-
On the principle of linearized stability for quasilinear evolution equations in time-weighted spaces
Authors:
Bogdan-Vasile Matioc,
Lina Sophie Schmitz,
Christoph Walker
Abstract:
Quasilinear (and semilinear) parabolic problems of the form $v'=A(v)v+f(v)$ with strict inclusion $\mathrm{dom}(f)\subsetneq \mathrm{dom}(A)$ of the domains of the function $v\mapsto f(v)$ and the quasilinear part $v\mapsto A(v)$ are considered in the framework of time-weighted function spaces. This allows one to establish the principle of linearized stability in intermediate spaces lying between…
▽ More
Quasilinear (and semilinear) parabolic problems of the form $v'=A(v)v+f(v)$ with strict inclusion $\mathrm{dom}(f)\subsetneq \mathrm{dom}(A)$ of the domains of the function $v\mapsto f(v)$ and the quasilinear part $v\mapsto A(v)$ are considered in the framework of time-weighted function spaces. This allows one to establish the principle of linearized stability in intermediate spaces lying between $\mathrm{dom}(f)$ and $\mathrm{dom}(A)$ and yields a greater flexibility with respect to the phase space for the evolution. In applications to differential equations such intermediate spaces may correspond to critical spaces exhibiting a scaling invariance. Several examples are provided to demonstrate the applicability of the results.
△ Less
Submitted 18 December, 2024;
originally announced December 2024.
-
Stationary Soap Film Bridge Subjected to an Electrostatic Force: The Balanced Case
Authors:
Lina Sophie Schmitz
Abstract:
We analytically study a stationary free boundary problem describing a soap film bridge subjected to an electrostatic force. Starting from a cylinder that the soap film forms if its surface tension and the electrostatic force are perfectly balanced, we construct a local branch of stationary solutions. Then, we prove that there is a sharp threshold value for a characteristic model parameter at which…
▽ More
We analytically study a stationary free boundary problem describing a soap film bridge subjected to an electrostatic force. Starting from a cylinder that the soap film forms if its surface tension and the electrostatic force are perfectly balanced, we construct a local branch of stationary solutions. Then, we prove that there is a sharp threshold value for a characteristic model parameter at which the stability behaviour of this branch switches from stable to unstable. Finally, we show that the soap film deflects monotonically outwards if the strength of the electrostatic force is increased. Besides rigorous results, we also discuss a possible balancing effect of the electrostatic force.
△ Less
Submitted 27 September, 2024;
originally announced September 2024.
-
Stationary Soap Film Bridge Formed by a Small Electrostatic Force
Authors:
Lina Sophie Schmitz
Abstract:
We consider two models, a free boundary problem and a simplification thereof, which describe a soap film bridge subjected to an electrostatic force. For both models, we construct stationary solutions if the force is small, analyse their stability and examine how their shape is influenced by small changes in the strength of the force.
We consider two models, a free boundary problem and a simplification thereof, which describe a soap film bridge subjected to an electrostatic force. For both models, we construct stationary solutions if the force is small, analyse their stability and examine how their shape is influenced by small changes in the strength of the force.
△ Less
Submitted 27 September, 2024;
originally announced September 2024.
-
Dynamical Behaviour of a Soap Film Bridge Driven by an Electrostatic Force
Authors:
Lina Sophie Schmitz
Abstract:
We study a free boundary problem describing a tubular soap film bridge driven by an electrostatic force. To realize the electrostatic force, the soap film bridge is placed inside an outer metal cylinder and a voltage difference between this cylinder and the soap film is applied. Our model consists of a quasilinear parabolic equation for the evolution of the film coupled with an elliptic equation f…
▽ More
We study a free boundary problem describing a tubular soap film bridge driven by an electrostatic force. To realize the electrostatic force, the soap film bridge is placed inside an outer metal cylinder and a voltage difference between this cylinder and the soap film is applied. Our model consists of a quasilinear parabolic equation for the evolution of the film coupled with an elliptic equation for the electrostatic potential in the unknown domain between outer cylinder and soap film bridge. For the rotationally symmetric case, we prove local well-posedness of this free boundary problem by recasting it as a single quasilinear parabolic equation with a non-local source term. Moreover, for large applied voltages, we show that solutions do not exist globally for a wide class of initial values.
