-
Compressible N-phase fluid mixture models
Authors:
M. F. P. ten Eikelder,
E. H. van Brummelen,
D. Schillinger
Abstract:
Fluid mixture models are essential for describing a wide range of physical phenomena, including wave dynamics and spinodal decomposition. However, there is a lack of consensus in the modeling of compressible mixtures, with limited connections between different classes of models. On the one hand, existing compressible two-phase flow models accurately describe wave dynamics, but do not incorporate p…
▽ More
Fluid mixture models are essential for describing a wide range of physical phenomena, including wave dynamics and spinodal decomposition. However, there is a lack of consensus in the modeling of compressible mixtures, with limited connections between different classes of models. On the one hand, existing compressible two-phase flow models accurately describe wave dynamics, but do not incorporate phase separation mechanisms. On the other hand, phase-field technology in fluid dynamics consists of models incorporating spinodal decomposition, however, a general phase-field theory for compressible mixtures remains largely undeveloped.
In this paper, we take an initial step toward bridging the gap between compressible two-phase flow models and phase-field models by developing a theory for compressible, isothermal N-phase mixtures. Our theory establishes a system of reduced complexity by formulating N mass balance laws alongside a single momentum balance law, thereby naturally extending the Navier-Stokes Korteweg model to N-phases and providing the Navier-Stokes Cahn-Hilliard/Allen-Cahn model for compressible mixtures. Key aspects of the framework include its grounding in continuum mixture theory and its preservation of thermodynamic consistency despite its reduced complexity.
△ Less
Submitted 31 March, 2025;
originally announced March 2025.
-
A study on nodal and isogeometric formulations for nonlinear dynamics of shear- and torsion-free rods
Authors:
Thi-Hoa Nguyen,
Bruno A. Roccia,
Dominik Schillinger,
Cristian C. Gebhardt
Abstract:
In this work, we compare the nodal and isogeometric spatial discretization schemes for the nonlinear formulation of shear- and torsion-free rods introduced in [1]. We investigate the resulting discrete solution space, the accuracy, and the computational cost of these spatial discretization schemes. To fulfill the required C1 continuity of the rod formulation, the nodal scheme discretizes the rod i…
▽ More
In this work, we compare the nodal and isogeometric spatial discretization schemes for the nonlinear formulation of shear- and torsion-free rods introduced in [1]. We investigate the resulting discrete solution space, the accuracy, and the computational cost of these spatial discretization schemes. To fulfill the required C1 continuity of the rod formulation, the nodal scheme discretizes the rod in terms of its nodal positions and directors using cubic Hermite splines. Isogeometric discretizations naturally fulfill this with smoothspline basis functions and discretize the rod only in terms of the positions of the control points [2], which leads to a discrete solution in multiple copies of the Euclidean space R3. They enable the employment of basis functions of one degree lower, i.e. quadratic C1 splines, and possibly reduce the number of degrees of freedom. When using the nodal scheme, since the defined director field is in the unit sphere S2, preserving this for the nodal director variable field requires an additional constraint of unit nodal directors. This leads to a discrete solution in multiple copies of the manifold R3xS2, however, results in zero nodal axial stress values. Allowing arbitrary length for the nodal directors, i.e. a nodal director field in R3 instead of S2 as within discrete rod elements, eliminates the constrained nodal axial stresses and leads to a discrete solution in multiple copies of R3. We discuss a strong and weak approach using the Lagrange multiplier method and penalty method, respectively, to enforce the unit nodal director constraint. We compare the resulting semi-discrete formulations and the computational cost of these discretization variants. We numerically demonstrate our findings via examples of a planar roll-up, a catenary, and a mooring line.
△ Less
Submitted 28 December, 2024;
originally announced December 2024.
