Showing 1–50 of 88 results for author: Sasaki, S

Investigating the axial structure of the nucleon based on large-volume lattice QCD at the physical point

Authors: Ryutaro Tsuji, Yasumichi Aoki, Ken-Ichi Ishikawa, Yoshinobu Kuramashi, Shoichi Sasaki, Kohei Sato, Eigo Shintani, Hiromasa Watanabe, Takeshi Yamazaki

Abstract: We present a short summary for the calculations of the nucleon $\textit{isovector}$ form factors, which are relevant to improving the accuracy of the current neutrino oscillation experiments. The calculations are carried out with two of three sets of the $2+1$ flavor lattice QCD configurations generated at the physical point in large spatial volumes by the PACS Collaboration. The two gauge configu… ▽ More We present a short summary for the calculations of the nucleon $\textit{isovector}$ form factors, which are relevant to improving the accuracy of the current neutrino oscillation experiments. The calculations are carried out with two of three sets of the $2+1$ flavor lattice QCD configurations generated at the physical point in large spatial volumes by the PACS Collaboration. The two gauge configurations are generated with the six stout-smeared $O(a)$ improved Wilson quark action and Iwasaki gauge action at the lattice spacing of $0.09$ fm and $0.06$ fm. We summarize the results for three form factors as well as the nucleon axial-vector ($g_A$), induced pseudoscalar ($g_P^*$) and pion-nucleon ($g_{πNN}$) couplings. Although our couplings agree with the experimental data, a firm conclusion should be drawn only after a continuum limit extrapolation is taken. We investigate the partially conserved axial-vector current (PCAC) relation in the context of the nucleon correlation functions. The low-energy relations arising from the PCAC relation can be used to verify whether the lattice QCD data correctly reproduce the physics in the continuum within the statistical accuracy. It is demonstrated that our $\textit{new analysis}$ reduces the systematic uncertainty for the induced pseudoscalar and pseudoscalar form factors to a greater extent than the $\textit{traditional analysis}$, and the results offer a theoretical insight into the pion-pole dominance model. Finally, we examine the applicable $q^2$ region for the low-energy relations. △ Less

Submitted 16 May, 2025; originally announced May 2025.

Comments: 63 pages, 33 figures

Report number: UTHEP-803, UTCCS-P-166, HUPD-2504, KEK-TH-2716

Method for high-precision determination of the nucleon axial structure using lattice QCD: Removing $πN$-state contamination

Authors: Yasumichi Aoki, Ken-Ichi Ishikawa, Yoshinobu Kuramashi, Shoichi Sasaki, Kohei Sato, Eigo Shintani, Ryutaro Tsuji, Hiromasa Watanabe, Takeshi Yamazaki

Abstract: We performed a precise calculation of physical quantities related to the axial structure of the nucleon using 2+1 flavor lattice QCD gauge configuration (PACS10 configuration) generated at the physical point with lattice volume larger than $(10\;{\mathrm{fm}})^4$ by the PACS Collaboration. The nucleon matrix element of the axial-vector current has two types of the nucleon form factors, the axial-v… ▽ More We performed a precise calculation of physical quantities related to the axial structure of the nucleon using 2+1 flavor lattice QCD gauge configuration (PACS10 configuration) generated at the physical point with lattice volume larger than $(10\;{\mathrm{fm}})^4$ by the PACS Collaboration. The nucleon matrix element of the axial-vector current has two types of the nucleon form factors, the axial-vector ($F_A$) form factor and the induced pseudoscalar ($F_P$) form factor. Recently lattice QCD simulations have succeeded in reproducing the experimental value of the axial-vector coupling, $g_A$, determined from $F_A(q^2)$ at zero momentum transfer $q^2=0$, at a percent level of statistical accuracy. However, the $F_P$ form factor so far has not reproduced the experimental values well due to strong $πN$ excited-state contamination. Therefore, we proposed a simple subtraction method for removing the so-called leading $πN$-state contribution, and succeeded in reproducing the values obtained by two experiments of muon capture on the proton and pion electro-production for $F_P(q^2)$. The novel approach can also be applied to the nucleon pseudoscalar matrix element to determine the pseudoscalar ($G_P$) form factor with the help of the axial Wald-Takahashi identity. The resulting form factors, $F_P(q^2)$ and $G_P(q^2)$, are in good agreement with the prediction of the pion-pole dominance model. In the new analysis, the induced pseudoscalar coupling $g_P^\ast$ and the pion-nucleon coupling $g_{πNN}$ can be evaluated with a few percent accuracy including systematic uncertainties using existing data calculated at two lattice spacings. △ Less

Submitted 11 May, 2025; originally announced May 2025.

Comments: 45 pages, 31 figures

Report number: UTHEP-802, UTCCS-P-165, HUPD-2503, KEK-TH-2715

Glueball mass spectrum at finite temperature revisited: Constant contribution in glueball correlators in the deconfinement phase

Authors: Toshizo Arikawa, Keita Sakai, Shoichi Sasaki

Abstract: We study the glueball properties at finite temperature from the temporal correlation in $SU(3)$ Yang-Mills theory using anisotropic lattice QCD. Although the existence of a constant contribution to the meson correlation function appearing in the deconfinement phase are known, its effect on the glueball correlation function at finite temperature has not been considered in previous studies. The pres… ▽ More We study the glueball properties at finite temperature from the temporal correlation in $SU(3)$ Yang-Mills theory using anisotropic lattice QCD. Although the existence of a constant contribution to the meson correlation function appearing in the deconfinement phase are known, its effect on the glueball correlation function at finite temperature has not been considered in previous studies. The present study reveals that the constant contribution to the glueball correlation function actually occurs in the three lowest-lying glueball states, corresponding to the $0^{++}$, $2^{++}$ and $0^{-+}$ glueballs, from near the critical temperature of the deconfinement phase transition $T_C$ to the high temperature side. If the existence of constant terms is taken into account in the standard pole-mass analysis, it is observed that the pole-mass of the glueball ground state remains unchanged below $T_c$ and then increases with temperature above $T_C$. The result indicates that the true temperature dependence of the glueball mass above $T_C$ is opposite to the results of the previous studies. △ Less

Submitted 12 April, 2025; originally announced April 2025.

Comments: 23 pages, 39 figures

A proposal for removing $πN$-state contamination from the nucleon induced pseudoscalar form factor in lattice QCD

Authors: Shoichi Sasaki, Yasumichi Aoki, Ken-Ichi Ishikawa, Yoshinobu Kuramashi, Kohei Sato, Eigo Shintani, Ryutaro Tsuji, Hiromasa Watanabe, Takeshi Yamazaki

Abstract: In the PACS10 project, the PACS collaboration has generated three sets of the PACS10 gauge configurations at the physical point with lattice volume larger than $(10\;{\rm fm})^4$ and three different lattice spacings. The isovector nucleon form factors had been already calculated by using two sets of the PACS10 gauge configurations. In our strategy, the smearing parameters of the nucleon interpolat… ▽ More In the PACS10 project, the PACS collaboration has generated three sets of the PACS10 gauge configurations at the physical point with lattice volume larger than $(10\;{\rm fm})^4$ and three different lattice spacings. The isovector nucleon form factors had been already calculated by using two sets of the PACS10 gauge configurations. In our strategy, the smearing parameters of the nucleon interpolation operator were highly optimized to eliminate as much as possible the contribution of excited states in the nucleon two-point function. This strategy was quite successful in calculations of the electric ($G_E$), magnetic ($G_M$) and axial-vector ($F_A$) form factors, while the induced pseudoscalar ($F_P$) and pseudoscalar ($G_P$) form factors remained strongly affected by residual contamination of $πN$-state contribution. In this work, we propose a simple method to remove the $πN$-state contamination from the $F_P$ form factor, and then evaluate the induced pseudoscalar charge $g_P^\ast$ and the pion-nucleon coupling $g_{πNN}$ from existing data in a new analysis. Applying this method to the $G_P$ form factor is also considered with a help of the axial Ward-Takahashi identity. △ Less

Submitted 21 April, 2025; v1 submitted 23 January, 2025; originally announced January 2025.

Comments: 10 pages, 11 figures, v2: typos corrected, Proceedings of the 41st International Symposium on Lattice Field Theory (Lattice 2024), July 28th - August 3rd, 2024, University of Liverpool, UK

Report number: KEK-TH-2683

Applying the Triad network representation to four-dimensional ATRG method

Authors: Yuto Sugimoto, Shoichi Sasaki

Abstract: Anisotropic Tensor Renormalization Group (ATRG) is a powerful algorithm for four-dimensional tensor network calculations. However, the larger bond dimensions are known to be difficult to achieve in practice due to the higher computational cost. Adopting the methods of the minimally decomposed TRG and its triad prescriptions, we construct a triad representation of the four-dimensional ATRG by decom… ▽ More Anisotropic Tensor Renormalization Group (ATRG) is a powerful algorithm for four-dimensional tensor network calculations. However, the larger bond dimensions are known to be difficult to achieve in practice due to the higher computational cost. Adopting the methods of the minimally decomposed TRG and its triad prescriptions, we construct a triad representation of the four-dimensional ATRG by decomposing the unit-cell tensor. We observe that this combining approach can significantly improve the computational cost even with maintaining the convergence accuracy of the free energy in the four-dimensional Ising model. In addition, we also show that a further improvement can be achieved in terms of the computational cost when our proposed approach is implemented in parallel on GPUs. △ Less

Submitted 25 January, 2025; v1 submitted 18 December, 2024; originally announced December 2024.

Comments: 9 pages, 7 figures; Proceedings of the 41st International Symposium on Lattice Field Theory (Lattice 2024), July 28th - August 3rd, 2024, University of Liverpool, UK

Journal ref: PoS LATTICE2024 (2025) 038

Studies of nucleon isovector structure with the PACS10 superfine lattice

Authors: Ryutaro Tsuji, Yasumichi Aoki, Ken-Ichi Ishikawa, Yoshinobu Kuramashi, Shoichi Sasaki, Kohei Sato, Eigo Shintani, Hiromasa Watanabe, Takeshi Yamazaki

Abstract: We present the results for the nucleon axial-vector, induced pseudoscalar and pion-nucleon couplings obtained from 2+1 flavor lattice QCD at the physical point with a large spatial extent of about 10 fm. Our calculations are performed with the PACS10 gauge configurations generated by the PACS Collaboration with the six stout-smeared $O(a)$ improved Wilson-clover quark action and Iwasaki gauge acti… ▽ More We present the results for the nucleon axial-vector, induced pseudoscalar and pion-nucleon couplings obtained from 2+1 flavor lattice QCD at the physical point with a large spatial extent of about 10 fm. Our calculations are performed with the PACS10 gauge configurations generated by the PACS Collaboration with the six stout-smeared $O(a)$ improved Wilson-clover quark action and Iwasaki gauge action at $β$ = 1.82, 2.00 and 2.20 corresponding to lattice spacings of 0.09 fm (coarse), 0.06 fm (fine) and 0.04 fm (superfine), respectively. We first evaluate the value of the nucleon axial-vector coupling. In addition, the induced pseudoscalar and pion-nucleon couplings from the induced pseudoscalar form factor are also investigated. Combining the results obtained from the all of our coarse, fine and superfine lattices, we finally discuss the systematic uncertainties in our calculation based on the comparison with both of the experimental values and lattice QCD results provided by the other collaborations. △ Less

Submitted 24 January, 2025; v1 submitted 25 November, 2024; originally announced November 2024.

