-
On the robustness of Dirichlet-Neumann coupling schemes for fluid-structure-interaction problems with nearly-closed fluid domains
Authors:
A. Aissa-Berraies,
Ferdinando A. Auricchio,
Gertjan van Zwieten,
E. Harald van Brummelen
Abstract:
Partitioned methods for fluid-structure interaction (FSI) involve solving the structural and flow problems sequentially. These methods allow for separate settings for the fluid and solid subsystems and thus modularity, enabling reuse of advanced commercial and open-source software. Most partitioned FSI schemes apply a Dirichlet-Neumann (DN) split of the interface conditions. The DN scheme is adequ…
▽ More
Partitioned methods for fluid-structure interaction (FSI) involve solving the structural and flow problems sequentially. These methods allow for separate settings for the fluid and solid subsystems and thus modularity, enabling reuse of advanced commercial and open-source software. Most partitioned FSI schemes apply a Dirichlet-Neumann (DN) split of the interface conditions. The DN scheme is adequate in a wide range of applications, but it is sensitive to the added-mass effect, and it is susceptible to the incompressibility dilemma, i.e. it completely fails for FSI problems with an incompressible fluid furnished with Dirichlet boundary conditions on the part of its boundary complementary to the interface. In this paper, we show that if the fluid is incompressible and the fluid domain is nearly-closed, i.e. it carries Dirichlet conditions except for a permeable part of the boundary carrying a Robin condition, then the DN partitioned approach is sensitive to the flow resistance at the permeable part, and convergence of the partitioned approach deteriorates as the flow resistance increases. The DN scheme then becomes unstable in the limit as the flow resistance passes to infinity. Based on a simple model problem, we show that in the nearly-closed case, the convergence rate of the DN partitioned method depends on a so-called added-damping effect. The analysis gives insights that can aid to improve robustness and efficiency of partitioned method for FSI problems with contact, e.g. valve applications. In addition, the results elucidate the incompressibility dilemma as a limit of the added-damping effect passing to infinity, and the corresponding challenges related to FSI problems with nearly closed fluid-domain configurations. Via numerical experiments, we consider the generalization of the results of the simple model problem to more complex nearly-closed FSI problems.
△ Less
Submitted 4 June, 2025;
originally announced June 2025.
-
A Robust and Accurate Adaptive Approximation Method for a Diffuse-Interface Model of Binary-Fluid Flows
Authors:
T. H. B. Demont,
G. J. van Zwieten,
C. Diddens,
E. H. van Brummelen
Abstract:
We present an adaptive simulation framework for binary-fluid flows, based on the Abels-Garcke-Grün Navier-Stokes-Cahn-Hilliard (AGG NSCH) diffuse-interface model. The adaptive-refinement procedure is guided by a two-level hierarchical a-posteriori error estimate, and it effectively resolves the spatial multiscale behavior of the diffuse-interface model. To improve the robustness of the solution pr…
▽ More
We present an adaptive simulation framework for binary-fluid flows, based on the Abels-Garcke-Grün Navier-Stokes-Cahn-Hilliard (AGG NSCH) diffuse-interface model. The adaptive-refinement procedure is guided by a two-level hierarchical a-posteriori error estimate, and it effectively resolves the spatial multiscale behavior of the diffuse-interface model. To improve the robustness of the solution procedure and avoid severe time-step restrictions for small-interface thicknesses, we introduce an $\varepsilon$-continuation procedure, in which the diffuse interface thickness ($\varepsilon$) are enlarged on coarse meshes, and the mobility is scaled accordingly. To further accelerate the computations and improve robustness, we apply a modified Backward Euler scheme in the initial stages of the adaptive-refinement procedure in each time step, and a Crank--Nicolson scheme in the final stages of the refinement procedure. To enhance the robustness of the nonlinear solution procedure, we introduce a partitioned solution procedure for the linear tangent problems in Newton's method, based on a decomposition of the NSCH system into its NS and CH subsystems. We conduct a systematic investigation of the conditioning of the monolithic NSCH tangent matrix and of its NS and CH subsystems for a representative 2D model problem. To illustrate the properties of the presented adaptive simulation framework, we present numerical results for a 2D oscillating water droplet suspended in air, and we validate the obtained results versus those of a corresponding sharp-interface model.
△ Less
Submitted 23 March, 2022;
originally announced March 2022.
-
Worst-case multi-objective error estimation and adaptivity
Authors:
E. H. van Brummelen,
S. Zhuk,
G. J. van Zwieten
Abstract:
This paper introduces a new computational methodology for determining a-posteriori multi-objective error estimates for finite-element approximations, and for constructing corresponding (quasi-)optimal adaptive refinements of finite-element spaces. As opposed to the classical goal-oriented approaches, which consider only a single objective functional, the presented methodology applies to general cl…
▽ More
This paper introduces a new computational methodology for determining a-posteriori multi-objective error estimates for finite-element approximations, and for constructing corresponding (quasi-)optimal adaptive refinements of finite-element spaces. As opposed to the classical goal-oriented approaches, which consider only a single objective functional, the presented methodology applies to general closed convex subsets of the dual space and constructs a worst-case error estimate of the finite-element approximation error. This worst-case multi-objective error estimate conforms to a dual-weighted residual, in which the dual solution is associated with an approximate supporting functional of the objective set at the approximation error. We regard both standard approximation errors and data-incompatibility errors associated with incompatibility of boundary data with the trace of the finite-element space. Numerical experiments are presented to demonstrate the efficacy of applying the proposed worst-case multi-objective error in adaptive refinement procedures.
