-
A Two-Step Formulation of Maxwell's Equations Using Generalized Tree-Cotree Gauges for Low-Frequency-Stability
Authors:
Leon Herles,
Mario Mally,
Jörg Ostrowski,
Sebastian Schöps,
Melina Merkel
Abstract:
This paper presents a new low-frequency stabilization for a two-step formulation solving the full set of Maxwell's equations. The formulation is based on a electric scalar and magnetic vector potential equation using the electroquasistatic problem as gauge condition. The proposed stabilization technique consists of an adequate frequency scaling for the electroquasistatic problem, and a tree-cotree…
▽ More
This paper presents a new low-frequency stabilization for a two-step formulation solving the full set of Maxwell's equations. The formulation is based on a electric scalar and magnetic vector potential equation using the electroquasistatic problem as gauge condition. The proposed stabilization technique consists of an adequate frequency scaling for the electroquasistatic problem, and a tree-cotree decomposition of the magnetic vector potential such that its divergence remains consistent with the partial decoupling of the magnetic and electric potentials. The paper discusses two variants and demonstrates the effectiveness by a few computational examples.
△ Less
Submitted 19 February, 2025;
originally announced February 2025.
-
An Air-Gap Element for the Isogeometric Space-Time-Simulation of Electric Machines
Authors:
Michael Reichelt,
Michael Wiesheu,
Melina Merkel,
Sebastian Schöps,
Olaf Steinbach
Abstract:
Space-time methods promise more efficient time-domain simulations, in particular of electrical machines. However, most approaches require the motion to be known in advance so that it can be included in the space-time mesh. To overcome this problem, this paper proposes to use the well-known air-gap element for the rotor-stator coupling of an isogeometric machine model. First, we derive the solution…
▽ More
Space-time methods promise more efficient time-domain simulations, in particular of electrical machines. However, most approaches require the motion to be known in advance so that it can be included in the space-time mesh. To overcome this problem, this paper proposes to use the well-known air-gap element for the rotor-stator coupling of an isogeometric machine model. First, we derive the solution in the air-gap region and then employ it to couple the rotor and stator. This coupling is angle dependent and we show how to efficiently update the coupling matrices to a different angle, avoiding expensive quadrature. Finally, the resulting time-dependent problem is solved in a space-time setting. The spatial discretization using isogeometric analysis is particularly suitable for coupling via the air-gap element, as NURBS can exactly represent the geometry of the air-gap. Furthermore, the model including the air-gap element can be seamlessly transferred to the space-time setting. However, the air-gap element is well known in the literature. The originality of this work is the application to isogeometric analysis and space-time.
△ Less
Submitted 27 January, 2025;
originally announced January 2025.
-
On Domain Decomposition for Magnetostatic Problems in 3D
Authors:
Mario Mally,
Melina Merkel
Abstract:
The simulation of three dimensional magnetostatic problems plays an important role, for example when simulating synchronous electric machines. Building on prior work that developed a domain decomposition algorithm using isogeometric analysis, this paper extends the method to support subdomains composed of multiple patches. This extension enables load-balancing across available CPUs, facilitated by…
▽ More
The simulation of three dimensional magnetostatic problems plays an important role, for example when simulating synchronous electric machines. Building on prior work that developed a domain decomposition algorithm using isogeometric analysis, this paper extends the method to support subdomains composed of multiple patches. This extension enables load-balancing across available CPUs, facilitated by graph partitioning tools such as METIS. The proposed approach enhances scalability and flexibility, making it suitable for large-scale simulations in diverse industrial contexts.
△ Less
Submitted 8 January, 2025;
originally announced January 2025.
-
Deformations of calibrated subbundles in noncompact manifolds of special holonomy via twisting by special sections
Authors:
Romy Marie Merkel
Abstract:
We study special Lagrangian submanifolds in the Calabi-Yau manifold $T^*S^n$ with the Stenzel metric, as well as calibrated submanifolds in the $\text{G}_2$-manifold $Λ^2_-(T^*X)$ $(X^4 = S^4, \mathbb{CP}^2)$ and the $\text{Spin}(7)$-manifold $\$_{\!-}(S^4)…
▽ More
We study special Lagrangian submanifolds in the Calabi-Yau manifold $T^*S^n$ with the Stenzel metric, as well as calibrated submanifolds in the $\text{G}_2$-manifold $Λ^2_-(T^*X)$ $(X^4 = S^4, \mathbb{CP}^2)$ and the $\text{Spin}(7)$-manifold $\$_{\!-}(S^4)$, both equipped with the Bryant-Salamon metrics. We twist naturally defined calibrated subbundles by sections of the complementary bundles and derive conditions for the deformations to be calibrated. We find that twisting the conormal bundle $N^*L$ of $L^q \subset S^n$ by a $1$-form $μ\in Ω^1(L)$ does not provide any new examples because the Lagrangian condition requires $μ$ to vanish. Furthermore, we prove that the twisted bundles in the $\text{G}_2$- and $\text{Spin}(7)$-manifolds are associative (coassociative) and Cayley, respectively, if the base is minimal (negative superminimal) and the section holomorphic (parallel). This demonstrates that the (co-)associative and Cayley subbundles allow deformations destroying the linear structure of the fiber, while the base space remains of the same type after twisting. While the results for the two spaces of exceptional holonomy are in line with the findings in Euclidean spaces established in arXiv:1108.6090, the special Lagrangian bundle construction in $T^*S^n$ is much more rigid than in the case of $T^*\mathbb{R}^n$.
