-
Iterative method for real-time Hybrid testing: application to a cantilever beam with two interface degrees of freedom
Authors:
Alessandra Vizzaccaro,
Sandor Beregi,
David A. W. Barton,
Simon A. Neild
Abstract:
In this paper, an iterative method for real-time hybrid testing (RTHT) is proposed. The method seeks to iteratively balance the interface conditions between the physical and numerical substructures by controlling the periodic demand of the actuators. It is then suitable for RTHT of structures undergoing a periodic response, e.g. structures excited at resonance. We demonstrate the capabilities of t…
▽ More
In this paper, an iterative method for real-time hybrid testing (RTHT) is proposed. The method seeks to iteratively balance the interface conditions between the physical and numerical substructures by controlling the periodic demand of the actuators. It is then suitable for RTHT of structures undergoing a periodic response, e.g. structures excited at resonance. We demonstrate the capabilities of the method on a cantilever beam in bending motion with two degrees of freedom at the interface, which we use as a prototype for future testing of aircraft wings. We show that a number of challenges arise in these settings, such as the difficulty in measuring interface forces while controlling a continuous structure and the instability of the hybrid test for small time delays. Classical RTHT strategies could produce inaccurate or unstable outcomes, whereas the proposed method is able to attain very good interface synchronisation in a wide range of tested scenarios.
△ Less
Submitted 12 June, 2024;
originally announced June 2024.
-
Real-time hybrid testing using iterative control for periodic oscillations
Authors:
Sandor Beregi,
David A. W. Barton,
Djamel Rezgui,
Simon A. Neild
Abstract:
Real-time hybrid testing is a method in which a substructure of the system is realised experimentally and the rest numerically. The two parts interact in real time to emulate the dynamics of the full system. Such experiments however are often difficult to realise as the actuators and sensors, needed to ensure compatibility and force-equilibrium conditions at the interface, can seriously affect the…
▽ More
Real-time hybrid testing is a method in which a substructure of the system is realised experimentally and the rest numerically. The two parts interact in real time to emulate the dynamics of the full system. Such experiments however are often difficult to realise as the actuators and sensors, needed to ensure compatibility and force-equilibrium conditions at the interface, can seriously affect the predicted dynamics of the system and result in stability and fidelity issues. The traditional approach of using feedback control to overcome the additional unwanted dynamics is challenging due to the presence of an outer feedback loop, passing interface displacements or forces to the numerical substructure. We, therefore, advocate for an alternative approach, removing the problematic interface dynamics with an iterative scheme to minimise interface errors, thus, capturing the response of the true assembly. The technique is examined by hybrid testing of a bench-top four-storey building with different interface configurations, where using conventional hybrid measurement techniques is very challenging. A case where the physical part exhibits nonlinear restoring force characteristics is also considered. These tests show that the iterative approach is capable of handling even scenarios which are theoretically infeasible with feedback control.
△ Less
Submitted 3 June, 2024; v1 submitted 11 December, 2023;
originally announced December 2023.
-
Using scientific machine learning for experimental bifurcation analysis of dynamic systems
Authors:
Sandor Beregi,
David A. W. Barton,
Djamel Rezgui,
Simon A. Neild
Abstract:
Augmenting mechanistic ordinary differential equation (ODE) models with machine-learnable structures is an novel approach to create highly accurate, low-dimensional models of engineering systems incorporating both expert knowledge and reality through measurement data. Our exploratory study focuses on training universal differential equation (UDE) models for physical nonlinear dynamical systems wit…
▽ More
Augmenting mechanistic ordinary differential equation (ODE) models with machine-learnable structures is an novel approach to create highly accurate, low-dimensional models of engineering systems incorporating both expert knowledge and reality through measurement data. Our exploratory study focuses on training universal differential equation (UDE) models for physical nonlinear dynamical systems with limit cycles: an aerofoil undergoing flutter oscillations and an electrodynamic nonlinear oscillator. We consider examples where training data is generated by numerical simulations, whereas we also employ the proposed modelling concept to physical experiments allowing us to investigate problems with a wide range of complexity. To collect the training data, the method of control-based continuation is used as it captures not just the stable but also the unstable limit cycles of the observed system. This feature makes it possible to extract more information about the observed system than the open-loop approach (surveying the steady state response by parameter sweeps without using control) would allow. We use both neural networks and Gaussian processes as universal approximators alongside the mechanistic models to give a critical assessment of the accuracy and robustness of the UDE modelling approach. We also highlight the potential issues one may run into during the training procedure indicating the limits of the current modelling framework.
△ Less
Submitted 18 June, 2022; v1 submitted 22 October, 2021;
originally announced October 2021.
