-
Simple mathematical model for a pairing-induced motion of active and passive particles
Authors:
Hiroaki Ishikawa,
Yuki Koyano,
Hiroaki Ito,
Yutaka Sumino,
Hiroyuki Kitahata
Abstract:
We propose a simple mathematical model that describes a pairing-induced motion of active and passive particles in a two-dimensional system, which is motivated by our previous paper [Ishikawa et al., Phys. Rev. E \textbf{106} (2022) 024604]. We assume the following features; the active and passive particles are connected with a linear spring, the active particle is driven in the direction of the cu…
▽ More
We propose a simple mathematical model that describes a pairing-induced motion of active and passive particles in a two-dimensional system, which is motivated by our previous paper [Ishikawa et al., Phys. Rev. E \textbf{106} (2022) 024604]. We assume the following features; the active and passive particles are connected with a linear spring, the active particle is driven in the direction of the current velocity, and the passive particle is repelled from the active particle. A straight motion, a circular motion, and a slalom motion were observed by numerical simulation. Theoretical analysis reproduces the bifurcation between the straight and circular motions depending on the magnitude of self-propulsion.
△ Less
Submitted 19 March, 2025; v1 submitted 31 December, 2024;
originally announced January 2025.
-
Pattern transition of flow dynamics in a highly water-absorbent granular bed
Authors:
Kojiro Otoguro,
Kiwamu Yoshii,
Yutaka Sumino
Abstract:
An aqueous sodium chloride solution was injected at a controlled rate into a granular bed in a quasi-two-dimensional cell. The granular bed was made of dried, highly water-absorbent gel particles whose swelling rate was controlled by the salinity of the injected fluid. At a high salinity level (low swelling rate), high injection rate, and short timescale, the injected fluid percolated between the…
▽ More
An aqueous sodium chloride solution was injected at a controlled rate into a granular bed in a quasi-two-dimensional cell. The granular bed was made of dried, highly water-absorbent gel particles whose swelling rate was controlled by the salinity of the injected fluid. At a high salinity level (low swelling rate), high injection rate, and short timescale, the injected fluid percolated between the gel particles in an isotropic manner. Meanwhile, at a low salinity level (high swelling rate), low injection rate, and long timescale, the gel particles clogged the flow path, resulting in anisotropic branch-like structures of the injected fluid front. The transition of the injection pattern could be understood based on the ratio of the characteristic timescales of swelling and injection. Moreover, the clogged pattern showed an oscillatory pressure drop whose amplitude was increased with higher salinity. Such an oscillatory behavior observed in an injection process in a swelling gel particle may be relevant in geological situation; i.e., such as fluid migration underground.
△ Less
Submitted 29 January, 2024;
originally announced January 2024.
-
Deformation and motion of giant unilamellar vesicles loaded with gold nanoparticles driven by induced charge electro-osmotic flow
Authors:
Kotaro Nakazawa,
Yoshinori Sonoyama,
Yutaka Sumino
Abstract:
A vesicle is a spherical structure composed of a phospholipid bilayer that is used as a container for chemicals, both it in vivo and it in vitro systems. In both cases, the vesicles can be passively moved using external molecular motors or flows. The active motion of the vesicles can potentially expand their applications in microfluid devices. In this study, we created giant unilamellar vesicles (…
▽ More
A vesicle is a spherical structure composed of a phospholipid bilayer that is used as a container for chemicals, both it in vivo and it in vitro systems. In both cases, the vesicles can be passively moved using external molecular motors or flows. The active motion of the vesicles can potentially expand their applications in microfluid devices. In this study, we created giant unilamellar vesicles (GUVs) that loads dodecanethiol-functionalized gold nanoparticles (AuNPs) using natural swelling method. An external alternating current (AC) electric field was applied to the sample to drive the system. A flow was confirmed with dense optical flow method around GUVs, even in the absence of AuNPs. The quadratic dependence of the flow on applied elecric fields confirms that the flow is due to induced charge electro-osmotic (ICEO) mechanism. Furthermore, the GUVs containing AuNPs moved and deformed significantly under external AC electric fields compared with those without AuNPs. We also confirmed that the translational speed of GUVs was positively correlated with the volume ratio of AuNPs. These experimental results suggest that the motion and deformation of GUVs were cause by ICEO flow, which was unbalanced owing to the presence of localized AuNPs on the membrane.
