-
Buckling and post-buckling of cylindrical shells under combined torsional and axial loads
Authors:
Lu Lu,
Sophie Leanza,
Yang Liu,
Ruike Renee Zhao
Abstract:
The buckling behavior of cylindrical shells has gained significant interest over the past century due to its rich nonlinear behavior and broad engineering applications. While the buckling of cylindrical shells under a single load (e.g., compression or torsion) has been extensively studied, the buckling behavior under combined torsional and axial loads remains largely unexplored. In this paper, bas…
▽ More
The buckling behavior of cylindrical shells has gained significant interest over the past century due to its rich nonlinear behavior and broad engineering applications. While the buckling of cylindrical shells under a single load (e.g., compression or torsion) has been extensively studied, the buckling behavior under combined torsional and axial loads remains largely unexplored. In this paper, based on a combination of experiments, theoretical modeling, and finite element simulations, we systematically investigate the buckling and post-buckling behavior of cylindrical shells under combined torsional and axial loads. Three different types of combined loads are considered: compression with pre-torsion, torsion with pre-tension, and torsion with pre-compression. The theoretical model is established within the framework of the Donnell shell theory and solved using the Galerkin method, through which the critical buckling load, critical circumferential wavenumber, buckling pattern, and post-buckling equilibrium path of clamped-clamped thin cylindrical shells under various types of loads can be determined. The theoretical predictions agree well with finite element simulations and qualitatively capture the various buckling phenomena observed in the experiments. It is found that cylindrical shells exhibit quite different post-buckling behavior under combined loads compared to under a single compressive or torsional load. For instance, when a clamped-clamped thin cylindrical shell is subjected to pure torsion or torsion with a relatively small pre-compression, it consistently shows a diagonal-shaped pattern during deformation. However, with a relatively large pre-compression, the shell transitions from a diagonal-shaped pattern to a twisted diamond-shaped pattern.
△ Less
Submitted 30 March, 2025; v1 submitted 21 January, 2025;
originally announced January 2025.
-
Tunable band gaps of axially moving belt on periodic elastic foundation
Authors:
Lei Lu
Abstract:
The present paper investigates the band structure of an axially moving belt resting on a foundation with periodically varying stiffness. It is concluded that the band gaps appear when the divergence of the eigenvalue occurs and the veering phenomenon of mode shape begins. The bifurcation of eigenvalues and mode shape veering lead to wave attenuation. Hence, the boundary stiffness modulation can be…
▽ More
The present paper investigates the band structure of an axially moving belt resting on a foundation with periodically varying stiffness. It is concluded that the band gaps appear when the divergence of the eigenvalue occurs and the veering phenomenon of mode shape begins. The bifurcation of eigenvalues and mode shape veering lead to wave attenuation. Hence, the boundary stiffness modulation can be designed to manipulate the band gap where the vibration is suppressed. The contribution of the system parameters to the band gaps has been obtained by applying the method of varying amplitudes. By tuning the stiffness, the desired band gap can be obtained and the vibration for specific parameters can be suppressed. The current study provides a technique to avoid vibration transmission of the axially moving material by designing the foundation stiffness.
△ Less
Submitted 1 August, 2021;
originally announced August 2021.
-
A scheme for simulating multi-level phase change photonics materials
Authors:
Yunzheng Wang,
Jing Ning,
Li Lu,
Michel Bosman,
Robert E. Simpson
Abstract:
Chalcogenide phase change materials (PCMs) have been extensively applied in data storage, and they are now being proposed for high resolution displays, holographic displays, reprogrammable photonics, and all-optical neural networks. These wide-ranging applications all exploit the radical property contrast between the PCMs different structural phases, extremely fast switching speed, long-term stabi…
▽ More
Chalcogenide phase change materials (PCMs) have been extensively applied in data storage, and they are now being proposed for high resolution displays, holographic displays, reprogrammable photonics, and all-optical neural networks. These wide-ranging applications all exploit the radical property contrast between the PCMs different structural phases, extremely fast switching speed, long-term stability, and low energy consumption. Designing PCM photonic devices requires an accurate model to predict the response of the device during phase transitions. Here, we describe an approach that accurately predicts the microstructure and optical response of phase change materials during laser induced heating. The framework couples the Gillespie Cellular Automata approach for modelling phase transitions with effective medium theory and Fresnel equations. The accuracy of the approach is verified by comparing the PCM optical response and microstructure evolution with the results of nanosecond laser switching experiments. We anticipate that this approach to simulating the switching response of PCMs will become an important component for designing and simulating programmable photonics devices. The method is particularly important for predicting the multi-level optical response of PCMs, which is important for all-optical neural networks and PCM-programmable perceptrons.
△ Less
Submitted 5 July, 2021;
originally announced July 2021.
-
Generalization of elementary cellular automata to a higher dimension family including the BML traffic model
Authors:
Daniel Lawrence Lu
Abstract:
A general family of $D$-dimensional, $K$-state cellular automata is proposed where the update rule is sequentially applied in each dimension. This includes the Biham--Middleton--Levine traffic model, which is a 2D cellular automaton with 3 states. Using computer simulations, we discover new properties of intermediate states for the BML model. We present some new 2D, 3-state cellular automata belon…
▽ More
A general family of $D$-dimensional, $K$-state cellular automata is proposed where the update rule is sequentially applied in each dimension. This includes the Biham--Middleton--Levine traffic model, which is a 2D cellular automaton with 3 states. Using computer simulations, we discover new properties of intermediate states for the BML model. We present some new 2D, 3-state cellular automata belonging to this family with application to percolation, annealing, biological membranes, and more. Many of these models exhibit sharp phase transitions, self organization, and interesting patterns.
△ Less
Submitted 4 January, 2015;
originally announced January 2015.
-
Reconstructing directed networks for better synchronization
Authors:
An Zeng,
Linyuan Lü,
Tao Zhou
Abstract:
In this paper, we studied the strategies to enhance synchronization on directed networks by manipulating a fixed number of links. We proposed a centrality-based reconstructing (CBR) method, where the node centrality is measured by the well-known PageRank algorithm. Extensive numerical simulation on many modeled networks demonstrated that the CBR method is more effective in facilitating synchroniza…
▽ More
In this paper, we studied the strategies to enhance synchronization on directed networks by manipulating a fixed number of links. We proposed a centrality-based reconstructing (CBR) method, where the node centrality is measured by the well-known PageRank algorithm. Extensive numerical simulation on many modeled networks demonstrated that the CBR method is more effective in facilitating synchronization than the degree-based reconstructing method and random reconstructing method for adding or removing links. The reason is that CBR method can effectively narrow the incoming degree distribution and reinforce the hierarchical structure of the network. Furthermore, we apply the CBR method to links rewiring procedure where at each step one link is removed and one new link is added. The CBR method helps to decide which links should be removed or added. After several steps, the resulted networks are very close to the optimal structure from the evolutionary optimization algorithm. The numerical simulations on the Kuramoto model further demonstrate that our method has advantage in shortening the convergence time to synchronization on directed networks.
△ Less
Submitted 29 June, 2011;
originally announced June 2011.