-
Robustness of nonlinear parameter identification in presence of process noise using control-based continuation
Authors:
Sandor Beregi,
David A. W. Barton,
Djamel Rezgui,
Simon A. Neild
Abstract:
In this study, we consider the experimentally-obtained, periodically-forced response of a nonlinear structure in the presence of process noise. Control-based continuation is used to measure both the stable and unstable periodic solutions while different levels of noise are injected into the system. Using this data, the robustness of the control-based continuation algorithm and its ability to captu…
▽ More
In this study, we consider the experimentally-obtained, periodically-forced response of a nonlinear structure in the presence of process noise. Control-based continuation is used to measure both the stable and unstable periodic solutions while different levels of noise are injected into the system. Using this data, the robustness of the control-based continuation algorithm and its ability to capture the noise-free system response is assessed by identifying the parameters of an associated Duffing-like model. We demonstrate that control-based continuation extracts system information more robustly, in the presence of a high level of noise, than open-loop parameter sweeps and so is a valuable tool for investigating nonlinear structures.
△ Less
Submitted 15 February, 2021; v1 submitted 29 January, 2020;
originally announced January 2020.
-
Numerical Continuation in Nonlinear Experiments using Local Gaussian Process Regression
Authors:
L. Renson,
J. Sieber,
D. A. W. Barton,
A. D. Shaw,
S. A. Neild
Abstract:
Control-based continuation (CBC) is a general and systematic method to probe the dynamics of nonlinear experiments. In this paper, CBC is combined with a novel continuation algorithm that is robust to experimental noise and enables the tracking of geometric features of the response surface such as folds. The method uses Gaussian process regression to create a local model of the response surface on…
▽ More
Control-based continuation (CBC) is a general and systematic method to probe the dynamics of nonlinear experiments. In this paper, CBC is combined with a novel continuation algorithm that is robust to experimental noise and enables the tracking of geometric features of the response surface such as folds. The method uses Gaussian process regression to create a local model of the response surface on which standard numerical continuation algorithms can be applied. The local model evolves as continuation explores the experimental parameter space, exploiting previously captured data to actively select the next data points to collect such that they maximise the potential information gain about the feature of interest. The method is demonstrated experimentally on a nonlinear structure featuring harmonically-coupled modes. Fold points present in the response surface of the system are followed and reveal the presence of an isola, i.e. a branch of periodic responses detached from the main resonance peak.
△ Less
Submitted 9 May, 2019; v1 submitted 21 January, 2019;
originally announced January 2019.
-
On the Geometrically Exact Low Order Modelling of a Flexible Beam: Formulation and Numerical Tests
Authors:
C. Howcroft,
R. G. Cook,
S. A. Neild,
M. H. Lowenberg,
J. E. Cooper,
E. B. Coetzee
Abstract:
This paper proposes a low order geometrically exact flexible beam formulation based on the utilisation of generic beam shape functions to approximate distributed kinematic properties of the deformed structure. The proposed nonlinear beam shapes approach is in contrast to the majority of geometrically nonlinear treatments in the literature in which element based --- and hence high order --- discret…
▽ More
This paper proposes a low order geometrically exact flexible beam formulation based on the utilisation of generic beam shape functions to approximate distributed kinematic properties of the deformed structure. The proposed nonlinear beam shapes approach is in contrast to the majority of geometrically nonlinear treatments in the literature in which element based --- and hence high order --- discretisations are adopted. The kinematic quantities approximated specifically pertain to shear and extensional gradients as well as local orientation parameters based on an arbitrary set of globally referenced attitude parameters. In developing the dynamic equations of motion, an Euler angle parameterisation is selected as it is found to yield fast computational performance. The resulting dynamic formulation is closed using an example shape function set satisfying the single generic kinematic constraint. The formulation is demonstrated via its application to the modelling of a series of static and dynamic test cases of both simple and non-prismatic structures; the simulated results are verified using MSC Nastran and an element-based intrinsic beam formulation. Through these examples it is shown that the nonlinear beam shapes approach is able to accurately capture the beam behaviour with a very minimal number of system states.
△ Less
Submitted 26 June, 2018;
originally announced June 2018.
-
Force appropriation of nonlinear structures
Authors:
L. Renson,
T. L. Hill,
D. A. Ehrhardt,
D. A. W. Barton,
S. A. Neild
Abstract:
Nonlinear normal modes (NNMs) are widely used as a tool for developing mathematical models of nonlinear structures and understanding their dynamics. NNMs can be identified experimentally through a phase quadrature condition between the system response and the applied excitation. This paper demonstrates that this commonly-used quadrature condition can give results that are significantly different f…
▽ More
Nonlinear normal modes (NNMs) are widely used as a tool for developing mathematical models of nonlinear structures and understanding their dynamics. NNMs can be identified experimentally through a phase quadrature condition between the system response and the applied excitation. This paper demonstrates that this commonly-used quadrature condition can give results that are significantly different from the true NNM, in particular when the excitation applied to the system is limited to one input force, as is frequently used in practice. The system studied is a clamped-clamped cross beam with two closely-spaced modes. This paper shows that the regions where the quadrature condition is (in)accurate can be qualitatively captured by analysing transfer of energy between the modes of the system, leading to a discussion of the appropriate number of input forces and their locations across the structure.
△ Less
Submitted 2 January, 2018;
originally announced January 2018.
