Showing 1–50 of 81 results for author: Tytgat, M

ECFA Higgs, electroweak, and top Factory Study

Authors: H. Abidi, J. A. Aguilar-Saavedra, S. Airen, S. Ajmal, M. Al-Thakeel, G. L. Alberghi, J. Alcaraz Maestre, J. Alimena, S. Alshamaily, J. Altmann, W. Altmannshofer, Y. Amhis, A. Amiri, A. Andreazza, S. Antusch, O. Arnaez, K. A. Assamagan, S. Aumiller, K. Azizi, P. Azzi, P. Azzurri, E. Bagnaschi, Z. Baharyioon, H. Bahl, V. Balagura , et al. (346 additional authors not shown)

Abstract: The ECFA Higgs, electroweak, and top Factory Study ran between 2021 and 2025 as a broad effort across the experimental and theoretical particle physics communities, bringing together participants from many different proposed future collider projects. Activities across three main working groups advanced the joint development of tools and analysis techniques, fostered new considerations of detector… ▽ More The ECFA Higgs, electroweak, and top Factory Study ran between 2021 and 2025 as a broad effort across the experimental and theoretical particle physics communities, bringing together participants from many different proposed future collider projects. Activities across three main working groups advanced the joint development of tools and analysis techniques, fostered new considerations of detector design and optimisation, and led to a new set of studies resulting in improved projected sensitivities across a wide physics programme. This report demonstrates the significant expansion in the state-of-the-art understanding of the physics potential of future e+e- Higgs, electroweak, and top factories, and has been submitted as input to the 2025 European Strategy for Particle Physics Update. △ Less

Submitted 18 June, 2025; originally announced June 2025.

Report number: CERN-2025-005

The ILD Detector: A Versatile Detector for an Electron-Positron Collider at Energies up to 1 TeV

Authors: H. Abramowicz, D. Ahmadi, J. Alcaraz, O. Alonso, L. Andricek, J. Anguiano, O. Arquero, F. Arteche, D. Attie, O. Bach, M. Basso, J. Baudot, A. Bean, T. Behnke, A. Bellerive, Y. Benhammou, M. Berggren, G. Bertolone, M. Besancon, A. Besson, O. Bezshyyko, G. Blazey, B. Bliewert, J. Bonis, R. Bosley , et al. (254 additional authors not shown)

Abstract: The International Large Detector, ILD, is a detector concept for an experiment at a future high energy lepton collider. The detector has been optimised for precision physics in a range of energies from 90~GeV to about 1~TeV. ILD features a high precision, large volume combined silicon and gaseous tracking system, together with a high granularity calorimeter, all inside a central solenoidal magneti… ▽ More The International Large Detector, ILD, is a detector concept for an experiment at a future high energy lepton collider. The detector has been optimised for precision physics in a range of energies from 90~GeV to about 1~TeV. ILD features a high precision, large volume combined silicon and gaseous tracking system, together with a high granularity calorimeter, all inside a central solenoidal magnetic field. The paradigm of particle flow has been the guiding principle of the design of ILD. ILD is based mostly on technologies which have been demonstrated by extensive research and test programs. The ILD concept is proposed both for linear and circular lepton collider, be it at CERN or elsewhere. The concept has been developed by a group of nearly 60 institutes from around the world, and offers a well developed and powerful environment for science and technology studies at lepton colliders. In this document, the required performance of the detector, the proposed implementation and the readiness of the different technologies needed for the implementation are discussed. △ Less

Submitted 6 June, 2025; originally announced June 2025.

Comments: Submitted to the EPSSU2024

Updates on MURAVES Project at Mt. Vesuvius

Authors: Yanwen Hong, Marwa Al Moussawi, Fabio Ambrosino, Antonio Anastasio, Samip Basnet, Lorenzo Bonechi, Diletta Borselli, Alan Bross, Antonio Caputo, Roberto Ciaranfi, Luigi Cimmino, Vitaliano Ciulli, Raffaello D Alessandro, Catalin Frosin, Gabor Nyitrai, Andrea Giammanco, Flora Giudicepietro, Sandro Gonzi, Giovanni Macedonio, Vincenzo Masone, Massimo Orazi, Andrea Paccagnella, Rosario Peluso, Anna Pla Dalmau, Amrutha Samalan , et al. (5 additional authors not shown)

Abstract: The MUon RAdiography of VESuvius (MURAVES) project aims to use muography imaging techniques to study the internal structure of the summit of the Mt. Vesuvius, an active volcano near Naples, Italy. This paper presents recent advancements in both data analysis and simulation tools that enhance the quality and reliability of the experiments results. A new track selection method, termed the Golden Sel… ▽ More The MUon RAdiography of VESuvius (MURAVES) project aims to use muography imaging techniques to study the internal structure of the summit of the Mt. Vesuvius, an active volcano near Naples, Italy. This paper presents recent advancements in both data analysis and simulation tools that enhance the quality and reliability of the experiments results. A new track selection method, termed the Golden Selection, has been introduced to select high quality muon tracks by applying a refined Chi2 based criterion. This selection improves the signal to background ratio and enhances the resolution of muographic images. Additionally, the simulation framework has been upgraded with the integration of the MULDER (MUon simuLation for DEnsity Reconstruction) library, which unifies the functionalities of pervious used libraries within a single platform. MULDER enables efficient and accurate modeling of muon flux variations due to topographical features. An agreement is shown between simulated and experimental flux map. △ Less

Submitted 20 May, 2025; originally announced May 2025.

t-channel dark matter at the LHC

Authors: Chiara Arina, Benjamin Fuks, Luca Panizzi, Michael J. Baker, Alan S. Cornell, Jan Heisig, Benedikt Maier, Rute Pedro, Dominique Trischuk, Diyar Agin, Alexandre Arbey, Giorgio Arcadi, Emanuele Bagnaschi, Kehang Bai, Disha Bhatia, Mathias Becker, Alexander Belyaev, Ferdinand Benoit, Monika Blanke, Jackson Burzynski, Jonathan M. Butterworth, Antimo Cagnotta, Lorenzo Calibbi, Linda M. Carpenter, Xabier Cid Vidal , et al. (45 additional authors not shown)

Abstract: This report, summarising work achieved in the context of the LHC Dark Matter Working Group, investigates the phenomenology of $t$-channel dark matter models, spanning minimal setups with a single dark matter candidate and mediator to more complex constructions closer to UV-complete models. For each considered class of models, we examine collider, cosmological and astrophysical implications. In add… ▽ More This report, summarising work achieved in the context of the LHC Dark Matter Working Group, investigates the phenomenology of $t$-channel dark matter models, spanning minimal setups with a single dark matter candidate and mediator to more complex constructions closer to UV-complete models. For each considered class of models, we examine collider, cosmological and astrophysical implications. In addition, we explore scenarios with either promptly decaying or long-lived particles, as well as featuring diverse dark matter production mechanisms in the early universe. By providing a unified analysis framework, numerical tools and guidelines, this work aims to support future experimental and theoretical efforts in exploring $t$-channel dark matter models at colliders and in cosmology. △ Less

Submitted 14 April, 2025; originally announced April 2025.

Comments: 101 pages, 55 figures; report of the LHC Dark Matter Working Group on t-channel dark matter models

Report number: CERN-LPCC-2025-001, IRMP-CP3-25-07, TTK-25-07

CMS RPC Non-Physics Event Data Automation Ideology

Authors: A. Dimitrov, M. Tytgat, K. Mota Amarilo, A. Samalan, K. Skovpen, G. A. Alves, E. Alves Coelho, F. Marujo da Silva, M. Barroso Ferreira Filho, E. M. Da Costa, D. De Jesus Damiao, S. Fonseca De Souza, R. Gomes De Souza, L. Mundim, H. Nogima, J. P. Pinheiro, A. Santoro, M. Thiel, A. Aleksandrov, R. Hadjiiska, P. Iaydjiev, M. Shopova, G. Sultanov, L. Litov, B. Pavlov , et al. (79 additional authors not shown)

Abstract: This paper presents a streamlined framework for real-time processing and analysis of condition data from the CMS experiment Resistive Plate Chambers (RPC). Leveraging data streaming, it uncovers correlations between RPC performance metrics, like currents and rates, and LHC luminosity or environmental conditions. The Java-based framework automates data handling and predictive modeling, integrating… ▽ More This paper presents a streamlined framework for real-time processing and analysis of condition data from the CMS experiment Resistive Plate Chambers (RPC). Leveraging data streaming, it uncovers correlations between RPC performance metrics, like currents and rates, and LHC luminosity or environmental conditions. The Java-based framework automates data handling and predictive modeling, integrating extensive datasets into synchronized, query-optimized tables. By segmenting LHC operations and analyzing larger virtual detector objects, the automation enhances monitoring precision, accelerates visualization, and provides predictive insights, revolutionizing RPC performance evaluation and future behavior modeling. △ Less

Submitted 11 April, 2025; originally announced April 2025.

Comments: CMS RPC Condition Data Automation, Java framework, 12 pages, 23 figures, CMS Condition database

The Linear Collider Facility (LCF) at CERN

Authors: H. Abramowicz, E. Adli, F. Alharthi, M. Almanza-Soto, M. M. Altakach, S. Ampudia Castelazo, D. Angal-Kalinin, J. A. Anguiano, R. B. Appleby, O. Apsimon, A. Arbey, O. Arquero, D. Attié, J. L. Avila-Jimenez, H. Baer, Y. Bai, C. Balazs, P. Bambade, T. Barklow, J. Baudot, P. Bechtle, T. Behnke, A. B. Bellerive, S. Belomestnykh, Y. Benhammou , et al. (386 additional authors not shown)

Abstract: In this paper we outline a proposal for a Linear Collider Facility as the next flagship project for CERN. It offers the opportunity for a timely, cost-effective and staged construction of a new collider that will be able to comprehensively map the Higgs boson's properties, including the Higgs field potential, thanks to a large span in centre-of-mass energies and polarised beams. A comprehensive pr… ▽ More In this paper we outline a proposal for a Linear Collider Facility as the next flagship project for CERN. It offers the opportunity for a timely, cost-effective and staged construction of a new collider that will be able to comprehensively map the Higgs boson's properties, including the Higgs field potential, thanks to a large span in centre-of-mass energies and polarised beams. A comprehensive programme to study the Higgs boson and its closest relatives with high precision requires data at centre-of-mass energies from the Z pole to at least 1 TeV. It should include measurements of the Higgs boson in both major production mechanisms, ee -> ZH and ee -> vvH, precision measurements of gauge boson interactions as well as of the W boson, Higgs boson and top-quark masses, measurement of the top-quark Yukawa coupling through ee ->ttH, measurement of the Higgs boson self-coupling through HH production, and precision measurements of the electroweak couplings of the top quark. In addition, ee collisions offer discovery potential for new particles complementary to HL-LHC. △ Less

Submitted 19 June, 2025; v1 submitted 31 March, 2025; originally announced March 2025.