-
The divergence-free velocity formulation of the consistent Navier-Stokes Cahn-Hilliard model with non-matching densities, divergence-conforming discretization, and benchmarks
Authors:
M. ten Eikelder,
D. Schillinger
Abstract:
The prototypical diffuse-interface model that describes multi-component flows is the Navier-Stokes Cahn-Hilliard model (NSCH). Over the last decades many NSCH models have appeared that claim to describe the same physical phenomena, yet are distinct from one another. In a recent article [M.F.P. ten Eikelder, K.G. van der Zee, I. Akkerman, and D. Schillinger, Math. Mod. Meth. Appl. S. 33, pp 175-221…
▽ More
The prototypical diffuse-interface model that describes multi-component flows is the Navier-Stokes Cahn-Hilliard model (NSCH). Over the last decades many NSCH models have appeared that claim to describe the same physical phenomena, yet are distinct from one another. In a recent article [M.F.P. ten Eikelder, K.G. van der Zee, I. Akkerman, and D. Schillinger, Math. Mod. Meth. Appl. S. 33, pp 175-221, 2023.] we have established a unified framework of virtually all NSCH models. The framework reveals that there is only a single consistent NSCH model that naturally emanates from the underlying mixture theory. In the current article we present, verify and validate this novel consistent NSCH model by means of numerical simulation. To this purpose we discretize a divergence-free velocity formulation of the NSCH model using divergence-conforming isogeometric spaces. We compare computations of our consistent model to results of existing models from literature. The predictive capability of the numerical methodology is demonstrated via three-dimensional computations of a rising bubble and the contraction of a liquid filament that compare well with experimental data.
△ Less
Submitted 16 November, 2023;
originally announced November 2023.
-
Higher order accurate mass lumping for explicit isogeometric methods based on approximate dual basis functions
Authors:
Rene Hiemstra,
Thi-Hoa Nguyen,
Sascha Eisentrager,
Wolfgang Dornisch,
Dominik Schillinger
Abstract:
This paper introduces a mathematical framework for explicit structural dynamics, employing approximate dual functionals and rowsum mass lumping. We demonstrate that the approach may be interpreted as a Petrov-Galerkin method that utilizes rowsum mass lumping or as a Galerkin method with a customized higher-order accurate mass matrix. Unlike prior work, our method correctly incorporates Dirichlet b…
▽ More
This paper introduces a mathematical framework for explicit structural dynamics, employing approximate dual functionals and rowsum mass lumping. We demonstrate that the approach may be interpreted as a Petrov-Galerkin method that utilizes rowsum mass lumping or as a Galerkin method with a customized higher-order accurate mass matrix. Unlike prior work, our method correctly incorporates Dirichlet boundary conditions while preserving higher order accuracy. The mathematical analysis is substantiated by spectral analysis and a two-dimensional linear benchmark that involves a non-linear geometric mapping. Our results reveal that our approach achieves accuracy and robustness comparable to a traditional Galerkin method employing the consistent mass formulation, while retaining the explicit nature of the lumped mass formulation.
△ Less
Submitted 20 October, 2023;
originally announced October 2023.
-
An EigenValue Stabilization Technique for Immersed Boundary Finite Element Methods in Explicit Dynamics
Authors:
Sascha Eisenträger,
Lars Radtke,
Wadhah Garhuom,
Stefan Löhnert,
Alexander Düster,
Daniel Juhre,
Dominik Schillinger
Abstract:
The application of immersed boundary methods in static analyses is often impeded by poorly cut elements (small cut elements problem), leading to ill-conditioned linear systems of equations and stability problems. While these concerns may not be paramount in explicit dynamics, a substantial reduction in the critical time step size based on the smallest volume fraction $χ$ of a cut element is observ…
▽ More
The application of immersed boundary methods in static analyses is often impeded by poorly cut elements (small cut elements problem), leading to ill-conditioned linear systems of equations and stability problems. While these concerns may not be paramount in explicit dynamics, a substantial reduction in the critical time step size based on the smallest volume fraction $χ$ of a cut element is observed. This reduction can be so drastic that it renders explicit time integration schemes impractical. To tackle this challenge, we propose the use of a dedicated eigenvalue stabilization (EVS) technique.
The EVS-technique serves a dual purpose. Beyond merely improving the condition number of system matrices, it plays a pivotal role in extending the critical time increment, effectively broadening the stability region in explicit dynamics. As a result, our approach enables robust and efficient analyses of high-frequency transient problems using immersed boundary methods. A key advantage of the stabilization method lies in the fact that only element-level operations are required.
This is accomplished by computing all eigenvalues of the element matrices and subsequently introducing a stabilization term that mitigates the adverse effects of cutting. Notably, the stabilization of the mass matrix $\mathbf{M}_\mathrm{c}$ of cut elements -- especially for high polynomial orders $p$ of the shape functions -- leads to a significant raise in the critical time step size $Δt_\mathrm{cr}$.