Comments: 9 pages, 2 figures, Proceedings of the 41st International Symposium on Lattice Field Theory (Lattice 2024), July 28th - August 3rd, 2024, University of Liverpool, UK. arXiv admin note: text overlap with arXiv:2401.05340

Report number: KEK-TH-2681

Extraction of the $S$-wave and $P$-wave $DD^*$ scattering phase shifts using twisted boundary conditions

Authors: Masato Nagatsuka, Shoichi Sasaki

Abstract: We present results of a lattice study of the $S$-wave and $P$-wave $DD^*$ scattering phase shifts using Lüscher's method under the twisted boundary conditions to investigate the doubly charmed tetraquark $T_{cc}^+$ observed by the LHCb collaboration. Although the scattering phase shift at zero momentum gives information about the number of bound states according to Levinson's theorem, Lüscher's me… ▽ More We present results of a lattice study of the $S$-wave and $P$-wave $DD^*$ scattering phase shifts using Lüscher's method under the twisted boundary conditions to investigate the doubly charmed tetraquark $T_{cc}^+$ observed by the LHCb collaboration. Although the scattering phase shift at zero momentum gives information about the number of bound states according to Levinson's theorem, Lüscher's method under the periodic boundary condition only accesses the scattering phase shifts at some discrete momenta and is not suitable for watching the signal of bound state formation. On the other hand, the twisted boundary condition has the advantage that the scattering phase shift at any momentum can be calculated and that not only the $S$-wave scattering phase shift but also the $P$-wave scattering phase shift can be obtained simultaneously. In this study, we perform the simulation for the $DD^*$ and $BB^*$ systems in the $I=0$ channel using 2+1 flavor PACS-CS gauge ensembles simulated at $m_π=295$ and 411 $\mathrm{MeV}$. △ Less

Submitted 8 November, 2024; v1 submitted 13 October, 2024; originally announced October 2024.

Comments: 9 pages, 6 figures, v2: We corrected isospin projection in our analysis code, and then recalculated the phase shifts with the correct isospin projection, Proceedings of the 41st International Symposium on Lattice Field Theory (Lattice 2024), July 28th - August 3rd, 2024, University of Liverpool, UK

Prospects for the stout smearing as an equivalent approach to the Wilson flow

Authors: Masato Nagatsuka, Keita Sakai, Shoichi Sasaki

Abstract: We present the equivalence between the Wilson flow and the stout smearing. The similarity between these two methods was first pointed out by Lüscher's original paper on the Wilson flow. We first show the analytical equivalence of two methods, which indicates that the finite stout smearing parameter induces ${\cal O}(a^2)$ correction. We secondly show that they remain equivalent in numerical simula… ▽ More We present the equivalence between the Wilson flow and the stout smearing. The similarity between these two methods was first pointed out by Lüscher's original paper on the Wilson flow. We first show the analytical equivalence of two methods, which indicates that the finite stout smearing parameter induces ${\cal O}(a^2)$ correction. We secondly show that they remain equivalent in numerical simulations within some numerical precision even with finite cutoffs and stout smearing parameters by directly comparing the expectation values of the action density and we shortly mention the use of the equivalence. △ Less

Submitted 27 November, 2023; originally announced January 2024.

Comments: 7 pages, 3figures, Proceedings of the 40th International Symposium on Lattice Field Theory (Lattice 2023), July 31st - August 4th, 2023, Fermilab, Batavia, Illinois, USA

Discretization effects on nucleon root-mean-square radii from lattice QCD at the physical point

Authors: Ryutaro Tsuji, Yasumichi Aoki, Ken-Ichi Ishikawa, Yoshinobu Kuramashi, Shoichi Sasaki, Eigo Shintani, Takeshi Yamazaki

Abstract: We present results for the axial-vector coupling and root-mean-square (RMS) radii of the nucleon obtained from 2+1 flavor lattice QCD at the physical point with a large spatial extent of about 10 fm. Our calculations are performed with the PACS10 gauge configurations generated by the PACS Collaboration with the six stout-smeared $O(a)$ improved Wilson-clover quark action and Iwasaki gauge action a… ▽ More We present results for the axial-vector coupling and root-mean-square (RMS) radii of the nucleon obtained from 2+1 flavor lattice QCD at the physical point with a large spatial extent of about 10 fm. Our calculations are performed with the PACS10 gauge configurations generated by the PACS Collaboration with the six stout-smeared $O(a)$ improved Wilson-clover quark action and Iwasaki gauge action at $β$ = 1.82 and 2.00 corresponding to lattice spacings of 0.085 fm and 0.063 fm, respectively. We first evaluate the value of the axial-vector coupling of the nucleon ($g_A$). In addition, the isovector electric, magnetic and axial radii and magnetic moment from the corresponding form factors are also determined. Combining the results at $β=1.82$ and $2.00$, we finally discuss the finite lattice spacing effect. It was found that the effect on $g_A$ is kept smaller than the statistical error of 2% while the effect on the isovector radii was observed as a possible discretization error of about 10%, regardless of the channel. △ Less

Submitted 29 November, 2023; originally announced January 2024.

Comments: 7 pages, 1 figure, Proceeding for the 40th International Symposium on Lattice Field Theory, 31 July 2023 - 4 August 2023, Chicago, USA

Nucleon form factors in $N_f=2+1$ lattice QCD at the physical point : finite lattice spacing effect on the root-mean-square radii

Authors: Ryutaro Tsuji, Yasumichi Aoki, Ken-Ichi Ishikawa, Yoshinobu Kuramashi, Shoichi Sasaki, Kohei Sato, Eigo Shintani, Hiromasa Watanabe, Takeshi Yamazaki

Abstract: We present results for the nucleon form factors: electric ($G_E$), magnetic ($G_M$), axial ($F_A$), induced pseudoscalar ($F_P$) and pseudoscalar ($G_P$) form factors, using the second PACS10 ensemble that is one of three sets of $2+1$ flavor lattice QCD configurations at physical quark masses in large spatial volumes (exceeding $(10\ \mathrm{fm})^3$). The second PACS10 gauge configurations are ge… ▽ More We present results for the nucleon form factors: electric ($G_E$), magnetic ($G_M$), axial ($F_A$), induced pseudoscalar ($F_P$) and pseudoscalar ($G_P$) form factors, using the second PACS10 ensemble that is one of three sets of $2+1$ flavor lattice QCD configurations at physical quark masses in large spatial volumes (exceeding $(10\ \mathrm{fm})^3$). The second PACS10 gauge configurations are generated by the PACS Collaboration with the six stout-smeared $O(a)$ improved Wilson quark action and Iwasaki gauge action at the second gauge coupling $β=2.00$ corresponding to the lattice spacing of $a=0.063$ fm. We determine the isovector electric, magnetic and axial radii and magnetic moment from the corresponding form factors, as well as the axial-vector coupling $g_A$. Combining our previous results for the coarser lattice spacing [E. Shintani et al., Phys. Rev. D99 (2019) 014510; Phys. Rev. D102 (2020) 019902 (erattum)], the finite lattice spacing effects on the isovector radii, magnetic moment and axial-vector coupling are investigated using the difference between the two results. It was found that the effect on $g_A$ is kept smaller than the statistical error of 2% while the effect on the isovector radii was observed as a possible discretization error of about 10%, regardless of the channel. We also report the partially conserved axial vector current (PCAC) relation using a set of nucleon three-point correlation functions in order to verify the effect by $O(a)$-improvement of the axial-vector current. △ Less

Submitted 5 June, 2024; v1 submitted 17 November, 2023; originally announced November 2023.

Comments: 100 pages, 48 figures

Report number: UTHEP-783, UTCCS-P-149, HUPD-2307, YITP-23-143

On the equivalence between the Wilson flow and stout-link smearing

Authors: Masato Nagatsuka, Keita Sakai, Shoichi Sasaki

Abstract: We present the numerical equivalence between the Wilson flow and stout-link smearing, both of which are known to be a relatively new technique for smoothing the gauge fields on the lattice. Although the conceptional correspondence between two methods was first pointed out by Lüscher in his original paper [J. High Energy Phys.~08 (2010) 071], we provide a direct analytical proof of the equivalence… ▽ More We present the numerical equivalence between the Wilson flow and stout-link smearing, both of which are known to be a relatively new technique for smoothing the gauge fields on the lattice. Although the conceptional correspondence between two methods was first pointed out by Lüscher in his original paper [J. High Energy Phys.~08 (2010) 071], we provide a direct analytical proof of the equivalence between the two methods at finite lattice spacing $a$ in the zero limit of the stout-smearing parameter $ρ$. The leading order corrections start at ${\cal O}(ρ)$, which would induce ${\cal O}(a^2)$ corrections. It is, therefore, not obvious that they remain equivalent even with finite parameters ($a\neq 0$ and $ρ\neq0$) within some numerical precision. In this paper, we demonstrate the equivalence of both methods by directly comparing the expectation value of the action density, which is measured in actual numerical simulations. △ Less

Submitted 27 November, 2023; v1 submitted 17 March, 2023; originally announced March 2023.

Comments: 22 pages, 7 figures; v2: major updates regarding to analytic proof of the equivalence of two methods, conclusions remain unchanged, v3: version published in PRD

Journal ref: Phys. Rev. D 108, 094506 (2023)

Glueball spectroscopy in lattice QCD using gradient flow

Authors: Keita Sakai, Shoichi Sasaki

Abstract: Removing ultraviolet noise from the gauge fields is necessary for glueball spectroscopy in lattice QCD. It is known that the Yang-Mills gradient flow method is an alternative approach instead of link smearing or link fuzzing in various aspects. In this work we study the application of the gradient flow technique to the construction of the extended glueball operators. We examine a simple applicatio… ▽ More Removing ultraviolet noise from the gauge fields is necessary for glueball spectroscopy in lattice QCD. It is known that the Yang-Mills gradient flow method is an alternative approach instead of link smearing or link fuzzing in various aspects. In this work we study the application of the gradient flow technique to the construction of the extended glueball operators. We examine a simple application of the gradient flow method, which has some problems in glueball mass calculations at large flow time because of its nature of diffusion in space-time. To avoid this problem, the spatial links are evolved by the ``spatial gradient flow'', that is defined to restrict the diffusion to spatial directions only. We test the spatial gradient flow in calculations of glueball two-point functions and Wilson loops as a new smearing method, and then discuss its efficiency in comparison with the original gradient flow method and the conventional method. Furthermore, to demonstrate the feasibility of our proposed method, we determine the masses of the three lowest-lying glueball states, corresponding to the $0^{++}$, $2^{++}$ and $0^{-+}$ glueballs, in the continuum limit in the pure Yang-Mills theory. △ Less

Submitted 2 March, 2023; v1 submitted 28 November, 2022; originally announced November 2022.

Comments: 36 pages, 14 figures

Towards the continuum limit of nucleon form factors at the physical point using lattice QCD

Authors: Ryutaro Tsuji, Yasumichi Aoki, Ken-Ichi Ishikawa, Yoshinobu Kuramashi, Shoichi Sasaki, Eigo Shintani, Takeshi Yamazaki

Abstract: We present results for the axial charge and root-mean-square (RMS) radii of the nucleon obtained from 2+1 flavor lattice QCD at the physical point with a large spatial extent of about 10 fm. Our calculations are performed with the PACS10 gauge configurations generated by the PACS Collaboration with the six stout-smeared $O(a)$ improved Wilson-clover quark action and Iwasaki gauge action at $β$ = 1… ▽ More We present results for the axial charge and root-mean-square (RMS) radii of the nucleon obtained from 2+1 flavor lattice QCD at the physical point with a large spatial extent of about 10 fm. Our calculations are performed with the PACS10 gauge configurations generated by the PACS Collaboration with the six stout-smeared $O(a)$ improved Wilson-clover quark action and Iwasaki gauge action at $β$ = 1.82 and 2.00 corresponding to lattice spacings of 0.085 fm and 0.063 fm respectively. We first evaluate the value of $g_A/g_V$ , which is not renormalized in the continuum limit and thus ends up with the renormalized axial charge. Moreover, we also calculate the nucleon elastic form factors and determine three kinds of isovector RMS radii such as electric, magnetic and axial ones at the two lattice spacings. We finally discuss the discretization uncertainties on renormalized axial charge and isovector RMS radii towards the continuum limit. △ Less

Submitted 9 November, 2022; originally announced November 2022.

