-
Effect of Uniform and Non-uniform wall heating on Three-Dimensional Magneto-Hydrodynamics Natural Convection and Entropy Generation: A computational study using New Higher Order Super Compact Scheme
Authors:
Ashwani Punia,
Rajendra K. Ray
Abstract:
Current research work deals with the effect of uniform and non-uniform wall heating on magnetohydrodynamic (MHD) natural convection within a three-dimensional (3D) cavity filled with molten lithium. A new Higher-Order Super Compact (HOSC) finite difference scheme is used to analyze the thermal behavior under both heating scenarios. After the quantitative and qualitative validations, the computed r…
▽ More
Current research work deals with the effect of uniform and non-uniform wall heating on magnetohydrodynamic (MHD) natural convection within a three-dimensional (3D) cavity filled with molten lithium. A new Higher-Order Super Compact (HOSC) finite difference scheme is used to analyze the thermal behavior under both heating scenarios. After the quantitative and qualitative validations, the computed results are analyzed for a range of Hartman number ($Ha = 25, 50, 100, 150$) and Rayleigh number ($Ra = 10^3, 10^4, 10^5$) with fixed $Pr=0.065$ (molten lithium). Three distinct heating scenarios, i.e., uniform heating ($T_h = 1$), $y$-dependent non-uniform heating ($T_h = sin(πy$)), and a combination of $y$ and $z$-dependent non-uniform heating ($T_h = sin(πy)sin(πz)$) are investigated on the left wall ($x=0$) of the cubic cavity. It is found that variations in the $Ha$ and $Ra$, along with distinct thermal boundary conditions, exert significant effects on both the temperature distribution and flow field inside the 3D cubical cavity. Specifically, an increase in $Ra$ corresponds to enhanced heat transfer, highlighting the dominance of convection. Conversely, an increase in $Ha$ leads to a reduction in heat transfer due to the deceleration of fluid velocity. The scenario in which walls are uniformly heated exhibits the most significant total entropy generation. It is observed that with an increase in the $Ra$, the Bejan number ($Be$) decreases, which ultimately leads to an increase in total entropy generation. The implementation of the new HOSC scheme in this analysis showcases its effectiveness in capturing the complexities of 3D MHD-driven natural convection and entropy generation. This study offers significant information that might help improve the optimization and design of relevant engineering systems. Thus, our work stands out as genuinely novel and pioneering in its approach.
△ Less
Submitted 3 August, 2024;
originally announced August 2024.
-
A Novel Gaussian filter-based Pressure Correction Technique with Super Compact Scheme for Unsteady 3D Incompressible, Viscous Flows
Authors:
Ashwani Punia,
Rajendra K. Ray
Abstract:
This work deals with a novel Gaussian filter-based pressure correction technique with a super compact higher order finite difference scheme for solving unsteady three-dimensional (3D) incompressible, viscous flows. This pressure correction technique offers significant advantages in terms of optimizing computational time by taking minimum iterations to reach the required accuracy, making it highly…
▽ More
This work deals with a novel Gaussian filter-based pressure correction technique with a super compact higher order finite difference scheme for solving unsteady three-dimensional (3D) incompressible, viscous flows. This pressure correction technique offers significant advantages in terms of optimizing computational time by taking minimum iterations to reach the required accuracy, making it highly efficient and cost-effective. Pressure fields often exhibit highly nonlinear behavior, and employing the Gaussian filter can help to enhance their reliability by reducing noise and uncertainties. On the other hand, the super compact scheme uses minimum grid points to produce second-order accuracy in time and fourth-order accuracy in space variables. The main focus of this study is to enhance the accuracy and efficiency and minimize the computational cost of solving complex fluid flow problems. The super compact scheme utilizes 19 grid points at the known time level (i.e., $n^{th}$ time level) and only seven grid points from the unknown time level (i.e., $n + 1$ time level). By employing the above strategies, it becomes possible to notably decrease computational expenses while maintaining the accuracy of the computational scheme for solving complex fluid flow problems. We have implemented our methodology across three distinct scenarios: the 3D Burger's equation having analytical solution, and two variations of the lid-driven cavity problem. The outcomes of our numerical simulations exhibit a remarkable concordance, aligning exceptionally well with both the analytical benchmarks and previously validated numerical findings for the cavity problems.
△ Less
Submitted 26 July, 2024;
originally announced July 2024.