To demonstrate the efficacy of our technique, we present two specifically selected dynamic benchmark examples related to wave propagation analysis, where an explicit time integration scheme must be employed to leverage the increase in the critical time step size.
△ Less
Submitted 18 October, 2023;
originally announced October 2023.
-
Fourier analysis of membrane locking and unlocking
Authors:
Rene R. Hiemstra,
Federico Fuentes,
Dominik Schillinger
Abstract:
Membrane locking in finite element approximations of thin beams and shells has remained an unresolved topic despite four decades of research. In this article, we utilize Fourier analysis of the complete spectrum of natural vibrations and propose a criterion to identify and evaluate the severity of membrane locking. To demonstrate our approach, we utilize standard and mixed Galerkin formulations ap…
▽ More
Membrane locking in finite element approximations of thin beams and shells has remained an unresolved topic despite four decades of research. In this article, we utilize Fourier analysis of the complete spectrum of natural vibrations and propose a criterion to identify and evaluate the severity of membrane locking. To demonstrate our approach, we utilize standard and mixed Galerkin formulations applied to a circular Euler-Bernoulli ring discretized using uniform, periodic B-splines. By analytically computing the discrete Fourier operators, we obtain an exact representation of the normalized error across the entire spectrum of eigenvalues. Our investigation addresses key questions related to membrane locking, including mode susceptibility, the influence of polynomial order, and the impact of shell/beam thickness and radius of curvature. Furthermore, we compare the effectiveness of mixed and standard Galerkin methods in mitigating locking. By providing insights into the parameters affecting locking and introducing a criterion to evaluate its severity, this research contributes to the development of improved numerical methods for thin beams and shells.
△ Less
Submitted 13 June, 2023; v1 submitted 9 June, 2023;
originally announced June 2023.
-
Branching exponents of synthetic vascular trees under different optimality principles
Authors:
Etienne Jessen,
Marc C. Steinbach,
Charlotte Debbaut,
Dominik Schillinger
Abstract:
The branching behavior of vascular trees is often characterized using Murray's law. We investigate its validity using synthetic vascular trees generated under global optimization criteria. Our synthetic tree model does not incorporate Murray's law explicitly. Instead, we assume it holds implicitly and investigate the effects of different physical constraints and optimization goals on the branching…
▽ More
The branching behavior of vascular trees is often characterized using Murray's law. We investigate its validity using synthetic vascular trees generated under global optimization criteria. Our synthetic tree model does not incorporate Murray's law explicitly. Instead, we assume it holds implicitly and investigate the effects of different physical constraints and optimization goals on the branching exponent that is now allowed to vary locally. In particular, we include variable blood viscosity due to the Fåhræus--Lindqvist effect and enforce an equal pressure drop between inflow and the micro-circulation. Using our global optimization framework, we generate vascular trees with over one million terminal vessels and compare them against a detailed corrosion cast of the portal venous tree of a human liver. Murray's law is implicitly fulfilled when no additional constraints are enforced, indicating its validity in this setting. Variable blood viscosity or equal pressure drop leads to deviations from this optimum, but with the branching exponent inside the experimentally predicted range between 2.0 and 3.0. The validation against the corrosion cast shows good agreement from the portal vein down to the venules. Not enforcing Murray's law explicitly reduces the computational cost and increases the predictive capabilities of synthetic vascular trees. The ability to study optimal branching exponents across different scales can improve the functional assessment of organs.
△ Less
Submitted 24 April, 2023;
originally announced April 2023.
-
Thermodynamically consistent diffuse-interface mixture models of incompressible multicomponent fluids
Authors:
M. ten Eikelder,
K. van der Zee,
D. Schillinger
Abstract:
In this paper we derive a class of thermodynamically consistent diffuse-interface mixture models of incompressible multicomponent fluids. The class of mixture models is fully compatible with the continuum theory of mixtures. The resulting mixture models may be formulated either in constituent or in mixture quantities. This permits a direct comparison with the Navier-Stokes Cahn-Hilliard model with…
▽ More
In this paper we derive a class of thermodynamically consistent diffuse-interface mixture models of incompressible multicomponent fluids. The class of mixture models is fully compatible with the continuum theory of mixtures. The resulting mixture models may be formulated either in constituent or in mixture quantities. This permits a direct comparison with the Navier-Stokes Cahn-Hilliard model with non-matching densities, which reveals the key modeling simplifications of the latter.