Comments: Submission to the ESPPU, as updated version May 26

Report number: DESY-25-054

A Linear Collider Vision for the Future of Particle Physics

Authors: H. Abramowicz, E. Adli, F. Alharthi, M. Almanza-Soto, M. M. Altakach, S Ampudia Castelazo, D. Angal-Kalinin, R. B. Appleby, O. Apsimon, A. Arbey, O. Arquero, A. Aryshev, S. Asai, D. Attié, J. L. Avila-Jimenez, H. Baer, J. A. Bagger, Y. Bai, I. R. Bailey, C. Balazs, T Barklow, J. Baudot, P. Bechtle, T. Behnke, A. B. Bellerive , et al. (391 additional authors not shown)

Abstract: In this paper we review the physics opportunities at linear $e^+e^-$ colliders with a special focus on high centre-of-mass energies and beam polarisation, take a fresh look at the various accelerator technologies available or under development and, for the first time, discuss how a facility first equipped with a technology mature today could be upgraded with technologies of tomorrow to reach much… ▽ More In this paper we review the physics opportunities at linear $e^+e^-$ colliders with a special focus on high centre-of-mass energies and beam polarisation, take a fresh look at the various accelerator technologies available or under development and, for the first time, discuss how a facility first equipped with a technology mature today could be upgraded with technologies of tomorrow to reach much higher energies and/or luminosities. In addition, we will discuss detectors and alternative collider modes, as well as opportunities for beyond-collider experiments and R\&D facilities as part of a linear collider facility (LCF). The material of this paper will support all plans for $e^+e^-$ linear colliders and additional opportunities they offer, independently of technology choice or proposed site, as well as R\&D for advanced accelerator technologies. This joint perspective on the physics goals, early technologies and upgrade strategies has been developed by the LCVision team based on an initial discussion at LCWS2024 in Tokyo and a follow-up at the LCVision Community Event at CERN in January 2025. It heavily builds on decades of achievements of the global linear collider community, in particular in the context of CLIC and ILC. △ Less

Submitted 31 March, 2025; v1 submitted 25 March, 2025; originally announced March 2025.

Comments: Community document for EPPSU, will be updated several times

On new physics off the Z peak in $H \rightarrow \ell^+\ell^- γ$

Authors: Aliaksei Kachanovich, Jean Kimus, Steven Lowette, Michel H. G. Tytgat

Abstract: Motivated by a small but intriguing excess observed in the decay mode $ H\rightarrow \ell^+\ell^- γ$ reported by both the ATLAS and CMS collaborations, we explore the possibility that new physics contributes directly to the effective $ H \ell \overline{\ell} γ$ coupling rather than modifying the $ Z $ peak. Concretely, we consider a dimension-8 operator that could arise from new particles via box… ▽ More Motivated by a small but intriguing excess observed in the decay mode $ H\rightarrow \ell^+\ell^- γ$ reported by both the ATLAS and CMS collaborations, we explore the possibility that new physics contributes directly to the effective $ H \ell \overline{\ell} γ$ coupling rather than modifying the $ Z $ peak. Concretely, we consider a dimension-8 operator that could arise from new particles via box diagrams. Such non-resonant contribution may provide an alternative origin for current or future excesses. We examine how experimental cuts may distinguish between possible modifications of the $ Z $ peak and non-resonant contributions. The currently measured excess requires that the new physics scale is relatively low $( Λ_R \sim v $). However, we show that it may remain within current experimental bounds. In particular, we illustrate this using a simplified model, motivated by the dark matter problem, and discuss its other experimental constraints. △ Less

Submitted 7 April, 2025; v1 submitted 11 March, 2025; originally announced March 2025.

Comments: 22 pages, 9 figures, 3 tables. New subsection added on constraints from the muon anomalous magnetic dipole moment

Report number: ULB-TH/24-12

The T-SDHCAL Hadronic Calorimeter for a Future Higgs factory

Authors: M. Tytgat, C. Combaret, C. Devanne, G. Garillot, G. Grenier, I. Laktineh, L. Mirabito, T. Pasquier, M. C. Fouz, H. J. Yang, W. Wu, Y. Tan, Y. Baek, D. Kim, J. Kim

Abstract: The CALICE technological RPC-based SDHCAL prototype that fullfils all the requirements of compactness, hermeticity and power budget of the future lepton accelerator experiments, has been extensively tested and has provided excellent results in terms of the energy resolution and shower separation. A new phase of R&D to validate completely the SDHCAL option for the International Linear Detector (ILD… ▽ More The CALICE technological RPC-based SDHCAL prototype that fullfils all the requirements of compactness, hermeticity and power budget of the future lepton accelerator experiments, has been extensively tested and has provided excellent results in terms of the energy resolution and shower separation. A new phase of R&D to validate completely the SDHCAL option for the International Linear Detector (ILD) project of the ILC and also the Circular Electron Positron Collider (CEPC and FCCee) has started with the conception and the realization of new prototypes. The new prototype proposes to exploit the excellent time resolution that can be provided by multi-gap resistive plate chamber detectors in order to better build the hadronic showers with the aim to separate close-by ones and also to single out the contribution of delayed neutrons with the purpose to improve on the Particle Flow Algorithm performances and better reconstruct the showers energy. A new technique to build multi-gap resistive plate chambers has been developed and first results confirm the excellent efficiency of the new detectors. The timing performance is under study using the PETIROC ASIC developed by the OMEGA group. The progress realized on the different aspects of the new concept will be presented and the future steps will be discussed. △ Less

Submitted 5 February, 2025; originally announced February 2025.

Comments: 13 pages, 6 figures, Proceedings of the XVII Conference on Resistive Plate Chambers and Related Detectors, 9-13 Sept. 2024, Santiago de Compostela, Spain

In-beam performance of a Resistive Plate Chamber operated with eco-friendly gas mixtures

Authors: L. Quaglia, M. Abbrescia, G. Aielli, R. Aly, M. C. Arena, M. Barroso, L. Benussi, S. Bianco, D. Boscherini, F. Bordon, A. Bruni, S. Buontempo, M. Busato, P. Camarri, R. Cardarelli, L. Congedo, D. De Jesus Damiao, M. De Serio, A. Di Ciaccio, L. Di Stante, P. Dupieux, J. Eysermans, A. Ferretti, G. Galati, M. Gagliardi , et al. (32 additional authors not shown)

Abstract: ALICE (A Large Ion Collider Experiment) studies the Quark-Gluon Plasma (QGP): a deconfined state of matter obtained in ultra-relativistic heavy-ion collisions. One of the probes for QGP study are quarkonia and open heavy flavour, of which ALICE exploits the muonic decay. A set of Resistive Plate Chambers (RPCs), placed in the forward rapidity region of the ALICE detector, is used for muon identifi… ▽ More ALICE (A Large Ion Collider Experiment) studies the Quark-Gluon Plasma (QGP): a deconfined state of matter obtained in ultra-relativistic heavy-ion collisions. One of the probes for QGP study are quarkonia and open heavy flavour, of which ALICE exploits the muonic decay. A set of Resistive Plate Chambers (RPCs), placed in the forward rapidity region of the ALICE detector, is used for muon identification purposes. The correct operation of these detectors is ensured by the choice of the proper gas mixture. Currently they are operated with a mixture of C$_{2}$H$_{2}$F$_{4}$, i-C$_{4}$H$_{10}$ and SF$_{6}$ but, starting from 2017, new EU regulations have enforced a progressive phase-out of C$_{2}$H$_{2}$F$_{4}$ because of its large Global Warming Potential (GWP), making it difficult and costly to purchase. CERN asked LHC experiments to reduce greenhouse gases emissions, to which RPC operation contributes significantly. A possible candidate for C$_{2}$H$_{2}$F$_{4}$ replacement is the C$_{3}$H$_{2}$F$_{4}$ (diluted with other gases, such as CO$_{2}$), which has been extensively tested using cosmic rays. Promising gas mixtures have been devised; the next crucial steps are the detailed in-beam characterization of such mixtures as well as the study of their performance under increasing irradiation levels. This contribution will describe the methodology and results of beam tests carried out at the CERN GIF++ (equipped with a high activity $^{137}$Cs source and muon beam) with an ALICE-like RPC prototype, operated with several mixtures with varying proportions of CO$_{2}$, C$_{3}$H$_{2}$F$_{4}$, i-C$_{4}$H$_{10}$ and SF$_{6}$ . Absorbed currents, efficiencies, prompt charges, cluster sizes, time resolutions and rate capabilities will be presented, both from digitized (for detailed shape and charge analysis) and discriminated (using the same front-end electronics as employed in ALICE) signals. △ Less

Submitted 29 February, 2024; originally announced February 2024.

Exploring Eco-Friendly Gas Mixtures for Resistive Plate Chambers: A Comprehensive Study on Performance and Aging

Authors: The RPC ECOGas@GIF++ collaboration, :, L. Quaglia, M. Abbrescia, G. Aielli, R. Aly, M. C. Arena, M. Barroso, L. Benussi, S. Bianco, D. Boscherini, F. Bordon, A. Bruni, S. Buontempo, M. Busato, P. Camarri, R. Cardarelli, L. Congedo, D. De Jesus Damiao, M. De Serio, A. Di Ciaccio, L. Di Stante, P. Dupieux, J. Eysermans, A. Ferretti , et al. (35 additional authors not shown)

Abstract: Resistive Plate Chambers (RPCs) are gaseous detectors widely used in high energy physics experiments, operating with a gas mixture primarily containing Tetrafluoroethane (C$_{2}$H$_{2}$F$_{4}$), commonly known as R-134a, which has a global warming potential (GWP) of 1430. To comply with European regulations and explore environmentally friendly alternatives, the RPC EcoGas@GIF++ collaboration, invo… ▽ More Resistive Plate Chambers (RPCs) are gaseous detectors widely used in high energy physics experiments, operating with a gas mixture primarily containing Tetrafluoroethane (C$_{2}$H$_{2}$F$_{4}$), commonly known as R-134a, which has a global warming potential (GWP) of 1430. To comply with European regulations and explore environmentally friendly alternatives, the RPC EcoGas@GIF++ collaboration, involving ALICE, ATLAS, CMS, LHCb/SHiP, and EP-DT communities, has undertaken intensive R\&D efforts to explore new gas mixtures for RPC technology. A leading alternative under investigation is HFO1234ze, boasting a low GWP of 6 and demonstrating reasonable performance compared to R-134a. Over the past few years, RPC detectors with slightly different characteristics and electronics have been studied using HFO and CO$_{2}$-based gas mixtures at the CERN Gamma Irradiation Facility. An aging test campaign was launched in August 2022, and during the latest test beam in July 2023, all detector systems underwent evaluation. This contribution will report the results of the aging studies and the performance evaluations of the detectors with and without irradiation. △ Less

Submitted 29 February, 2024; originally announced February 2024.

