance. $α$-elastic scattering experiment on $^{113}$In $p$-nucleus was carried out in the energy range E$_{lab}$=26$-$32 MeV. The vacuum evaporation technique was used to prepare the $^{113}$In target~(…
▽ More
The $α$-optical potential is one of the key input parameters used to measure the reaction rate of the ($γ,α$)-process using the Hauser-Feshbach(HF) statistical model and the principle of detailed balance. $α$-elastic scattering experiment on $^{113}$In $p$-nucleus was carried out in the energy range E$_{lab}$=26$-$32 MeV. The vacuum evaporation technique was used to prepare the $^{113}$In target~($\sim$86 $μ$g/cm$^2$). An energy-dependent local optical potential parameters set was obtained by analysing the experimental elastic scattering angular distribution data. The local potential parameters are extrapolated for lower energies and are used to measure the $^{113}$In($α,γ$) reaction cross-section.
△ Less
Submitted 15 January, 2024;
originally announced January 2024.
-
Experimental study of $α$-induced reactions on $^{113}$In for astrophysical $p$-process
Authors:
Dipali Basak,
Tanmoy Bar,
Abhijit Roy,
Lalit Kumar Sahoo,
Sukhendu Saha,
Jagannath Datta,
Sandipan Dasgupta,
Chinmay Basu
Abstract:
Neutron deficient nuclei from $^{74}$Se$-^{196}$Hg are thought to be produced by $γ$-induced reactions ($γ$,n), ($γ$,p) and ($γ,α$) processes. The relatively high abundance of $^{113}$In odd A $p$-nuclei has inspired to study its production processes. As reaction with $γ$-beam is difficult to perform in the laboratory, $γ$-induced reaction rate is calculated from the inverse reaction data employin…
▽ More
Neutron deficient nuclei from $^{74}$Se$-^{196}$Hg are thought to be produced by $γ$-induced reactions ($γ$,n), ($γ$,p) and ($γ,α$) processes. The relatively high abundance of $^{113}$In odd A $p$-nuclei has inspired to study its production processes. As reaction with $γ$-beam is difficult to perform in the laboratory, $γ$-induced reaction rate is calculated from the inverse reaction data employing reciprocity theorem. Stacked foil activation method was used to measure the $^{113}$In($α,γ$) and $^{113}$In($α$, n) reactions cross-section near the astrophysical energies. Theoretical statistical model calculations were performed with different nuclear input parameters and compared with the experimental results. An appropriate $α$-optical potential has been identified from the ($α,γ$) and ($α$, n) fitting, which provides the major source of uncertainty in the statistical model calculations. The other nuclear input parameters like level density, and $γ$-ray strength function were also constrained for theoretical calculations. $^{113}$In($α,γ$)$^{117}$Sb and $^{117}$Sb($α,γ$)$^{113}$In reaction rates were calculated using best-fitted input parameters.
△ Less
Submitted 12 January, 2024;
originally announced January 2024.