△ Less
Submitted 10 August, 2024;
originally announced August 2024.
-
Recovering Initial States in Semilinear Parabolic Problems from Time-Averages
Authors:
Lina Sophie Schmitz,
Christoph Walker
Abstract:
Well-posedness of certain semilinear parabolic problems with nonlocal initial conditions is shown in time-weighted spaces. The result is applied to recover the initial states in semilinear parabolic problems with nonlinearities of superlinear behavior near zero from small time-averages over arbitrary time periods.
Well-posedness of certain semilinear parabolic problems with nonlocal initial conditions is shown in time-weighted spaces. The result is applied to recover the initial states in semilinear parabolic problems with nonlinearities of superlinear behavior near zero from small time-averages over arbitrary time periods.
△ Less
Submitted 4 July, 2024;
originally announced July 2024.
-
Robust transshipment problem under consistent flow constraints
Authors:
Christina Büsing,
Arie M. C. A Koster,
Sabrina Schmitz
Abstract:
In this paper, we study robust transshipment under consistent flow constraints. We consider demand uncertainty represented by a finite set of scenarios and characterize a subset of arcs as so-called fixed arcs. In each scenario, we require an integral flow that satisfies the respective flow balance constraints. In addition, on each fixed arc, we require equal flow for all scenarios. The objective…
▽ More
In this paper, we study robust transshipment under consistent flow constraints. We consider demand uncertainty represented by a finite set of scenarios and characterize a subset of arcs as so-called fixed arcs. In each scenario, we require an integral flow that satisfies the respective flow balance constraints. In addition, on each fixed arc, we require equal flow for all scenarios. The objective is to minimize the maximum cost occurring among all scenarios. We show that the problem is strongly NP-hard on acyclic digraphs by a reduction from the $(3,B2)$-SAT problem. Furthermore, we prove that the problem is weakly NP-hard on series-parallel digraphs by a reduction from a special case of the \textsc{Partition} problem. If in addition the number of scenarios is constant, we observe the pseudo-polynomial-time solvability of the problem. We provide polynomial-time algorithms for three special cases on series-parallel digraphs. Finally, we present a polynomial-time algorithm for pearl digraphs.
△ Less
Submitted 29 August, 2022;
originally announced August 2022.
-
On the Computation of the Zariski Closure of Finitely Generated Groups of Matrices
Authors:
Klara Nosan,
Amaury Pouly,
Sylvain Schmitz,
Mahsa Shirmohammadi,
James Worrell
Abstract:
We investigate the complexity of computing the Zariski closure of a finitely generated group of matrices. The Zariski closure was previously shown to be computable by Derksen, Jeandel, and Koiran, but the termination argument for their algorithm appears not to yield any complexity bound. In this paper we follow a different approach and obtain a bound on the degree of the polynomials that define th…
▽ More
We investigate the complexity of computing the Zariski closure of a finitely generated group of matrices. The Zariski closure was previously shown to be computable by Derksen, Jeandel, and Koiran, but the termination argument for their algorithm appears not to yield any complexity bound. In this paper we follow a different approach and obtain a bound on the degree of the polynomials that define the closure. Our bound shows that the closure can be computed in elementary time. We also obtain upper bounds on the length of chains of linear algebraic groups, where all the groups are generated over a fixed number field.
△ Less
Submitted 3 March, 2025; v1 submitted 3 June, 2021;
originally announced June 2021.