Performance testing of gas-tight portable RPC for muography applications

Authors: V. Kumar, S. Basnet, E. Cortina Gil, P. Demin, R. M. I. D. Gamage, A. Giammanco, R. Karnam, M. Moussawi, A. Samalan, M. Tytgat, A. Youssef

Abstract: This paper reports the latest developmental efforts for a position-sensitive glass-based Resistive Plate Chamber (RPC) and a multi-channel Data AcQuisition (DAQ) system tailored for muon tracking in muography applications. The designed setup prioritizes portability, aiming for field applications where both the detector and the DAQ operate effectively in external environmental conditions. Comprehen… ▽ More This paper reports the latest developmental efforts for a position-sensitive glass-based Resistive Plate Chamber (RPC) and a multi-channel Data AcQuisition (DAQ) system tailored for muon tracking in muography applications. The designed setup prioritizes portability, aiming for field applications where both the detector and the DAQ operate effectively in external environmental conditions. Comprehensive discussions on hardware development activities and signal processing techniques are included, incorporating noise filtering to enhance the accurate detection of real muons. A muon absorption measurement has also been carried out to understand the behavior of these detectors from an application perspective. △ Less

Submitted 23 February, 2024; v1 submitted 12 December, 2023; originally announced December 2023.

Comments: 11 pages, 8 figures, conference

Preliminary results on the long term operation of RPCs with eco-friendly gas mixtures under irradiation at the CERN Gamma Irradiation Facility

Authors: L. Quaglia, D. Ramos, M. Abbrescia, G. Aielli, R. Aly, M. C. Arena, M. Barroso, L. Benussi, S. Bianco, D. Boscherini, F. Bordon, A. Bruni, S. Buontempo, M. Busato, P. Camarri, R. Cardarelli, L. Congedo, D. De Jesus Damiao, M. De Serio, A. Di Ciacco, L. Di Stante, P. Dupieux, J. Eysermans, A. Ferretti, G. Galati , et al. (33 additional authors not shown)

Abstract: Since 2019 a collaboration between researchers from various institutes and experiments (i.e. ATLAS, CMS, ALICE, LHCb/SHiP and the CERN EP-DT group), has been operating several RPCs with diverse electronics, gas gap thicknesses and detector layouts at the CERN Gamma Irradiation Facility (GIF++). The studies aim at assessing the performance of RPCs when filled with new eco-friendly gas mixtures in a… ▽ More Since 2019 a collaboration between researchers from various institutes and experiments (i.e. ATLAS, CMS, ALICE, LHCb/SHiP and the CERN EP-DT group), has been operating several RPCs with diverse electronics, gas gap thicknesses and detector layouts at the CERN Gamma Irradiation Facility (GIF++). The studies aim at assessing the performance of RPCs when filled with new eco-friendly gas mixtures in avalanche mode and in view of evaluating possible ageing effects after long high background irradiation periods, e.g. High-Luminosity LHC phase. This challenging research is also part of a task of the European AidaInnova project. A promising eco-friendly gas identified for RPC operation is the tetrafluoruropropene (C$_{3}$H$_{2}$F$_{4}$, commercially known as HFO-1234ze) that has been studied at the CERN GIF++ in combination with different percentages of CO$_2$. Between the end of 2021 and 2022 several beam tests have been carried out to establish the performance of RPCs operated with such mixtures before starting the irradiation campaign for the ageing study. Results of these tests for different RPCs layouts and different gas mixtures, under increasing background rates are presented here, together with the preliminary outcome of the detector ageing tests. △ Less

Submitted 28 December, 2024; v1 submitted 29 November, 2023; originally announced November 2023.

Simulation tools, first results and experimental status of the MURAVES experiment

Authors: Andrea Giammanco, Yanwen Hong, Marwa Al Moussawi, Fabio Ambrosino, Antonio Anastasio, Samip Basnet, Lorenzo Bonechi, Massimo Bongi, Diletta Borselli, Alan Bross, Antonio Caputo, Roberto Ciaranfi, Luigi Cimmino, Vitaliano Ciulli, Raffaello D'Alessandro, Mariaelena D'Errico, Catalin Frosin, Flora Giudicepietro, Sandro Gonzi, Giovanni Macedonio, Vincenzo Masone, Massimo Orazi, Andrea Paccagnella, Rosario Peluso, Anna Pla-Dalmau , et al. (7 additional authors not shown)

Abstract: The MUon RAdiography of VESuvius (MURAVES) project aims at the study of Mt. Vesuvius, an active and hazardous volcano near Naples, Italy, with the use of muons freely and abundantly produced by cosmic rays. In particular, the MURAVES experiment intends to perform muographic imaging of the internal structure of the summit of Mt. Vesuvius. The challenging measurement of the rock density distribution… ▽ More The MUon RAdiography of VESuvius (MURAVES) project aims at the study of Mt. Vesuvius, an active and hazardous volcano near Naples, Italy, with the use of muons freely and abundantly produced by cosmic rays. In particular, the MURAVES experiment intends to perform muographic imaging of the internal structure of the summit of Mt. Vesuvius. The challenging measurement of the rock density distribution in its summit by muography, in conjunction with data from other geophysical techniques, can help model possible eruption dynamics. The MURAVES apparatus consists of an array of three independent and identical muon trackers, with a total sensitive area of 3 square meters. In each tracker, a sequence of 4 XY tracking planes made of plastic scintillators is complemented by a 60 cm thick lead wall inserted between the two downstream planes to improve rejection of background from low energy muons. The apparatus is currently acquiring data. This paper presents preliminary results from the analysis of the first data samples acquired with trackers pointing towards Mt. Vesuvius, including the first relative measurement of the density projection of two flanks of the volcano at three different altitudes; we also present the workflow of the simulation chain of the MURAVES experiment and its ongoing developments. △ Less

Submitted 19 June, 2024; v1 submitted 22 November, 2023; originally announced November 2023.

Small-area Portable Resistive Plate Chambers for Muography

Authors: Amrutha Samalan, Samip Basnet, Eduardo Cortina Gil, Pavel Demin, Ishan Darshana Ran Muthugalalage, Andrea Giammanco, Raveendrababu Karnam, Vishal Kumar, Marwa Al Moussawi, Michael Tytgat, Ayman Youssef

Abstract: Muography is finding applications in various domains such as volcanology, archaeology, civil engineering, industry, mining, and nuclear waste surveys. To simplify transportation and installation in remote locations after laboratory testing, a fully portable and autonomous muon telescope based on Resistive Plate Chambers (RPCs) is being developed. Two glass-RPC prototypes have been created, sharing… ▽ More Muography is finding applications in various domains such as volcanology, archaeology, civil engineering, industry, mining, and nuclear waste surveys. To simplify transportation and installation in remote locations after laboratory testing, a fully portable and autonomous muon telescope based on Resistive Plate Chambers (RPCs) is being developed. Two glass-RPC prototypes have been created, sharing the same design goals but with different detector parameters, and comparative studies are ongoing. Drawing from prototype experience, a double-gap RPC with advanced features and improved spatial resolution is constructed. Resistive electrodes are produced manually, and a new data acquisition board is currently undergoing calibration. The results on prototype performance, readout board comparisons and the technical progress on the double-gap RPC are presented. △ Less

Submitted 19 November, 2023; originally announced November 2023.

High-rate tests on Resistive Plate Chambers operated with eco-friendly gas mixtures

Authors: M. Abbrescia, G. Aielli, R. Aly, M. C. Arena, M. Barroso, L. Benussi, S. Bianco, F. Bordon, D. Boscherini, A. Bruni, S. Buontempo, M. Busato, P. Camarri, R. Cardarelli, L. Congedo, D. De Jesus Damiao, M. De Serio, A. Di Ciaccio, L. Di Stante, P. Dupieux, J. Eysermans, A. Ferretti, G. Galati, M. Gagliardi, R. Guida , et al. (30 additional authors not shown)

Abstract: Results obtained by the RPC ECOgas@GIF++ Collaboration, using Resistive Plate Chambers operated with new, eco-friendly gas mixtures, based on Tetrafluoropropene and carbon dioxide, are shown and discussed in this paper. Tests aimed to assess the performance of this kind of detectors in high-irradiation conditions, analogous to the ones foreseen for the coming years at the Large Hadron Collider exp… ▽ More Results obtained by the RPC ECOgas@GIF++ Collaboration, using Resistive Plate Chambers operated with new, eco-friendly gas mixtures, based on Tetrafluoropropene and carbon dioxide, are shown and discussed in this paper. Tests aimed to assess the performance of this kind of detectors in high-irradiation conditions, analogous to the ones foreseen for the coming years at the Large Hadron Collider experiments, were performed, and demonstrate a performance basically similar to the one obtained with the gas mixtures currently in use, based on Tetrafluoroethane, which is being progressively phased out for its possible contribution to the greenhouse effect. Long term aging tests are also being carried out, with the goal to demonstrate the possibility of using these eco-friendly gas mixtures during the whole High Luminosity phase of the Large Hadron Collider. △ Less

Submitted 14 November, 2023; originally announced November 2023.

Comments: Submitted to European Physical Journal C on October 24, 2023, 15 pages, 14 figures

Machine Learning based tool for CMS RPC currents quality monitoring

Authors: E. Shumka, A. Samalan, M. Tytgat, M. El Sawy, G. A. Alves, F. Marujo, E. A. Coelho, E. M. Da Costa, H. Nogima, A. Santoro, S. Fonseca De Souza, D. De Jesus Damiao, M. Thiel, K. Mota Amarilo, M. Barroso Ferreira Filho, A. Aleksandrov, R. Hadjiiska, P. Iaydjiev, M. Rodozov, M. Shopova, G. Soultanov, A. Dimitrov, L. Litov, B. Pavlov, P. Petkov , et al. (83 additional authors not shown)

Abstract: The muon system of the CERN Compact Muon Solenoid (CMS) experiment includes more than a thousand Resistive Plate Chambers (RPC). They are gaseous detectors operated in the hostile environment of the CMS underground cavern on the Large Hadron Collider where pp luminosities of up to $2\times 10^{34}$ $\text{cm}^{-2}\text{s}^{-1}$ are routinely achieved. The CMS RPC system performance is constantly m… ▽ More The muon system of the CERN Compact Muon Solenoid (CMS) experiment includes more than a thousand Resistive Plate Chambers (RPC). They are gaseous detectors operated in the hostile environment of the CMS underground cavern on the Large Hadron Collider where pp luminosities of up to $2\times 10^{34}$ $\text{cm}^{-2}\text{s}^{-1}$ are routinely achieved. The CMS RPC system performance is constantly monitored and the detector is regularly maintained to ensure stable operation. The main monitorable characteristics are dark current, efficiency for muon detection, noise rate etc. Herein we describe an automated tool for CMS RPC current monitoring which uses Machine Learning techniques. We further elaborate on the dedicated generalized linear model proposed already and add autoencoder models for self-consistent predictions as well as hybrid models to allow for RPC current predictions in a distant future. △ Less

Submitted 6 February, 2023; originally announced February 2023.