Comments: 9 pages, 2 figures, Proceeding for the 39th International Symposium on Lattice Field Theory, 8th-13th August 2022, Bonn, Germany

Nucleon isovector couplings in Nf = 2 + 1 lattice QCD at the physical point

Authors: Ryutaro Tsuji, Natsuki Tsukamoto, Yasumichi Aoki, Ken-Ichi Ishikawa, Yoshinobu Kuramashi, Shoichi Sasaki, Eigo Shintani, Takeshi Yamazaki

Abstract: We present results for the scalar and tensor isovector-couplings ($g_S$ and $g_T$) of the nucleon measured at the physical point ($M_π=135$ MeV) with a single lattice spacing of $0.085\ \mathrm{fm}$ in 2+1 flavor QCD. Our calculations are carried out with two ensembles of gauge configurations generated by the PACS Collaboration with nonperturbatively ${\cal O}(a)$ improved Wilson quark action and… ▽ More We present results for the scalar and tensor isovector-couplings ($g_S$ and $g_T$) of the nucleon measured at the physical point ($M_π=135$ MeV) with a single lattice spacing of $0.085\ \mathrm{fm}$ in 2+1 flavor QCD. Our calculations are carried out with two ensembles of gauge configurations generated by the PACS Collaboration with nonperturbatively ${\cal O}(a)$ improved Wilson quark action and Iwasaki gauge action on $(10.9\ {\rm fm})^4$ and $(5.5\ {\rm fm})^4$ lattices, where the finite-size effect on the nucleon mass was not shown at the level of the statistical precision less than 0.5%. We compute the nucleon three-point correlation functions in the vector, axial, scalar, and tensor channels. We confirm that our previous result of the nucleon axial coupling on the large spatial volume of $(10.9\ {\rm fm})^4$ has no finite-size effect at the level of the statistical precision of 1.9%. For the renormalization, we first renormalize $g_S$ and $g_T$ nonperturbatively using the RI/SMOM$_{(γ_μ)}$ scheme, a variant of Rome-Southampton RI/MOM scheme with reduced systematic errors, as the intermediate scheme. We evaluate our final results at the renormalization scale of 2 GeV in the $\overline{\rm MS}$ scheme through matching procedure between the RI/SMOM$_{(γ_μ)}$ and $\overline{\rm MS}$ schemes with the help of perturbation theory, and then obtain $g_S=0.927(71)_{\rm stat}(22)_{\rm syst}$ and $g_T=1.036(6)_{\rm stat}(20)_{\rm syst}$. △ Less

Submitted 20 October, 2022; v1 submitted 25 July, 2022; originally announced July 2022.

Comments: 52 pages, 11 figures

Report number: UTHEP-771, UTCCS-P-145, HUPD-2209

Nucleon isovector tensor charge from lattice QCD with physical light quarks

Authors: Ryutaro Tsuji, Yasumichi Aoki, Ken-Ichi Ishikawa, Yoshinobu Kuramashi, Shoichi Sasaki, Eigo Shintani, Takeshi Yamazaki

Abstract: We present preliminary results for the axial, scalar and tensor charges of the nucleon measured in 2+1 flavor QCD with the physical light quarks ($m_π=135$ MeV). Our simulations are carried out with gauge configurations generated by the PACS Collaboration with the stout-smeared $O(a)$ improved Wilson fermions and Iwasaki gauge action at a single lattice spacing of $0.085\ (\mathrm{fm})$. There are… ▽ More We present preliminary results for the axial, scalar and tensor charges of the nucleon measured in 2+1 flavor QCD with the physical light quarks ($m_π=135$ MeV). Our simulations are carried out with gauge configurations generated by the PACS Collaboration with the stout-smeared $O(a)$ improved Wilson fermions and Iwasaki gauge action at a single lattice spacing of $0.085\ (\mathrm{fm})$. There are two lattice ensembles of the PACS gauge configurations, which have physical lattice sizes over $(10\ \mathrm{fm})^4$ and $(5\ \mathrm{fm})^4$, respectively. We compute the nucleon three-point correlation functions in the axial, scalar, and tensor channels. For the renormalization, we use the Rome-Southampton method as the intermediate scheme in order to evaluate the renormalization constants for the scalar and tensor currents in fully nonperturbative manner. We then evaluate the renormalized values of the scalar and tensor charges ($g_S$ and $g_T$) in the $\overline{\rm MS}$ scheme at the renormalization scale of 2 GeV with a help of the continuum perturbation theory for the matching between two schemes. We compare our preliminary results of $g_S$ and $g_T$ with those of other collaboration results. △ Less

Submitted 27 January, 2022; originally announced January 2022.

Comments: 5 pages, 5 figures, Proceedings of the 24th International Spin Symposium, October 18-22, 2021, Matsue, Japan

Report number: HUPD-2202

The lower moments of nucleon structure functions in lattice QCD with physical quark masses

Authors: Ryutaro Tsuji, Yasumichi Aoki, Ken-Ichi Ishikawa, Yoshinobu Kuramashi, Shoichi Sasaki, Eigo Shintani, Takeshi Yamazaki

Abstract: We present results for the nucleon structure functions and form factors obtained from 2+1 flavor lattice QCD with physical light quark masses ($m_π=135$ MeV) in a large spatial extent of about 10 fm. Our calculations are performed with the PACS10 gauge configurations generated by the PACS Collaboration with the six stout-smeared ${\mathscr{O}}(a)$ improved Wilson-clover quark action and Iwasaki ga… ▽ More We present results for the nucleon structure functions and form factors obtained from 2+1 flavor lattice QCD with physical light quark masses ($m_π=135$ MeV) in a large spatial extent of about 10 fm. Our calculations are performed with the PACS10 gauge configurations generated by the PACS Collaboration with the six stout-smeared ${\mathscr{O}}(a)$ improved Wilson-clover quark action and Iwasaki gauge action at $β=1.82$ and $2.00$ corresponding to lattice spacings of $0.085$ fm and $0.064$ fm respectively. The lower moments of structure functions, $\langle x \rangle_{u-d}$ and $\langle x \rangle_{Δu - Δd}$ given by the twist-2 operators being properly renormalized, are evaluated in the $\overline{\rm MS}$ scheme at the renormalization scale of 2 GeV only at $β=1.82$, since the renormalization factors at $β=2.00$ have not yet determined nonperturbatively in the RI/MOM scheme. Instead, at two lattice spacings, we evaluate appropriate ratios of $g_{A}/g_{V}$ and $\langle x \rangle_{u-d}/\langle x \rangle_{Δu -Δd}$, which are not renormalized in the continuum limit. These quantities thus can be directly compared with the experimental data without the renormalization. △ Less

Submitted 30 December, 2021; originally announced December 2021.

Comments: 9 pages, 4 figures, , talk presented at the 38th International Symposium on Lattice Field Theory (Lattice 2021), 26-30 July, 2021, Zoom/Gather@Massachusetts Institute of Technology

Report number: HUPD-2112

Calculation of derivative of nucleon form factors in $N_f = 2+1$ lattice QCD at $M_π= 138$ MeV on a (5.5 fm)$^3$ volume

Authors: Ken-Ichi Ishikawa, Yoshinobu Kuramashi, Shoichi Sasaki, Eigo Shintani, Takeshi Yamazaki

Abstract: We present a direct calculation for the first derivative of the isovector nucleon form factors with respect to the momentum transfer $q^2$ using the lower moments of the nucleon 3-point function in the coordinate space. Our numerical simulations are performed using the $N_f = 2 + 1$ nonperturbatively $O(a)$-improved Wilson quark action and Iwasaki gauge action near the physical point, correspondin… ▽ More We present a direct calculation for the first derivative of the isovector nucleon form factors with respect to the momentum transfer $q^2$ using the lower moments of the nucleon 3-point function in the coordinate space. Our numerical simulations are performed using the $N_f = 2 + 1$ nonperturbatively $O(a)$-improved Wilson quark action and Iwasaki gauge action near the physical point, corresponding to the pion mass $M_π=138$ MeV, on a (5.5 fm)$^4$ lattice at a single lattice spacing of $a = 0.085$ fm. In the momentum derivative approach, we can directly evaluate the mean square radii for the electric, magnetic, and axial-vector form factors, and also the magnetic moment without the $q^2$ extrapolation to the zero momentum point. These results are compared with the ones determined by the standard method, where the $q^2$ extrapolations of the corresponding form factors are carried out by fitting models. We find that the new results from the momentum derivative method are obtained with a larger statistical error than the standard method, but with a smaller systematic error associated with the data analysis. Within the total error range of the statistical and systematic errors combined, the two results are in good agreement. On the other hand, two variations of the momentum derivative of the induced pseudoscalar form factor at the zero momentum point show some discrepancy. It seems to be caused by a finite volume effect, since a similar trend is not observed on a large volume, but seen on a small volume in our pilot calculations at a heavier pion mass of $M_π= 510$ MeV. Furthermore, we discuss an equivalence between the momentum derivative method and the similar approach with the point splitting vector current. △ Less

Submitted 14 July, 2021; originally announced July 2021.

Comments: 43 pages, 22 figures

Report number: UTHEP-757, UTCCS-P-138, HUPD-2106

Nucleon isovector couplings from 2+1 flavor lattice QCD at the physical point

Authors: Natsuki Tsukamoto, Yasumichi Aoki, Ken-Ichi Ishikawa, Yoshinobu Kuramashi, Eigo Shintani, Shoichi Sasaki, Takeshi Yamazaki

Abstract: We present results on the axial, scalar and tensor isovector-couplings of the nucleon from 2+1 flavor lattice QCD with physical light quarks ($m_π$ = 135 MeV) in large spatial volume of (10.8 fm)$^3$. The calculations are carried out with the PACS10 gauge configurations generated by the PACS Collaboration with the stout-smeared $\mathcal{O}(a)$ improved Wilson fermions and Iwasaki gauge action at… ▽ More We present results on the axial, scalar and tensor isovector-couplings of the nucleon from 2+1 flavor lattice QCD with physical light quarks ($m_π$ = 135 MeV) in large spatial volume of (10.8 fm)$^3$. The calculations are carried out with the PACS10 gauge configurations generated by the PACS Collaboration with the stout-smeared $\mathcal{O}(a)$ improved Wilson fermions and Iwasaki gauge action at $β=1.82$ corresponding to the lattice spacing of 0.084 fm. For the renormalization, we use the RI/SMOM scheme, a variant of Rome-Southampton RI/MOM scheme with reduced systematic errors, as the intermediate scheme. We then evaluate our final results in the $\overline{\rm MS}$ scheme at a scale of 2 GeV, using the continuum perturbation theory for the matching scale of RI/SMOM and $\overline{\rm MS}$ schemes and running. △ Less

Submitted 2 December, 2019; originally announced December 2019.

Comments: 7 pages, 8 figures ;Proceedings of the 37th International Symposium on Lattice Field Theory (Lattice 2019), 16-22 June 2019, Wuhan, China

Nucleon form factors and root-mean-square radii on a (10.8 fm$)^4$ lattice at the physical point

Authors: Eigo Shintani, Ken-Ichi Ishikawa, Yoshinobu Kuramashi, Shoichi Sasaki, Takeshi Yamazaki

Abstract: We present the nucleon form factors and root-mean-square (RMS) radii measured on a (10.8 fm$)^4$ lattice at the physical point. We compute the form factors at small momentum transfer region in $q^2\le 0.102$ GeV$^2$ with the standard plateau method choosing four source-sink separation times $t_{\rm sep}$ from 0.84 to 1.35 fm to examine the possible excited state contamination. We obtain the electr… ▽ More We present the nucleon form factors and root-mean-square (RMS) radii measured on a (10.8 fm$)^4$ lattice at the physical point. We compute the form factors at small momentum transfer region in $q^2\le 0.102$ GeV$^2$ with the standard plateau method choosing four source-sink separation times $t_{\rm sep}$ from 0.84 to 1.35 fm to examine the possible excited state contamination. We obtain the electric and magnetic form factors and their RMS radii for not only the isovector channel but also the proton and neutron ones without the disconnected diagram. We also obtain the axial-vector coupling and the axial radius from the axial-vector form factor. We find that these three form factors do not show large $t_{\rm sep}$ dependence in our lattice setup. On the other hand, the induced pseudoscalar and pseudoscalar form factors show the clear effects of the excited state contamination, which affect the generalized Goldberger-Treiman relation. △ Less

Submitted 30 July, 2020; v1 submitted 18 November, 2018; originally announced November 2018.

