-
La production de nitrites lors de la dénitrification des eaux usées par biofiltration - Stratégie de contrôle et de réduction des concentrations résiduelles
Authors:
Vincent Rocher,
Cédric Join,
Stéphane Mottelet,
Jean Bernier,
Sabrina Rechdaoui-Guérin,
Sam Azimi,
Paul Lessard,
André Pauss,
Michel Fliess
Abstract:
The recent popularity of post-denitrification processes in the greater Paris area wastewater treatment plants has caused a resurgence of the presence of nitrite in the Seine river. Controlling the production of nitrite during the post-denitrification has thus become a major technical issue. Research studies have been led in the MOCOPEE program (www.mocopee.com) to better understand the underlying…
▽ More
The recent popularity of post-denitrification processes in the greater Paris area wastewater treatment plants has caused a resurgence of the presence of nitrite in the Seine river. Controlling the production of nitrite during the post-denitrification has thus become a major technical issue. Research studies have been led in the MOCOPEE program (www.mocopee.com) to better understand the underlying mechanisms behind the production of nitrite during wastewater denitrification and to develop technical tools (measurement and control solutions) to assist on-site reductions of nitrite productions. Prior studies have shown that typical methanol dosage strategies produce a varying carbon-to-nitrogen ratio in the reactor, which in turn leads to unstable nitrite concentrations in the effluent. The possibility of adding a model-free control to the actual classical dosage strategy has thus been tested on the SimBio model, which simulates the behavior of wastewater biofilters. The corresponding "intelligent" feedback loop, which is using effluent nitrite concentrations, compensates the classical strategy only when needed. Simulation results show a clear improvement in average nitrite concentration level and level stability in the effluent, without a notable overcost in methanol.
△ Less
Submitted 28 November, 2017;
originally announced November 2017.
-
A simple and efficient feedback control strategy for wastewater denitrification
Authors:
Cédric Join,
Jean Bernier,
Stéphane Mottelet,
Michel Fliess,
Sabrina Rechdaoui-Guérin,
Sam Azimi,
Vincent Rocher
Abstract:
Due to severe mathematical modeling and calibration difficulties open-loop feedforward control is mainly employed today for wastewater denitrification, which is a key ecological issue. In order to improve the resulting poor performances a new model-free control setting and its corresponding "intelligent" controller are introduced. The pitfall of regulating two output variables via a single input v…
▽ More
Due to severe mathematical modeling and calibration difficulties open-loop feedforward control is mainly employed today for wastewater denitrification, which is a key ecological issue. In order to improve the resulting poor performances a new model-free control setting and its corresponding "intelligent" controller are introduced. The pitfall of regulating two output variables via a single input variable is overcome by introducing also an open-loop knowledge-based control deduced from the plant behavior. Several convincing computer simulations are presented and discussed.
△ Less
Submitted 15 March, 2017;
originally announced March 2017.
-
Metabolic Flux Analysis in Isotope Labeling Experiments using the Adjoint Approach
Authors:
Stéphane Mottelet,
Gil Gaullier,
Georges Sadaka
Abstract:
Comprehension of metabolic pathways is considerably enhanced by metabolic flux analysis (MFA-ILE) in isotope labeling experiments. The balance equations are given by hundreds of algebraic (stationary MFA) or ordinary differential equations (nonstationary MFA), and reducing the number of operations is therefore a crucial part of reducing the computation cost. The main bottleneck for deterministic a…
▽ More
Comprehension of metabolic pathways is considerably enhanced by metabolic flux analysis (MFA-ILE) in isotope labeling experiments. The balance equations are given by hundreds of algebraic (stationary MFA) or ordinary differential equations (nonstationary MFA), and reducing the number of operations is therefore a crucial part of reducing the computation cost. The main bottleneck for deterministic algorithms is the computation of derivatives, particularly for nonstationary MFA. In this article we explain how the overall identification process may be speeded up by using the adjoint approach to compute the gradient of the residual sum of squares. The proposed approach shows significant improvements in terms of complexity and computation time when it is compared with the usual (direct) approach. Numerical results are obtained for the central metabolic pathways of Escherichia coli and are validated against reference software in the stationary case. The methods and algorithms described in this paper are included in the sysmetab software package distributed under an Open Source license at http://forge.scilab.org/index.php/p/sysmetab/.