△ Less
Submitted 9 December, 2023;
originally announced December 2023.
-
Precipitation induced filament pattern of injected fluid controlled by structured cell
Authors:
Shunsuke Tanaka,
Kojiro Otoguro,
Miyuki Kunihiro,
Hiroki Ishikawa,
Yutaka Sumino
Abstract:
Mixing of two fluids can lead to the formation of a precipitate. If one of the fluids is injected into a confined space filled with the other, a created precipitate disrupts the flow locally and forms complex spatiotemporal patterns. The relevance of controlling these patterns has been highlighted in the engineering and geological contexts. Here, we show that such injection patterns can be control…
▽ More
Mixing of two fluids can lead to the formation of a precipitate. If one of the fluids is injected into a confined space filled with the other, a created precipitate disrupts the flow locally and forms complex spatiotemporal patterns. The relevance of controlling these patterns has been highlighted in the engineering and geological contexts. Here, we show that such injection patterns can be controlled consistently by injection rate and obstacles. Our experimental results revealed filament patterns for high injection and low reaction rates, and the injection rate can control the number of active filaments. Furthermore, appropriately spaced obstacles in the cells can straighten the motion of the advancing tip of the filament. A mathematical model based on a moving boundary adopting the effect of precipitation reproduced the phase diagram and the straight motion of filaments in structured cells. Our study clarifies the impact of the nonlinear permeability response on the precipitate density and that of the obstacles in the surrounding medium on the motion of the injected fluid with precipitation.
△ Less
Submitted 9 December, 2023; v1 submitted 29 August, 2023;
originally announced August 2023.
-
Pairing-induced motion of source and inert particles driven by surface tension
Authors:
Hiroaki Ishikawa,
Yuki Koyano,
Hiroyuki Kitahata,
Yutaka Sumino
Abstract:
We experimentally and theoretically investigate systems with a pair of source and inert particles that interacts through the concentration field. The experimental system comprises a camphor disk as the source particle and a metal washer as the inert particle. Both are floated on a red aqueous solution at various concentrations, where the glycerol modifies the viscosity of the aqueous phase. The pa…
▽ More
We experimentally and theoretically investigate systems with a pair of source and inert particles that interacts through the concentration field. The experimental system comprises a camphor disk as the source particle and a metal washer as the inert particle. Both are floated on a red aqueous solution at various concentrations, where the glycerol modifies the viscosity of the aqueous phase. The particles form a pair owing to the attractive lateral capillary force. As the camphor disk spreads surface-active molecules at the aqueous surface, the camphor disk and metal washer move together, driven by the surface tension gradient. The washer is situated in the front of the camphor disk, keeping the distance constant during their motion, which we call a pairing-induced motion. The pairing-induced motion exhibited a transition between circular and straight motions as the glycerol concentration in the aqueous phase changed. Numerical calculations using a model that considers forces caused by the surface tension gradient and lateral capillary interaction reproduced the observed transition in the pairing-induced motion. Moreover, this transition agrees with the result of the linear stability analysis on the reduced dynamical system obtained by the expansion with respect to the particle velocity. Our results reveal that the effect of the particle velocity cannot be overlooked to describe the interaction through the concentration field.
△ Less
Submitted 26 March, 2024; v1 submitted 22 October, 2021;
originally announced October 2021.