△ Less
Submitted 18 February, 2023;
originally announced February 2023.
-
Constraints for eliminating the Gibbs phenomenon in finite element approximation spaces
Authors:
M. ten Eikelder,
S. Stoter,
Y. Bazilevs,
D. Schillinger
Abstract:
One of the major challenges in finite element methods is the mitigation of spurious oscillations near sharp layers and discontinuities known as the Gibbs phenomenon. In this article, we propose a set of functionals to identify spurious oscillations in best approximation problems in finite element spaces. Subsequently, we adopt these functionals in the formulation of constraints in an effort to eli…
▽ More
One of the major challenges in finite element methods is the mitigation of spurious oscillations near sharp layers and discontinuities known as the Gibbs phenomenon. In this article, we propose a set of functionals to identify spurious oscillations in best approximation problems in finite element spaces. Subsequently, we adopt these functionals in the formulation of constraints in an effort to eliminate the Gibbs phenomenon. By enforcing these constraints in best approximation problems, we can entirely eliminate over- and undershoot in one dimensional continuous approximations, and significantly suppress them in one- and higher-dimensional discontinuous approximations.
△ Less
Submitted 8 March, 2023; v1 submitted 9 February, 2023;
originally announced February 2023.
-
Rigorous mathematical optimization of synthetic hepatic vascular trees
Authors:
Etienne Jessen,
Marc C. Steinbach,
Charlotte Debbaut,
Dominik Schillinger
Abstract:
In this paper, we introduce a new framework for generating synthetic vascular trees, based on rigorous model-based mathematical optimization. Our main contribution is the reformulation of finding the optimal global tree geometry into a nonlinear optimization problem (NLP). This rigorous mathematical formulation accommodates efficient solution algorithms such as the interior point method and allows…
▽ More
In this paper, we introduce a new framework for generating synthetic vascular trees, based on rigorous model-based mathematical optimization. Our main contribution is the reformulation of finding the optimal global tree geometry into a nonlinear optimization problem (NLP). This rigorous mathematical formulation accommodates efficient solution algorithms such as the interior point method and allows us to easily change boundary conditions and constraints applied to the tree. Moreover, it creates trifurcations in addition to bifurcations. A second contribution is the addition of an optimization stage for the tree topology. Here, we combine constrained constructive optimization (CCO) with a heuristic approach to search among possible tree topologies. We combine the NLP formulation and the topology optimization into a single algorithmic approach. Finally, we attempt the validation of our new model-based optimization framework using a detailed corrosion cast of a human liver, which allows a quantitative comparison of the synthetic tree structure to the tree structure determined experimentally down to the fifth generation. The results show that our new framework is capable of generating asymmetric synthetic trees that match the available physiological corrosion cast data better than trees generated by the standard CCO approach.
△ Less
Submitted 10 February, 2022; v1 submitted 9 February, 2022;
originally announced February 2022.
-
Variationally consistent mass scaling for explicit time-integration schemes of lower- and higher-order finite element methods
Authors:
Stein K. F. Stoter,
Thi-Hoa Nguyen,
René R. Hiemstra,
Dominik Schillinger
Abstract:
In this paper, we propose a variationally consistent technique for decreasing the maximum eigenfrequencies of structural dynamics related finite element formulations. Our approach is based on adding a symmetric positive-definite term to the mass matrix that follows from the integral of the traction jump across element boundaries. The added term is weighted by a small factor, for which we derive a…
▽ More
In this paper, we propose a variationally consistent technique for decreasing the maximum eigenfrequencies of structural dynamics related finite element formulations. Our approach is based on adding a symmetric positive-definite term to the mass matrix that follows from the integral of the traction jump across element boundaries. The added term is weighted by a small factor, for which we derive a suitable, and simple, element-local parameter choice. For linear problems, we show that our mass-scaling method produces no adverse effects in terms of spatial accuracy and orders of convergence. We illustrate these properties in one, two and three spatial dimension, for quadrilateral elements and triangular elements, and for up to fourth order polynomials basis functions. To extend the method to non-linear problems, we introduce a linear approximation and show that a sizeable increase in critical time-step size can be achieved while only causing minor (even beneficial) influences on the dynamic response.