Comments: 24 pages, 27 figures, published version. Erratum is appended to original version. We corrected the normalization factors in our analysis code, and then recalculated the form factors with the correct normalization factors

Journal ref: Phys. Rev. D 99, 014510 (2019), Erratum: Phys. Rev. D 102, 019902 (2020)

Nucleon form factors on a large volume lattice near the physical point in 2+1 flavor QCD

Authors: Ken-Ichi Ishikawa, Yoshinobu Kuramashi, Shoichi Sasaki, Natsuki Tsukamoto, Akira Ukawa, Takeshi Yamazaki

Abstract: We present results for the isovector nucleon form factors measured on a $96^4$ lattice at almost the physical pion mass with a lattice spacing of 0.085 fm in 2+1 flavor QCD. The configurations are generated with the stout-smeared $O(a)$-improved Wilson quark action and the Iwasaki gauge action at $β$=1.82. The pion mass at the simulation point is about 146 MeV. A large spatial volume of… ▽ More We present results for the isovector nucleon form factors measured on a $96^4$ lattice at almost the physical pion mass with a lattice spacing of 0.085 fm in 2+1 flavor QCD. The configurations are generated with the stout-smeared $O(a)$-improved Wilson quark action and the Iwasaki gauge action at $β$=1.82. The pion mass at the simulation point is about 146 MeV. A large spatial volume of $(8.1~{\rm fm})^3$ allows us to investigate the form factors in the small momentum transfer region. We determine the isovector electric radius and magnetic moment from nucleon electric ($G_E$) and magnetic ($G_M$) form factors as well as the axial-vector coupling $g_A$. We also report on the results of the axial-vector ($F_A$), induced pseudoscalar ($F_P$) and pseudoscalar ($G_P$) form factors in order to verify the axial Ward-Takahashi identity in terms of the nucleon matrix elements, which may be called the generalized Goldberger-Treiman relation. △ Less

Submitted 17 October, 2018; v1 submitted 11 July, 2018; originally announced July 2018.

Comments: 23 pages, 40 figures; v2: version published in PRD

Report number: UTHEP-721, UTCCS-P-113, HUPD-1806

Journal ref: Phys. Rev. D 98, 074510 (2018)

Image-processing the topological charge density in the CP(N-1) model

Authors: Yuya Abe, Kenji Fukushima, Yoshimasa Hidaka, Hiroaki Matsueda, Koichi Murase, Shoichi Sasaki

Abstract: We study the topological charge density distribution using the two-dimensional $CP^{N-1}$ model. We numerically compute not only the topological susceptibility, which is a spatially global quantity to probe topological properties of the whole system, but also the topological charge correlator with finite momentum. We perform Fourier power spectrum analysis for the topological charge density for va… ▽ More We study the topological charge density distribution using the two-dimensional $CP^{N-1}$ model. We numerically compute not only the topological susceptibility, which is a spatially global quantity to probe topological properties of the whole system, but also the topological charge correlator with finite momentum. We perform Fourier power spectrum analysis for the topological charge density for various values of the inverse temperature $β$. We propose to utilize the Fourier entropy as a convenient measure to characterize spatial distribution patterns and demonstrate that the Fourier entropy exhibits nontrivial temperature dependence. We also consider the snapshot entropy defined with the singular value decomposition, which also turns out to behave nonmonotonically with the temperature. We give a possible interpretation suggested from the strong-coupling analysis. △ Less

Submitted 23 October, 2019; v1 submitted 28 May, 2018; originally announced May 2018.

Comments: 12 pages, 10 figures, 1 table; major updates with comparison to the strong-coupling expansion, discussions on infinitesimal deconfinement added

Report number: RIKEN-iTHEMS-Report-18

Journal ref: Prog Theor Exp Phys (2020)

Nucleon structure from 2+1 flavor lattice QCD near the physical point

Authors: Natsuki Tsukamoto, Ken-Ichi Ishikawa, Yoshinobu Kuramashi, Shoichi Sasaki, Takeshi Yamazaki

Abstract: We present an update on our results of nucleon form factors measured on a large-volume lattice $(8.1\rm{fm})^4$ at almost the physical point in 2+1 flavor QCD. The configurations are generated with the stout-smeared $\mathcal{O}(a)$ improved Wilson quark action and Iwasaki gauge action at $β= 1.82$, which corresponds to the lattice spacing of 0.085 fm. The pion mass at the simulation point is abou… ▽ More We present an update on our results of nucleon form factors measured on a large-volume lattice $(8.1\rm{fm})^4$ at almost the physical point in 2+1 flavor QCD. The configurations are generated with the stout-smeared $\mathcal{O}(a)$ improved Wilson quark action and Iwasaki gauge action at $β= 1.82$, which corresponds to the lattice spacing of 0.085 fm. The pion mass at the simulation point is about 145 MeV. We determine the iso- vector electric radius and magnetic moment from nucleon electric ($G_E$) and magnetic ($G_M$) form factors. We also report on preliminary results of the axial-vector ($F_A$), induced pseudo-scalar ($F_P$) and pseudo-scalar ($G_P$) form factors in order to verify the axial Ward- Takahashi identity in terms of the nucleon matrix elements, which may be called as the generalized Goldberger-Treiman relation. △ Less

Submitted 30 October, 2017; originally announced October 2017.

Comments: 8 pages, 12 figures; talk presented at the 35th International Symposium on Lattice Field Theory, 18-24 June 2017, Granada, Spain

Continuum limit of hyperon vector coupling $f_1(0)$ from 2+1 flavor domain wall QCD

Authors: Shoichi Sasaki

Abstract: We determine the hyperon vector couplings $f_1(0)$ for $Σ^{-}\rightarrow nl^-\bar{ν_l}$ and $Ξ^0\rightarrowΣ^{+}l^-\bar{ν_l}$ semileptonic decays in the continuum limit with (2+1)-flavors of dynamical domain-wall fermions, using the Iwasaki gauge action at two different lattice spacings of $a$=0.114(2) and 0.086(2) fm. A theoretical estimation of flavor SU(3)-breaking effect on the vector coupling… ▽ More We determine the hyperon vector couplings $f_1(0)$ for $Σ^{-}\rightarrow nl^-\bar{ν_l}$ and $Ξ^0\rightarrowΣ^{+}l^-\bar{ν_l}$ semileptonic decays in the continuum limit with (2+1)-flavors of dynamical domain-wall fermions, using the Iwasaki gauge action at two different lattice spacings of $a$=0.114(2) and 0.086(2) fm. A theoretical estimation of flavor SU(3)-breaking effect on the vector coupling is required to extract $V_{us}$ from the experimental rate of hyperon beta decays. We obtain the vector couplings $f_1(0)$ for $Σ\rightarrow N$ and $Ξ\rightarrow Σ$ beta-decays with an accuracy of less than one percent. We then find that lattice results of $f_1(0)$ combined with the best estimate of $|V_{us}|$ with imposing Cabibbo-Kobayashi-Maskawa (CKM) unitarity are slightly deviated from the experimental result of $|V_{us}f_1(0)|$ for the $Σ\rightarrow N$ beta-decay. This discrepancy can be attributed to an assumption made in the experimental analysis on $|V_{us}f_1(0)|$, where the induced second-class form factor $g_2$ is set to be zero regardless of broken SU(3) symmetry. We report on this matter and then estimate the possible value of $g_2(0)$, which is evaluated from the experimental decay rate with our lattice result of $f_1(0)$ under the first-row CKM-unitarity condition. △ Less

Submitted 25 October, 2017; v1 submitted 14 August, 2017; originally announced August 2017.

Comments: 17 pages, 20 figures; v2: version published in PRD

Journal ref: Phys. Rev. D 96, 074509 (2017)

Numerical study of tree-level improved lattice gradient flows in pure Yang-Mills theory

Authors: Norihiko Kamata, Shoichi Sasaki

Abstract: We study several types of tree-level improvement in the Yang-Mills gradient flow method in order to reduce the lattice discretization errors in line with Fodor et al. [arXiv:1406.0827]. The tree-level $\mathcal{O}(a^2)$ improvement can be achieved in a simple manner, where an appropriate weighted average is computed between two definitions of the action density $\langle E(t)\rangle$ measured at ev… ▽ More We study several types of tree-level improvement in the Yang-Mills gradient flow method in order to reduce the lattice discretization errors in line with Fodor et al. [arXiv:1406.0827]. The tree-level $\mathcal{O}(a^2)$ improvement can be achieved in a simple manner, where an appropriate weighted average is computed between two definitions of the action density $\langle E(t)\rangle$ measured at every flow time $t$. We further develop the idea of achieving the tree-level $\mathcal{O}(a^4)$ improvement. For testing our proposal, we present numerical results for $\langle E(t) \rangle$ obtained on gauge configurations generated with the Wilson and Iwasaki gauge actions at three lattice spacings ($a\approx 0.1, 0.07,$ and 0.05 fm). Our results show that tree-level improved flows significantly eliminate the discretization corrections on $t^2\langle E(t)\rangle$ in the relatively small-$t$ regime. To demonstrate the feasibility of our tree-level improvement proposal, we also study the scaling behavior of the dimensionless combinations of the $Λ_{\overline{\textrm{MS}}}$ parameter and the new reference scale $t_X$, which is defined through $t_X^2\langle E(t_X)\rangle=X$ for the smaller $X$, e.g., $X= 0.15$. It is found that $\sqrt{t_{0.15}}Λ_{\overline{\textrm{MS}}}$ shows a nearly perfect scaling behavior as a function of $a^2$ regardless of the types of gauge action and flow, after tree-level improvement is achieved up to $\mathcal{O}(a^4)$. Further detailed study of the scaling behavior exposes the presence of the remnant $\mathcal{O}(g^{2n} a^2)$ corrections, which are beyond the tree level. Although our proposal is not enough to eliminate all $\mathcal{O}(a^2)$ effects, we show that the $\mathcal{O}(g^{2n} a^2)$ corrections can be well under control even by the simplest tree-level $\mathcal{O}(a^2)$ improved flow. △ Less

Submitted 12 March, 2017; v1 submitted 22 September, 2016; originally announced September 2016.

Comments: 16 pages, 14 figures. v3: a version published in PRD

Report number: Phys. Rev. D 95, 054501(2017)

Journal ref: Phys. Rev. D 95, 054501 (2017)

Bethe-Salpeter wave functions of $η_c(2S)$ and $ψ(2S)$ states from full lattice QCD

Authors: Kazuki Nochi, Taichi Kawanai, Shoichi Sasaki

Abstract: We discuss the internal structure of radially excited charmonium mesons based on the equal-time and Coulomb gauge Bethe-Salpeter (BS) amplitudes, which are obtained in lattice QCD. Our simulations are performed with a relativistic heavy-quark action for the charm quark on the 2+1 flavor PACS-CS gauge configurations at the lightest pion mass, $M_π=156(7)$ MeV. The variational method is applied to t… ▽ More We discuss the internal structure of radially excited charmonium mesons based on the equal-time and Coulomb gauge Bethe-Salpeter (BS) amplitudes, which are obtained in lattice QCD. Our simulations are performed with a relativistic heavy-quark action for the charm quark on the 2+1 flavor PACS-CS gauge configurations at the lightest pion mass, $M_π=156(7)$ MeV. The variational method is applied to the study of optimal charmonium operator for ground and first excited states of $S$-wave charmonia. We successfully calculate the BS wave functions of $η_c(2S)$ and $ψ(2S)$ states, as well as $η_c(1S)$ and $J/ψ$ states, and then estimate the root-mean-square radii of both the $1S$ and $2S$ charmonium states. We also examine whether a series of the BS wave functions from the ground state to excited states can be described by a single set of the spin-independent and spin-dependent interquark potentials with a unique quark mass. It is found that the quark kinetic mass and, both the central and spin-spin charmonium potentials, determined from the $2S$ wave functions, fairly agree with the ones from the $1S$ wave functions. This strongly supports the validity of the potential description for the charmonium system, at least, below open-charm threshold. △ Less

Submitted 30 January, 2017; v1 submitted 8 August, 2016; originally announced August 2016.