-
Robust Minimum Cost Flow Problem Under Consistent Flow Constraints
Authors:
Christina Büsing,
Arie M. C. A. Koster,
Sabrina Schmitz
Abstract:
The robust minimum cost flow problem under consistent flow constraints (RobMCF$\equiv$) is a new extension of the minimum cost flow (MCF) problem. In the RobMCF$\equiv$ problem, we consider demand and supply that are subject to uncertainty. For all demand realizations, however, we require that the flow value on an arc needs to be equal if it is included in the predetermined arc set given. The obje…
▽ More
The robust minimum cost flow problem under consistent flow constraints (RobMCF$\equiv$) is a new extension of the minimum cost flow (MCF) problem. In the RobMCF$\equiv$ problem, we consider demand and supply that are subject to uncertainty. For all demand realizations, however, we require that the flow value on an arc needs to be equal if it is included in the predetermined arc set given. The objective is to find feasible flows that satisfy the equal flow requirements while minimizing the maximum occurring cost among all demand realizations.
In the case of a discrete set of scenarios, we derive structural results which point out the differences with the polynomial time solvable MCF problem on networks with integral capacities. In particular, the Integral Flow Theorem of Dantzig and Fulkerson does not hold. For this reason, we require integral flows in the entire paper. We show that the RobMCF$\equiv$ problem is strongly $\mathcal{NP}$-hard on acyclic digraphs by a reduction from the $(3,B2)$-Sat problem. Further, we demonstrate that the RobMCF$\equiv$ problem is weakly $\mathcal{NP}$-hard on series-parallel digraphs by providing a reduction from Partition and a pseudo-polynomial algorithm based on dynamic programming. Finally, we propose a special case on series-parallel digraphs for which we can solve the RobMCF$\equiv$ problem in polynomial time.
△ Less
Submitted 5 August, 2020;
originally announced August 2020.
-
GivEn -- Shape Optimization for Gas Turbines in Volatile Energy Networks
Authors:
Jan Backhaus,
Matthias Bolten,
Onur Tanil Doganay,
Matthias Ehrhardt,
Benedikt Engel,
Christian Frey,
Hanno Gottschalk,
Michael Günther,
Camilla Hahn,
Jens Jäschke,
Peter Jaksch,
Kathrin Klamroth,
Alexander Liefke,
Daniel Luft,
Lucas Mäde,
Vincent Marciniak,
Marco Reese,
Johanna Schultes,
Volker Schulz,
Sebastian Schmitz,
Johannes Steiner,
Michael Stiglmayr
Abstract:
This paper describes the project GivEn that develops a novel multicriteria optimization process for gas turbine blades and vanes using modern "adjoint" shape optimization algorithms. Given the many start and shut-down processes of gas power plants in volatile energy grids, besides optimizing gas turbine geometries for efficiency, the durability understood as minimization of the probability of fail…
▽ More
This paper describes the project GivEn that develops a novel multicriteria optimization process for gas turbine blades and vanes using modern "adjoint" shape optimization algorithms. Given the many start and shut-down processes of gas power plants in volatile energy grids, besides optimizing gas turbine geometries for efficiency, the durability understood as minimization of the probability of failure is a design objective of increasing importance. We also describe the underlying coupling structure of the multiphysical simulations and use modern, gradient based multicriteria optimization procedures to enhance the exploration of Pareto-optimal solutions.
△ Less
Submitted 20 February, 2020;
originally announced February 2020.