△ Less
Submitted 25 January, 2022;
originally announced January 2022.
-
A variational approach based on perturbed eigenvalue analysis for improving spectral properties of isogeometric multipatch discretizations
Authors:
Thi-Hoa Nguyen,
René R. Hiemstra,
Stein K. F. Stoter,
Dominik Schillinger
Abstract:
A key advantage of isogeometric discretizations is their accurate and well-behaved eigenfrequencies and eigenmodes. For degree two and higher, however, optical branches of spurious outlier frequencies and modes may appear due to boundaries or reduced continuity at patch interfaces. In this paper, we introduce a variational approach based on perturbed eigenvalue analysis that eliminates outlier fre…
▽ More
A key advantage of isogeometric discretizations is their accurate and well-behaved eigenfrequencies and eigenmodes. For degree two and higher, however, optical branches of spurious outlier frequencies and modes may appear due to boundaries or reduced continuity at patch interfaces. In this paper, we introduce a variational approach based on perturbed eigenvalue analysis that eliminates outlier frequencies without negatively affecting the accuracy in the remainder of the spectrum and modes. We then propose a pragmatic iterative procedure that estimates the perturbation parameters in such a way that the outlier frequencies are effectively reduced. We demonstrate that our approach allows for a much larger critical time-step size in explicit dynamics calculations. In addition, we show that the critical time-step size obtained with the proposed approach does not depend on the polynomial degree of spline basis functions.
△ Less
Submitted 14 February, 2022; v1 submitted 4 November, 2021;
originally announced November 2021.
-
A unified framework for Navier-Stokes Cahn-Hilliard models with non-matching densities
Authors:
M. ten Eikelder,
K. van der Zee,
I. Akkerman,
D. Schillinger
Abstract:
Over the last decades, many diffuse-interface Navier-Stokes Cahn-Hilliard models with non-matching densities have appeared in the literature. These models claim to describe the same physical phenomena, yet they are distinct from one another. The overarching objective of this work is to bring all of these models together by laying down a unified framework of Navier-Stokes Cahn-Hilliard models with…
▽ More
Over the last decades, many diffuse-interface Navier-Stokes Cahn-Hilliard models with non-matching densities have appeared in the literature. These models claim to describe the same physical phenomena, yet they are distinct from one another. The overarching objective of this work is to bring all of these models together by laying down a unified framework of Navier-Stokes Cahn-Hilliard models with non-zero mass fluxes. Our development is based on three unifying principles: (1) there is only one system of balance laws based on continuum mixture theory that describes the physical model, (2) there is only one natural energy-dissipation law that leads to quasi-incompressible Navier-Stokes Cahn-Hilliard models, (3) variations between the models only appear in the constitutive choices. The framework presented in this work now completes the fundamental exploration of alternate non-matching density Navier-Stokes Cahn-Hilliard models that utilize a single momentum equation for the mixture velocity, but leaves open room for further sophistication in the energy functional and constitutive dependence.
△ Less
Submitted 10 February, 2023; v1 submitted 19 October, 2021;
originally announced October 2021.
-
A DEIM driven reduced basis method for the diffuse Stokes/Darcy model coupled at parametric phase-field interfaces
Authors:
Stein K. F. Stoter,
Etienne Jessen,
Viktor Niedens,
Dominik Schillinger
Abstract:
In this article, we develop a reduced basis method for efficiently solving the coupled Stokes/Darcy equations with parametric internal geometry. To accommodate possible changes in topology, we define the Stokes and Darcy domains implicitly via a phase-field indicator function. In our reduced order model, we approximate the parameter-dependent phase-field function with a discrete empirical interpol…
▽ More
In this article, we develop a reduced basis method for efficiently solving the coupled Stokes/Darcy equations with parametric internal geometry. To accommodate possible changes in topology, we define the Stokes and Darcy domains implicitly via a phase-field indicator function. In our reduced order model, we approximate the parameter-dependent phase-field function with a discrete empirical interpolation method (DEIM) that enables affine decomposition of the associated linear and bilinear forms. In addition, we introduce a modification of DEIM that leads to non-negativity preserving approximations, thus guaranteeing positive-semidefiniteness of the system matrix. We also present a strategy for determining the required number of DEIM modes for a given number of reduced basis functions. We couple reduced basis functions on neighboring patches to enable the efficient simulation of large-scale problems that consist of repetitive subdomains. We apply our reduced basis framework to efficiently solve the inverse problem of characterizing the subsurface damage state of a complete in-situ leach mining site.