Comments: 12 pages, 6 figures; v2: version published in PRD

Journal ref: Phys. Rev. D 94, 114514 (2016)

Lattice gradient flow with tree-level $\mathcal{O}(a^4)$ improvement in pure Yang-Mills theory

Authors: Norihiko Kamata, Shoichi Sasaki

Abstract: Following a recent paper by Fodor et al. (arXiv:1406.0827), we reexamine several types of tree-level improvements on the flow action with various gauge actions in order to reduce the lattice discretization errors in the Yang-Mills gradient flow method. We propose two types of tree-level, $\mathcal{O}(a^4)$ improved lattice gradient flow including the rectangle term in both the flow and gauge actio… ▽ More Following a recent paper by Fodor et al. (arXiv:1406.0827), we reexamine several types of tree-level improvements on the flow action with various gauge actions in order to reduce the lattice discretization errors in the Yang-Mills gradient flow method. We propose two types of tree-level, $\mathcal{O}(a^4)$ improved lattice gradient flow including the rectangle term in both the flow and gauge action within the minimal way. We then perform numerical simulations with the simple plaquette gauge action for testing our proposal. Our numerical results of the expectation value of the action density, $\langle E(t)\rangle$, show that two $\mathcal{O}(a^4)$ improved flows significantly eliminate the discretization corrections in the small flow time $t$ regime. On the other hand, the values of $t^2\langle E(t)\rangle$ in the large $t$ regime, where the lattice spacing dependence of the tree-level term dies out as inverse powers of $t/a^2$, are different between the results given by two optimal flows leading to the same $\mathcal{O}(a^4)$ improvement at tree level. This may suggest that non-negligible $\mathcal{O}(g^2 a^2)$ effect sets in the large $t$ regime, where the running coupling $g(1/\sqrt{8t})$ becomes large. △ Less

Submitted 19 November, 2015; originally announced November 2015.

Comments: 7 pages, 2 figures, talk presented at Lattice 2015, PoS (LATTICE2015)

Potential description of charmonium and charmed-strange mesons from lattice QCD

Authors: Taichi Kawanai, Shoichi Sasaki

Abstract: We present spin-independent and spin-spin interquark potentials for the charmonium and charmed-strange mesons, which are calculated in 2+1 flavor lattice QCD simulations using the PACS-CS gauge configurations generated at the lightest pion mass ($M_π\approx 156(7)$~MeV) with a lattice cutoff of $a^{-1}\approx 2.2$ GeV and a spatial volume of $(3~{\rm fm})^3$. For the charm quark, we use a relativi… ▽ More We present spin-independent and spin-spin interquark potentials for the charmonium and charmed-strange mesons, which are calculated in 2+1 flavor lattice QCD simulations using the PACS-CS gauge configurations generated at the lightest pion mass ($M_π\approx 156(7)$~MeV) with a lattice cutoff of $a^{-1}\approx 2.2$ GeV and a spatial volume of $(3~{\rm fm})^3$. For the charm quark, we use a relativistic heavy quark (RHQ) action with fine tuned RHQ parameters, which closely reproduce both the experimental spin-averaged mass and hyper-fine splitting of the $1S$ charmonium. The interquark potential and the quark kinetic mass, both of which are key ingredients within the potential description of heavy-heavy and heavy-light mesons, are determined from the equal-time Bethe-Salpeter (BS) amplitude. The charmonium potentials are obtained from the BS wave function of $1S$ charmonia ($η_c$ and $J/ψ$ mesons), while the charmed-strange potential are calculated from the $D_s$ and $D_s^{\ast}$ heavy-light mesons. We then use resulting potentials and quark masses as purely theoretical inputs so as to solve the nonrelativistic Schrödinger equation for calculating accessible energy levels of charmonium and charmed-strange mesons without unknown parameters. The resultant spectra below the $D\bar{D}$ and $DK$ thresholds excellently agree with well-established experimental data. △ Less

Submitted 10 August, 2015; originally announced August 2015.

Comments: 23 pages, 13 figures

Journal ref: Phys. Rev. D 92, 094503 (2015)

Potential description of the charmonium from lattice QCD

Authors: Taichi Kawanai, Shoichi Sasaki

Abstract: We present spin-independent and spin-spin interquark potentials for charmonium states, that are calculated using a relativistic heavy quark action for charm quarks on the PACS-CS gauge configurations generated with the Iwasaki gauge action and 2+1 flavors of Wilson clover quark. The interquark potential with finite quark masses is defined through the equal-time Bethe-Salpeter amplitude. The light… ▽ More We present spin-independent and spin-spin interquark potentials for charmonium states, that are calculated using a relativistic heavy quark action for charm quarks on the PACS-CS gauge configurations generated with the Iwasaki gauge action and 2+1 flavors of Wilson clover quark. The interquark potential with finite quark masses is defined through the equal-time Bethe-Salpeter amplitude. The light and strange quark masses are close to the physical point where the pion mass corresponds to $M_π\approx 156(7)$ MeV, and charm quark mass is tuned to reproduce the experimental values of $η_c$ and $J/ψ$ states. Our simulations are performed with a lattice cutoff of $a^{-1}\approx 2.2$ GeV and a spatial volume of $(3 {\rm fm})^3$. We solve the nonrelativistic Schrödinger equation with resulting charmonium potentials as theoretical inputs. The resultant charmonium spectrum below the open charm threshold shows a fairly good agreement with experimental data of well-established charmonium states. △ Less

Submitted 19 March, 2015; originally announced March 2015.

Comments: 12 pages, 4 figures, the Proceedings of the Conference "XIth Quark Confinement and the Hadron Spectrum", September 8 to 12, Saint-Petersburg State University, Russia

Heavy quarkonium potential from Bethe-Salpeter wave function on the lattice

Authors: Taichi Kawanai, Shoichi Sasaki

Abstract: We propose a novel method for the determination of the interquark potential together with quark "kinetic mass'' $m_Q$ from the equal-time $Q\bar{Q}$ Bethe-Salpeter (BS) amplitude in lattice QCD. Our approach allows us to calculate spin-dependent $Q\bar{Q}$ potentials, e.g. the spin-spin potential, as well. In order to investigate several systematic uncertainties on such $Q\bar{Q}$ potentials, we c… ▽ More We propose a novel method for the determination of the interquark potential together with quark "kinetic mass'' $m_Q$ from the equal-time $Q\bar{Q}$ Bethe-Salpeter (BS) amplitude in lattice QCD. Our approach allows us to calculate spin-dependent $Q\bar{Q}$ potentials, e.g. the spin-spin potential, as well. In order to investigate several systematic uncertainties on such $Q\bar{Q}$ potentials, we carry out lattice QCD simulations using quenched gauge configurations generated with the single plaquette gauge action with three different lattice spacings, $a \approx$ 0.093, 0.068 and 0.047 fm, and two different physical volumes, $L \approx$ 2.2 and 3.0 fm. For heavy quarks, we employ the relativistic heavy quark (RHQ) action which can control large discretization errors introduced by large quark mass $m_Q$. The spin-independent central $Q\bar{Q}$ potential for the charmonium system yields the "Coulomb plus linear'' behavior with good scaling and small volume dependence. We explore the quark mass dependence over the wide mass range from the charm to beyond the bottom region, and then demonstrate that the spin-independent central $Q\bar{Q}$ potential in the $m_Q \to \infty$ limit is fairly consistent with the static $Q\bar{Q}$ potential obtained from Wilson loops. The spin-spin potential at finite quark mass provides a repulsive interaction with a finite range, which becomes narrower as the quark mass increases. We also discuss the applicability of the $1/m_Q$ expansion approach for the spin-spin potential. △ Less

Submitted 5 November, 2013; originally announced November 2013.

Comments: 20 pages, 18 figures

Journal ref: Phys. Rev. D 89, 054507 (2014)

Lüscher's finite size method with twisted boundary conditions: an application to $J/ψ$-$φ$ system to search for narrow resonance

Authors: Sho Ozaki, Shoichi Sasaki

Abstract: We investigate an application of twisted boundary conditions for study of low-energy hadron-hadron interactions with Lüshcer's finite size method. It allows us to calculate the phase shifts for elastic scattering of two hadrons at any small value of the scattering momentum even in a finite volume. We then can extract model independent information of low-energy scattering parameters such as the sca… ▽ More We investigate an application of twisted boundary conditions for study of low-energy hadron-hadron interactions with Lüshcer's finite size method. It allows us to calculate the phase shifts for elastic scattering of two hadrons at any small value of the scattering momentum even in a finite volume. We then can extract model independent information of low-energy scattering parameters such as the scattering length, the effective range and the effective volume from the $S$-wave and $P$-wave scattering phase shifts through the effective range expansion. This approach also enables us to examine the existence of near-threshold and narrow resonance states, of which characteristic is observed in many of newly discovered charmonium-like $XYZ$ mesons. As a simple example, we demonstrate our method for low-energy $J/ψ$-$φ$ scatterings to search for Y(4140) resonance using 2+1 flavor PACS-CS gauge configurations at the lightest pion mass, $m_π=156$ MeV. △ Less

Submitted 17 January, 2013; v1 submitted 23 November, 2012; originally announced November 2012.

Comments: 15 pages, 8 figures; v2: version published in Phys. Rev. D

Journal ref: Phys. Rev. D 87, 014506 (2013)

Hyperon vector form factor from 2+1 flavor lattice QCD

Authors: Shoichi Sasaki

Abstract: We present the first result for the hyperon vector form factor f_1 for Xi^0 -> Sigma^+ l bar{nu} and Sigma^- -> n l bar{nu} semileptonic decays from fully dynamical lattice QCD. The calculations are carried out with gauge configurations generated by the RBC and UKQCD collaborations with (2+1)-flavors of dynamical domain-wall fermions and the Iwasaki gauge action at beta=2.13, corresponding to a cu… ▽ More We present the first result for the hyperon vector form factor f_1 for Xi^0 -> Sigma^+ l bar{nu} and Sigma^- -> n l bar{nu} semileptonic decays from fully dynamical lattice QCD. The calculations are carried out with gauge configurations generated by the RBC and UKQCD collaborations with (2+1)-flavors of dynamical domain-wall fermions and the Iwasaki gauge action at beta=2.13, corresponding to a cutoff 1/a=1.73 GeV. Our results, which are calculated at the lighter three sea quark masses (the lightest pion mass down to approximately 330 MeV), show that a sign of the second-order correction of SU(3) breaking on the hyperon vector coupling f_1(0) is negative. The tendency of the SU(3) breaking correction observed in this work disagrees with predictions of both the latest baryon chiral perturbation theory result and large N_c analysis. △ Less

Submitted 26 November, 2012; v1 submitted 26 September, 2012; originally announced September 2012.