-
Measurement of $^{144}$Sm(p,$γ$) cross-section at Gamow energies
Authors:
Tanmoy Bar,
Dipali Basak,
Lalit Kumar Sahoo,
Sukhendu Saha,
Jagannath Datta,
Sandipan Dasgupta,
Chinmay Basu
Abstract:
The cross-section measurement of $^{144}$Sm(p, $γ$)$^{145}$Eu (T$_{1/2}=$5.93(4) days) reaction has been performed at proton energies around 2.6, 3.1, 3.7, 4.1, 4.2, 4.7, 5.1, 5.5, 5.9, 6.4, 6.8 MeV using the activation technique. These energies correspond to the Gamow window for 3, 4 GK and a partial portion for 2 GK. $^{144}$Sm has been chosen for the present study because of its significantly h…
▽ More
The cross-section measurement of $^{144}$Sm(p, $γ$)$^{145}$Eu (T$_{1/2}=$5.93(4) days) reaction has been performed at proton energies around 2.6, 3.1, 3.7, 4.1, 4.2, 4.7, 5.1, 5.5, 5.9, 6.4, 6.8 MeV using the activation technique. These energies correspond to the Gamow window for 3, 4 GK and a partial portion for 2 GK. $^{144}$Sm has been chosen for the present study because of its significantly higher abundance compared to the other neighboring $p$-nuclides (Z $>$ 50). The astrophysical $S-$factor of this reaction has been measured for the first time at E$^{cm}_p=$ 2.57$\pm$0.13 MeV, $S-$ factor$=$2.542$\pm$1.152($\times$10$^{10}$) MeV-b. Cross-section data were compared with the previously measured experimental data from literature and the theoretical predictions obtained using Hauser-Feshbach statistical model codes TALYS 1.96 and NON-SMOKER. A satisfactory agreement between experimental data and theoretical results was observed. Molecular deposition technique was used to prepare the $^{144}$Sm targets having thickness between 100$-$350 $μ$g/cm$^2$ on Al backing. Obtained results were utilized to predict the reaction rates for $^{144}$Sm (p, $γ$) and $^{145}$Eu ($γ$, p) reactions using TALYS 1.96 and the reciprocity theorem.
△ Less
Submitted 7 January, 2024;
originally announced January 2024.
-
Lithium fluoride (LiF) target preparation for nuclear physics experiment
Authors:
Lalit Kumar Sahoo,
Ashok Kumar Mondal,
Dipali Basak,
Chinmay Basu,
Suraj Kumar Karan
Abstract:
The LiF target preparation on self-supporting Ag backing (LiF/Ag) is discussed in a detailed manner using vacuum evaporation process. The target thickness is measured using the energy loss of three line alpha source. 183.74 μg/cm 2 thickness of LiF is achieved through the evaporation process. Good uniformity of targets is observed. Non-uniformity in targets is found within 6 %. The XPS analysis co…
▽ More
The LiF target preparation on self-supporting Ag backing (LiF/Ag) is discussed in a detailed manner using vacuum evaporation process. The target thickness is measured using the energy loss of three line alpha source. 183.74 μg/cm 2 thickness of LiF is achieved through the evaporation process. Good uniformity of targets is observed. Non-uniformity in targets is found within 6 %. The XPS analysis confirms the presence of both the F and Li atoms on sample surface.
△ Less
Submitted 4 August, 2022;
originally announced August 2022.
-
Investigation of long lived activity produced due to neutron emitting reactions
Authors:
Tanmoy Bar,
Dipali Basak,
Sukhendu Saha,
Lalit Kumar Sahoo,
Chinmay Basu
Abstract:
In this article, a detailed investigation has been done for the long lived gamma activity due to neutron emitting experiments. These calculations mainly focused on the experiments used for energy calibration purposes. Calibrated energy is one of the most essential features of any accelerator facility. Several experiments have been used for this purpose. Generally, experiments having sharp curvatur…
▽ More
In this article, a detailed investigation has been done for the long lived gamma activity due to neutron emitting experiments. These calculations mainly focused on the experiments used for energy calibration purposes. Calibrated energy is one of the most essential features of any accelerator facility. Several experiments have been used for this purpose. Generally, experiments having sharp curvature change in cross section of yield are used. Neutron emitting experiments are one of such. Around the globe reactions like $^7Li(p,n)$, $^{13}C(p,n)$, $^{19}F(p,n)$, $^{27}Al(p,n)$ etc. are used to calibrate energy of the beam with accelerator terminal voltage. Neutrons coming from these experiments can interact with surrounding elements. These interactions with neutrons can create long lived gamma activity which may interfere with future measurements. The present study has been done keeping in mind the new Facility for Research in Experimental Nuclear Astrophysics (FRENA) at Saha Institute of Nuclear Physics. It is a 3MV tandetron low energy high current machine.
△ Less
Submitted 3 March, 2022;
originally announced March 2022.