△ Less
Submitted 18 January, 2016;
originally announced January 2016.
-
Fast computation of gradient and sentitivity in 13C metabolic flux analysis instationary experiments using the adjoint method
Authors:
Stéphane Mottelet
Abstract:
Metabolic flux analysis using 13C labeled substrates is an important tool for metabolic engineering. Although it has now been evolving for more than ten years, metabolic flux analysis has still not reached the limits of its application. First and foremost, there is only one reference software for the analysis and identification of metabolic fluxes using stationnary carbon labeling experiments, whi…
▽ More
Metabolic flux analysis using 13C labeled substrates is an important tool for metabolic engineering. Although it has now been evolving for more than ten years, metabolic flux analysis has still not reached the limits of its application. First and foremost, there is only one reference software for the analysis and identification of metabolic fluxes using stationnary carbon labeling experiments, which is closed-source. Moreover, this software lacks connections with the new standards of systems biology community, for example the Systems Biology Markup Language, which allows to describe arbitrary large metabolic networks. The first part of this paper, after recalling all the mathematics involved in the mathematical problem of flux identification in the case of multiple experiments (state equations, regularized cost function, explicit computation of the gradient) concentrates on the problem of specific automatic generation of scripts (Matlab or Scilab) implementing the numerical resolution. To this purpose, we will describe the architecture of the software chain implementing the transformation from the XML file describing the metaboling network and the carbon transitions to the final collection of scripts computing, for example, the exact gradient of the regularized least-squares cost function and the output sensitivities. In the unstationnary case the adjoint state method is used to speed up computations.
△ Less
Submitted 22 June, 2012;
originally announced June 2012.
-
Smart depth of field optimization applied to a robotised view camera
Authors:
Stéphane Mottelet,
Luc de Saint Germain,
Olivier Mondin
Abstract:
The great flexibility of a view camera allows to take high quality photographs that would not be possible any other way. But making a given object into focus is a long and tedious task, although the underlying laws are well known. This paper presents the result of a project which has lead to the design of a computer controlled view camera and to its companion software. Thanks to the high precision…
▽ More
The great flexibility of a view camera allows to take high quality photographs that would not be possible any other way. But making a given object into focus is a long and tedious task, although the underlying laws are well known. This paper presents the result of a project which has lead to the design of a computer controlled view camera and to its companion software. Thanks to the high precision machining of its components, and to the known optical parameters of lenses and sensor, we have been able to consider a reliable mathematical model of the view camera, allowing the acquisition of 3D coordinates to build a geometrical model of the object. Then many problems can be solved, e.g. minimizing the f-number while maintaining the object within the depth of field, which takes the form of a constrained optimization problem. All optimization algorithms have been validated on a virtual view camera before implementation on the prototype
△ Less
Submitted 18 April, 2011; v1 submitted 31 January, 2011;
originally announced February 2011.
-
Semiparametric estimation of a two-component mixture model
Authors:
Laurent Bordes,
Stéphane Mottelet,
Pierre Vandekerkhove
Abstract:
Suppose that univariate data are drawn from a mixture of two distributions that are equal up to a shift parameter. Such a model is known to be nonidentifiable from a nonparametric viewpoint. However, if we assume that the unknown mixed distribution is symmetric, we obtain the identifiability of this model, which is then defined by four unknown parameters: the mixing proportion, two location para…
▽ More
Suppose that univariate data are drawn from a mixture of two distributions that are equal up to a shift parameter. Such a model is known to be nonidentifiable from a nonparametric viewpoint. However, if we assume that the unknown mixed distribution is symmetric, we obtain the identifiability of this model, which is then defined by four unknown parameters: the mixing proportion, two location parameters and the cumulative distribution function of the symmetric mixed distribution. We propose estimators for these four parameters when no training data is available. Our estimators are shown to be strongly consistent under mild regularity assumptions and their convergence rates are studied. Their finite-sample properties are illustrated by a Monte Carlo study and our method is applied to real data.
△ Less
Submitted 31 July, 2006;
originally announced July 2006.