Comments: 7 pages, 12 figures, v2: typos corrected, and references added, v3: version published in PRD

Journal ref: Phys.Rev.D86:114502,2012

Interquark potential for the charmonium system with almost physical quark masses

Authors: Taichi Kawanai, Shoichi Sasaki

Abstract: We study an interquark QQ^bar potential for the charmonium system, that is determined from the the equal-time and Coulomb gauge QQ^bar Bethe-Salpeter (BS) wavefunction through the effective Schrödinger equation. This novel approach enables us to evaluate a kinetic heavy quark mass m_Q and a proper interquark potential at finite quark mass m_Q, which receives all orders of 1/m_Q corrections on the… ▽ More We study an interquark QQ^bar potential for the charmonium system, that is determined from the the equal-time and Coulomb gauge QQ^bar Bethe-Salpeter (BS) wavefunction through the effective Schrödinger equation. This novel approach enables us to evaluate a kinetic heavy quark mass m_Q and a proper interquark potential at finite quark mass m_Q, which receives all orders of 1/m_Q corrections on the static QQ^bar potential from Wilson loops, simultaneously. Precise information of the interquark potential for both charmonium and bottomonium states directly from lattice QCD provides us a chance to improve quark potential models, where the spin-independent interquark potential is phenomenologically described by the Cornell potential and the spin-dependent parts are deduced within the framework of perturbative QCD, from first-principles calculations. In this study, calculations are carried out in both quenched and dynamical fermion simulations. We first demonstrate that the interquark potential at finite quark mass calculated by the BS amplitude method smoothly approaches the conventional static heavy quark potential from Wilson loops in the infinitely heavy quark limit within quenched lattice QCD simulations. Secondly, we determine both spin-independent and -dependent parts of the interquark potential for the charmonium system in 2+1 flavor dynamical lattice QCD using the PACS-CS gauge configurations at the lightest pion mass, M_π=156 MeV. △ Less

Submitted 1 November, 2011; originally announced November 2011.

Comments: 7 pages, 5 figures; To appear in proceedings of 29th International Symposium on Lattice Field Theory, Lattice2011, July 10-16, 2011, Squaw Valley, Lake Tahoe, California, USA

Report number: TKYNT-11-11

Charmonium potential from full lattice QCD

Authors: Taichi Kawanai, Shoichi Sasaki

Abstract: We present both spin-independent and -dependent parts of a central interquark potential for charmonium states, which is calculated in 2+1 flavor dynamical lattice QCD using the PACS-CS gauge configurations with a lattice cutoff of a^{-1}~2.2 GeV. Our simulations are performed with a relativistic heavy quark action for the charm quark at the lightest pion mass, M_π=156(7) MeV, in a spatial volume o… ▽ More We present both spin-independent and -dependent parts of a central interquark potential for charmonium states, which is calculated in 2+1 flavor dynamical lattice QCD using the PACS-CS gauge configurations with a lattice cutoff of a^{-1}~2.2 GeV. Our simulations are performed with a relativistic heavy quark action for the charm quark at the lightest pion mass, M_π=156(7) MeV, in a spatial volume of 3fm^3. We observe that the spin-independent charmonium potential obtained from lattice QCD with almost physical quark masses is quite similar to the Conrnell potential used in non-relativistic potential models. The spin-spin potential properly exhibits the short range repulsive interaction, while its r-dependence is different from either a point-like spin-spin potential generated by one-gluon exchange or a phenomenological finite-range one adopted in quark potential models. △ Less

Submitted 3 June, 2012; v1 submitted 4 October, 2011; originally announced October 2011.

Comments: 5 pages, 3 figures

Report number: TKYNT-11-09

Journal ref: Phys. Rev. D 85: 091503(R), 2012

Complex Heavy-Quark Potential at Finite Temperature from Lattice QCD

Authors: Alexander Rothkopf, Tetsuo Hatsuda, Shoichi Sasaki

Abstract: We calculate for the first time the complex potential between a heavy quark and antiquark at finite temperature across the deconfinement transition in lattice QCD. The real and imaginary part of the potential at each separation distance $r$ is obtained from the spectral function of the thermal Wilson loop. We confirm the existence of an imaginary part above the critical temperature $T_C$, which gr… ▽ More We calculate for the first time the complex potential between a heavy quark and antiquark at finite temperature across the deconfinement transition in lattice QCD. The real and imaginary part of the potential at each separation distance $r$ is obtained from the spectral function of the thermal Wilson loop. We confirm the existence of an imaginary part above the critical temperature $T_C$, which grows as a function of $r$ and underscores the importance of collisions with the gluonic environment for the melting of heavy quarkonia in the quark-gluon-plasma. △ Less

Submitted 13 April, 2012; v1 submitted 7 August, 2011; originally announced August 2011.

Comments: 4 pages, 3 figures, to be published in PRL

Report number: TKYNT-11-10, RIKEN-QHP-8, BI-TP-2011/23

Hyperon vector coupling f_1(0) from 2+1 flavor lattice QCD

Authors: Shoichi Sasaki

Abstract: We present results for the hyperon vector form factor f_1 for $Ξ^0 \rightarrow Σ^+ l\barν$ and $Σ^- \rightarrow n l\barν$ semileptonic decays from dynamical lattice QCD with domain-wall quarks. Simulations are performed on the 2+1 flavor gauge configurations generated by the RBC and UKQCD Collaborations with a lattice cutoff of 1/a = 1.7 GeV. Our preliminary results, which are calculated at the li… ▽ More We present results for the hyperon vector form factor f_1 for $Ξ^0 \rightarrow Σ^+ l\barν$ and $Σ^- \rightarrow n l\barν$ semileptonic decays from dynamical lattice QCD with domain-wall quarks. Simulations are performed on the 2+1 flavor gauge configurations generated by the RBC and UKQCD Collaborations with a lattice cutoff of 1/a = 1.7 GeV. Our preliminary results, which are calculated at the lightest sea quark mass (pion mass down to approximately 330 MeV), show that a sign of the second-order correction of SU(3) breaking on hyperon vector coupling f_1(0) is likely negative. △ Less

Submitted 24 February, 2011; originally announced February 2011.

Comments: 4 pages, 2 figures, talk given at International Conference on the Structure of Baryons (BARYONS'10), Osaka, Japan, Dec. 7-11, 2010

Report number: TKYNT-11-04

Interquark potential with finite quark mass from lattice QCD

Authors: Taichi Kawanai, Shoichi Sasaki

Abstract: We present an investigation of the interquark potential determined from the qq^bar Bethe-Salpeter (BS) amplitude for heavy quarkonia in lattice QCD. The qq^bar potential at finite quark mass m_q can be calculated from the equal-time and Coulomb gauge BS amplitude through the effective Schrödinger equation. The definition of the potential itself requires information about a kinetic mass of the quar… ▽ More We present an investigation of the interquark potential determined from the qq^bar Bethe-Salpeter (BS) amplitude for heavy quarkonia in lattice QCD. The qq^bar potential at finite quark mass m_q can be calculated from the equal-time and Coulomb gauge BS amplitude through the effective Schrödinger equation. The definition of the potential itself requires information about a kinetic mass of the quark. We then propose a self-consistent determination of the quark kinetic mass on the same footing. To verify the proposed method, we perform quenched lattice QCD simulations with a relativistic heavy quark action at a lattice cutoff of 1/a ~ 2.1 GeV in a range of the quark kinetic mass, 1.0 {\ge} m_q {\ge} 3.6 GeV. Our numerical results show that the qq^bar potential in the infinitely heavy quark limit (m_q -> {\infty}) is fairly consistent with the conventional one obtained from Wilson loops. The quark mass dependence of the qq^bar potential and the spin-spin potential are also examined. △ Less

Submitted 5 August, 2011; v1 submitted 16 February, 2011; originally announced February 2011.

Comments: 4 pages, 3 figures

Report number: TKYNT-11-2

Journal ref: Phys. Rev. Lett. 107: 091601,2011

Charmonium-nucleon interaction from lattice QCD with a relativistic heavy quark action

Authors: Taichi Kawanai, Shoichi Sasaki

Abstract: Detailed information of the low-energy interaction between the charmonia (ηc and J/ψ) and the nucleon is indispensable for exploring the formation of charmonium bound to nuclei. In order to investigate the charmonium-nucleon interactions at low energies, we adopt two essentially different approaches in lattice QCD simulations. The charmonium-nucleon potential can be calculated from the equal-tim… ▽ More Detailed information of the low-energy interaction between the charmonia (ηc and J/ψ) and the nucleon is indispensable for exploring the formation of charmonium bound to nuclei. In order to investigate the charmonium-nucleon interactions at low energies, we adopt two essentially different approaches in lattice QCD simulations. The charmonium-nucleon potential can be calculated from the equal-time Bethe-Salpeter amplitude through the effective Schrödinger equation. This novel method is based on the same idea originally applied for the nucleon force by Aoki- Hatsuda-Ishii. Another approach is to utilize extended Lüscher's formula with partially twisted boundary conditions, which allows us to calculate the s-wave phase shift at any small value of the relative momentum even in a finite box. We then extract model independent information of the scattering length and the effective range from the phase shift through the effective-range expansion. Our simulations are carried out at a lattice cutoff of $1/a \approx$ 2 GeV in a spatial volume of (3 fm)^3 with the non-perturbatively O(a)-improved Wilson fermions for the light quarks and a relativistic heavy quark action for the charm quark. Although our main results are calculated in quenched lattice calculations, we also present a preliminary full QCD result by using the 2+1 flavor gauge configurations generated by PACS-CS Collaboration. We have found that the charmonium-nucleon potential is weakly attractive at short distances and exponentially screened at large distances. We have also successfully evaluated both the scattering length and effective range from the charmonium-nucleon scattering phase shift. △ Less

Submitted 5 November, 2010; originally announced November 2010.

Comments: 13 pages, 9 figures; To appear in proceedings of 28th International Symposium on Lattice Field Theory, Lattice2010, June 14-19, 2010, Villasimius, Italy

Report number: TKYNT-10-22

Journal ref: PoS Lattice2010:156,2010

Charmonium-nucleon potential from lattice QCD

Authors: Taichi Kawanai, Shoichi Sasaki

Abstract: We present results for charmonium-nucleon potential $V_{c\bar{c}-N}(r)$ from quenched lattice QCD, which is calculated from the equal-time Bethe-Salpeter amplitude through the effective Schrödinger equation. Detail information of the low-energy interaction between the nucleon and charmonia ($η_c$ and $J/ψ$) is indispensable for exploring the formation of charmonium bound to nuclei. Our simulations… ▽ More We present results for charmonium-nucleon potential $V_{c\bar{c}-N}(r)$ from quenched lattice QCD, which is calculated from the equal-time Bethe-Salpeter amplitude through the effective Schrödinger equation. Detail information of the low-energy interaction between the nucleon and charmonia ($η_c$ and $J/ψ$) is indispensable for exploring the formation of charmonium bound to nuclei. Our simulations are performed at a lattice cutoff of $1/a\approx 2.1$ GeV in a spatial volume of $(3 fm)^3$ with the nonperturbatively $O(a)$ improved Wilson action for the light quarks and a relativistic heavy quark action for the charm quark. We have found that the potential $V_{c\bar{c}-N}(r)$ for either the $η_c$ and $J/ψ$ states is weakly attractive at short distances and exponentially screened at large distances. The spin averaged $J/ψ$-$N$ potential is slightly more attractive than that of the $η_c$-$N$ case. △ Less

Submitted 7 October, 2010; v1 submitted 17 September, 2010; originally announced September 2010.

Comments: 5 pages, 5 figures, v2: version accepted for publication in PRD Rapid Communications

Report number: TKYNT-10-14

Journal ref: Phys.Rev.D82:091501,2010

Study of charmonium-nucleon interaction in lattice QCD

Authors: Taichi Kawanai, Shoichi Sasaki

Abstract: We report preliminary results for charmonium-nucleon potential $V_{c\bar{c} N}(r)$ from quenched lattice QCD, which is calculated from the equal-time Bethe-Salpeter amplitude through the effective Schrödinger equation. Our simulations are performed at a lattice cutoff of $1/a$=2.0 GeV in a spatial volume of $(3\;\text{fm})^3$ with the nonperturbatively $O(a)$ improved Wilson action for the light q… ▽ More We report preliminary results for charmonium-nucleon potential $V_{c\bar{c} N}(r)$ from quenched lattice QCD, which is calculated from the equal-time Bethe-Salpeter amplitude through the effective Schrödinger equation. Our simulations are performed at a lattice cutoff of $1/a$=2.0 GeV in a spatial volume of $(3\;\text{fm})^3$ with the nonperturbatively $O(a)$ improved Wilson action for the light quarks and a relativistic heavy quark action for the charm quark. We have found that the potential $V_{c\bar{c} N}(r)$ is weakly attractive at short distance and exponentially screened at long distance. △ Less

Submitted 9 July, 2010; originally announced July 2010.