-
Direct reaction contribution in the very low energy $^{19}$F(p,$α_0$) reaction
Authors:
Lalit Kumar Sahoo,
Chinmay Basu
Abstract:
The direct reaction component of the $^{19}$F(p,$α_{0}$) reaction at E$_{cm}$=180-600 keV is studied for the data that has become very recently available. This component has been found to be significant in the present work using the direct pickup model in framework of the DWBA formalism and indicate the strong cluster structure of $^{19}$F.
The direct reaction component of the $^{19}$F(p,$α_{0}$) reaction at E$_{cm}$=180-600 keV is studied for the data that has become very recently available. This component has been found to be significant in the present work using the direct pickup model in framework of the DWBA formalism and indicate the strong cluster structure of $^{19}$F.
△ Less
Submitted 8 October, 2020;
originally announced October 2020.
-
A simple method to prepare deuterated targets for experiments relevant to nuclear astrophysics
Authors:
Tanmoy Bar,
Chinmay Basu
Abstract:
In this work, a simple and efficient thin ($50- 350μg/cm^2$) deuterated polyethylene target preparation method is described. The method of easy removal of thin targets from casting surface without using any cryogenic freezing has been described. The difference in thermal expansion properties is used to separate films from glass slides. 3-$α$ radioactive source is used to measure the target thickne…
▽ More
In this work, a simple and efficient thin ($50- 350μg/cm^2$) deuterated polyethylene target preparation method is described. The method of easy removal of thin targets from casting surface without using any cryogenic freezing has been described. The difference in thermal expansion properties is used to separate films from glass slides. 3-$α$ radioactive source is used to measure the target thickness. The material property of the prepared targets is verified by Attenuated total reflection (ATR) method.
△ Less
Submitted 19 August, 2020; v1 submitted 12 April, 2020;
originally announced April 2020.
-
Wood-Saxon alpha potential for p-nuclei $^{106}$Cd and $^{113}$In
Authors:
Dipali Basak,
Chinmay Basu
Abstract:
Alpha elastic scattering of p-nuclei were studied for calculating optical potentials. Choice of the $α$-optical potentials are important to measure the reaction rates of p-process. $^{106}$Cd$(α,α)^{106}$Cd and $^{113}$In$(α,α)^{113}$In elastic scattering cross-section data were used to determine the potential parameter sets at E$_{lab}$= 16.1-27 MeV for $^{106}$Cd and E$_{lab}$=16.14, 19.4 MeV fo…
▽ More
Alpha elastic scattering of p-nuclei were studied for calculating optical potentials. Choice of the $α$-optical potentials are important to measure the reaction rates of p-process. $^{106}$Cd$(α,α)^{106}$Cd and $^{113}$In$(α,α)^{113}$In elastic scattering cross-section data were used to determine the potential parameter sets at E$_{lab}$= 16.1-27 MeV for $^{106}$Cd and E$_{lab}$=16.14, 19.4 MeV for $^{113}$In system. A Wood-Saxon potential form factor is used for both real and imaginary part. The potential parameters extracted in the present study exhibit a satisfactory result with respect to existing global potential parameters.
△ Less
Submitted 26 February, 2020;
originally announced February 2020.
-
Simulation of heat transfer and dissipation in targets used in nuclear astrophysics experiments
Authors:
Tanmoy Bar,
Chinmay Basu,
Mithun Das,
Apurba Kumar Santra,
Swarnendu Sen
Abstract:
This work presents time-dependent numerical calculations of heat generation and dissipation in targets used in high ion-beam current nuclear astrophysics experiments. The simulation is beneficial for choosing the thickness of targets, maximum ion-beam current and design setup for cooling of such targets. It is found that for the very thin target ($^{27}Al(p,p),^{12}C(p,p)$) heat generation inside…
▽ More
This work presents time-dependent numerical calculations of heat generation and dissipation in targets used in high ion-beam current nuclear astrophysics experiments. The simulation is beneficial for choosing the thickness of targets, maximum ion-beam current and design setup for cooling of such targets. It is found that for the very thin target ($^{27}Al(p,p),^{12}C(p,p)$) heat generation inside target is relatively low and a fair amount of high current (few $μ$A)can be used without any melting issue. But in case of thick targets ($^{27}Al(p,γ),^{12}C(p,γ)$) cooling became essential for the survival of reaction target.