△ Less
Submitted 15 April, 2016;
originally announced April 2016.
-
Condition number analysis and preconditioning of the finite cell method
Authors:
F. de Prenter,
C. V. Verhoosel,
G. J. van Zwieten,
E. H. van Brummelen
Abstract:
The (Isogeometric) Finite Cell Method - in which a domain is immersed in a structured background mesh - suffers from conditioning problems when cells with small volume fractions occur. In this contribution, we establish a rigorous scaling relation between the condition number of (I)FCM system matrices and the smallest cell volume fraction. Ill-conditioning stems either from basis functions being s…
▽ More
The (Isogeometric) Finite Cell Method - in which a domain is immersed in a structured background mesh - suffers from conditioning problems when cells with small volume fractions occur. In this contribution, we establish a rigorous scaling relation between the condition number of (I)FCM system matrices and the smallest cell volume fraction. Ill-conditioning stems either from basis functions being small on cells with small volume fractions, or from basis functions being nearly linearly dependent on such cells. Based on these two sources of ill-conditioning, an algebraic preconditioning technique is developed, which is referred to as Symmetric Incomplete Permuted Inverse Cholesky (SIPIC). A detailed numerical investigation of the effectivity of the SIPIC preconditioner in improving (I)FCM condition numbers and in improving the convergence speed and accuracy of iterative solvers is presented for the Poisson problem and for two- and three-dimensional problems in linear elasticity, in which Nitche's method is applied in either the normal or tangential direction. The accuracy of the preconditioned iterative solver enables mesh convergence studies of the finite cell method.
△ Less
Submitted 25 February, 2016; v1 submitted 19 January, 2016;
originally announced January 2016.
-
Elasto-capillarity Simulations based on the Navier-Stokes-Cahn-Hilliard Equations
Authors:
E. H. van Brummelen,
M. Shokrpour-Roudbari,
G. J. van Zwieten
Abstract:
We consider a computational model for complex-fluid-solid interaction based on a diffuse-interface model for the complex fluid and a hyperelastic-material model for the solid. The diffuse-interface complex-fluid model is described by the incompressible Navier-Stokes-Cahn-Hilliard equations with preferential-wetting boundary conditions at the fluid-solid interface. The corresponding fluid traction…
▽ More
We consider a computational model for complex-fluid-solid interaction based on a diffuse-interface model for the complex fluid and a hyperelastic-material model for the solid. The diffuse-interface complex-fluid model is described by the incompressible Navier-Stokes-Cahn-Hilliard equations with preferential-wetting boundary conditions at the fluid-solid interface. The corresponding fluid traction on the interface includes a capillary-stress contribution, and the dynamic interface condition comprises the traction exerted by the non-uniform fluid-solid surface tension. We present a weak formulation of the aggregated complex-fluid-solid-interaction problem, based on an Arbitrary-Lagrangian-Eulerian formulation of the Navier-Stokes-Cahn-Hilliard equations and a proper reformulation of the complex-fluid traction and the fluid-solid surface tension. To validate the presented complex-fluid-solid-interaction model, we present numerical results and conduct a comparison to experimental data for a droplet on a soft substrate.
△ Less
Submitted 8 October, 2015;
originally announced October 2015.
-
Discontinuities without discontinuity: The Weakly-enforced Slip Method
Authors:
G. J. van Zwieten,
E. H. van Brummelen,
K. G. van der Zee,
M. A. Gutiérrez,
R. F. Hanssen
Abstract:
Tectonic faults are commonly modelled as Volterra or Somigliana dislocations in an elastic medium. Various solution methods exist for this problem. However, the methods used in practice are often limiting, motivated by reasons of computational efficiency rather than geophysical accuracy. A typical geophysical application involves inverse problems for which many different fault configurations need…
▽ More
Tectonic faults are commonly modelled as Volterra or Somigliana dislocations in an elastic medium. Various solution methods exist for this problem. However, the methods used in practice are often limiting, motivated by reasons of computational efficiency rather than geophysical accuracy. A typical geophysical application involves inverse problems for which many different fault configurations need to be examined, each adding to the computational load. In practice, this precludes conventional finite-element methods, which suffer a large computational overhead on account of geometric changes. This paper presents a new non-conforming finite-element method based on weak imposition of the displacement discontinuity. The weak imposition of the discontinuity enables the application of approximation spaces that are independent of the dislocation geometry, thus enabling optimal reuse of computational components. Such reuse of computational components renders finite-element modeling a viable option for inverse problems in geophysical applications. A detailed analysis of the approximation properties of the new formulation is provided. The analysis is supported by numerical experiments in 2D and 3D.
△ Less
Submitted 29 April, 2013;
originally announced April 2013.