Searching for an eco-friendly gas mixture for the ALICE Resistive Plate Chambers

Authors: Luca Quaglia, R. Cardarelli, B. Liberti, E. Pastori, G. Proto, G. Aielli, P. Camarri, A. Di Ciacco, L. Di Stante, R. Santonico, G. Alberghi, D. Boscherini, A. Bruni, L. Massa, A. Polini, M. Romano, L. Benussi, S. Bianco, L. Passamonti, D. Piccolo, D. Pierluigi, A. Russo M. Ferrini, G. Saviano, M. Abbrescia, L. Congedo , et al. (25 additional authors not shown)

Abstract: The ALICE RPCs are operated with a mixture of 89.7% $C_{2}H_{2}F_{4}$, 10% i-$C_{4}H_{10}$ and 0.3% $SF_{6}$. $C_{2}H_{2}F_{4}$ and $SF_{6}$ are fluorinated greenhouse gases with a high Global Warming Potential (GWP). New European Union regulations have imposed a progressive phase-down of the production and usage of F-gases, aiming to cut down their emission by two thirds in 2030 with respect to 2… ▽ More The ALICE RPCs are operated with a mixture of 89.7% $C_{2}H_{2}F_{4}$, 10% i-$C_{4}H_{10}$ and 0.3% $SF_{6}$. $C_{2}H_{2}F_{4}$ and $SF_{6}$ are fluorinated greenhouse gases with a high Global Warming Potential (GWP). New European Union regulations have imposed a progressive phase-down of the production and usage of F-gases, aiming to cut down their emission by two thirds in 2030 with respect to 2014. Even though research activities are excluded from these regulations, the phase-down will inevitably increase their price and CERN is also aiming to cut down on its emissions. For these reasons it is crucial to find a more eco-friendly gas mixture for RPCs by the time of the LHC long shutdown 3, foreseen in 2026. Since $C_{2}H_{2}F_{4}$ is the main contributor to the mixture GWP, an extensive R&D process has started to replace it with tetrafluoropropene ($C_{3}H_{2}F_{4}$), due to its chemical similarity with $C_{2}H_{2}F_{4}$ and its low GWP (around 7). Preliminary tests with cosmic rays have shown promising results in terms of detector performance. The next step is to study the long-term behavior of RPCs operated with these new gas mixtures (aging studies). Since this is a subject of interest for all (and not only) the LHC experiments, a collaboration, ECOgas@GIF++, was setup to carry out joint studies. Among others, a small ALICE-like RPC was installed at the Gamma Irradiation Facility at CERN, where they are exposed to a strong radiation field, coming from a 12.5 TBq $^{137}$Cs source, which allows one to simulate many years of operation in a relatively short time. The facility also provides a muon beam at specific times of the year, which can be used to study the detector performance (e.g. efficiency and cluster size) during and after irradiation. △ Less

Submitted 5 September, 2022; originally announced September 2022.

Comments: Proceedings of the LHCp 2022 conference

Quality Control of Mass-Produced GEM Detectors for the CMS GE1/1 Muon Upgrade

Authors: M. Abbas, M. Abbrescia, H. Abdalla, A. Abdelalim, S. AbuZeid, A. Agapitos, A. Ahmad, A. Ahmed, W. Ahmed, C. Aimè, C. Aruta, I. Asghar, P. Aspell, C. Avila, J. Babbar, Y. Ban, R. Band, S. Bansal, L. Benussi, T. Beyrouthy, V. Bhatnagar, M. Bianco, S. Bianco, K. Black, L. Borgonovi , et al. (157 additional authors not shown)

Abstract: The series of upgrades to the Large Hadron Collider, culminating in the High Luminosity Large Hadron Collider, will enable a significant expansion of the physics program of the CMS experiment. However, the accelerator upgrades will also make the experimental conditions more challenging, with implications for detector operations, triggering, and data analysis. The luminosity of the proton-proton co… ▽ More The series of upgrades to the Large Hadron Collider, culminating in the High Luminosity Large Hadron Collider, will enable a significant expansion of the physics program of the CMS experiment. However, the accelerator upgrades will also make the experimental conditions more challenging, with implications for detector operations, triggering, and data analysis. The luminosity of the proton-proton collisions is expected to exceed $2-3\times10^{34}$~cm$^{-2}$s$^{-1}$ for Run 3 (starting in 2022), and it will be at least $5\times10^{34}$~cm$^{-2}$s$^{-1}$ when the High Luminosity Large Hadron Collider is completed for Run 4. These conditions will affect muon triggering, identification, and measurement, which are critical capabilities of the experiment. To address these challenges, additional muon detectors are being installed in the CMS endcaps, based on Gas Electron Multiplier technology. For this purpose, 161 large triple-Gas Electron Multiplier detectors have been constructed and tested. Installation of these devices began in 2019 with the GE1/1 station and will be followed by two additional stations, GE2/1 and ME0, to be installed in 2023 and 2026, respectively. The assembly and quality control of the GE1/1 detectors were distributed across several production sites around the world. We motivate and discuss the quality control procedures that were developed to standardize the performance of the detectors, and we present the final results of the production. Out of 161 detectors produced, 156 detectors passed all tests, and 144 detectors are now installed in the CMS experiment. The various visual inspections, gas tightness tests, intrinsic noise rate characterizations, and effective gas gain and response uniformity tests allowed the project to achieve this high success rate. △ Less

Submitted 22 March, 2022; originally announced March 2022.

Comments: 45 pages, 39 figures, submitted to Nuclear Instruments and Methods in Physics Research Section A

Simulation Studies of a Novel Muography Detector for the Great Pyramids

Authors: S. Aly, Y. Assran, A. Bonneville, B. ElMahdy, R. T. Kouzes, A. Lintereur, A. Mahrous, I. Mostafanezhad, R. Pang, B. Rotter, F. Snigdha, M. Tytgat, M. N. Yaseen

Abstract: Muography is an imaging technique that can be used to examine the interior structure of large-size objects. The technique is based on measurements of the absorption of cosmic-ray muons passing through the object under study. Muographic imaging was already successfully applied to the discovery of a new void inside the Great Pyramid of Khufu at Giza, Egypt. With the aim of studying the Pyramid of Kh… ▽ More Muography is an imaging technique that can be used to examine the interior structure of large-size objects. The technique is based on measurements of the absorption of cosmic-ray muons passing through the object under study. Muographic imaging was already successfully applied to the discovery of a new void inside the Great Pyramid of Khufu at Giza, Egypt. With the aim of studying the Pyramid of Khafre, the second largest pyramid at Giza, a new muography detector is currently being constructed. In this paper we report on the development of a corresponding new simulation framework of the Great Pyramids and the detector setup. This simulation will serve as a basis to develop the data and image reconstruction algorithms to be used during our future muography campaign in the Pyramid of Khafre, and will allow us to study the relevant experimental conditions at the site. △ Less

Submitted 16 February, 2022; v1 submitted 15 February, 2022; originally announced February 2022.

Comments: 4 pages, 5 figures, Muography2021 workshop(Ghent university-Belgium)

Upgrade of the CMS Resistive Plate Chambers for the High Luminosity LHC

Authors: A. Samalan, M. Tytgat, G. A. Alves, F. Marujo, F. Torres Da Silva De Araujo, E. M. DaCosta, D. De Jesus Damiao, H. Nogima, A. Santoro, S. Fonseca De Souza, A. Aleksandrov, R. Hadjiiska, P. Iaydjiev, M. Rodozov, M. Shopova, G. Soultanov, M. Bonchev, A. Dimitrov, L. Litov, B. Pavlov, P. Petkov, A. Petrov, S. J. Qian, C. Bernal, A. Cabrera , et al. (86 additional authors not shown)

Abstract: During the upcoming High Luminosity phase of the Large Hadron Collider (HL-LHC), the integrated luminosity of the accelerator will increase to 3000 fb$^{-1}$. The expected experimental conditions in that period in terms of background rates, event pileup, and the probable aging of the current detectors present a challenge for all the existing experiments at the LHC, including the Compact Muon Solen… ▽ More During the upcoming High Luminosity phase of the Large Hadron Collider (HL-LHC), the integrated luminosity of the accelerator will increase to 3000 fb$^{-1}$. The expected experimental conditions in that period in terms of background rates, event pileup, and the probable aging of the current detectors present a challenge for all the existing experiments at the LHC, including the Compact Muon Solenoid (CMS) experiment. To ensure a highly performing muon system for this period, several upgrades of the Resistive Plate Chamber (RPC) system of the CMS are currently being implemented. These include the replacement of the readout system for the present system, and the installation of two new RPC stations with improved chamber and front-end electronics designs. The current overall status of this CMS RPC upgrade project is presented. △ Less

Submitted 2 November, 2021; v1 submitted 29 September, 2021; originally announced September 2021.