-
Spatio-temporal chaos of one-dimensional thin elastic layer with the rate-and-state friction law
Authors:
Yutaka Sumino,
Takuya Saito,
Takahiro Hatano,
Tetsuo Yamaguchi,
Satoshi Ide
Abstract:
Independent of specific local features, global spatio-temporal structures in diverse phenomena around bifurcation points are described by the complex Ginzburg-Landau equation (CGLE) derived using the reductive perturbation method, which includes prediction of spatio-temporal chaos. The generality in the CGLE scheme includes oscillatory instability in slip behavior between stable and unstable regim…
▽ More
Independent of specific local features, global spatio-temporal structures in diverse phenomena around bifurcation points are described by the complex Ginzburg-Landau equation (CGLE) derived using the reductive perturbation method, which includes prediction of spatio-temporal chaos. The generality in the CGLE scheme includes oscillatory instability in slip behavior between stable and unstable regimes. Such slip transitions accompanying spatio-temporal chaos is expected for frictional interfaces of a thin elastic layer made of soft solids, such as rubber or gel, where especially chaotic behavior may be easily discovered due to their compliance. Slow earthquakes observed in the aseismic-to-seismogenic transition zone along a subducting plate are also potential candidates. This article focuses on the common properties of slip oscillatory instability from the viewpoint of a CGLE approach by introducing a drastically simplified model of an elastic body with a thin layer, whose local expression in space and time allows us to employ conventional reduction methods. Special attention is paid to incorporate a rate-and-state friction law supported by microscopic mechanisms beyond the Coulomb friction law. We discuss similarities and discrepancies in the oscillatory instability observed or predicted in soft matter or a slow earthquake.
△ Less
Submitted 21 October, 2022; v1 submitted 3 December, 2020;
originally announced December 2020.
-
Aversion of face-to-face situation of pedestrians eases crowding condition
Authors:
Sho Yajima,
Kiwamu Yoshii,
Yutaka Sumino
Abstract:
We conducted numerical simulation for a crowd of pedestrians. Each pedestrian, modeled with three circles, has a shape whose long axis is perpendicular to the anteroposterior axis, and is designed to move fixed destination. The pedestrians have friction at the surface and soft repulsion. In this study, we newly introduced an active rotation which captures psychological effect to evade face-to-face…
▽ More
We conducted numerical simulation for a crowd of pedestrians. Each pedestrian, modeled with three circles, has a shape whose long axis is perpendicular to the anteroposterior axis, and is designed to move fixed destination. The pedestrians have friction at the surface and soft repulsion. In this study, we newly introduced an active rotation which captures psychological effect to evade face-to-face situation. The numerical simulation revealed that active rotation induces fluidization of system leading to higher flux of pedestrian. We further confirmed that this fluidization is due to fragmentation of force chain induced by the active rotation.
△ Less
Submitted 1 April, 2020; v1 submitted 31 March, 2020;
originally announced March 2020.
-
Two floating camphor particles interacting through lateral capillary force
Authors:
Yuhei Hirose,
Yusuke Yasugahira,
Mamoru Okamoto,
Yuki Koyano,
Hiroyuki Kitahata,
Masaharu Nagayama,
Yutaka Sumino
Abstract:
We consider a mathematical model for a two-particle system driven by the spatial gradient of a concentration field of chemicals with conservative attractive interactions in one dimension. This setup corresponds to an experimental system with floating camphor particles at a water surface. Repulsive interaction is introduced, as well as self-propelling force, through the concentration field of camph…
▽ More
We consider a mathematical model for a two-particle system driven by the spatial gradient of a concentration field of chemicals with conservative attractive interactions in one dimension. This setup corresponds to an experimental system with floating camphor particles at a water surface. Repulsive interaction is introduced, as well as self-propelling force, through the concentration field of camphor molecules at the water surface. Here we newly adopt the attractive lateral capillary force due to the deformation of the water surface. The particles experience competing dissipative repulsion and conservative attraction. We numerically investigated the mathematical model, and found six different modes of motion. The theoretical approach revealed that some of such mode transitions can be understood in terms of bifurcation.
△ Less
Submitted 16 March, 2020; v1 submitted 2 September, 2019;
originally announced September 2019.