-
A New Higher-Order Super Compact Finite Difference Scheme to Study Three-Dimensional Non-Newtonian Flows
Authors:
Ashwani Punia,
Rajendra K. Ray
Abstract:
This work introduces a new higher-order accurate super compact (HOSC) finite difference scheme for solving complex unsteady three-dimensional (3D) non-Newtonian fluid flow problems. As per the author's knowledge, the proposed scheme is the first ever developed finite difference scheme to solve three-dimensional non-Newtonian flow problem. Not only that, the proposed method is fourth-order accurate…
▽ More
This work introduces a new higher-order accurate super compact (HOSC) finite difference scheme for solving complex unsteady three-dimensional (3D) non-Newtonian fluid flow problems. As per the author's knowledge, the proposed scheme is the first ever developed finite difference scheme to solve three-dimensional non-Newtonian flow problem. Not only that, the proposed method is fourth-order accurate in space variables and second-order accurate in time. Also, the proposed scheme utilizes only seven directly adjacent grid points, at the $(n+1)^{th}$ time level, around which the finite difference discretization is made. The governing equations are solved using a time-marching methodology, and pressure is calculated using a pressure-correction strategy based on the modified artificial compressibility method. Using the power-law viscosity model, we tackle the benchmark problem of a 3D lid-driven cavity, systematically analyzing the varied rheological behavior of shear-thinning ($n=0.5$), shear-thickening $(n=1.5)$, and Newtonian $(n=1.0)$ fluids across different Reynolds numbers $(Re= 1, 50, 100, 200)$. Both Newtonian and non-Newtonian results are carefully investigated in terms of streamlines, velocity variation, pressure distributions, and viscosity contours, and the computed results are validated with the existing benchmark results. The findings demonstrate excellent agreement with the existing results. This extensive analysis, using the new HOSC scheme, not only increases our understanding of non-Newtonian fluid behavior but also provides a robust foundation for future research and practical applications.
△ Less
Submitted 26 July, 2024;
originally announced July 2024.
-
Impact of a Cold Control Plate on Fluid Flow and Heat Transfer across an Isothermally Heated Rotary Oscillating Circular Cylinder
Authors:
Amarjit Haty,
Rajendra K. Ray,
H. V. R. Mittal
Abstract:
The main objective of this paper is to study the effect of a cold, vertical, arc-shaped control plate on the flow characteristics and forced convective heat transfer mechanism across a rotary oscillating, isothermally heated circular cylinder. Two-dimensional, unsteady, incompressible, laminar, and viscous flow of a Newtonian, constant property fluid is considered across the cylinder. The simulati…
▽ More
The main objective of this paper is to study the effect of a cold, vertical, arc-shaped control plate on the flow characteristics and forced convective heat transfer mechanism across a rotary oscillating, isothermally heated circular cylinder. Two-dimensional, unsteady, incompressible, laminar, and viscous flow of a Newtonian, constant property fluid is considered across the cylinder. The simulations are performed with an in-house code for various gap ratios between the control plate and the cylinder ($0\leq d/R_0 \leq 3$), maximum angular velocity ($0.5\leq α_m \leq 4$) and frequency ratio of oscillation ($f/f_0=0.5,\ 3$) at Prandtl number $0.7$ and Reynolds number $150$. Here, $d$ denotes the gap between the surface of the cylinder and the leading surface of the control plate, $R_0$ denotes the radius of the cylinder, $f$ is the frequency of oscillation and $f_0$ is the frequency of natural vortex shedding. $d/R_0=0$ corresponds to the no plate case. Heat transfer and vortex shedding phenomena are discussed in relation to one another. A significant increase in heat transmission is observed for all $α_m$ with the gap ratio of $d/R_0=0.5$ and $f/f_0=0.5$. The heat absorption on the surface of the control plate decreases to zero with increasing gap ratio when $α_m=0.5$ and $f/f_0=0.5$ but never becomes zero when $α_m=4$ and $f/f_0=3$. Additionally, when compared to the no plate case with $(α_m,\ f/f_0)=(0.5,\ 0.5)$, the maximum peak of the drag coefficient is decreased by $9.877\%$ for the gap ratio of $d/R_0=3$. For $α_m=4$ and $f/f_0=3$, the smallest gap ratio of $d/R_0=0.5$ is found to significantly increase the lift coefficient relative to other cases.
△ Less
Submitted 2 February, 2023;
originally announced February 2023.
