-
Fatigue design load calculations of the offshore NREL 5MW benchmark turbine using quadrature rule techniques
Authors:
L. M. M. van den Bos,
W. A. A. M. Bierbooms,
A. Alexandre,
B. Sanderse,
G. J. W. van Bussel
Abstract:
A novel approach is proposed to reduce, compared to the conventional binning approach, the large number of aeroelastic code evaluations that are necessary to obtain equivalent loads acting on wind turbines. These loads describe the effect of long-term environmental variability on the fatigue loads of a horizontal-axis wind turbine. In particular Design Load Case 1.2, as standardized by IEC, is con…
▽ More
A novel approach is proposed to reduce, compared to the conventional binning approach, the large number of aeroelastic code evaluations that are necessary to obtain equivalent loads acting on wind turbines. These loads describe the effect of long-term environmental variability on the fatigue loads of a horizontal-axis wind turbine. In particular Design Load Case 1.2, as standardized by IEC, is considered. The approach is based on numerical integration techniques and, more specifically, quadrature rules. The quadrature rule used in this work is a recently proposed "implicit" quadrature rule, which has the main advantage that it can be constructed directly using measurements of the environment. It is demonstrated that the proposed approach yields accurate estimations of the equivalent loads using a significantly reduced number of aeroelastic model evaluations (compared to binning). Moreover the error introduced by the seeds (introduced by averaging over random wind fields and sea states) is incorporated in the quadrature framework, yielding an even further reduction in the number of aeroelastic code evaluations. The reduction in computational time is demonstrated by assessing the fatigue loads on the NREL 5MW reference offshore wind turbine in conjunction with measurement data obtained at the North Sea, both for a simplified and a full load case.
△ Less
Submitted 11 April, 2019;
originally announced April 2019.
-
Generating nested quadrature rules with positive weights based on arbitrary sample sets
Authors:
L. M. M. van den Bos,
B. Sanderse,
W. A. A. M. Bierbooms,
G. J. W. van Bussel
Abstract:
For the purpose of uncertainty propagation a new quadrature rule technique is proposed that has positive weights, has high degree, and is constructed using only samples that describe the probability distribution of the uncertain parameters. Moreover, nodes can be added to the quadrature rule, resulting into a sequence of nested rules. The rule is constructed by iterating over the samples of the di…
▽ More
For the purpose of uncertainty propagation a new quadrature rule technique is proposed that has positive weights, has high degree, and is constructed using only samples that describe the probability distribution of the uncertain parameters. Moreover, nodes can be added to the quadrature rule, resulting into a sequence of nested rules. The rule is constructed by iterating over the samples of the distribution and exploiting the null space of the Vandermonde-system that describes the nodes and weights, in order to select which samples will be used as nodes in the quadrature rule. The main novelty of the quadrature rule is that it can be constructed using any number of dimensions, using any basis, in any space, and using any distribution. It is demonstrated both theoretically and numerically that the rule always has positive weights and therefore has high convergence rates for sufficiently smooth functions. The convergence properties are demonstrated by approximating the integral of the Genz test functions. The applicability of the quadrature rule to complex uncertainty propagation cases is demonstrated by determining the statistics of the flow over an airfoil governed by the Euler equations, including the case of dependent uncertain input parameters. The new quadrature rule significantly outperforms classical sparse grid methods.
△ Less
Submitted 17 July, 2019; v1 submitted 26 September, 2018;
originally announced September 2018.
-
Bayesian model calibration with interpolating polynomials based on adaptively weighted Leja nodes
Authors:
L. M. M. van den Bos,
B. Sanderse,
W. A. A. M. Bierbooms,
G. J. W. van Bussel
Abstract:
An efficient algorithm is proposed for Bayesian model calibration, which is commonly used to estimate the model parameters of non-linear, computationally expensive models using measurement data. The approach is based on Bayesian statistics: using a prior distribution and a likelihood, the posterior distribution is obtained through application of Bayes' law. Our novel algorithm to accurately determ…
▽ More
An efficient algorithm is proposed for Bayesian model calibration, which is commonly used to estimate the model parameters of non-linear, computationally expensive models using measurement data. The approach is based on Bayesian statistics: using a prior distribution and a likelihood, the posterior distribution is obtained through application of Bayes' law. Our novel algorithm to accurately determine this posterior requires significantly fewer discrete model evaluations than traditional Monte Carlo methods. The key idea is to replace the expensive model by an interpolating surrogate model and to construct the interpolating nodal set maximizing the accuracy of the posterior. To determine such a nodal set an extension to weighted Leja nodes is introduced, based on a new weighting function. We prove that the convergence of the posterior has the same rate as the convergence of the model. If the convergence of the posterior is measured in the Kullback-Leibler divergence, the rate doubles. The algorithm and its theoretical properties are verified in three different test cases: analytical cases that confirm the correctness of the theoretical findings, Burgers' equation to show its applicability in implicit problems, and finally the calibration of the closure parameters of a turbulence model to show the effectiveness for computationally expensive problems.
△ Less
Submitted 17 July, 2019; v1 submitted 6 February, 2018;
originally announced February 2018.
-
A hybrid Eulerian-Lagrangian flow solver
Authors:
Artur Palha,
Lento Manickathan,
Carlos Simao Ferreira,
Gerard van Bussel
Abstract:
Currently, Eulerian flow solvers are very efficient in accurately resolving flow structures near solid boundaries. On the other hand, they tend to be diffusive and to dampen high-intensity vortical structures after a short distance away from solid boundaries. The use of high order methods and fine grids, although alleviating this problem, gives rise to large systems of equations that are expensive…
▽ More
Currently, Eulerian flow solvers are very efficient in accurately resolving flow structures near solid boundaries. On the other hand, they tend to be diffusive and to dampen high-intensity vortical structures after a short distance away from solid boundaries. The use of high order methods and fine grids, although alleviating this problem, gives rise to large systems of equations that are expensive to solve.
Lagrangian solvers, as the regularized vortex particle method, have shown to eliminate (in practice) the diffusion in the wake. As a drawback, the modelling of solid boundaries is less accurate, more complex and costly than with Eulerian solvers (due to the isotropy of its computational elements).
Given the drawbacks and advantages of both Eulerian and Lagrangian solvers the combination of both methods, giving rise to a hybrid solver, is advantageous. The main idea behind the hybrid solver presented is the following. In a region close to solid boundaries the flow is solved with an Eulerian solver, where the full Navier-Stokes equations are solved (possibly with an arbitrary turbulence model or DNS, the limitations being the computational power and the physical properties of the flow), outside of that region the flow is solved with a vortex particle method.
In this work we present this hybrid scheme and verify it numerically on known 2D benchmark cases: dipole flow, flow around a cylinder and flow around a stalled airfoil. The success in modelling these flow conditions presents this hybrid approach as a promising alternative, bridging the gap between highly resolved and computationally intensive Eulerian CFD simulations and fast but less resolved Lagrangian simulations.
△ Less
Submitted 4 June, 2015; v1 submitted 13 May, 2015;
originally announced May 2015.
