Showing 1–12 of 12 results for author: Mathis, H

Reducing Simulation Effort for RIS Optimization using an Efficient Far-Field Approximation

Authors: Hans-Dieter Lang, Michel A. Nyffenegger, Heinz Mathis, Xingqi Zhang

Abstract: Optimization of Reconfigurable Intelligent Surfaces (RIS) via a previously introduced method is effective, but time-consuming, because multiport impedance or scatter matrices are required for each transmitter and receiver position, which generally must be obtained through full-wave simulation. Herein, a simple and efficient far-field approximation is introduced, to extrapolate scatter matrices for… ▽ More Optimization of Reconfigurable Intelligent Surfaces (RIS) via a previously introduced method is effective, but time-consuming, because multiport impedance or scatter matrices are required for each transmitter and receiver position, which generally must be obtained through full-wave simulation. Herein, a simple and efficient far-field approximation is introduced, to extrapolate scatter matrices for arbitrary receiver and transmitter positions from only a single simulation while still maintaining high accuracy suitable for optimization purposes. This is demonstrated through comparisons of the optimized capacitance values and further supported by empirical measurements. △ Less

Submitted 30 January, 2025; originally announced January 2025.

Comments: 2024 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting (AP-S/INC-USNC-URSI), Firenze, Italy, 2024, pp. 1585-1586

Validating Convex Optimization of Reconfigurable Intelligent Surfaces via Measurements

Authors: Hans-Dieter Lang, Michel A. Nyffenegger, Sven Keller, Patrik Stöckli, Nathan A. Hoffman, Heinz Mathis, Xingqi Zhang

Abstract: Reconfigurable Intelligent Surfaces (RISs) can be designed in various ways. A previously proposed semidefinite relaxation-based optimization method for maximizing power transfer efficiency showed promise, but earlier results were only theoretical. This paper evaluates a small RIS at 3.55GHz, the center of the 5G band "n78", for practical verification of this method. The presented results not only… ▽ More Reconfigurable Intelligent Surfaces (RISs) can be designed in various ways. A previously proposed semidefinite relaxation-based optimization method for maximizing power transfer efficiency showed promise, but earlier results were only theoretical. This paper evaluates a small RIS at 3.55GHz, the center of the 5G band "n78", for practical verification of this method. The presented results not only empirically confirm the desired performance of the optimized RIS, but also affirm the optimality of the resulting reactance values. Additionally, this paper discusses several practical aspects of RIS design and measurement, such as the operation of varactor diodes and time gating to omit the direct line-of-sight (LOS) path. △ Less

Submitted 19 September, 2024; originally announced September 2024.

Comments: 5 pages, conference

Relative Entropy for the Numerical Diffusive Limit of the Linear Jin-Xin System

Authors: Marianne Bessemoulin-Chatard, Hélène Mathis

Abstract: This paper deals with the diffusive limit of the Jin and Xin model and its approximation by an asymptotic preserving finite volume scheme. At the continuous level, we determine a convergence rate to the diffusive limit by means of a relative entropy method. Considering a semi-discrete approximation (discrete in space and continuous in time), we adapt the method to this semi-discrete framework and… ▽ More This paper deals with the diffusive limit of the Jin and Xin model and its approximation by an asymptotic preserving finite volume scheme. At the continuous level, we determine a convergence rate to the diffusive limit by means of a relative entropy method. Considering a semi-discrete approximation (discrete in space and continuous in time), we adapt the method to this semi-discrete framework and establish that the approximated solutions converge towards the discrete convection-diffusion limit with the same convergence rate. △ Less

Submitted 5 June, 2024; originally announced June 2024.

Derivation of a two-phase flow model accounting for surface tension

Authors: Hélène Mathis

Abstract: This paper addresses the derivation of a two-phase flow model accounting for surface tension effects, by means of the Stationary Action Principle (SAP). The Lagrangian functional, defining the Action, is composed of a kinetic energy, accounting for interface feature, and a potential energy. The key element of the model lies on the assumption that the interface separating the two phases admits its… ▽ More This paper addresses the derivation of a two-phase flow model accounting for surface tension effects, by means of the Stationary Action Principle (SAP). The Lagrangian functional, defining the Action, is composed of a kinetic energy, accounting for interface feature, and a potential energy. The key element of the model lies on the assumption that the interface separating the two phases admits its own internal energy, satisfying a Gibbs form including both surface tension and interfacial area. Thus surface tension is taken into account both in the potential energy and the kinetic one which define the Lagrangian functional. Applying the SAP allows to build a set of partial differential equations modelling the dynamics of the two-phase flow. It includes evolution equations of the volume fraction and the interfacial area, accounting for mechanical relaxation terms. The final model is shown to be well posed (hyperbolicity, Lax entropy). △ Less

Submitted 4 December, 2023; originally announced December 2023.