△ Less
Submitted 26 November, 2024;
originally announced November 2024.
-
Tree-Cotree-Based Tearing and Interconnecting for 3D Magnetostatics: A Dual-Primal Approach
Authors:
Mario Mally,
Bernard Kapidani,
Melina Merkel,
Sebastian Schöps,
Rafael Vázquez
Abstract:
The simulation of electromagnetic devices with complex geometries and large-scale discrete systems benefits from advanced computational methods like IsoGeometric Analysis and Domain Decomposition. In this paper, we employ both concepts in an Isogeometric Tearing and Interconnecting method to enable the use of parallel computations for magnetostatic problems. We address the underlying non-uniquenes…
▽ More
The simulation of electromagnetic devices with complex geometries and large-scale discrete systems benefits from advanced computational methods like IsoGeometric Analysis and Domain Decomposition. In this paper, we employ both concepts in an Isogeometric Tearing and Interconnecting method to enable the use of parallel computations for magnetostatic problems. We address the underlying non-uniqueness by using a graph-theoretic approach, the tree-cotree decomposition. The classical tree-cotree gauging is adapted to be feasible for parallelization, which requires that all local subsystems are uniquely solvable. Our contribution consists of an explicit algorithm for constructing compatible trees and combining it with a dual-primal approach to enable parallelization. The correctness of the proposed approach is proved and verified by numerical experiments, showing its accuracy, scalability and optimal convergence.
△ Less
Submitted 7 January, 2025; v1 submitted 31 July, 2024;
originally announced July 2024.
-
Spline-Based Rotor and Stator Optimization of a Permanent Magnet Synchronous Motor
Authors:
Michael Wiesheu,
Theodor Komann,
Melina Merkel,
Sebastian Schöps,
Stefan Ulbrich,
Idoia Cortes Garcia
Abstract:
This work features the optimization of a Permanent Magnet Synchronous Motor using 2D nonlinear simulations in an Isogeometric Analysis framework. The rotor and stator designs are optimized for both geometric parameters and surface shapes via modifications of control points. The scaling laws for magnetism are employed to allow for axial and radial scaling, enabling a thorough optimization of all cr…
▽ More
This work features the optimization of a Permanent Magnet Synchronous Motor using 2D nonlinear simulations in an Isogeometric Analysis framework. The rotor and stator designs are optimized for both geometric parameters and surface shapes via modifications of control points. The scaling laws for magnetism are employed to allow for axial and radial scaling, enabling a thorough optimization of all critical machine parameters for multiple operating points. The process is carried out in a gradient-based fashion with the objectives of lowering motor material cost, torque ripple and losses. It is shown that the optimization can be efficiently conducted for many optimization variables and all objective values can be reduced.
△ Less
Submitted 29 February, 2024;
originally announced February 2024.
-
Combined Parameter and Shape Optimization of Electric Machines with Isogeometric Analysis
Authors:
Michael Wiesheu,
Theodor Komann,
Melina Merkel,
Sebastian Schöps,
Stefan Ulbrich,
Idoia Cortes Garcia
Abstract:
In structural optimization, both parameters and shape are relevant for the model performance. Yet, conventional optimization techniques usually consider either parameters or the shape separately. This work addresses this problem by proposing a simple yet powerful approach to combine parameter and shape optimization in a framework using Isogeometric Analysis (IGA). The optimization employs sensitiv…
▽ More
In structural optimization, both parameters and shape are relevant for the model performance. Yet, conventional optimization techniques usually consider either parameters or the shape separately. This work addresses this problem by proposing a simple yet powerful approach to combine parameter and shape optimization in a framework using Isogeometric Analysis (IGA). The optimization employs sensitivity analysis by determining the gradients of an objective function with respect to parameters and control points that represent the geometry. The gradients with respect to the control points are calculated in an analytical way using the adjoint method, which enables straightforward shape optimization by altering of these control points. Given that a change in a single geometry parameter corresponds to modifications in multiple control points, the chain rule is employed to obtain the gradient with respect to the parameters in an efficient semi-analytical way. The presented method is exemplarily applied to nonlinear 2D magnetostatic simulations featuring a permanent magnet synchronous motor and compared to designs, which were optimized using parameter and shape optimization separately. It is numerically shown that the permanent magnet mass can be reduced and the torque ripple can be eliminated almost completely by simultaneously adjusting rotor parameters and shape. The approach allows for novel designs to be created with the potential to reduce the optimization time substantially.