-
Impact of an Arc-shaped Control Plate on Flow and Heat Transfer around a Isothermally Heated Rotating Circular Cylinder
Authors:
Amarjit Haty,
Rajendra K. Ray
Abstract:
The main objective of this paper is to study the flow characteristics of a rotating, isothermally heated circular cylinder with a vertical arc-shaped control plate placed downstream. Stream function-Vorticity ($ψ-ω$) formulation of two dimensional (2-D) Navier-Stokes (N-S) equations is considered as the governing equation and the simulations are performed for different distances of the control pla…
▽ More
The main objective of this paper is to study the flow characteristics of a rotating, isothermally heated circular cylinder with a vertical arc-shaped control plate placed downstream. Stream function-Vorticity ($ψ-ω$) formulation of two dimensional (2-D) Navier-Stokes (N-S) equations is considered as the governing equation and the simulations are performed for different distances of the control plate ($0.5$, $1$, $2$, $3$), rotational rates ($0.5$, $1$, $2.07$, $3.25$) at Prandtl number $0.7$ and Reynolds number $150$. The governing equations are discretized using the Higher Order Compact (HOC) scheme and the system of algebraic equations, arising from HOC discretization, is solved using the Bi-Conjugate Gradient Stabilized approach. Present computed results show that the vortex shedding plane is shifted upward from the centerline of the flow domain by the cylinder's rotational motion. The structure of the wake varies based on the plate's position. The size of vortices is greatly reduced when the control plate is set at $d/R_0=3$ and the rotational rate is very high. At greater rotational rates, the impact of varied positions of the arc-shaped control plate is very significant. The rotation of the cylinder and the location of the plate can be used to lower or enhance the values of drag and lift coefficients as well as the heat transfer from the surface of the cylinder. The maximum value of the drag coefficient, which is about $3$, is achieved for $d/R_0=2$ and $α=3.25$.
△ Less
Submitted 31 January, 2023;
originally announced January 2023.
-
On the Development of a Coupled Non-linear Telegraph-Diffusion Model for Image Restoration
Authors:
Sudeb Majee,
Subit K. Jain,
Rajendra K. Ray,
Ananta K. Majee
Abstract:
In this work, we propose a telegraph coupled partial differential equation (TCPDE) based model for image restoration. New framework interpolates between a couple of non-linear telegraph equation and a parabolic equation. Proposed strategy can be applied to significantly preserve the oscillatory and texture pattern in an image, even in low signal-to-noise ratio. First, we prove that the present mod…
▽ More
In this work, we propose a telegraph coupled partial differential equation (TCPDE) based model for image restoration. New framework interpolates between a couple of non-linear telegraph equation and a parabolic equation. Proposed strategy can be applied to significantly preserve the oscillatory and texture pattern in an image, even in low signal-to-noise ratio. First, we prove that the present model has a unique global weak solution using Banach's fixed point theorem. Then apply our model over a set of gray-level images to illustrate the superiority of the proposed model over the recently developed hyperbolic-parabolic PDE based models as well as coupled diffusion-based model.
△ Less
Submitted 11 September, 2019; v1 submitted 30 August, 2019;
originally announced August 2019.
-
Well-posedness study of a non-linear hyperbolic-parabolic coupled system applied to image speckle reduction
Authors:
Sudeb Majee,
Rajendra K. Ray,
Ananta K. Majee
Abstract:
In this article, we consider a non-linear hyperbolic-parabolic coupled system based on telegraph diffusion framework applied to image despeckling. A separate equation is used to calculate the edge variable, which improves the quality of the despeckled images. A well-posedness result of the proposed coupled system is settled via Schauder's fixed point theorem. Numerical experiments are reported to…
▽ More
In this article, we consider a non-linear hyperbolic-parabolic coupled system based on telegraph diffusion framework applied to image despeckling. A separate equation is used to calculate the edge variable, which improves the quality of the despeckled images. A well-posedness result of the proposed coupled system is settled via Schauder's fixed point theorem. Numerical experiments are reported to illustrate the effectiveness of the proposed model, with recently developed models, over a set of gray level test images contaminated by speckle noise.
△ Less
Submitted 11 August, 2019; v1 submitted 7 August, 2019;
originally announced August 2019.