Investigating Sparse Reconfigurable Intelligent Surfaces (SRIS) via Maximum Power Transfer Efficiency Method Based on Convex Relaxation

Authors: Hans-Dieter Lang, Michel A. Nyffenegger, Heinz Mathis, Xingqi Zhang

Abstract: Reconfigurable intelligent surfaces (RISs) are widely considered to become an integral part of future wireless communication systems. Various methodologies exist to design such surfaces; however, most consider or require a very large number of tunable components. This not only raises system complexity, but also significantly increases power consumption. Sparse RISs (SRISs) consider using a smaller… ▽ More Reconfigurable intelligent surfaces (RISs) are widely considered to become an integral part of future wireless communication systems. Various methodologies exist to design such surfaces; however, most consider or require a very large number of tunable components. This not only raises system complexity, but also significantly increases power consumption. Sparse RISs (SRISs) consider using a smaller or even minimal number of tunable components to improve overall efficiency while maintaining sufficient RIS capability. The versatile semidefinite relaxation-based optimization method previously applied to transmit array antennas is adapted and applied accordingly, to evaluate the potential of different SRIS configurations. Because the relaxation is tight in all cases, the maximum possible performance is found reliably. Hence, with this approach, the trade-off between performance and sparseness of SRIS can be analyzed. Preliminary results show that even a much smaller number of reconfigurable elements, e.g. only 50%, can still have a significant impact. △ Less

Submitted 31 August, 2023; originally announced August 2023.

Comments: EuCAP 2023

Analysis of compressible bubbly flows. Part II: Derivation of a macroscopic model

Authors: Matthieu Hillairet, Hélène Mathis, Nicolas Seguin

Abstract: This paper is the second of the series of two papers, which focuses on the derivation of an averaged 1D model for compressible bubbly flows. For this, we start from a microscopic description of the interactions between a large but finite number of small bubbles with a surrounding compressible fluid. This microscopic model has been derived and analysed in the first paper. In the present one, provid… ▽ More This paper is the second of the series of two papers, which focuses on the derivation of an averaged 1D model for compressible bubbly flows. For this, we start from a microscopic description of the interactions between a large but finite number of small bubbles with a surrounding compressible fluid. This microscopic model has been derived and analysed in the first paper. In the present one, provided physical parameters scale according to the number of bubbles, we prove that solutions to the microscopic model exist on a timespan independent of the number of bubbles. Considering then that we have a large number of bubbles, we propose a construction of the macroscopic variables and derive the averaged system satisfied by these quantities. Our method is based on a compactness approach in a strong-solution setting. In the last section, we propose the derivation of the Williams-Boltzmann equation corresponding to our setting. △ Less

Submitted 28 March, 2022; originally announced March 2022.

A Nonisothermal Thermodynamical Model Of Liquid-vapor Interaction With Metastability

Authors: Hala Ghazi, Francois James, Hélène Mathis

Abstract: The paper concerns the construction of a compressible liquid-vapor relaxation model which is able to capture the metastable states of the non isothermal van der Waals model as well as saturation states. Starting from the Gibbs formalism, we propose a dynamical system which complies with the second law of thermodynamics. Numerical simulations illustrate the expected behaviour of metastable states:… ▽ More The paper concerns the construction of a compressible liquid-vapor relaxation model which is able to capture the metastable states of the non isothermal van der Waals model as well as saturation states. Starting from the Gibbs formalism, we propose a dynamical system which complies with the second law of thermodynamics. Numerical simulations illustrate the expected behaviour of metastable states: an initial metastable condition submitted to a certain perturbation may stay in the metastable state or reaches a saturation state. The dynamical system is then coupled to the dynamics of the compressible fluid using an Euler set of equations supplemented by convection equations on the fractions of volume, mass and energy of one of the phases. △ Less

Submitted 31 October, 2019; originally announced October 2019.

A thermodynamically consistent model of a liquid-vapor fluid with a gas

Authors: Hélène Mathis

Abstract: This work is devoted to the consistent modeling of a three-phase mixture of a gas, a liquid and its vapor. Since the gas and the vapor are mis-cible, the mixture is subjected to a non-symmetric constraint on the volume. Adopting the Gibbs formalism, the study of the extensive equilibrium entropy of the system allows to recover the Dalton's law between the two gaseous phases. In addition, we distin… ▽ More This work is devoted to the consistent modeling of a three-phase mixture of a gas, a liquid and its vapor. Since the gas and the vapor are mis-cible, the mixture is subjected to a non-symmetric constraint on the volume. Adopting the Gibbs formalism, the study of the extensive equilibrium entropy of the system allows to recover the Dalton's law between the two gaseous phases. In addition, we distinguish whether phase transition occurs or not between the liquid and its vapor. The thermodynamical equilibria are described both in extensive and intensive variables. In the latter case, we focus on the geometrical properties of equilibrium entropy. The consistent characterization of the thermodynamics of the three-phase mixture is used to introduce two Homogeneous Equilibrium Models (HEM) depending on mass transfer is taking into account or not. Hyperbolicity is investigated while analyzing the entropy structure of the systems. Finally we propose two Homogeneous Relaxation Models (HRM) for the three-phase mixtures with and without phase transition. Supplementary equations on mass, volume and energy fractions are considered with appropriate source terms which model the relaxation towards the thermodynamical equilibrium, in agreement with entropy growth criterion. △ Less

Submitted 12 October, 2017; originally announced October 2017.