Comments: 4 pages, 4 figures. To appear in proceedings of the XI HADRON PHYSICS, March, 21 - 26, 2010, Maresias Beach, São Paulo, Brazil

Report number: TKYNT-10-07

Journal ref: AIP Conf.Proc.1296:294-297,2010

Nucleon isovector structure functions in (2+1)-flavor QCD with domain wall fermions

Authors: Yasumichi Aoki, Tom Blum, Huey-Wen Lin, Shigemi Ohta, Shoichi Sasaki, Robert Tweedie, Takeshi Yamazaki, James Zanotti

Abstract: We report on numerical lattice QCD calculations of some of the low moments of the nucleon structure functions. The calculations are carried out with gauge configurations generated by the RBC and UKQCD collaborations with (2+1)-flavors of dynamical domain wall fermions and the Iwasaki gauge action ($β= 2.13$). The inverse lattice spacing is $a^{-1} = 1.73$ GeV, and two spatial volumes of ((2.7{\rm… ▽ More We report on numerical lattice QCD calculations of some of the low moments of the nucleon structure functions. The calculations are carried out with gauge configurations generated by the RBC and UKQCD collaborations with (2+1)-flavors of dynamical domain wall fermions and the Iwasaki gauge action ($β= 2.13$). The inverse lattice spacing is $a^{-1} = 1.73$ GeV, and two spatial volumes of ((2.7{\rm fm})^3) and ((1.8 {\rm fm})^3) are used. The up and down quark masses are varied so the pion mass lies between 0.33 and 0.67 GeV while the strange mass is about 12 % heavier than the physical one. The structure function moments we present include fully non-perturbatively renormalized iso-vector quark momentum fraction, (< x >_{u-d}), helicity fraction, (< x >_{Δu - Δd}), and transversity, (< 1 >_{δu - δd}), as well as an unrenormalized twist-3 coefficient, (d_1). The ratio of the momentum to helicity fractions, (< x >_{u-d}/< x >_{Δu - Δd}), does not show dependence on the light quark mass and agrees well with the value obtained from experiment. Their respective absolute values, fully renormalized, show interesting trends toward their respective experimental values at the lightest quark mass. A prediction for the transversity, (0.7 < < 1 >_{δu -δd} < 1.1), in the (\bar{\rm MS}) scheme at 2 GeV is obtained. The twist-3 coefficient, (d_1), though yet to be renormalized, supports the perturbative Wandzura-Wilczek relation. △ Less

Submitted 17 March, 2010; originally announced March 2010.

Comments: 14 pages, 22 figures.

Journal ref: Phys.Rev.D82:014501,2010

Proper heavy-quark potential from a spectral decomposition of the thermal Wilson loop

Authors: A. Rothkopf, T. Hatsuda, S. Sasaki

Abstract: We propose a non-perturbative and gauge invariant derivation of the static potential between a heavy-quark ($Q$) and an anti-quark ($\bar{Q}$) at finite temperature. This proper potential is defined through the spectral function (SPF) of the thermal Wilson loop and can be shown to satisfy the Schrödinger equation for the heavy $Q\bar{Q}$ pair in the thermal medium. In general, the proper potenti… ▽ More We propose a non-perturbative and gauge invariant derivation of the static potential between a heavy-quark ($Q$) and an anti-quark ($\bar{Q}$) at finite temperature. This proper potential is defined through the spectral function (SPF) of the thermal Wilson loop and can be shown to satisfy the Schrödinger equation for the heavy $Q\bar{Q}$ pair in the thermal medium. In general, the proper potential has a real and an imaginary part,corresponding to the peak position and width of the SPF. The validity of using a Schrödinger equation for heavy $Q\bar{Q}$ can also be checked from the structure of the SPF. To test this idea, quenched QCD simulations on anisotropic lattices ($a_σ=4a_τ=0.039\rm fm$, $N^3_σ\times N_τ =20^2 \times (96-32)$) are performed. The real part of the proper potential below the deconfinement temperature ($T=0.78T_c$) exhibits the well known Coulombic and confining behavior. At ($T=2.33T_c$) we find that it coincides with the Debye screened potential obtained from Polyakov-line correlations in the color-singlet channel under Coulomb gauge fixing. The physical meaning of the spectral structure of the thermal Wilson loop and the use of the maximum entropy method (MEM) to extract the real and imaginary part of the proper potential are also discussed. △ Less

Submitted 13 October, 2009; originally announced October 2009.

Comments: 7 pages, 8 figures, Talk given at the XXVII International Symposium on Lattice Field Theory (LATTICE 2009), July 25-31, 2009, Beijing, China

Report number: TKYNT-09-21

Journal ref: PoS LAT2009:162,2009

Nucleon form factors with 2+1 flavor dynamical domain-wall fermions

Authors: Takeshi Yamazaki, Yasumichi Aoki, Tom Blum, Huey-Wen Lin, Shigemi Ohta, Shoichi Sasaki, Robert Tweedie, James Zanotti

Abstract: We report our numerical lattice QCD calculations of the isovector nucleon form factors for the vector and axialvector currents: the vector, induced tensor, axialvector, and induced pseudoscalar form factors. The calculation is carried out with the gauge configurations generated with N_f=2+1 dynamical domain wall fermions and Iwasaki gauge actions at beta = 2.13, corresponding to a cutoff 1/a = 1… ▽ More We report our numerical lattice QCD calculations of the isovector nucleon form factors for the vector and axialvector currents: the vector, induced tensor, axialvector, and induced pseudoscalar form factors. The calculation is carried out with the gauge configurations generated with N_f=2+1 dynamical domain wall fermions and Iwasaki gauge actions at beta = 2.13, corresponding to a cutoff 1/a = 1.73 GeV, and a spatial volume of (2.7 fm)^3. The up and down quark masses are varied so the pion mass lies between 0.33 and 0.67 GeV while the strange quark mass is about 12% heavier than the physical one. We calculate the form factors in the range of momentum transfers, 0.2 < q^2 < 0.75 GeV^2. The vector and induced tensor form factors are well described by the conventional dipole forms and result in significant underestimation of the Dirac and Pauli mean-squared radii and the anomalous magnetic moment compared to the respective experimental values. We show that the axialvector form factor is significantly affected by the finite spatial volume of the lattice. In particular in the axial charge, g_A/g_V, the finite volume effect scales with a single dimensionless quantity, m_pi L, the product of the calculated pion mass and the spatial lattice extent. Our results indicate that for this quantity, m_pi L > 6 is required to ensure that finite volume effects are below 1%. △ Less

Submitted 13 April, 2009; originally announced April 2009.

Comments: 47 pages, 31 figures

Report number: Edinburgh 2008/51, KEK-TH-1282, RBRC-762, TKYNT-09-05, YITP-08-100

Journal ref: Phys.Rev.D79:114505,2009

Lattice study of flavor SU(3) breaking in hyperon beta decay

Authors: Shoichi Sasaki, Takeshi Yamazaki

Abstract: We present a quenched lattice calculation of all six form factors: vector [f_1(q^2)], weak magnetism [f_2(q^2)], induced scalar [f_3(q^2)], axial-vector [g_1(q^2)], weak electricity [g_2(q^2)] and induce pseudoscalar [g_3(q^2)] form factors in hyperon semileptonic decay Xi^0 -> Sigma^{+} l nu using domain wall fermions. The q^2 dependences of all form factors in the relatively low q^2 region are… ▽ More We present a quenched lattice calculation of all six form factors: vector [f_1(q^2)], weak magnetism [f_2(q^2)], induced scalar [f_3(q^2)], axial-vector [g_1(q^2)], weak electricity [g_2(q^2)] and induce pseudoscalar [g_3(q^2)] form factors in hyperon semileptonic decay Xi^0 -> Sigma^{+} l nu using domain wall fermions. The q^2 dependences of all form factors in the relatively low q^2 region are examined in order to evaluate their values at zero momentum transfer. The Xi^0 -> Sigma^+ transition is highly sensitive to flavor SU(3) breaking since this decay corresponds to the direct analogue of neutron beta decay under the exchange of the down quark with the strange quark. The pattern of flavor SU(3) breaking effects in the hyperon beta decay is easily exposed in a comparison to results for neutron beta decay. We measure SU(3)-breaking corrections to f_1(0), f_2(0)/f_1(0) and g_1(0)/f_1(0). A sign of the leading order corrections, of which the size is less than a few %, on f_1(0) is likely negative, while f_2(0)/f_1(0) and g_1(0)/f_1(0) receive positive corrections of order 16% and 5% respectively. The observed patterns of the deviation from the values in the exact SU(3) limit does not support some of model estimates. We show that there are nonzero second-class form factors in the Xi^0 -> Sigma^+ decay, measuring f_3(0)/f_1(0)=0.14(10) and g_2(0)/g_1(0)=0.68(18), which are comparable to the size of first-order SU(3) breaking. It is also found that the SU(3) breaking effect on g_3(0)/g_1(0) agree with the prediction of the generalized pion-pole dominance. △ Less

Submitted 10 April, 2009; v1 submitted 10 November, 2008; originally announced November 2008.

Comments: 31 pages, 28 figures, version to appear in Phys. Rev. D

Report number: TKYNT-08-27, YITP-08-86

Journal ref: Phys.Rev.D79:074508,2009

Physical Results from 2+1 Flavor Domain Wall QCD and SU(2) Chiral Perturbation Theory

Authors: C. Allton, D. J. Antonio, Y. Aoki, T. Blum, P. A. Boyle, N. H. Christ, S. D. Cohen, M. A. Clark, C. Dawson, M. A. Donnellan, J. M. Flynn, A. Hart, T. Izubuchi, A. Juttner, C. Jung, A. D. Kennedy, R. D. Kenway, M. Li, S. Li, M. F. Lin, R. D. Mawhinney, C. M. Maynard, S. Ohta, B. J. Pendleton, C. T. Sachrajda , et al. (7 additional authors not shown)

Abstract: We have simulated QCD using 2+1 flavors of domain wall quarks on a $(2.74 {\rm fm})^3$ volume with an inverse lattice scale of $a^{-1} = 1.729(28)$ GeV. The up and down (light) quarks are degenerate in our calculations and we have used four values for the ratio of light quark masses to the strange (heavy) quark mass in our simulations: 0.217, 0.350, 0.617 and 0.884. We have measured pseudoscalar… ▽ More We have simulated QCD using 2+1 flavors of domain wall quarks on a $(2.74 {\rm fm})^3$ volume with an inverse lattice scale of $a^{-1} = 1.729(28)$ GeV. The up and down (light) quarks are degenerate in our calculations and we have used four values for the ratio of light quark masses to the strange (heavy) quark mass in our simulations: 0.217, 0.350, 0.617 and 0.884. We have measured pseudoscalar meson masses and decay constants, the kaon bag parameter $B_K$ and vector meson couplings. We have used SU(2) chiral perturbation theory, which assumes only the up and down quark masses are small, and SU(3) chiral perturbation theory to extrapolate to the physical values for the light quark masses. While next-to-leading order formulae from both approaches fit our data for light quarks, we find the higher order corrections for SU(3) very large, making such fits unreliable. We also find that SU(3) does not fit our data when the quark masses are near the physical strange quark mass. Thus, we rely on SU(2) chiral perturbation theory for accurate results. We use the masses of the $Ω$ baryon, and the $π$ and $K$ mesons to set the lattice scale and determine the quark masses. We then find $f_π= 124.1(3.6)_{\rm stat}(6.9)_{\rm syst} {\rm MeV}$, $f_K = 149.6(3.6)_{\rm stat}(6.3)_{\rm syst} {\rm MeV}$ and $f_K/f_π= 1.205(0.018)_{\rm stat}(0.062)_{\rm syst}$. Using non-perturbative renormalization to relate lattice regularized quark masses to RI-MOM masses, and perturbation theory to relate these to $\bar{\rm MS}$ we find $ m_{ud}^{\bar{\rm MS}}(2 {\rm GeV}) = 3.72(0.16)_{\rm stat}(0.33)_{\rm ren}(0.18)_{\rm syst} {\rm MeV}$ and $m_{s}^{\bar{\rm MS}}(2 {\rm GeV}) = 107.3(4.4)_{\rm stat}(9.7)_{\rm ren}(4.9)_{\rm syst} {\rm MeV}$. △ Less

Submitted 3 April, 2008; originally announced April 2008.