△ Less
Submitted 17 March, 2025; v1 submitted 10 November, 2023;
originally announced November 2023.
-
Arbitrary order spline representation of cohomology generators for isogeometric analysis of eddy current problems
Authors:
Bernard Kapidani,
Melina Merkel,
Sebastian Schöps,
Rafael Vázquez
Abstract:
The eddy current problem has many relevant practical applications in science, ranging from non-destructive testing to magnetic confinement of plasma in fusion reactors. It arises when electrical conductors are immersed in an external time-varying magnetic field operating at frequencies for which electromagnetic wave propagation effects can be neglected.
Popular formulations of the eddy current p…
▽ More
The eddy current problem has many relevant practical applications in science, ranging from non-destructive testing to magnetic confinement of plasma in fusion reactors. It arises when electrical conductors are immersed in an external time-varying magnetic field operating at frequencies for which electromagnetic wave propagation effects can be neglected.
Popular formulations of the eddy current problem either use the magnetic vector potential or the magnetic scalar potential. They have individual advantages and disadvantages. One challenge is related to differential geometry: Scalar potential based formulations run into trouble when conductors are present in non-trivial topology, as approximation spaces must be then augmented with generators of the first cohomology group of the non-conducting domain.
For all existing algorithms based on lowest order methods it is assumed that the extension of the graph-based algorithms to high-order approximations requires hierarchical bases for the curl-conforming discrete spaces. However, building on insight on de Rham complexes approximation with splines, we will show in the present submission that the hierarchical basis condition is not necessary. Algorithms based on spanning tree techniques can instead be adapted to work on an underlying hexahedral mesh arising from isomorphisms between spline spaces of differential forms and de Rham complexes on an auxiliary control mesh.
△ Less
Submitted 22 October, 2023;
originally announced October 2023.
-
Low-Frequency Stabilization of Dielectric Simulation Problems with Conductors and Insulators
Authors:
Devin Balian,
Melina Merkel,
Jörg Ostrowski,
Herbert De Gersem,
Sebastian Schöps
Abstract:
When simulating resistive-capacitive circuits or electroquasistatic problems where conductors and insulators coexist, one observes that large time steps or low frequencies lead to numerical instabilities, which are related to the condition number of the system matrix. Here, we propose several stable formulations by scaling the equation systems. This enables a reliable calculation of solutions for…
▽ More
When simulating resistive-capacitive circuits or electroquasistatic problems where conductors and insulators coexist, one observes that large time steps or low frequencies lead to numerical instabilities, which are related to the condition number of the system matrix. Here, we propose several stable formulations by scaling the equation systems. This enables a reliable calculation of solutions for very low frequencies (even for the static case), or large time steps. Numerical experiments underline the findings.
△ Less
Submitted 1 February, 2023;
originally announced February 2023.
-
On the computation of analytic sensitivities of eigenpairs in isogeometric analysis
Authors:
Anna Ziegler,
Melina Merkel,
Peter Gangl,
Sebastian Schöps
Abstract:
The eigenmodes of resonating structures, e.g., electromagnetic cavities, are sensitive to deformations of their shape. In order to compute the sensitivities of the eigenpair with respect to a scalar parameter, we state the Laplacian and Maxwellian eigenvalue problems and discretize the models using isogeometric analysis. Since we require the derivatives of the system matrices, we differentiate the…
▽ More
The eigenmodes of resonating structures, e.g., electromagnetic cavities, are sensitive to deformations of their shape. In order to compute the sensitivities of the eigenpair with respect to a scalar parameter, we state the Laplacian and Maxwellian eigenvalue problems and discretize the models using isogeometric analysis. Since we require the derivatives of the system matrices, we differentiate the system matrices for each setting considering the appropriate function spaces for geometry and solution. This approach allows for a straightforward computation of arbitrary higher order sensitivities in a closed-form. In our work, we demonstrate the application in a setting of small geometric deformations, e.g., for the investigation of manufacturing uncertainties of electromagnetic cavities, as well as in an eigenvalue tracking along a shape morphing.