-
Adjoint Method to Calculate Shape Gradients of Failure Probabilaties for Turbomachinery Components
Authors:
Hanno Gottschalk,
Mohamed Saadi,
Onur Tanil Doganay,
Kathrin Klamroth,
Sebastian Schmitz
Abstract:
In the optimization of turbomachinery components, shape sensitivities for fluid dynamical objective functions have been used for a long time. As peak stress is not a differential func- tional of the shape, such highly efficient procedures so far have been missing for objective functionals that stem from mechan- ical integrity. This changes, if deterministic lifing criteria are replaced by probabil…
▽ More
In the optimization of turbomachinery components, shape sensitivities for fluid dynamical objective functions have been used for a long time. As peak stress is not a differential func- tional of the shape, such highly efficient procedures so far have been missing for objective functionals that stem from mechan- ical integrity. This changes, if deterministic lifing criteria are replaced by probabilistic criteria, which have been introduced recently to the field of low cycle fatigue (LCF). Here we present a finite element (FEA) based first discretize, then adjoin approach to the calculation of shape gradients (sen- sitivities) for the failure probability with regard to probabilistic LCF and apply it to simple and complex geometries, as e.g. a blisk geometry. We review the computation of failure probabilities with a FEA postprocessor and sketch the computation of the relevant quantities for the adjoint method. We demonstrate high accuracy and computational efficiency of the adjoint method compared to finite difference schemes. We discuss implementation details for rotating components with cyclic boundary conditions. Finally, we shortly comment on future development steps and on poten- tial applications in multi criteria optimization.
△ Less
Submitted 14 February, 2018;
originally announced February 2018.
-
On Ordinal Invariants in Well Quasi Orders and Finite Antichain Orders
Authors:
Mirna Džamonja,
Sylvain Schmitz,
Philippe Schnoebelen
Abstract:
We investigate the ordinal invariants height, length, and width of well quasi orders (WQO), with particular emphasis on width, an invariant of interest for the larger class of orders with finite antichain condition (FAC). We show that the width in the class of FAC orders is completely determined by the width in the class of WQOs, in the sense that if we know how to calculate the width of any WQO t…
▽ More
We investigate the ordinal invariants height, length, and width of well quasi orders (WQO), with particular emphasis on width, an invariant of interest for the larger class of orders with finite antichain condition (FAC). We show that the width in the class of FAC orders is completely determined by the width in the class of WQOs, in the sense that if we know how to calculate the width of any WQO then we have a procedure to calculate the width of any given FAC order. We show how the width of WQO orders obtained via some classical constructions can sometimes be computed in a compositional way. In particular, this allows proving that every ordinal can be obtained as the width of some WQO poset. One of the difficult questions is to give a complete formula for the width of Cartesian products of WQOs. Even the width of the product of two ordinals is only known through a complex recursive formula. Although we have not given a complete answer to this question we have advanced the state of knowledge by considering some more complex special cases and in particular by calculating the width of certain products containing three factors. In the course of writing the paper we have discovered that some of the relevant literature was written on cross-purposes and some of the notions re-discovered several times. Therefore we also use the occasion to give a unified presentation of the known results.
ERRATUM:We incorrectly claimed in Lemma 4.4(1) the formula $o(P\cdot Q)=o(P)\cdot o(Q)$ for wpos $P$ and $Q$ and incorrectly attributed it to Abraham and Bonnet. We incorrectly claimed in 4.4(2) that the formula for $h(P\cdot Q)$ was due to Abraham and Bonnet.
△ Less
Submitted 28 January, 2025; v1 submitted 1 November, 2017;
originally announced November 2017.
-
Diagonalization of indefinite saddle point forms
Authors:
Luka Grubišić,
Vadim Kostrykin,
Konstantin A. Makarov,
Stephan Schmitz,
Krešimir Veselić
Abstract:
We obtain sufficient conditions that ensure block diagonalization (by a direct rotation) of sign-indefinite symmetric sesquilinear forms as well as the associated operators that are semi-bounded neither from below nor from above. In the semi-bounded case, we refine the obtained results and, as an example, revisit the block Stokes Operator from fluid dynamics.
We obtain sufficient conditions that ensure block diagonalization (by a direct rotation) of sign-indefinite symmetric sesquilinear forms as well as the associated operators that are semi-bounded neither from below nor from above. In the semi-bounded case, we refine the obtained results and, as an example, revisit the block Stokes Operator from fluid dynamics.
△ Less
Submitted 13 October, 2017;
originally announced October 2017.