End-to-end simulations of the MUon RAdiography of VESuvius experiment

Authors: A. Samalan, S. Basnet, L. Bonechi, L. Cimmino, R. D. Alessandro, M. D. Errico, A. Giammanco, R. Karnam, G. Macedonio, M. Moussawi, C. Rendon, G. Saracino, M. Tytgat

Abstract: The MUon RAdiography of VESuvius (MURAVES) project aims at the study of the summital cone of Mt. Vesuvius, an active volcano near Naples (Italy), by measuring its density profile through muon flux attenuation. Its data, combined with those from gravimetric and seismic measurement campaigns, will be used for better defining the volcanic plug at the bottom of the crater. We report on the development… ▽ More The MUon RAdiography of VESuvius (MURAVES) project aims at the study of the summital cone of Mt. Vesuvius, an active volcano near Naples (Italy), by measuring its density profile through muon flux attenuation. Its data, combined with those from gravimetric and seismic measurement campaigns, will be used for better defining the volcanic plug at the bottom of the crater. We report on the development of an end-to-end simulation framework, in order to perform accurate investigations of the effects of the experimental constraints and to compare simulations, under various model hypotheses, with the actual observations. The detector simulation setup is developed using GEANT4 and a study of cosmic particle generators has been conducted to identify the most suitable one for our simulation framework. To mimic the real data, GEANT4 raw hits are converted to clusters through a simulated digitization: energy deposits are first summed per scintillator bar, and then converted to number of photoelectrons with a data-driven procedure. This is followed by the same clustering algorithm and same tracking code as in real data. We also report on the study of muon transport through rock using PUMAS and GEANT4. In this paper we elaborate on the rationale for our technical choices, including trade-off between speed and accuracy. The developments reported here are of general interest in muon radiography and can be applied in similar cases. △ Less

Submitted 17 November, 2021; v1 submitted 29 September, 2021; originally announced September 2021.

Performance of a Triple-GEM Demonstrator in $pp$ Collisions at the CMS Detector

Authors: M. Abbas, M. Abbrescia, H. Abdalla, A. Abdelalim, S. AbuZeid, A. Agapitos, A. Ahmad, A. Ahmed, W. Ahmed, C. Aimè, C. Aruta, I. Asghar, P. Aspell, C. Avila, J. Babbar, Y. Ban, R. Band, S. Bansal, L. Benussi, V. Bhatnagar, M. Bianco, S. Bianco, K. Black, L. Borgonovi, O. Bouhali , et al. (156 additional authors not shown)

Abstract: After the Phase-2 high-luminosity upgrade to the Large Hadron Collider (LHC), the collision rate and therefore the background rate will significantly increase, particularly in the high $η$ region. To improve both the tracking and triggering of muons, the Compact Muon Solenoid (CMS) Collaboration plans to install triple-layer Gas Electron Multiplier (GEM) detectors in the CMS muon endcaps. Demonstr… ▽ More After the Phase-2 high-luminosity upgrade to the Large Hadron Collider (LHC), the collision rate and therefore the background rate will significantly increase, particularly in the high $η$ region. To improve both the tracking and triggering of muons, the Compact Muon Solenoid (CMS) Collaboration plans to install triple-layer Gas Electron Multiplier (GEM) detectors in the CMS muon endcaps. Demonstrator GEM detectors were installed in CMS during 2017 to gain operational experience and perform a preliminary investigation of detector performance. We present the results of triple-GEM detector performance studies performed in situ during normal CMS and LHC operations in 2018. The distribution of cluster size and the efficiency to reconstruct high $p_T$ muons in proton--proton collisions are presented as well as the measurement of the environmental background rate to produce hits in the GEM detector. △ Less

Submitted 22 September, 2021; v1 submitted 20 July, 2021; originally announced July 2021.

Comments: 10 pages, 5 figures

Modeling the triple-GEM detector response to background particles for the CMS Experiment

Authors: M. Abbas, M. Abbrescia, H. Abdalla, A. Abdelalim, S. AbuZeid, A. Agapitos, A. Ahmad, A. Ahmed, W. Ahmed, C. Aimè, C. Aruta, I. Asghar, P. Aspell, C. Avila, I. Azhgirey, J. Babbar, Y. Ban, R. Band, S. Bansal, L. Benussi, V. Bhatnagar, M. Bianco, S. Bianco, K. Black, L. Borgonovi , et al. (164 additional authors not shown)

Abstract: An estimate of environmental background hit rate on triple-GEM chambers is performed using Monte Carlo (MC) simulation and compared to data taken by test chambers installed in the CMS experiment (GE1/1) during Run-2 at the Large Hadron Collider (LHC). The hit rate is measured using data collected with proton-proton collisions at 13 TeV and a luminosity of 1.5$\times10^{34}$ cm$^{-2}$ s$^{-1}$. The… ▽ More An estimate of environmental background hit rate on triple-GEM chambers is performed using Monte Carlo (MC) simulation and compared to data taken by test chambers installed in the CMS experiment (GE1/1) during Run-2 at the Large Hadron Collider (LHC). The hit rate is measured using data collected with proton-proton collisions at 13 TeV and a luminosity of 1.5$\times10^{34}$ cm$^{-2}$ s$^{-1}$. The simulation framework uses a combination of the FLUKA and Geant4 packages to obtain the hit rate. FLUKA provides the radiation environment around the GE1/1 chambers, which is comprised of the particle flux with momentum direction and energy spectra ranging from $10^{-11}$ to $10^{4}$ MeV for neutrons, $10^{-3}$ to $10^{4}$ MeV for $γ$'s, $10^{-2}$ to $10^{4}$ MeV for $e^{\pm}$, and $10^{-1}$ to $10^{4}$ MeV for charged hadrons. Geant4 provides an estimate of detector response (sensitivity) based on an accurate description of detector geometry, material composition and interaction of particles with the various detector layers. The MC simulated hit rate is estimated as a function of the perpendicular distance from the beam line and agrees with data within the assigned uncertainties of 10-14.5%. This simulation framework can be used to obtain a reliable estimate of background rates expected at the High Luminosity LHC. △ Less

Submitted 8 July, 2021; originally announced July 2021.

Comments: 16 pages, 9 figures, 6 tables

Interstrip Capacitances of the Readout Board used in Large Triple-GEM Detectors for the CMS Muon Upgrade

Authors: M. Abbas, M. Abbrescia, H. Abdalla, A. Abdelalim, S. AbuZeid, A. Agapitos, A. Ahmad, A. Ahmed, W. Ahmed, C. Aimè, C. Aruta, I. Asghar, P. Aspell, C. Avila, J. Babbar, Y. Ban, R. Band, S. Bansal, L. Benussi, V. Bhatnagar, M. Bianco, S. Bianco, K. Black, L. Borgonovi, O. Bouhali , et al. (156 additional authors not shown)

Abstract: We present analytical calculations, Finite Element Analysis modeling, and physical measurements of the interstrip capacitances for different potential strip geometries and dimensions of the readout boards for the GE2/1 triple-Gas Electron Multiplier detector in the CMS muon system upgrade. The main goal of the study is to find configurations that minimize the interstrip capacitances and consequent… ▽ More We present analytical calculations, Finite Element Analysis modeling, and physical measurements of the interstrip capacitances for different potential strip geometries and dimensions of the readout boards for the GE2/1 triple-Gas Electron Multiplier detector in the CMS muon system upgrade. The main goal of the study is to find configurations that minimize the interstrip capacitances and consequently maximize the signal-to-noise ratio for the detector. We find agreement at the 1.5--4.8% level between the two methods of calculations and on the average at the 17% level between calculations and measurements. A configuration with halved strip lengths and doubled strip widths results in a measured 27--29% reduction over the original configuration while leaving the total number of strips unchanged. We have now adopted this design modification for all eight module types of the GE2/1 detector and will produce the final detector with this new strip design. △ Less

Submitted 20 September, 2020; originally announced September 2020.

Comments: 22 pages, 14 figures

Journal ref: 2020 JINST 15 P12019

Azimuthal single- and double-spin asymmetries in semi-inclusive deep-inelastic lepton scattering by transversely polarized protons

Authors: HERMES Collaboration, A. Airapetian, N. Akopov, Z. Akopov, E. C. Aschenauer, W. Augustyniak, R. Avakian, A. Bacchetta, S. Belostotski, V. Bryzgalov, G. P. Capitani, E. Cisbani, G. Ciullo, M. Contalbrigo, W. Deconinck, R. De Leo, E. De Sanctis, M. Diefenthaler, P. Di Nezza, M. Düren, G. Elbakian, F. Ellinghaus, A. Fantoni, L. Felawka, G. Gavrilov , et al. (50 additional authors not shown)

Abstract: A comprehensive set of azimuthal single-spin and double-spin asymmetries in semi-inclusive leptoproduction of pions, charged kaons, protons, and antiprotons from transversely polarized protons is presented. These asymmetries include the previously published HERMES results on Collins and Sivers asymmetries, the analysis of which has been extended to include protons and antiprotons and also to an ex… ▽ More A comprehensive set of azimuthal single-spin and double-spin asymmetries in semi-inclusive leptoproduction of pions, charged kaons, protons, and antiprotons from transversely polarized protons is presented. These asymmetries include the previously published HERMES results on Collins and Sivers asymmetries, the analysis of which has been extended to include protons and antiprotons and also to an extraction in a three-dimensional kinematic binning and enlarged phase space. They are complemented by corresponding results for the remaining four single-spin and four double-spin asymmetries allowed in the one-photon-exchange approximation of the semi-inclusive deep-inelastic scattering process for target-polarization orientation perpendicular to the direction of the incoming lepton beam. Among those results, significant non-vanishing $\cos{φ-φ_S}$ modulations provide evidence for a sizable worm-gear (II) distribution, $g_{1T}$. Most of the other modulations are found to be consistent with zero with the notable exception of large $\sin{φ_S}$ modulations for charged pions and positive kaons. △ Less

Submitted 15 July, 2020; originally announced July 2020.

Report number: DESY-20-119

CMS RPC Background -- Studies and Measurements

Authors: R. Hadjiiska, A. Samalan, M. Tytgat, N. Zaganidis, G. A. Alves, F. Marujo, F. Torres Da Silva De Araujo, E. M. Da Costa, D. De Jesus Damiao, H. Nogima, A. Santoro, S. Fonseca De Souza, A. Aleksandrov, P. Iaydjiev, M. Rodozov, M. Shopova, G. Sultanov, M. Bonchev, A. Dimitrov, L. Litov, B. Pavlov, P. Petkov, A. Petrov, S. J. Qian, C. Bernal , et al. (84 additional authors not shown)

Abstract: The expected radiation background in the CMS RPC system has been studied using the MC prediction with the CMS FLUKA simulation of the detector and the cavern. The MC geometry used in the analysis describes very accurately the present RPC system but still does not include the complete description of the RPC upgrade region with pseudorapidity $1.9 < \lvert η\rvert < 2.4$. Present results will be upd… ▽ More The expected radiation background in the CMS RPC system has been studied using the MC prediction with the CMS FLUKA simulation of the detector and the cavern. The MC geometry used in the analysis describes very accurately the present RPC system but still does not include the complete description of the RPC upgrade region with pseudorapidity $1.9 < \lvert η\rvert < 2.4$. Present results will be updated with the final geometry description, once it is available. The radiation background has been studied in terms of expected particle rates, absorbed dose and fluence. Two High Luminosity LHC (HL-LHC) scenarios have been investigated - after collecting $3000$ and $4000$ fb$^{-1}$. Estimations with safety factor of 3 have been considered, as well. △ Less

Submitted 13 December, 2020; v1 submitted 26 May, 2020; originally announced May 2020.