Comments: 133 pages, 25 figures

Report number: BNL-HET-08/5, CU-TP-1182, Edinburgh 2008/06, KEK-TH-1232, RBRC-730, SHEP-0812

Journal ref: Phys.Rev.D78:114509,2008

Nucleon structure with two flavors of dynamical domain-wall fermions

Authors: Huey-Wen Lin, Tom Blum, Shigemi Ohta, Shoichi Sasaki, Takeshi Yamazaki

Abstract: We present a numerical lattice quantum chromodynamics calculation of isovector form factors and the first few moments of the isovector structure functions of the nucleon. The calculation employs two degenerate dynamical flavors of domain-wall fermions, resulting in good control of chiral symmetry breaking. Non-perturbative renormalization of the relevant quark currents is performed where necessa… ▽ More We present a numerical lattice quantum chromodynamics calculation of isovector form factors and the first few moments of the isovector structure functions of the nucleon. The calculation employs two degenerate dynamical flavors of domain-wall fermions, resulting in good control of chiral symmetry breaking. Non-perturbative renormalization of the relevant quark currents is performed where necessary. The inverse lattice spacing, $a^{-1}$, is about 1.7 GeV. We use degenerate up and down dynamical quark masses around 1, 3/4 and 1/2 the strange quark mass. The physical volume of the lattice is about $(1.9{fm})^3$. The ratio of the isovector vector to axial charges, $g_A/g_V$, trends a bit lower than the experimental value as the quark mass is reduced toward the physical point. We calculate the momentum-transfer dependences of the isovector vector, axial, induced tensor and induced pseudoscalar form factors. The Goldberger-Treiman relation holds at low momentum transfer and yields a pion-nucleon coupling, $g_{πNN} = 15.5(1.4)$, where the quoted error is only statistical. We find that the flavor non-singlet quark momentum fraction $<x>_{u-d}$ and quark helicity fraction $<x>_{Δu-Δd}$ overshoot their experimental values after linear chiral extrapolation. We obtain the transversity, $<1 >_{δu-δd} = 0.93(6)$ in $\bar{\rm MS}$ at 2 GeV and a twist-3 polarized moment, $d_1$, appears small, suggesting that the Wandzura-Wilczek relation holds approximately. We discuss the systematic errors in the calculation, with particular attention paid to finite-volume effects, excited-state contamination, and chiral extrapolations. △ Less

Submitted 6 February, 2008; originally announced February 2008.

Comments: 28 pages in two columns; 37 figures, 12 tables

Journal ref: Phys.Rev.D78:014505,2008

Nucleon axial charge in 2+1 flavor dynamical lattice QCD with domain wall fermions

Authors: T. Yamazaki, Y. Aoki, T. Blum, H. W. Lin, M. F. Lin, S. Ohta, S. Sasaki, R. J. Tweedie, J. M. Zanotti

Abstract: We present results for the nucleon axial charge g_A at a fixed lattice spacing of 1/a=1.73(3) GeV using 2+1 flavors of domain wall fermions on size 16^3x32 and 24^3x64lattices (L=1.8 and 2.7 fm) with length 16 in the fifth dimension. The length of the Monte Carlo trajectory at the lightest m_πis 7360 units, including 900 for thermalization. We find finite volume effects are larger than the pion… ▽ More We present results for the nucleon axial charge g_A at a fixed lattice spacing of 1/a=1.73(3) GeV using 2+1 flavors of domain wall fermions on size 16^3x32 and 24^3x64lattices (L=1.8 and 2.7 fm) with length 16 in the fifth dimension. The length of the Monte Carlo trajectory at the lightest m_πis 7360 units, including 900 for thermalization. We find finite volume effects are larger than the pion mass dependence at m_π= 330 MeV. We also find that g_A exhibits a scaling with the single variable m_πL which can also be seen in previous two-flavor domain wall and Wilson fermion calculati ons. Using this scaling to eliminate the finite-volume effect, we obtain g_A = 1.20(6)(4) at the physical pion mass, m_π= 135 MeV, where the first and second errors are statistical and systematic. The observed finite-volume scaling also appears in similar quenched simulations, but disappear when V\ge (2.4 fm)^3. We argue this is a dynamical quark effect. △ Less

Submitted 3 July, 2008; v1 submitted 25 January, 2008; originally announced January 2008.

Comments: 4 pages and 3 figures

Report number: Edinburgh 2007/44, KEK-TH-1192, RBRC-693

Journal ref: Phys.Rev.Lett.100:171602,2008

Kl3 semileptonic form factor from 2+1 flavour lattice QCD

Authors: P. A. Boyle, A. Jüttner, R. D. Kenway, C. T. Sachrajda, S. Sasaki, A. Soni, R. J. Tweedie, J. M. Zanotti

Abstract: We present the first results for the Kl3 form factor from simulations with 2+1 flavours of dynamical domain wall quarks. Combining our result, namely f_+(0)=0.964(5), with the latest experimental results for Kl3 decays leads to |V_{us}|=0.2249(14), reducing the uncertaintity in this important parameter. For the O(p^6) term in the chiral expansion we obtain Δf=-0.013(5). We present the first results for the Kl3 form factor from simulations with 2+1 flavours of dynamical domain wall quarks. Combining our result, namely f_+(0)=0.964(5), with the latest experimental results for Kl3 decays leads to |V_{us}|=0.2249(14), reducing the uncertaintity in this important parameter. For the O(p^6) term in the chiral expansion we obtain Δf=-0.013(5). △ Less

Submitted 22 December, 2008; v1 submitted 26 October, 2007; originally announced October 2007.

Comments: 4 pages, 3 figures, 4 tables, matches version appearing in Phys.Rev.Lett

Report number: BNL-HET-07/19, Edinburgh 2007/38, MKPH-T-07-16, RBRC-699, SHEP-0743

Journal ref: Phys.Rev.Lett.100:141601,2008

Nucleon form factors from quenched lattice QCD with domain wall fermions

Authors: Shoichi Sasaki, Takeshi Yamazaki

Abstract: We present a quenched lattice calculation of the weak nucleon form factors: vector (F_V(q^2)), induced tensor (F_T(q^2)), axial-vector (F_A(q^2)) and induced pseudo-scalar (F_P(q^2)) form factors. Our simulations are performed on three different lattice sizes L^3 x T=24^3 x 32, 16^3 x 32 and 12^3 x 32 with a lattice cutoff of 1/a = 1.3 GeV and light quark masses down to about 1/4 the strange qua… ▽ More We present a quenched lattice calculation of the weak nucleon form factors: vector (F_V(q^2)), induced tensor (F_T(q^2)), axial-vector (F_A(q^2)) and induced pseudo-scalar (F_P(q^2)) form factors. Our simulations are performed on three different lattice sizes L^3 x T=24^3 x 32, 16^3 x 32 and 12^3 x 32 with a lattice cutoff of 1/a = 1.3 GeV and light quark masses down to about 1/4 the strange quark mass (m_{pi} = 390 MeV) using a combination of the DBW2 gauge action and domain wall fermions. The physical volume of our largest lattice is about (3.6 fm)^3, where the finite volume effects on form factors become negligible and the lower momentum transfers (q^2 = 0.1 GeV^2) are accessible. The q^2-dependences of form factors in the low q^2 region are examined. It is found that the vector, induced tensor, axial-vector form factors are well described by the dipole form, while the induced pseudo-scalar form factor is consistent with pion-pole dominance. We obtain the ratio of axial to vector coupling g_A/g_V=F_A(0)/F_V(0)=1.219(38) and the pseudo-scalar coupling g_P=m_{mu}F_P(0.88m_{mu}^2)=8.15(54), where the errors are statistical erros only. These values agree with experimental values from neutron beta decay and muon capture on the proton. However, the root mean squared radii of the vector, induced tensor and axial-vector underestimate the known experimental values by about 20%. We also calculate the pseudo-scalar nucleon matrix element in order to verify the axial Ward-Takahashi identity in terms of the nucleon matrix elements, which may be called as the generalized Goldberger-Treiman relation. △ Less

Submitted 10 April, 2009; v1 submitted 20 September, 2007; originally announced September 2007.

Comments: 46 pages, 44 figures, v2: one section (including four new figures and several new tables) added for comparison with other studies, conclusions remain unchanged, v3: accepted version, v4: published version in PRD

Journal ref: Phys.Rev.D78:014510,2008

Identification of shallow two-body bound states in finite volume

Authors: Shoichi Sasaki, Takeshi Yamazaki

Abstract: We discuss signatures of bound-state formation in finite volume via the Luscher finite size method. Assuming that the phase-shift formula in this method inherits all aspects of the quantum scattering theory, we may expect that the bound-state formation induces the sign of the scattering length to be changed. If it were true, this fact provides us a distinctive identification of a shallow bound s… ▽ More We discuss signatures of bound-state formation in finite volume via the Luscher finite size method. Assuming that the phase-shift formula in this method inherits all aspects of the quantum scattering theory, we may expect that the bound-state formation induces the sign of the scattering length to be changed. If it were true, this fact provides us a distinctive identification of a shallow bound state even in finite volume through determination of whether the second lowest energy state appears just above the threshold. We also consider the bound-state pole condition in finite volume, based on Luscher's phase-shift formula and then find that the condition is fulfilled only in the infinite volume limit, but its modification by finite size corrections is exponentially suppressed by the spatial lattice size L. These theoretical considerations are also numerically checked through lattice simulations to calculate the positronium spectrum in compact scalar QED, where the short-range interaction between an electron and a positron is realized in the Higgs phase. △ Less

Submitted 7 September, 2007; originally announced September 2007.

Comments: 7 pages, 7 figures, talk presented at the XXV International Symposium on Lattice Field Theory, July 30 - August 4 2007, Regensburg, Germany

Journal ref: PoSLAT2007:131,2007

K_l3 form factor with N_f=2+1 dynamical domain wall fermions: A progress report

Authors: D. J. Antonio, P. A. Boyle, C. Dawson, T. Izubuchi, A. Jüttner, C. Sachrajda, S. Sasaki, A. Soni, R. J. Tweedie, J. M. Zanotti

Abstract: We present the latest results from the UKQCD/RBC collaborations for the K_l3 form factor with 2+1 flavours of dynamical domain wall quarks. Simulations are performed on 16^3x32x16 and 24^3x64x16 lattices with three values of the light quark mass, allowing for an extrapolation to the chiral limit. After interpolating to zero momentum transfer, we obtain the preliminary result f_+^{Kπ}(0)=0.9609(5… ▽ More We present the latest results from the UKQCD/RBC collaborations for the K_l3 form factor with 2+1 flavours of dynamical domain wall quarks. Simulations are performed on 16^3x32x16 and 24^3x64x16 lattices with three values of the light quark mass, allowing for an extrapolation to the chiral limit. After interpolating to zero momentum transfer, we obtain the preliminary result f_+^{Kπ}(0)=0.9609(51) (or Δf = -0.0161(51)), which is in agreement with the result of Leutwyler & Roos. △ Less

Submitted 27 February, 2007; originally announced February 2007.

Comments: 4 pages, 4 figures. Talk presented at CKM2006, Nagoya, Japan

Report number: Edinburgh 2007/4, SHEP-0706