△ Less
Submitted 9 November, 2021; v1 submitted 4 October, 2021;
originally announced October 2021.
-
Unification of variational multiscale analysis and Nitsche's method, and a resulting boundary layer fine-scale model
Authors:
Stein K. F. Stoter,
Marco F. P. ten Eikelder,
Frits de Prenter,
Ido Akkerman,
E. Harald van Brummelen,
Clemens V. Verhoosel,
Dominik Schillinger
Abstract:
We show that in the variational multiscale framework, the weak enforcement of essential boundary conditions via Nitsche's method corresponds directly to a particular choice of projection operator. The consistency, symmetry and penalty terms of Nitsche's method all originate from the fine-scale closure dictated by the corresponding scale decomposition. As a result of this formalism, we are able to…
▽ More
We show that in the variational multiscale framework, the weak enforcement of essential boundary conditions via Nitsche's method corresponds directly to a particular choice of projection operator. The consistency, symmetry and penalty terms of Nitsche's method all originate from the fine-scale closure dictated by the corresponding scale decomposition. As a result of this formalism, we are able to determine the exact fine-scale contributions in Nitsche-type formulations. In the context of the advection-diffusion equation, we develop a residual-based model that incorporates the non-vanishing fine scales at the Dirichlet boundaries. This results in an additional boundary term with a new model parameter. We then propose a parameter estimation strategy for all parameters involved that is also consistent for higher-order basis functions. We illustrate with numerical experiments that our new augmented model mitigates the overly diffusive behavior that the classical residual-based fine-scale model exhibits in boundary layers at boundaries with weakly enforced essential conditions.
△ Less
Submitted 30 September, 2020;
originally announced September 2020.
-
A Framework for Data-Driven Computational Dynamics Based on Nonlinear Optimization
Authors:
Cristian Guillermo Gebhardt,
Marc Christian Steinbach,
Dominik Schillinger,
Raimund Rolfes
Abstract:
In this article, we present an extension of the formulation recently developed by the authors (A Framework for Data-Driven Computational Mechanics Based on Nonlinear Optimization, arXiv:1910.12736 [math.NA]) to the structural dynamics setting. Inspired by a structure-preserving family of variational integrators, our new formulation relies on a discrete balance equation that establishes the dynamic…
▽ More
In this article, we present an extension of the formulation recently developed by the authors (A Framework for Data-Driven Computational Mechanics Based on Nonlinear Optimization, arXiv:1910.12736 [math.NA]) to the structural dynamics setting. Inspired by a structure-preserving family of variational integrators, our new formulation relies on a discrete balance equation that establishes the dynamic equilibrium. From this point of departure, we first derive an "exact" discrete-continuous nonlinear optimization problem that works directly with data sets. We then develop this formulation further into an "approximate" nonlinear optimization problem that relies on a general constitutive model. This underlying model can be identified from a data set in an offline phase. To showcase the advantages of our framework, we specialize our methodology to the case of a geometrically exact beam formulation that makes use of all elements of our approach. We investigate three numerical examples of increasing difficulty that demonstrate the excellent computational behavior of the proposed framework and motivate future research in this direction.
△ Less
Submitted 22 December, 2019;
originally announced December 2019.