-
A Gray Level Indicator-Based Regularized Telegraph Diffusion Equation Applied to Image Despeckling
Authors:
Sudeb Majee,
Rajendra K Ray,
Ananta K Majee
Abstract:
In this work, a gray level indicator based non-linear telegraph diffusion model is presented for multiplicative noise removal problem. Most of the researchers focus only on diffusion equation-based model for multiplicative noise removal problem. The suggested model uses the benefit of the combined effect of diffusion equation as well as the wave equation. Wave nature of the model preserves the hig…
▽ More
In this work, a gray level indicator based non-linear telegraph diffusion model is presented for multiplicative noise removal problem. Most of the researchers focus only on diffusion equation-based model for multiplicative noise removal problem. The suggested model uses the benefit of the combined effect of diffusion equation as well as the wave equation. Wave nature of the model preserves the high oscillatory and texture pattern in an image. In this model, the diffusion coefficient depends not only on the image gradient but also on the gray level of the image, which controls the diffusion process better than only gradient-based diffusion models. Moreover, we prove the well-posedness of the present model using Schauder fixed point theorem. Furthermore, we show the superiority of the proposed model over a recently developed method on a set of gray level test images which are corrupted by speckle noise.
△ Less
Submitted 6 August, 2019; v1 submitted 3 August, 2019;
originally announced August 2019.
-
A Fuzzy Edge Detector Driven Telegraph Total Variation Model For Image Despeckling
Authors:
Sudeb Majee,
Subit K Jain,
Rajendra K Ray,
Ananta K Majee
Abstract:
Speckle noise suppression is a challenging and crucial pre-processing stage for higher-level image analysis. In this work, a new attempt has been made using telegraph total variation equation and fuzzy set theory for speckle noise suppression. The intuitionistic fuzzy divergence (IFD) function has been used to distinguish between edges and noise. To the best of the author's knowledge, most of the…
▽ More
Speckle noise suppression is a challenging and crucial pre-processing stage for higher-level image analysis. In this work, a new attempt has been made using telegraph total variation equation and fuzzy set theory for speckle noise suppression. The intuitionistic fuzzy divergence (IFD) function has been used to distinguish between edges and noise. To the best of the author's knowledge, most of the studies on multiplicative speckle noise removal process focus on only diffusion-based filters, and little attention has been paid to the study of fuzzy set theory. The proposed approach enjoy the benefits of both telegraph total variation equation and fuzzy edge detector, which is not only robust to noise but also preserves image structural details. Moreover, we establish the existence and uniqueness of a weak solution of the regularized version of the proposed model using Schauder fixed point theorem. With the proposed model, despeckling is carried out on natural and Synthetic Aperture Radar (SAR) images. The experimental results of the proposed model are reported, which found better in terms of noise suppression and detail/edge preservation, with respect to the existing approaches.
△ Less
Submitted 5 August, 2019; v1 submitted 3 August, 2019;
originally announced August 2019.
-
Analysis and Simulation of a Coupled Diffusion based Image Denoising Model
Authors:
Subit K. Jain,
Sudeb Majee,
Rajendra K. Ray,
Ananta K. Majee
Abstract:
In this study, a new coupled Partial Differential Equation (CPDE) based image denoising model incorporating space-time regularization into non-linear diffusion is proposed. This proposed model is fitted with additive Gaussian noise which performs efficient image smoothing along with the preservation of edges and fine structures. For this purpose, we propose a new functional minimization framework…
▽ More
In this study, a new coupled Partial Differential Equation (CPDE) based image denoising model incorporating space-time regularization into non-linear diffusion is proposed. This proposed model is fitted with additive Gaussian noise which performs efficient image smoothing along with the preservation of edges and fine structures. For this purpose, we propose a new functional minimization framework to remove the image noise, which results in solving a system of three partial differential equations (PDEs). Our proposed model is dissimilar from the existing CPDE models as it includes two additional evolution equations to handle edge strength function and data fidelity term. These two evolution equations control the smoothing process and force the resultant denoised solution to be close to the initial solution. To the best of our knowledge, the proposed model is the only work, which deciphers the combined effect of both the terms using separate PDEs. Furthermore, we establish the existence and uniqueness of a weak solution of the proposed system using the time discretization method with $H^1$ initial data. Finally, we used a generalized weighted average finite difference scheme to efficiently solve the coupled system and experiment results show the effectiveness of the proposed CPDE model.
△ Less
Submitted 7 August, 2019; v1 submitted 10 July, 2019;
originally announced July 2019.