△ Less
Submitted 24 February, 2020;
originally announced February 2020.
-
The determination of α-spectroscopic factors and ANC of 16O states using 12C(20Ne,16O)16O reaction at Elab=150 MeV incident energy
Authors:
Ashok Kumar Mondal,
C. Basu,
S. Adhikari,
C. Bhattacharya,
T. K. Rana,
S. Kundu,
S. Manna,
R. Pandey,
P. Roy,
A. Sen,
J. K. Meena,
A. K. Saha,
J. K. Sahoo,
Dipali Basak,
Tanmay Bar,
Haridas Pai,
A. Bisoi,
A. K. Mitra,
Piyasi Biswas
Abstract:
The 12C(20Ne,16O)16O α-transfer reaction at Elab=150 MeV is first time used to determine the ANC of the 6.92 MeV and 7.12 MeV states of 16O. The 20Ne+ 12C potential parameters are also obtained from elastic scattering. The direct reaction code FRESCO is used to determine the α-spectroscopy factor (Sα ) of the three states of 16O (6.92 MeV, 7.12 MeV and 11.52 MeV) and ANC of the two states (6.92 Me…
▽ More
The 12C(20Ne,16O)16O α-transfer reaction at Elab=150 MeV is first time used to determine the ANC of the 6.92 MeV and 7.12 MeV states of 16O. The 20Ne+ 12C potential parameters are also obtained from elastic scattering. The direct reaction code FRESCO is used to determine the α-spectroscopy factor (Sα ) of the three states of 16O (6.92 MeV, 7.12 MeV and 11.52 MeV) and ANC of the two states (6.92 MeV and 7.12 MeV) of 16O. The extracted ANC and Sα are compareable to previous measurements.
△ Less
Submitted 9 January, 2020;
originally announced January 2020.
-
Performance of An Axial Gas Ionization Detector
Authors:
S. Adhikari,
C. Basu,
C. Samanta,
S. S. Brahmachari,
B. P. Das,
P. Basu
Abstract:
An axial gas ionization chamber has been fabricated for use as a $ΔE$ detector in heavy ion induced nuclear reactions. Different operating parameters such as gas type, pressure, anode voltage and anode structures have been optimized. The transparency of the anode structure is observed to play an important role in improving the energy resolution of the detector.
An axial gas ionization chamber has been fabricated for use as a $ΔE$ detector in heavy ion induced nuclear reactions. Different operating parameters such as gas type, pressure, anode voltage and anode structures have been optimized. The transparency of the anode structure is observed to play an important role in improving the energy resolution of the detector.
△ Less
Submitted 11 October, 2006;
originally announced October 2006.
-
Entrance channel dependence in compound nuclear reactions with loosely bound nuclei
Authors:
S. Adhikari,
C. Samanta,
C. Basu,
S. Ray,
A. Chattaerjee,
S. Kailas
Abstract:
The measurement of light charged particles evaporated from the reaction 6,7Li+6Li has been carried out at extreme backward angle in the energy range 14 - 20 MeV. Calculations from the code ALICE91 show that the symmetry of the target-projectile combination and the choice of level density parameter play important roles in explaining the evaporation spectra for these light particle systems. In abo…
▽ More
The measurement of light charged particles evaporated from the reaction 6,7Li+6Li has been carried out at extreme backward angle in the energy range 14 - 20 MeV. Calculations from the code ALICE91 show that the symmetry of the target-projectile combination and the choice of level density parameter play important roles in explaining the evaporation spectra for these light particle systems. In above barrier energy region the fusion cross-section is not suppressed for these loosely bound nuclei.
△ Less
Submitted 13 May, 2005;
originally announced May 2005.