-
The Tan $2 Θ$-Theorem in Fluid Dynamics
Authors:
Luka Grubišić,
Vadim Kostrykin,
Konstantin A. Makarov,
Stephan Schmitz,
Krešimir Veselić
Abstract:
We show that the generalized Reynolds number (in fluid dynamics) introduced by Ladyzhenskaya is closely related to the rotation of the positive spectral subspace of the Stokes block-operator in the underlying Hilbert space. We also explicitly evaluate the bottom of the negative spectrum of the Stokes operator and prove a sharp inequality relating the distance from the bottom of its spectrum to the…
▽ More
We show that the generalized Reynolds number (in fluid dynamics) introduced by Ladyzhenskaya is closely related to the rotation of the positive spectral subspace of the Stokes block-operator in the underlying Hilbert space. We also explicitly evaluate the bottom of the negative spectrum of the Stokes operator and prove a sharp inequality relating the distance from the bottom of its spectrum to the origin and the length of the first positive gap.
△ Less
Submitted 1 August, 2017;
originally announced August 2017.
-
Probabilistic LCF Risk Evaluation of a Turbine Vane by Combined Size Effect and Notch Support Modeling
Authors:
Lucas Mäde,
Sebastian Schmitz,
Georg Rollmann,
Hanno Gottschalk,
Tilmann Beck
Abstract:
A probabilistic risk assessment for low cycle fatigue (LCF) based on the so-called size effect has been applied on gas-turbine design in recent years. In contrast, notch support modeling for LCF which intends to consider the change in stress below the surface of critical LCF regions is known and applied for decades. Turbomachinery components often show sharp stress gradients and very localized cri…
▽ More
A probabilistic risk assessment for low cycle fatigue (LCF) based on the so-called size effect has been applied on gas-turbine design in recent years. In contrast, notch support modeling for LCF which intends to consider the change in stress below the surface of critical LCF regions is known and applied for decades. Turbomachinery components often show sharp stress gradients and very localized critical regions for LCF crack initiations so that a life prediction should also consider notch and size effects. The basic concept of a combined probabilistic model that includes both, size effect and notch support, is presented. In many cases it can improve LCF life predictions significantly, in particular compared to \textit{E-N} curve predictions of standard specimens where no notch support and size effect is considered. Here, an application of such a combined model is shown for a turbine vane.
△ Less
Submitted 19 February, 2017;
originally announced February 2017.
-
Modeling, Minimizing and Managing the Risk of Fatigue for Mechanical Components
Authors:
L. Bittner,
H. Gottschalk,
M. Gröger,
N. Moch,
M. Saadi,
S. Schmitz
Abstract:
Mechanical components that are exposed to cyclic mechanical loading fail at loads that are well below the ultimate tensile strength. This process is known as fatigue. The failure time, that is the time when a first crack forms, is highly random. In this work we review some recent developments in the modelling of probabilistic failure times, understood as the time to the formation of a fatigue crac…
▽ More
Mechanical components that are exposed to cyclic mechanical loading fail at loads that are well below the ultimate tensile strength. This process is known as fatigue. The failure time, that is the time when a first crack forms, is highly random. In this work we review some recent developments in the modelling of probabilistic failure times, understood as the time to the formation of a fatigue crack.
We also discuss the how probabilistic models can be used in shape design with the design intent of optimizing the component's reliability. We give review a recent existence result for optimal shapes and we discuss continuous and discrete shape derivatives. Another application is optimal service scheduling. The mathematical fields involved range from reliability statistics over stochastic point processes, multiscale modeling, PDEs on variable geometries, shape optimization and numerical analysis to operations research.
△ Less
Submitted 26 February, 2016;
originally announced February 2016.