Numerical Convergence Rate for a Diffusive Limit of Hyperbolic Systems: p-System with Damping

Authors: Christophe Berthon, Marianne Bessemoulin-Chatard, Hélène Mathis

Abstract: This paper deals with diffusive limit of the p-system with damping and its approximation by an Asymptotic Preserving (AP) Finite Volume scheme. Provided the system is endowed with an entropy-entropy flux pair, we give the convergence rate of classical solutions of the p-system with damping towards the smooth solutions of the porous media equation using a relative entropy method. Adopting a semi-di… ▽ More This paper deals with diffusive limit of the p-system with damping and its approximation by an Asymptotic Preserving (AP) Finite Volume scheme. Provided the system is endowed with an entropy-entropy flux pair, we give the convergence rate of classical solutions of the p-system with damping towards the smooth solutions of the porous media equation using a relative entropy method. Adopting a semi-discrete scheme, we establish that the convergence rate is preserved by the approximated solutions. Several numerical experiments illustrate the relevance of this result. △ Less

Submitted 6 September, 2016; originally announced September 2016.

Journal ref: SMAI Journal of Computational Mathematics, 2016

Error estimate for time-explicit finite volume approximation of strong solutions to systems of conservation laws

Authors: Clément Cancès, Hélène Mathis, Nicolas Seguin

Abstract: We study the finite volume approximation of strong solutions to nonlinear systems of conservation laws. We focus on time-explicit schemes on unstructured meshes, with entropy satisfying numerical fluxes. The numerical entropy dissipation is quantified at each interface of the mesh, which enables to prove a weak--BV estimate for the numerical approximation under a strengthen CFL condition. Then we… ▽ More We study the finite volume approximation of strong solutions to nonlinear systems of conservation laws. We focus on time-explicit schemes on unstructured meshes, with entropy satisfying numerical fluxes. The numerical entropy dissipation is quantified at each interface of the mesh, which enables to prove a weak--BV estimate for the numerical approximation under a strengthen CFL condition. Then we derive error estimates in the multidimensional case, using the relative entropy between the strong solution and its finite volume approximation. The error terms are carefully studied, leading to a classical $h^1/4$ estimate in $L^2$ under this strengthen CFL condition. △ Less

Submitted 5 February, 2016; originally announced February 2016.

A relaxation model for liquid-vapor phase change with metastability

Authors: Francois James, Hélène Mathis

Abstract: We propose a model that describes phase transition including meta\-stable states present in the van der Waals Equation of State. From a convex optimization problem on the Helmoltz free energy of a mixture, we deduce a dynamical system that is able to depict the mass transfer between two phases, for which equilibrium states are either metastable states, stable states or {a coexistent state}. The dy… ▽ More We propose a model that describes phase transition including meta\-stable states present in the van der Waals Equation of State. From a convex optimization problem on the Helmoltz free energy of a mixture, we deduce a dynamical system that is able to depict the mass transfer between two phases, for which equilibrium states are either metastable states, stable states or {a coexistent state}. The dynamical system is then used as a relaxation source term in an isothermal 4$\times$4 two-phase model. We use a Finite Volume scheme that treats the convective part and the source term in a fractional step way. Numerical results illustrate the ability of the model to capture phase transition and metastable states. △ Less

Submitted 14 March, 2016; v1 submitted 21 July, 2015; originally announced July 2015.

Modeling phase transition and metastable phases

Authors: François James, Hélène Mathis

Abstract: We propose a model that describes phase transition including metastable phases present in the van der Waals Equation of State (EoS). We introduce a dynamical system that is able to depict the mass transfer between two phases, for which equilibrium states are both metastable and stable states, including mixtures. The dynamical system is then used as a relaxation source term in a isothermal two-phas… ▽ More We propose a model that describes phase transition including metastable phases present in the van der Waals Equation of State (EoS). We introduce a dynamical system that is able to depict the mass transfer between two phases, for which equilibrium states are both metastable and stable states, including mixtures. The dynamical system is then used as a relaxation source term in a isothermal two-phase model. We use a Finite volume scheme (FV) that treats the convective part and the source term in a fractional step way. Numerical results illustrate the ability of the model to capture phase transition and metastable states. △ Less

Submitted 6 February, 2014; originally announced February 2014.