-
Nonlinear model order reduction of resonant piezoelectric micro-actuators: an invariant manifold approach
Authors:
Andrea Opreni,
Giorgio Gobat,
Cyril Touzé,
Attilio Frangi
Abstract:
This paper presents a novel derivation of the direct parametrisation method for invariant manifolds able to build simulation-free reduced-order models for nonlinear piezoelectric structures, with a particular emphasis on applications to Micro-Electro-Mechanical-Systems. The constitutive model adopted accounts for the hysteretic and electrostrictive response of the piezoelectric material by resorti…
▽ More
This paper presents a novel derivation of the direct parametrisation method for invariant manifolds able to build simulation-free reduced-order models for nonlinear piezoelectric structures, with a particular emphasis on applications to Micro-Electro-Mechanical-Systems. The constitutive model adopted accounts for the hysteretic and electrostrictive response of the piezoelectric material by resorting to the Landau-Devonshire theory of ferroelectrics. Results are validated with full-order simulations operated with a harmonic balance finite element method to highlight the reliability of the proposed reduction procedure. Numerical results show a remarkable gain in terms of computing time as a result of the dimensionality reduction process over low dimensional invariant sets. Results are also compared with experimental data to highlight the remarkable benefits of the proposed model order reduction technique.
△ Less
Submitted 13 June, 2023;
originally announced June 2023.
-
High order direct parametrisation of invariant manifolds for model order reduction of finite element structures: application to large amplitude vibrations and uncovering of a folding point
Authors:
Alessandra Vizzaccaro,
Andrea Opreni,
Loïc Salles,
Attilio Frangi,
Cyril Touzé
Abstract:
This paper investigates model-order reduction methods for geometrically nonlinear structures. The parametrisation method of invariant manifolds is used and adapted to the case of mechanical systems expressed in the physical basis, so that the technique is directly applicable to problems discretised by the finite element method. Two nonlinear mappings, respectively related to displacement and veloc…
▽ More
This paper investigates model-order reduction methods for geometrically nonlinear structures. The parametrisation method of invariant manifolds is used and adapted to the case of mechanical systems expressed in the physical basis, so that the technique is directly applicable to problems discretised by the finite element method. Two nonlinear mappings, respectively related to displacement and velocity, are introduced, and the link between the two is made explicit at arbitrary order of expansion. The same development is performed on the reduced-order dynamics which is computed at generic order following the different styles of parametrisation. More specifically, three different styles are introduced and commented: the graph style, the complex normal form style and the real normal form style. These developments allow making better connections with earlier works using these parametrisation methods. The technique is then applied to three different examples. A clamped-clamped arch with increasing curvature is first used to show an example of a system with a softening behaviour turning to hardening at larger amplitudes, which can be replicated with a single mode reduction. Secondly, the case of a cantilever beam is investigated. It is shown that the invariant manifold of the first mode shows a folding point at large amplitudes which is not connected to an internal resonance. This exemplifies the failure of the graph style due to the folding point, whereas the normal form style is able to pass over the folding. Finally, A MEMS micromirror undergoing large rotations is used to show the importance of using high-order expansions on an industrial example.
△ Less
Submitted 21 September, 2021;
originally announced September 2021.
-
Model Order Reduction based on Direct Normal Form: Application to Large Finite Element MEMS Structures Featuring Internal Resonance
Authors:
Andrea Opreni,
Alessandra Vizzaccaro,
Attilio Frangi,
Cyril Touzé
Abstract:
Dimensionality reduction in mechanical vibratory systems poses challenges for distributed structures including geometric nonlinearities, mainly because of the lack of invariance of the linear subspaces. A reduction method based on direct normal form computation for large finite element (FE) models is here detailed. The main advantage resides in operating directly from the physical space, hence avo…
▽ More
Dimensionality reduction in mechanical vibratory systems poses challenges for distributed structures including geometric nonlinearities, mainly because of the lack of invariance of the linear subspaces. A reduction method based on direct normal form computation for large finite element (FE) models is here detailed. The main advantage resides in operating directly from the physical space, hence avoiding the computation of the complete eigenfunctions spectrum. Explicit solutions are given, thus enabling a fully non-intrusive version of the reduction method. The reduced dynamics is obtained from the normal form of the geometrically nonlinear mechanical problem, free of non-resonant monomials, and truncated to the selected master coordinates, thus making a direct link with the parametrisation of invariant manifolds. The method is fully expressed with a complex-valued formalism by detailing the homological equations in a systematic manner, and the link with real-valued expressions is established. A special emphasis is put on the treatment of second-order internal resonances and the specific case of a 1:2 resonance is made explicit. Finally, applications to large-scale models of Micro-Electro-Mechanical structures featuring 1:2 and 1:3 resonances are reported, along with considerations on computational efficiency.
△ Less
Submitted 18 March, 2021;
originally announced March 2021.