-
On invariant graph subspaces
Authors:
Konstantin A. Makarov,
Stephan Schmitz,
Albrecht Seelmann
Abstract:
In this paper we discuss the problem of decomposition for unbounded $2\times 2$ operator matrices by a pair of complementary invariant graph subspaces. Under mild additional assumptions, we show that such a pair of subspaces decomposes the operator matrix if and only if its domain is invariant for the angular operators associated with the graphs. As a byproduct of our considerations, we suggest a…
▽ More
In this paper we discuss the problem of decomposition for unbounded $2\times 2$ operator matrices by a pair of complementary invariant graph subspaces. Under mild additional assumptions, we show that such a pair of subspaces decomposes the operator matrix if and only if its domain is invariant for the angular operators associated with the graphs. As a byproduct of our considerations, we suggest a new block diagonalization procedure that resolves related domain issues. In the case when only a single invariant graph subspace is available, we obtain block triangular representations for the operator matrices.
△ Less
Submitted 1 August, 2016; v1 submitted 26 September, 2015;
originally announced September 2015.
-
Representation Theorems for indefinite quadratic forms without spectral gap
Authors:
Stephan Schmitz
Abstract:
The First and Second Representation Theorem for sign-indefinite quadratic forms are extended. We include new cases of unbounded forms associated with operators that do not necessarily have a spectral gap around zero. The kernel of the associated operators is determined for special cases. This extends results by Grubišić, Kostrykin, Makarov and Veselić in [Mathematika 59 (2013), 169--189].
The First and Second Representation Theorem for sign-indefinite quadratic forms are extended. We include new cases of unbounded forms associated with operators that do not necessarily have a spectral gap around zero. The kernel of the associated operators is determined for special cases. This extends results by Grubišić, Kostrykin, Makarov and Veselić in [Mathematika 59 (2013), 169--189].
△ Less
Submitted 8 September, 2014;
originally announced September 2014.
-
Minimal failure probability for ceramic design via shape control
Authors:
Matthias Bolten,
Hanno Gottschalk,
Sebastian Schmitz
Abstract:
We consider the probability of failure for components made of brittle mate- rials under one time application of a load as introduced by Weibull and Batdorf - Crosse and more recently studied by NASA and the STAU cooperation as an objective functional in shape optimization and prove the existence of optimal shapes in the class of shapes with a uniform cone property. The corresponding integrand of t…
▽ More
We consider the probability of failure for components made of brittle mate- rials under one time application of a load as introduced by Weibull and Batdorf - Crosse and more recently studied by NASA and the STAU cooperation as an objective functional in shape optimization and prove the existence of optimal shapes in the class of shapes with a uniform cone property. The corresponding integrand of the objective functional has convexity properties that allow to derive lower-semicontinuity according to Fujii (Opt. Th. Appl. 1988). These properties require less restrictive regularity assumptions for the boundaries and state functions compared to [arXiv:1210.4954]. Thereby, the weak formulation of linear elasticity can be kept for the abstract setting for shape optimization as presented in the book by Haslinger and Maekinen.
△ Less
Submitted 16 May, 2014; v1 submitted 26 November, 2013;
originally announced November 2013.
-
Probabilistic Analysis of LCF Crack Initiation Life of a Turbine Blade under Thermomechanical Loading
Authors:
Sebastian Schmitz,
Georg Rollmann,
Hanno Gottschalk,
Rolf Krause
Abstract:
An accurate assessment for fatigue damage as a function of activation and deactivation cycles is vital for the design of many engineering parts. In this paper we extend the probabilistic and local approach to this problem proposed in [1,2] and [3] to the case of non-constant temperature fields and thermomechanical loading. The method has been implemented as a finite element postprocessor and appli…
▽ More
An accurate assessment for fatigue damage as a function of activation and deactivation cycles is vital for the design of many engineering parts. In this paper we extend the probabilistic and local approach to this problem proposed in [1,2] and [3] to the case of non-constant temperature fields and thermomechanical loading. The method has been implemented as a finite element postprocessor and applied to an example case of a gas-turbine blade which is made of a conventionally cast nickel base superalloy.
△ Less
Submitted 2 October, 2013;
originally announced October 2013.