△ Less
Submitted 20 December, 2022;
originally announced December 2022.
-
How to Build the Optimal Magnet Assembly for Magnetocaloric Cooling: Structural Optimization with Isogeometric Analysis
Authors:
Michael Wiesheu,
Melina Merkel,
Tim Sittig,
Dimitri Benke,
Max Fries,
Sebastian Schöps,
Oliver Weeger,
Idoia Cortes Garcia
Abstract:
In the search for more efficient and less environmentally harmful cooling technologies, the field of magnetocalorics is considered a promising alternative. To generate cooling spans, rotating permanent magnet assemblies are used to cyclically magnetize and demagnetize magnetocaloric materials, which change their temperature under the application of a magnetic field. In this work, an axial rotary p…
▽ More
In the search for more efficient and less environmentally harmful cooling technologies, the field of magnetocalorics is considered a promising alternative. To generate cooling spans, rotating permanent magnet assemblies are used to cyclically magnetize and demagnetize magnetocaloric materials, which change their temperature under the application of a magnetic field. In this work, an axial rotary permanent magnet assembly, aimed for commercialization, is computationally designed using topology and shape optimization. This is efficiently facilitated in an isogeometric analysis framework, where harmonic mortaring is applied to couple the rotating rotor-stator system of the multipatch model. Inner, outer and co-rotating assemblies are compared and optimized designs for different magnet masses are determined. These simulations are used to homogenize the magnetic flux density in the magnetocaloric material. The resulting torque is analyzed for different geometric parameters. Additionally, the influence of anisotropy in the active magnetic regenerators is studied in order to guide the magnetic flux. Different examples are analyzed and classified to find an optimal magnet assembly for magnetocaloric cooling.
△ Less
Submitted 2 May, 2023; v1 submitted 13 December, 2022;
originally announced December 2022.
-
Torque Computation with the Isogeometric Mortar Method for the Simulation of Electric Machines
Authors:
Melina Merkel,
Bernard Kapidani,
Sebastian Schöps,
Rafael Vázquez
Abstract:
In this work isogeometric mortaring is used for the simulation of a six pole permanent magnet synchronous machine. Isogeometric mortaring is especially well suited for the efficient computation of rotating electric machines as it allows for an exact geometry representation for arbitrary rotation angles without the need of remeshing. The appropriate B-spline spaces needed for the solution of Maxwel…
▽ More
In this work isogeometric mortaring is used for the simulation of a six pole permanent magnet synchronous machine. Isogeometric mortaring is especially well suited for the efficient computation of rotating electric machines as it allows for an exact geometry representation for arbitrary rotation angles without the need of remeshing. The appropriate B-spline spaces needed for the solution of Maxwell's equations and the corresponding mortar spaces are introduced. Unlike in classical finite element methods their construction is straightforward in the isogeometric case. The torque in the machine is computed using two different methods, i.e., Arkkio's method and by using the Lagrange multipliers from the mortaring.
△ Less
Submitted 11 February, 2022;
originally announced February 2022.
-
On torque computation in electric machine simulation by harmonic mortar methods
Authors:
Herbert Egger,
Mané Harutyunyan,
Richard Löscher,
Melina Merkel,
Sebastian Schöps
Abstract:
The use of trigonometric polynomials as Lagrange multipliers in the harmonic mortar method enables an efficient and elegant treatment of relative motion in the stator-rotor coupling of electric machine simulation. Explicit formulas for the torque computation are derived by energetic considerations, and their realization by harmonic mortar finite element and isogemetric analysis discretizations is…
▽ More
The use of trigonometric polynomials as Lagrange multipliers in the harmonic mortar method enables an efficient and elegant treatment of relative motion in the stator-rotor coupling of electric machine simulation. Explicit formulas for the torque computation are derived by energetic considerations, and their realization by harmonic mortar finite element and isogemetric analysis discretizations is discussed. Numerical tests are presented to illustrate the theoretical results and demonstrate the potential of harmonic mortar methods for the evaluation of torque ripples.
△ Less
Submitted 13 December, 2021; v1 submitted 10 December, 2021;
originally announced December 2021.