Comments: 6 pages, Conference proceeding for the 2020 Resistive Plate Chambers and Related Detectors. Minor revision of the report, the results remain unchanged. Three new plots are added and some details were explained better

Particle Identification Using Boosted Decision Trees in the Semi-Digital Hadronic Calorimeter Prototype

Authors: D. Boumediene, A. Pingault, M. Tytgat, B. Bilki, D. Northacker, Y. Onel, G. Cho, D-W. Kim, S. C. Lee, W. Park, S. Vallecorsa, Y. Deguchi, K. Kawagoe, Y. Miura, R. Mori, I. Sekiya, T. Suehara, T. Yoshioka, L. Caponetto, C. Combaret, R. Ete G. Garillot, G. Grenier, J-C. Ianigro, T. Kurca, I. Laktineh , et al. (65 additional authors not shown)

Abstract: The CALICE Semi-Digital Hadronic CALorimeter (SDHCAL) prototype using Glass Resistive Plate Chambers as a sensitive medium is the first technological prototype of a family of high-granularity calorimeters developed by the CALICE collaboration to equip the experiments of future leptonic colliders. It was exposed to beams of hadrons, electrons and muons several times in the CERN PS and SPS beamlines… ▽ More The CALICE Semi-Digital Hadronic CALorimeter (SDHCAL) prototype using Glass Resistive Plate Chambers as a sensitive medium is the first technological prototype of a family of high-granularity calorimeters developed by the CALICE collaboration to equip the experiments of future leptonic colliders. It was exposed to beams of hadrons, electrons and muons several times in the CERN PS and SPS beamlines between 2012 and 2018. We present here a new method of particle identification within the SDHCAL using the Boosted Decision Trees (BDT) method applied to the data collected in 2015. The performance of the method is tested first with Geant4-based simulated events and then on the data collected by the SDHCAL in the energy range between 10 and 80~GeV with 10~GeV energy steps. The BDT method is then used to reject the electrons and muons that contaminate the SPS hadron beams. △ Less

Submitted 6 April, 2020; originally announced April 2020.

Report number: CALICE-PUB-2020-001

Beam-helicity asymmetries for single-hadron production in semi-inclusive deep-inelastic scattering from unpolarized hydrogen and deuterium targets

Authors: HERMES Collaboration, A. Airapetian, N. Akopov, Z. Akopov, E. C. Aschenauer, W. Augustyniak, S. Belostotski, H. P. Blok, V. Bryzgalov, G. P. Capitani, E. Cisbani, G. Ciullo, M. Contalbrigo, W. Deconinck, E. De Sanctis, M. Diefenthaler, P. Di Nezza, M. Düren, G. Elbakian, F. Ellinghaus, A. Fantoni, L. Felawka, G. Gapienko, F. Garibaldi, G. Gavrilov , et al. (51 additional authors not shown)

Abstract: A measurement of beam-helicity asymmetries for single-hadron production in deep-inelastic scattering is presented. Data from the scattering of 27.6 GeV electrons and positrons off gaseous hydrogen and deuterium targets were collected by the HERMES experiment. The asymmetries are presented separately as a function of the Bjorken scaling variable, the hadron transverse momentum, and the fractional e… ▽ More A measurement of beam-helicity asymmetries for single-hadron production in deep-inelastic scattering is presented. Data from the scattering of 27.6 GeV electrons and positrons off gaseous hydrogen and deuterium targets were collected by the HERMES experiment. The asymmetries are presented separately as a function of the Bjorken scaling variable, the hadron transverse momentum, and the fractional energy for charged pions and kaons as well as for protons and anti-protons. These asymmetries are also presented as a function of the three aforementioned kinematic variables simultaneously. △ Less

Submitted 16 September, 2019; v1 submitted 20 March, 2019; originally announced March 2019.

Report number: DESY 19-040

SO(10) paths to dark matter

Authors: Sacha Ferrari, Thomas Hambye, Julian Heeck, Michel H. G. Tytgat

Abstract: The grand-unification gauge group SO(10) contains matter parity as a discrete subgroup. This symmetry could be at the origin of dark matter stability. The properties of the dark matter candidates depend on the path along which SO(10) is broken, in particular through Pati-Salam or left-right symmetric subgroups. We systematically determine the non-supersymmetric dark matter scenarios that can be re… ▽ More The grand-unification gauge group SO(10) contains matter parity as a discrete subgroup. This symmetry could be at the origin of dark matter stability. The properties of the dark matter candidates depend on the path along which SO(10) is broken, in particular through Pati-Salam or left-right symmetric subgroups. We systematically determine the non-supersymmetric dark matter scenarios that can be realized along the various paths. We emphasize that the dark matter candidates may have colored or electrically charged partners at low scale that belong to the same SO(10) multiplet. These states, which in many cases are important for co-annihilation, could be observed more easily than the dark matter particle. We determine the structure of the tree-level and loop-induced mass splittings between the dark matter candidate and their partners and discuss the possible phenomenological implications. △ Less

Submitted 19 March, 2019; v1 submitted 19 November, 2018; originally announced November 2018.

Comments: 44 pages; added references, to appear in PRD

Report number: ULB-TH/18-14, UCI-TR-2018-17

Journal ref: Phys. Rev. D 99, 055032 (2019)

Longitudinal double-spin asymmetries in semi-inclusive deep-inelastic scattering of electrons and positrons by protons and deuterons

Authors: HERMES Collaboration, A. Airapetian, N. Akopov, Z. Akopov, E. C. Aschenauer, W. Augustyniak, R. Avakian, A. Avetissian, S. Belostotski, H. P. Blok, A. Borissov, V. Bryzgalov, G. P. Capitani, E. Cisbani, G. Ciullo, M. Contalbrigo, P. F. Dalpiaz, W. Deconinck, R. De Leo, L. De Nardo, E. De Sanctis, M. Diefenthaler, P. Di Nezza, M. Düren, G. Elbakian , et al. (74 additional authors not shown)

Abstract: A comprehensive collection of results on longitudinal double-spin asymmetries is presented for charged pions and kaons produced in semi-inclusive deep-inelastic scattering of electrons and positrons on the proton and deuteron, based on the full HERMES data set. The dependence of the asymmetries on hadron transverse momentum and azimuthal angle extends the sensitivity to the flavor structure of the… ▽ More A comprehensive collection of results on longitudinal double-spin asymmetries is presented for charged pions and kaons produced in semi-inclusive deep-inelastic scattering of electrons and positrons on the proton and deuteron, based on the full HERMES data set. The dependence of the asymmetries on hadron transverse momentum and azimuthal angle extends the sensitivity to the flavor structure of the nucleon beyond the distribution functions accessible in the collinear framework. No strong dependence on those variables is observed. In addition, the hadron charge-difference asymmetry is presented, which under certain model assumptions provides access to the helicity distributions of valence quarks. △ Less

Submitted 16 October, 2018; originally announced October 2018.

Report number: DESY 18-181

Journal ref: Phys. Rev. D 99, 112001 (2019)

High Rate RPC detector for LHC

Authors: F. Lagarde, A. Fagot, M. Gul, C. Roskas, M. Tytgat, N. Zaganidis, S. Fonseca De Souza, A. Santoro, F. Torres Da Silva De Araujo, A. Aleksandrov, R. Hadjiiska, P. Iaydjiev, M. Rodozov, M. Shopova, G. Sultanov, A. Dimitrov, L. Litov, B. Pavlov, P. Petkov, A. Petrov, S. J. Qian, D. Han, W. Yi, C. Avila, A. Cabrera , et al. (77 additional authors not shown)

Abstract: The High Luminosity LHC (HL-LHC) phase is designed to increase by an order of magnitude the amount of data to be collected by the LHC experiments. The foreseen gradual increase of the instantaneous luminosity of up to more than twice its nominal value of $10\times10^{34}\ {\rm cm}^{-1}{\rm s}^{-2}$ during Phase I and Phase II of the LHC running, presents special challenges for the experiments. The… ▽ More The High Luminosity LHC (HL-LHC) phase is designed to increase by an order of magnitude the amount of data to be collected by the LHC experiments. The foreseen gradual increase of the instantaneous luminosity of up to more than twice its nominal value of $10\times10^{34}\ {\rm cm}^{-1}{\rm s}^{-2}$ during Phase I and Phase II of the LHC running, presents special challenges for the experiments. The region with high pseudo rapidity ($η$) region of the forward muon spectrometer ($2.4 > |η| > 1.9$) is not equipped with RPC stations. The increase of the expected particles rate up to 2 kHz cm$^{-1}$ ( including a safety factor 3 ) motivates the installation of RPC chambers to guarantee redundancy with the CSC chambers already present. The current CMS RPC technology cannot sustain the expected background level. A new generation of Glass-RPC (GRPC) using low-resistivity glass was proposed to equip the two most far away of the four high $η$ muon stations of CMS. In their single-gap version they can stand rates of few kHz cm$^{-1}$. Their time precision of about 1 ns can allow to reduce the noise contribution leading to an improvement of the trigger rate. The proposed design for large size chambers is examined and some preliminary results obtained during beam tests at Gamma Irradiation Facility (GIF++) and Super Proton Synchrotron (SPS) at CERN are shown. They were performed to validate the capability of such detectors to support high irradiation environment with limited consequence on their efficiency. △ Less

Submitted 16 July, 2018; originally announced July 2018.