-
A Framework for Data-Driven Computational Mechanics Based on Nonlinear Optimization
Authors:
Cristian Guillermo Gebhardt,
Dominik Schillinger,
Marc Christian Steinbach,
Raimund Rolfes
Abstract:
Data-Driven Computational Mechanics is a novel computing paradigm that enables the transition from standard data-starved approaches to modern data-rich approaches. At this early stage of development, one can distinguish two mainstream directions. The first one relies on a discrete-continuous optimization problem and seeks to assign to each material point a point in the phase space that satisfies c…
▽ More
Data-Driven Computational Mechanics is a novel computing paradigm that enables the transition from standard data-starved approaches to modern data-rich approaches. At this early stage of development, one can distinguish two mainstream directions. The first one relies on a discrete-continuous optimization problem and seeks to assign to each material point a point in the phase space that satisfies compatibility and equilibrium, while being closest to the data set provided. The second one is a data driven inverse approach that seeks to reconstruct a constitutive manifold from data sets by manifold learning techniques, relying on a well-defined functional structure of the underlying constitutive law. In this work, we propose a third route that combines the strengths of the two existing directions and mitigates some of their weaknesses. This is achieved by the formulation of an approximate nonlinear optimization problem, which can be robustly solved, is computationally efficient, and does not rely on any special functional structure of the reconstructed constitutive manifold. Additional benefits include the natural incorporation of kinematic constraints and the possibility to operate with implicitly defined stress-strain relations. We discuss important mathematical aspects of our approach for a data-driven truss element and investigate its key numerical behavior for a data-driven beam element that makes use of all components of our methodology.
△ Less
Submitted 28 October, 2019;
originally announced October 2019.
-
A review of the finite cell method for nonlinear structural analysis of complex CAD and image-based geometric models
Authors:
Dominik Schillinger,
Quanji Cai,
Ralf-Peter Mundani,
Ernst Rank
Abstract:
The finite cell method (FCM) belongs to the class of immersed boundary methods, and combines the fictitious domain approach with high-order approximation, adaptive integration and weak imposition of unfitted Dirichlet boundary conditions. For the analysis of complex geometries, it circumvents expensive and potentially error-prone meshing procedures, while maintaining high rates of convergence. The…
▽ More
The finite cell method (FCM) belongs to the class of immersed boundary methods, and combines the fictitious domain approach with high-order approximation, adaptive integration and weak imposition of unfitted Dirichlet boundary conditions. For the analysis of complex geometries, it circumvents expensive and potentially error-prone meshing procedures, while maintaining high rates of convergence. The present contribution provides an overview of recent accomplishments in the FCM with applications in structural mechanics. First, we review the basic components of the technology using the p- and B-spline versions of the FCM. Second, we illustrate the typical solution behavior for linear elasticity in 1D. Third, we show that it is straightforward to extend the FCM to nonlinear elasticity. We also outline that the FCM can be extended to applications beyond structural mechanics, such as transport processes in porous media. Finally, we demonstrate the benefits of the FCM with two application examples, i.e. the vibration analysis of a ship propeller described by T-spline CAD surfaces and the nonlinear compression test of a CT-based metal foam.
△ Less
Submitted 3 July, 2018;
originally announced July 2018.
-
Residual-based variational multiscale modeling in a discontinuous Galerkin framework
Authors:
Stein K. F. Stoter,
Sergio R. Turteltaub,
Steven J. Hulshoff,
Dominik Schillinger
Abstract:
We develop the general form of the variational multiscale method in a discontinuous Galerkin framework. Our method is based on the decomposition of the true solution into discontinuous coarse-scale and discontinuous fine-scale parts. The obtained coarse-scale weak formulation includes two types of fine-scale contributions. The first type corresponds to a fine-scale volumetric term, which we formul…
▽ More
We develop the general form of the variational multiscale method in a discontinuous Galerkin framework. Our method is based on the decomposition of the true solution into discontinuous coarse-scale and discontinuous fine-scale parts. The obtained coarse-scale weak formulation includes two types of fine-scale contributions. The first type corresponds to a fine-scale volumetric term, which we formulate in terms of a residual-based model that also takes into account fine-scale effects at element interfaces. The second type consists of independent fine-scale terms at element interfaces, which we formulate in terms of a new fine-scale "interface model". We demonstrate for the one-dimensional Poisson problem that existing discontinuous Galerkin formulations, such as the interior penalty method, can be rederived by choosing particular fine-scale interface models. The multiscale formulation thus opens the door for a new perspective on discontinuous Galerkin methods and their numerical properties. This is demonstrated for the one-dimensional advection-diffusion problem, where we show that upwind numerical fluxes can be interpreted as an ad hoc remedy for missing volumetric fine-scale terms.
△ Less
Submitted 18 September, 2017; v1 submitted 12 September, 2017;
originally announced September 2017.