-
Relationship between the size of camphor-driven rotor and its angular velocity
Authors:
Yuki Koyano,
Marian Gryciuk,
Paulina Skrobanska,
Maciej Malecki,
Yutaka Sumino,
Hiroyuki Kitahata,
Jerzy Gorecki
Abstract:
We consider a rotor made of two camphor disks glued below the ends of a plastic stripe. The disks are floating on a water surface and the plastic stripe does not touch the surface. The system can rotate around a vertical axis located at the center of the stripe. The disks dissipate camphor molecules. The driving momentum comes from the nonuniformity of surface tension resulting from inhomogeneous…
▽ More
We consider a rotor made of two camphor disks glued below the ends of a plastic stripe. The disks are floating on a water surface and the plastic stripe does not touch the surface. The system can rotate around a vertical axis located at the center of the stripe. The disks dissipate camphor molecules. The driving momentum comes from the nonuniformity of surface tension resulting from inhomogeneous surface concentration of camphor molecules around the disks. We investigate the stationary angular velocity as a function of rotor radius $\ell$. For large $\ell$ the angular velocity decreases for increasing $\ell$. At a specific value of $\ell$ the angular velocity reaches its maximum and, for short $\ell$ it rapidly decreases. Such behaviour is confirmed by a simple numerical model. The model also predicts that there is a critical rotor size below which it does not rotate. Within the introduced model we analyze the type of this bifurcation.
△ Less
Submitted 1 August, 2017; v1 submitted 3 April, 2017;
originally announced April 2017.
-
Pattern of confined chemical garden controlled by injection speed
Authors:
Shu Wagatsuma,
Takuro Higashi,
Ayumi Achiwa,
Yutaka Sumino
Abstract:
Pattern of confined chemical garden was controlled by the speed of injected fluid, and their mechanism is discussed. A confined chemical garden system was constructed where an aqueous solution of cobalt chloride was injected into a cell filled with sodium silicate solution. The reaction of these two solutions resulted in the formation of precipitation. The viscosities of the prepared aqueous solut…
▽ More
Pattern of confined chemical garden was controlled by the speed of injected fluid, and their mechanism is discussed. A confined chemical garden system was constructed where an aqueous solution of cobalt chloride was injected into a cell filled with sodium silicate solution. The reaction of these two solutions resulted in the formation of precipitation. The viscosities of the prepared aqueous solutions were set to be similar in order to rule out the possibility of Saffman-Taylor instability. The injection front showed three distinctive patterns: algaes, shells, and filaments, which were dependent on injection speed. The injection pressure and the spatio-temporal pattern of the injected fluid were measured, and a significant increase in the injection pressure was observed when the filament pattern appeared, which indicated the existence of thin lubrication layer between the precipitation and the substrate. The filament pattern was further analyzed quantitatively, and the number of active filaments was determined to be proportional to the injection speed. A mathematical model was constructed that considered both the viscous effect from the thin luburiation layer and the Laplace pressure. This model successfully reproduced the characteristic filament dynamics.
△ Less
Submitted 6 May, 2017; v1 submitted 9 December, 2016;
originally announced December 2016.
-
Rotational motion of a droplet induced by interfacial tension
Authors:
Ken H. Nagai,
Fumi Takabatake,
Yutaka Sumino,
Hiroyuki Kitahta,
Masatoshi Ichikawa,
Natsuhiko Yoshinaga
Abstract:
Spontaneous rotation of a droplet induced by the Marangoni flow is analyzed in a two-dimensional system. The droplet with the small particle which supplies a surfactant at the interface is considered. We calculated flow field around the droplet using Stokes equation and found that advective nonlinearity breaks symmetry for rotation. Theoretical calculation indicates that the droplet spontaneously…
▽ More
Spontaneous rotation of a droplet induced by the Marangoni flow is analyzed in a two-dimensional system. The droplet with the small particle which supplies a surfactant at the interface is considered. We calculated flow field around the droplet using Stokes equation and found that advective nonlinearity breaks symmetry for rotation. Theoretical calculation indicates that the droplet spontaneously rotates when the radius of the droplet is an appropriate size. The theoretical results were validated through comparison with the experiments.