-
Reducing graph subspaces and strong solutions to operator Riccati equations
Authors:
Konstantin A. Makarov,
Stephan Schmitz,
Albrecht Seelmann
Abstract:
The problem of block diagonalization for diagonally dominant symmetric block operator matrices with self-adjoint diagonal entries is considered. We show that a reasonable block diagonalization with respect to a reducing graph subspace requires a related skew-symmetric operator to be a strong solution to the associated Riccati equation. Under mild additional regularity conditions, we also establish…
▽ More
The problem of block diagonalization for diagonally dominant symmetric block operator matrices with self-adjoint diagonal entries is considered. We show that a reasonable block diagonalization with respect to a reducing graph subspace requires a related skew-symmetric operator to be a strong solution to the associated Riccati equation. Under mild additional regularity conditions, we also establish that this skew-symmetric operator is a strong solution to the Riccati equation if and only if the graph subspace is reducing for the given operator matrix. These regularity conditions are shown to be automatically fulfilled whenever the corresponding relative bound of the off-diagonal part is sufficiently small. This extends the results by Albeverio, Makarov, and Motovilov in [Canad. J. Math. Vol. \textbf{55}, 2003, 449--503], where the off-diagonal part is required to be bounded.
△ Less
Submitted 24 July, 2013;
originally announced July 2013.
-
Risk estimation for LCF crack initiation
Authors:
Sebastian Schmitz,
Georg Rollmann,
Hanno Gottschalk,
Rolf Krause
Abstract:
An accurate risk assessment for fatigue damage is of vital importance for the design and service of today's turbomachinery components. We present an approach for quantifying the probability of crack initiation due to surface driven low-cycle fatigue (LCF). This approach is based on the theory of failure-time processes and takes inhomogeneous stress fields and size effects into account. The method…
▽ More
An accurate risk assessment for fatigue damage is of vital importance for the design and service of today's turbomachinery components. We present an approach for quantifying the probability of crack initiation due to surface driven low-cycle fatigue (LCF). This approach is based on the theory of failure-time processes and takes inhomogeneous stress fields and size effects into account. The method has been implemented as a finite-element postprocessor which uses quadrature formulae of higher order. Results of applying this new approach to an example case of a gas-turbine compressor disk are discussed.
△ Less
Submitted 12 February, 2013;
originally announced February 2013.
-
Optimal Reliability in Design for Fatigue Life
Authors:
Hanno Gottschalk,
Sebastian Schmitz
Abstract:
The failure of a component often is the result of a degradation process that originates with the formation of a crack. Fatigue describes the crack formation in the material under cyclic loading. Activation and deactivation operations of technical units are important examples in engineering where fatigue and especially low-cycle fatigue (LCF) play an essential role. A significant scatter in fatigue…
▽ More
The failure of a component often is the result of a degradation process that originates with the formation of a crack. Fatigue describes the crack formation in the material under cyclic loading. Activation and deactivation operations of technical units are important examples in engineering where fatigue and especially low-cycle fatigue (LCF) play an essential role. A significant scatter in fatigue life for many materials results in the necessity of advanced probabilistic models for fatigue. Moreover, optimization of reliability is of vital interest in engineering, where with respect to fatigue the cost functionals are motivated by the predicted probability for the integrity of the component after a certain number of load cycles. The natural mathematical language to model failure, here understood as crack initiation, is the language of spatio-temporal point processes and their first failure times. This translates the problem of optimal reliability in the framework of shape optimization. The cost functionals derived in this way for realistic optimal reliability problems are too singular to be $H^1$-lower semi-continuous as many damage mechanisms, like LCF, lead to crack initiation as a function of the stress at the component's surface. Realistic crack formation models therefore impose a new challenge to the theory of shape optimization. In this work, we have to modify the existence proof of optimal shapes, for the case of sufficiently smooth shapes using elliptic regularity, uniform Schauder estimates and compactness of strong solutions via the Arzela-Ascoli theorem. This result applies to a variety of crack initiation models and in particular applies to a recent probabilistic model for LCF.
△ Less
Submitted 29 October, 2013; v1 submitted 17 October, 2012;
originally announced October 2012.