-
Tree-Cotree Decomposition of Isogeometric Mortared Spaces in H(curl) on Multi-Patch Domains
Authors:
Bernard Kapidani,
Melina Merkel,
Sebastian Schöps,
Rafael Vázquez
Abstract:
When applying isogeometric analysis to engineering problems, one often deals with multi-patch spline spaces that have incompatible discretisations, e.g. in the case of moving objects. In such cases mortaring has been shown to be advantageous. This contribution discusses the appropriate B-spline spaces needed for the solution of Maxwell's equations in the functions space H(curl) and the correspondi…
▽ More
When applying isogeometric analysis to engineering problems, one often deals with multi-patch spline spaces that have incompatible discretisations, e.g. in the case of moving objects. In such cases mortaring has been shown to be advantageous. This contribution discusses the appropriate B-spline spaces needed for the solution of Maxwell's equations in the functions space H(curl) and the corresponding mortar spaces. The main contribution of this paper is to show that in formulations requiring gauging, as in the vector potential formulation of magnetostatic equations, one can remove the discrete kernel subspace from the mortared spaces by the graph-theoretical concept of a tree-cotree decomposition. The tree-cotree decomposition is done based on the control mesh, it works for non-contractible domains, and it can be straightforwardly applied independently of the degree of the B-spline bases. Finally, the simulation workflow is demonstrated using a realistic model of a rotating permanent magnet synchronous machine.
△ Less
Submitted 29 October, 2021;
originally announced October 2021.
-
On the stability of harmonic mortar methods with application to electric machines
Authors:
Herbert Egger,
Mané Harutyunyan,
Melina Merkel,
Sebastian Schöps
Abstract:
Harmonic stator-rotor coupling offers a promising approach for the interconnection of rotating subsystems in the simulation of electric machines. This paper studies the stability of discretization schemes based on harmonic coupling in the framework of mortar methods for Poisson-like problems. A general criterion is derived that allows to ensure the relevant inf-sup stability condition for a variet…
▽ More
Harmonic stator-rotor coupling offers a promising approach for the interconnection of rotating subsystems in the simulation of electric machines. This paper studies the stability of discretization schemes based on harmonic coupling in the framework of mortar methods for Poisson-like problems. A general criterion is derived that allows to ensure the relevant inf-sup stability condition for a variety of specific discretization approaches, including finite-element methods and isogeometric analysis with harmonic mortar coupling. The validity and sharpness of the theoretical results is demonstrated by numerical tests.
△ Less
Submitted 25 May, 2020;
originally announced May 2020.
-
ParaExp using Leapfrog as Integrator for High-Frequency Electromagnetic Simulations
Authors:
Melina Merkel,
Innocent Niyonzima,
Sebastian Schöps
Abstract:
Recently, ParaExp was proposed for the time integration of linear hyperbolic problems. It splits the time interval of interest into sub-intervals and computes the solution on each sub-interval in parallel. The overall solution is decomposed into a particular solution defined on each sub-interval with zero initial conditions and a homogeneous solution propagated by the matrix exponential applied to…
▽ More
Recently, ParaExp was proposed for the time integration of linear hyperbolic problems. It splits the time interval of interest into sub-intervals and computes the solution on each sub-interval in parallel. The overall solution is decomposed into a particular solution defined on each sub-interval with zero initial conditions and a homogeneous solution propagated by the matrix exponential applied to the initial conditions. The efficiency of the method depends on fast approximations of this matrix exponential based on recent results from numerical linear algebra. This paper deals with the application of ParaExp in combination with Leapfrog to electromagnetic wave problems in time-domain. Numerical tests are carried out for a simple toy problem and a realistic spiral inductor model discretized by the Finite Integration Technique.
△ Less
Submitted 28 May, 2017; v1 submitted 22 May, 2017;
originally announced May 2017.
-
An Application of ParaExp to Electromagnetic Wave Problems
Authors:
Melina Merkel,
Innocent Niyonzima,
Sebastian Schöps
Abstract:
Recently, ParaExp was proposed for the time integration of hyperbolic problems. It splits the time interval of interest into sub-intervals and computes the solution on each sub-interval in parallel. The overall solution is decomposed into a particular solution defined on each sub-interval with zero initial conditions and a homogeneous solution propagated by the matrix exponential applied to the in…
▽ More
Recently, ParaExp was proposed for the time integration of hyperbolic problems. It splits the time interval of interest into sub-intervals and computes the solution on each sub-interval in parallel. The overall solution is decomposed into a particular solution defined on each sub-interval with zero initial conditions and a homogeneous solution propagated by the matrix exponential applied to the initial conditions. The efficiency of the method results from fast approximations of this matrix exponential using tools from linear algebra. This paper deals with the application of ParaExp to electromagnetic wave problems in time-domain. Numerical tests are carried out for an electric circuit and an electromagnetic wave problem discretized by the Finite Integration Technique.
△ Less
Submitted 16 October, 2016; v1 submitted 1 July, 2016;
originally announced July 2016.