Ratios of helicity amplitudes for exclusive $ρ^0$ electroproduction on transversely polarized protons

Authors: The HERMES Collaboration, A. Airapetian, N. Akopov, Z. Akopov, E. C. Aschenauer, W. Augustyniak, S. Belostotski, H. P. Blok, A. Borissov, V. Bryzgalov, G. P. Capitani, G. Ciullo, M. Contalbrigo, W. Deconinck, R. De Leo, E. De Sanctis, M. Düren, G. Elbakian, F. Ellinghaus, L. Felawka, S. Frullani, F. Garibaldi, G. Gavrilov, V. Gharibyan, S. V. Goloskokov , et al. (52 additional authors not shown)

Abstract: Exclusive $ρ^0$-meson electroproduction is studied by the HERMES experiment, using the 27.6 GeV longitudinally polarized electron/positron beam of HERA and a transversely polarized hydrogen target, in the kinematic region 1.0 GeV$^2$<Q$^2$<7.0 GeV$^2$, 3.0 GeV<W<6.3 GeV, and -t'<0.4 GeV$^2$. Using an unbinned maximum-likelihood method, 25 parameters are extracted. These determine the real and imag… ▽ More Exclusive $ρ^0$-meson electroproduction is studied by the HERMES experiment, using the 27.6 GeV longitudinally polarized electron/positron beam of HERA and a transversely polarized hydrogen target, in the kinematic region 1.0 GeV$^2$<Q$^2$<7.0 GeV$^2$, 3.0 GeV<W<6.3 GeV, and -t'<0.4 GeV$^2$. Using an unbinned maximum-likelihood method, 25 parameters are extracted. These determine the real and imaginary parts of the ratios of several helicity amplitudes describing $ρ^0$-meson production by a virtual photon. The denominator of those ratios is the dominant amplitude, the nucleon-helicity-non-flip amplitude $F_{0\frac{1}{2}0\frac{1}{2}}$, which describes the production of a longitudinal $ρ^{0}$-meson by a longitudinal virtual photon. The ratios of nucleon-helicity-non-flip amplitudes are found to be in good agreement with those from the previous HERMES analysis. The transverse target polarization allows for the first time the extraction of ratios of a number of nucleon-helicity-flip amplitudes to $F_{0\frac{1}{2}0\frac{1}{2}}$. Results obtained in a handbag approach based on generalized parton distributions taking into account the contribution from pion exchange are found to be in good agreement with these ratios. Within the model, the data favor a positive sign for the $π-ρ$ transition form factor. By also exploiting the longitudinal beam polarization, a total of 71 $ρ^0$ spin-density matrix elements is determined from the extracted 25 parameters, in contrast to only 53 elements as directly determined in earlier analyses. △ Less

Submitted 13 June, 2017; v1 submitted 1 February, 2017; originally announced February 2017.

Report number: DESY-17-017

Journal ref: Eur.Phys.J. C77 (2017) 6, 378

R&D towards the CMS RPC Phase-2 upgrade

Authors: A. Fagot, A. Cimmino, S. Crucy, M. Gul, A. A. O. Rios, M. Tytgat, N. Zaganidis, S. Aly, Y. Assran, A. Radi, A. Sayed, G. Singh, M. Abbrescia, G. Iaselli, M. Maggi, G. Pugliese, P. Verwilligen, W. Van Doninck, S. Colafranceschi, A. Sharma, L. Benussi, S. Bianco, D. Piccolo, F. Primavera, V. Bhatnagar , et al. (71 additional authors not shown)

Abstract: The high pseudo-rapidity region of the CMS muon system is covered by Cathode Strip Chambers (CSC) only and lacks redundant coverage despite the fact that it is a challenging region for muons in terms of backgrounds and momentum resolution. In order to maintain good efficiency for the muon trigger in this region additional RPCs are planned to be installed in the two outermost stations at low angle… ▽ More The high pseudo-rapidity region of the CMS muon system is covered by Cathode Strip Chambers (CSC) only and lacks redundant coverage despite the fact that it is a challenging region for muons in terms of backgrounds and momentum resolution. In order to maintain good efficiency for the muon trigger in this region additional RPCs are planned to be installed in the two outermost stations at low angle named RE3/1 and RE4/1. These stations will use RPCs with finer granularity and good timing resolution to mitigate background effects and to increase the redundancy of the system. △ Less

Submitted 14 June, 2016; originally announced June 2016.

Comments: 13th Workshop on Resistive Plate Chambers and related detectors, 22-26 February 2016, Ghent University, Belgium

High rate, fast timing Glass RPC for the high η CMS muon detectors

Authors: F. Lagarde, M. Gouzevitch, I. Laktineh, V. Buridon, X. Chen, C. Combaret, A. Eynard, L. Germani, G. Grenier, H. Mathez, L. Mirabito, A. Petrukhin, A. Steen, W. Tromeuraa, Y. Wang, A. Gongab, N. Moreau, C. de la Taille, F. Dulucqac, A. Cimmino, S. Crucy, A. Fagot, M. Gul, A. A. O. Rios, M. Tytgat , et al. (86 additional authors not shown)

Abstract: The HL-LHC phase is designed to increase by an order of magnitude the amount of data to be collected by the LHC experiments. To achieve this goal in a reasonable time scale the instantaneous luminosity would also increase by an order of magnitude up to $6.10^{34} cm^{-2} s^{-1}$ . The region of the forward muon spectrometer ($|η| > 1.6$) is not equipped with RPC stations. The increase of the expec… ▽ More The HL-LHC phase is designed to increase by an order of magnitude the amount of data to be collected by the LHC experiments. To achieve this goal in a reasonable time scale the instantaneous luminosity would also increase by an order of magnitude up to $6.10^{34} cm^{-2} s^{-1}$ . The region of the forward muon spectrometer ($|η| > 1.6$) is not equipped with RPC stations. The increase of the expected particles rate up to $2 kHz/cm^{2}$ (including a safety factor 3) motivates the installation of RPC chambers to guarantee redundancy with the CSC chambers already present. The actual RPC technology of CMS cannot sustain the expected background level. The new technology that will be chosen should have a high rate capability and provides a good spatial and timing resolution. A new generation of Glass-RPC (GRPC) using low-resistivity (LR) glass is proposed to equip at least the two most far away of the four high $η$ muon stations of CMS. First the design of small size prototypes and studies of their performance in high-rate particles flux is presented. Then the proposed designs for large size chambers and their fast-timing electronic readout are examined and preliminary results are provided. △ Less

Submitted 22 July, 2016; v1 submitted 4 June, 2016; originally announced June 2016.

Comments: 14 pages, 11 figures, Conference proceeding for the 2016 Resistive Plate Chambers and Related Detectors

Preliminary results of Resistive Plate Chambers operated with eco-friendly gas mixtures for application in the CMS experiment

Authors: M. Abbrescia, P. Van Auwegem, L. Benussi, S. Bianco, S. Cauwenbergh, M. Ferrini, S. Muhammad, L. Passamonti, D. Pierluigi, D. Piccolo, F. Primavera, A. Russo, G. Saviano, M. Tytgat

Abstract: The operations of Resistive Plate Chambers in LHC experiments require Fluorine based (F-based) gases for optimal performance. Recent European regulations demand the use of environmentally unfriendly F-based gases to be limited or banned. In view of the CMS experiment upgrade, several tests are ongoing to measure the performance of the detector with these new ecological gas mixtures, in terms of ef… ▽ More The operations of Resistive Plate Chambers in LHC experiments require Fluorine based (F-based) gases for optimal performance. Recent European regulations demand the use of environmentally unfriendly F-based gases to be limited or banned. In view of the CMS experiment upgrade, several tests are ongoing to measure the performance of the detector with these new ecological gas mixtures, in terms of efficiency, streamer probability, induced charge and time resolution. Prototype chambers with readout pads and with the standard CMS electronic setup are under test. In this paper preliminary results on performance of RPCs operated with a potential eco-friendly gas candidate 1,3,3,3-Tetrafluoropropene, commercially known as HFO-1234ze, with CO2 and CF3I based gas mixtures are presented and discussed for the possible application in the CMS experiment. △ Less

Submitted 26 May, 2016; originally announced May 2016.

Comments: 7 pages, 7 figures. arXiv admin note: text overlap with arXiv:1505.01648

Performance of Resistive Plate Chambers installed during the first long shutdown of the CMS experiment

Authors: M. Shopova, A. Aleksandrov, R. Hadjiiska, P. Iaydjiev, G. Sultanov, M. Rodozov, S. Stoykova, Y. Assran, A. Sayed, A. Radi, S. Aly, G. Singh, M. Abbrescia, G. Iaselli, M. Maggi, G. Pugliese, P. Verwilligen, W. Van Doninck, S. Colafranceschi, A. Sharma, L. Benussi, S. Bianco, D. Piccolo, F. Primavera, A. Cimmino , et al. (71 additional authors not shown)

Abstract: The CMS experiment, located at the CERN Large Hadron Collider, has a redundant muon system composed by three different detector technologies: Cathode Strip Chambers (in the forward regions), Drift Tubes (in the central region) and Resistive Plate Chambers (both its central and forward regions). All three are used for muon reconstruction and triggering. During the first long shutdown (LS1) of the L… ▽ More The CMS experiment, located at the CERN Large Hadron Collider, has a redundant muon system composed by three different detector technologies: Cathode Strip Chambers (in the forward regions), Drift Tubes (in the central region) and Resistive Plate Chambers (both its central and forward regions). All three are used for muon reconstruction and triggering. During the first long shutdown (LS1) of the LHC (2013-2014) the CMS muon system has been upgraded with 144 newly installed RPCs on the forth forward stations. The new chambers ensure and enhance the muon trigger efficiency in the high luminosity conditions of the LHC Run2. The chambers have been successfully installed and commissioned. The system has been run successfully and experimental data has been collected and analyzed. The performance results of the newly installed RPCs will be presented. △ Less

Submitted 22 May, 2016; originally announced May 2016.

Comments: 5 pages, 6 figures, proceeding to The XIII workshop on Resistive Plate Chambers and Related Detectors (RPC2016)

Report number: CMS CR-2016/090

Radiation Tests of Real-Sized Prototype RPCs for the Future CMS RPC Upscope

Authors: K. S. Lee, S. Choi, B. S. Hong, M. Jo, J. W. Kang, M. Kang, H. Kim, K. Lee, S. K. Parka, A. Cimmino, S. Crucy, A. Fagot, M. Gul, A. A. O. Rios, M. Tytgat, N. Zaganidis, S. Ali, Y. Assran, A. Radi, A. Sayed, G. Singh, M. Abbrescia, G. Iaselli, M. Maggi, G. Pugliese , et al. (71 additional authors not shown)

Abstract: We report on a systematic study of double-gap and four-gap phenolic resistive plate chambers (RPCs) for future high-η RPC triggers in the CMS. In the present study, we constructed real-sized double-gap and four-gap RPCs with gap thicknesses of 1.6 and 0.8 mm, respectively, with 2-mm-thick phenolic high-pressure-laminated (HPL) plates. We examined the prototype RPCs for cosmic rays and 100 GeV muon… ▽ More We report on a systematic study of double-gap and four-gap phenolic resistive plate chambers (RPCs) for future high-η RPC triggers in the CMS. In the present study, we constructed real-sized double-gap and four-gap RPCs with gap thicknesses of 1.6 and 0.8 mm, respectively, with 2-mm-thick phenolic high-pressure-laminated (HPL) plates. We examined the prototype RPCs for cosmic rays and 100 GeV muons provided by the SPS H4 beam line at CERN. We applied maximum gamma rates of 1.5 kHz cm-2 provided by 137Cs sources at Korea University and the GIF++ irradiation facility installed at the SPS H4 beam line to examine the rate capabilities of the prototype RPCs. In contrast to the case of the four-gap RPCs, we found the relatively high threshold was conducive to effectively suppressing the rapid increase of strip cluster sizes of muon hits with high voltage, especially when measuring the narrow-pitch strips. The gamma-induced currents drawn in the four-gap RPC were about one-fourth of those drawn in the double-gap RPC. The rate capabilities of both RPC types, proven through the present testing using gamma-ray sources, far exceeded the maximum rate expected in the new high-η endcap RPCs planned for future phase-II LHC runs. △ Less

Submitted 4 May, 2016; v1 submitted 2 May, 2016; originally announced May 2016.