△ Less
Submitted 10 January, 2013;
originally announced January 2013.
-
Chemo-Sensitive Running Droplet
Authors:
Yutaka Sumino,
Masaharu Nagayama,
Hiroyuki Kitahata,
Shin-ichiro M. Nomura,
Nobuyuki Magome,
Yoshihito Mori,
Kenichi Yoshikawa
Abstract:
Chemical control of the spontaneous motion of a reactive oil droplet moving on a glass substrate under an aqueous phase is reported. Experimental results show that the self-motion of an oil droplet is confined on an acid-treated glass surface. The transient behavior of oil-droplet motion is also observed with a high-speed video camera. A mathematical model that incorporates the effect of the gla…
▽ More
Chemical control of the spontaneous motion of a reactive oil droplet moving on a glass substrate under an aqueous phase is reported. Experimental results show that the self-motion of an oil droplet is confined on an acid-treated glass surface. The transient behavior of oil-droplet motion is also observed with a high-speed video camera. A mathematical model that incorporates the effect of the glass surface charge is built based on the experimental observation of oil-droplet motion. A numerical simulation of this mathematical model reproduced the essential features concerning confinement within a certain chemical territory of oil-droplet motion, and also its transient behavior. Our results may shed light on physical aspects of reactive spreading and a chemotaxis in living things.
△ Less
Submitted 23 August, 2005; v1 submitted 2 May, 2005;
originally announced May 2005.
-
Mode Selection in the Spontaneous Motion of an Alcohol Droplet
Authors:
Ken Nagai,
Yutaka Sumino,
Hiroyuki Kitahata,
Kenichi Yoshikawa
Abstract:
An alcohol (pentanol) droplet exhibits spontaneous agitation on an aqueous solution, driven by a solutal Marangoni effect. We found that the droplet's mode of motion is controlled by its volume. A droplet with a volume of less than $0.1 μ\rm{l}$ shows irregular translational motion, whereas intermediate-sized droplets of $0.1-200 μ\rm{l}$ show vectorial motion. When the volume is above…
▽ More
An alcohol (pentanol) droplet exhibits spontaneous agitation on an aqueous solution, driven by a solutal Marangoni effect. We found that the droplet's mode of motion is controlled by its volume. A droplet with a volume of less than $0.1 μ\rm{l}$ shows irregular translational motion, whereas intermediate-sized droplets of $0.1-200 μ\rm{l}$ show vectorial motion. When the volume is above $300 μ\rm{l}$, the droplet splits into smaller drops. These experimental results regarding mode selection are interpreted in terms of the wave number selection depending on the droplet volume.
△ Less
Submitted 21 April, 2005; v1 submitted 21 February, 2005;
originally announced February 2005.
-
Self Running Droplet: Emergence of Regular Motion from Nonequilibrium Noise
Authors:
Yutaka Sumino,
Nobuyuki Magome,
Tsutomu Hamada,
Kenichi Yoshikawa
Abstract:
Spontaneous motion of an oil droplet driven by chemical nonequilibricity is reported. It is shown that the droplet undergoes regular rhythmic motion under appropriately designed boundary conditions, whereas it exhibits random motion in an isotropic environment. This study is a novel manifestation on the direct energy transformation of chemical energy into regular spatial-motion under isothermal…
▽ More
Spontaneous motion of an oil droplet driven by chemical nonequilibricity is reported. It is shown that the droplet undergoes regular rhythmic motion under appropriately designed boundary conditions, whereas it exhibits random motion in an isotropic environment. This study is a novel manifestation on the direct energy transformation of chemical energy into regular spatial-motion under isothermal conditions. A simple mathematical equation including noise reproduces the essential feature of the transition from irregularity into periodic regular motion. Our results will inspire the theoretical study on the mechanism of molecular motors in living matter, working under significant influence of thermal fluctuation.
△ Less
Submitted 6 May, 2005; v1 submitted 9 June, 2004;
originally announced June 2004.