Comments: Conference proceeding for the 2016 Resistive Plate Chambers and Related Detectors 8 pages, 9 figures

Resistive Plate Chamber Digitization in a Hadronic Shower Environment

Authors: Z. Deng, Y. Li, Y. Wang, Q. Yue, Z. Yang, J. Apostolakis, G. Folger, C. Grefe, V. Ivantchenko, A. Ribon, V. Uzhinskiy, D. Boumediene, C. Carloganu, V. Français, G. Cho, D-W. Kim, S. C. Lee, W. Park, S. Vallecorsa, S. Cauwenbergh, M. Tytgat, A. Pingault, N. Zaganidis, E. Brianne, A. Ebrahimi , et al. (103 additional authors not shown)

Abstract: The CALICE Semi-Digital Hadron Calorimeter (SDHCAL) technological prototype is a sampling calorimeter using Glass Resistive Plate Chamber detectors with a three-threshold readout as the active medium. This technology is one of the two options proposed for the hadron calorimeter of the International Large Detector for the International Linear Collider. The prototype was exposed to beams of muons, e… ▽ More The CALICE Semi-Digital Hadron Calorimeter (SDHCAL) technological prototype is a sampling calorimeter using Glass Resistive Plate Chamber detectors with a three-threshold readout as the active medium. This technology is one of the two options proposed for the hadron calorimeter of the International Large Detector for the International Linear Collider. The prototype was exposed to beams of muons, electrons and pions of different energies at the CERN Super Proton Synchrotron. To be able to study the performance of such a calorimeter in future experiments it is important to ensure reliable simulation of its response. In this paper we present our prototype simulation performed with GEANT4 and the digitization procedure achieved with an algorithm called SimDigital. A detailed description of this algorithm is given and the methods to determinate its parameters using muon tracks and electromagnetic showers are explained. The comparison with hadronic shower data shows a good agreement up to 50 GeV. Discrepancies are observed at higher energies. The reasons for these differences are investigated. △ Less

Submitted 15 April, 2016; originally announced April 2016.

First results of the CALICE SDHCAL technological prototype

Authors: V. Buridon, C. Combaret, L. Caponetto, R. Eté, G. Garillot, G. Grenier, R. Han, J. C. Ianigro, R. Kieffer, I. Laktineh, N. Lumb, H. Mathez, L. Mirabito, A. Petrukhin, A. Steen, J. Berenguer Antequera, E. Calvo Alamillo, M. -C. Fouz, J. Marin, J. Puerta-Pelayo, A. Verdugo, E. Cortina Gil, S. Mannai, S. Cauwenbergh, M. Tytgat , et al. (96 additional authors not shown)

Abstract: The CALICE Semi-Digital Hadronic Calorimeter (SDHCAL) prototype, built in 2011, was exposed to beams of hadrons, electrons and muons in two short periods in 2012 on two different beam lines of the CERN SPS. The prototype with its 48 active layers, made of Glass Resistive Plate Chambers and their embedded readout electronics, was run in triggerless and power-pulsing mode. The performance of the SDH… ▽ More The CALICE Semi-Digital Hadronic Calorimeter (SDHCAL) prototype, built in 2011, was exposed to beams of hadrons, electrons and muons in two short periods in 2012 on two different beam lines of the CERN SPS. The prototype with its 48 active layers, made of Glass Resistive Plate Chambers and their embedded readout electronics, was run in triggerless and power-pulsing mode. The performance of the SDHCAL during the test beam was found to be very satisfactory with an efficiency exceeding 90% for almost all of the 48 active layers. A linear response (within 5%) and a good energy resolution are obtained for a large range of hadronic energies (5-80GeV) by applying appropriate calibration coefficients to the collected data for both the Digital (Binary) and the Semi-Digital (Multi-threshold) modes of the SDHCAL prototype. The Semi-Digital mode shows better performance at energies exceeding 30GeV △ Less

Submitted 20 March, 2016; v1 submitted 6 February, 2016; originally announced February 2016.

Transverse-target-spin asymmetry in exclusive $ω$-meson electroproduction

Authors: The HERMES Collaboration, A. Airapetian, N. Akopov, Z. Akopov, E. C. Aschenauer, W. Augustyniak, A. Avetissian, S. Belostotski, H. P. Blok, A. Borissov, V. Bryzgalov, G. P. Capitani, G. Ciullo, M. Contalbrigo, P. F. Dalpiaz, W. Deconinck, R. De Leo, E. De Sanctis, M. Diefenthaler, P. Di Nezza, M. Düren, G. Elbakian, F. Ellinghaus, L. Felawka, S. Frullani , et al. (71 additional authors not shown)

Abstract: Hard exclusive electroproduction of $ω$ mesons is studied with the HERMES spectrometer at the DESY laboratory by scattering 27.6 GeV positron and electron beams off a transversely polarized hydrogen target. The amplitudes of five azimuthal modulations of the single-spin asymmetry of the cross section with respect to the transverse proton polarization are measured. They are determined in the entire… ▽ More Hard exclusive electroproduction of $ω$ mesons is studied with the HERMES spectrometer at the DESY laboratory by scattering 27.6 GeV positron and electron beams off a transversely polarized hydrogen target. The amplitudes of five azimuthal modulations of the single-spin asymmetry of the cross section with respect to the transverse proton polarization are measured. They are determined in the entire kinematic region as well as for two bins in photon virtuality and momentum transfer to the nucleon. Also, a separation of asymmetry amplitudes into longitudinal and transverse components is done. These results are compared to a phenomenological model that includes the pion pole contribution. Within this model, the data favor a positive $πω$ transition form factor. △ Less

Submitted 15 December, 2015; v1 submitted 30 August, 2015; originally announced August 2015.

Comments: DESY Report 15-149

Construction and commissioning of a technological prototype of a high-granularity semi-digital hadronic calorimeter

Authors: G. Baulieu, M. Bedjidian, K. Belkadhi, J. Berenguer, V. Boudry, P. Calabria, S. Callier, E. Calvo Almillo, S. Cap, L. Caponetto, C. Combaret, R. Cornat, E. Cortina Gil, B. de Callatay, F. Davin, C. de la Taille, R. Dellanegra, D. Delaunay, F. Doizon, F. Dulucq, A. Eynard, M-C. Fouz, F. Gastaldi, L. Germani, G. Grenier , et al. (21 additional authors not shown)

Abstract: A large prototype of 1.3m3 was designed and built as a demonstrator of the semi-digital hadronic calorimeter (SDHCAL) concept proposed for the future ILC experiments. The prototype is a sampling hadronic calorimeter of 48 units. Each unit is built of an active layer made of 1m2 Glass Resistive Plate Chamber(GRPC) detector placed inside a cassette whose walls are made of stainless steel. The casset… ▽ More A large prototype of 1.3m3 was designed and built as a demonstrator of the semi-digital hadronic calorimeter (SDHCAL) concept proposed for the future ILC experiments. The prototype is a sampling hadronic calorimeter of 48 units. Each unit is built of an active layer made of 1m2 Glass Resistive Plate Chamber(GRPC) detector placed inside a cassette whose walls are made of stainless steel. The cassette contains also the electronics used to read out the GRPC detector. The lateral granularity of the active layer is provided by the electronics pick-up pads of 1cm2 each. The cassettes are inserted into a self-supporting mechanical structure built also of stainless steel plates which, with the cassettes walls, play the role of the absorber. The prototype was designed to be very compact and important efforts were made to minimize the number of services cables to optimize the efficiency of the Particle Flow Algorithm techniques to be used in the future ILC experiments. The different components of the SDHCAL prototype were studied individually and strict criteria were applied for the final selection of these components. Basic calibration procedures were performed after the prototype assembling. The prototype is the first of a series of new-generation detectors equipped with a power-pulsing mode intended to reduce the power consumption of this highly granular detector. A dedicated acquisition system was developed to deal with the output of more than 440000 electronics channels in both trigger and triggerless modes. After its completion in 2011, the prototype was commissioned using cosmic rays and particles beams at CERN. △ Less

Submitted 24 October, 2015; v1 submitted 15 June, 2015; originally announced June 2015.

Comments: 49 pages, 41 figures

Bose-Einstein correlations in hadron-pairs from lepto-production on nuclei ranging from hydrogen to xenon

Authors: HERMES Collaboration, A. Airapetian, N. Akopov, Z. Akopov, E. C. Aschenauer, W. Augustyniak, R. Avakian, A. Avetissian, E. Avetisyan, S. Belostotski, N. Bianchi, H. P. Blok, A. Borissov, V. Bryzgalov, J. Burns, M. Capiluppi, G. P. Capitani, E. Cisbani, G. Ciullo, M. Contalbrigo, P. F. Dalpiaz, W. Deconinck, R. De Leo, E. De Sanctis, M. Diefenthaler , et al. (94 additional authors not shown)

Abstract: Bose-Einstein correlations of like-sign charged hadrons produced in deep-inelastic electron and positron scattering are studied in the HERMES experiment using nuclear targets of $^1$H, $^2$H, $^3$He, $^4$He, N, Ne, Kr, and Xe. A Gaussian approach is used to parametrize a two-particle correlation function determined from events with at least two charged hadrons of the same sign charge. This correla… ▽ More Bose-Einstein correlations of like-sign charged hadrons produced in deep-inelastic electron and positron scattering are studied in the HERMES experiment using nuclear targets of $^1$H, $^2$H, $^3$He, $^4$He, N, Ne, Kr, and Xe. A Gaussian approach is used to parametrize a two-particle correlation function determined from events with at least two charged hadrons of the same sign charge. This correlation function is compared to two different empirical distributions that do not include the Bose-Einstein correlations. One distribution is derived from unlike-sign hadron pairs, and the second is derived from mixing like-sign pairs from different events. The extraction procedure used simulations incorporating the experimental setup in order to correct the results for spectrometer acceptance effects, and was tested using the distribution of unlike-sign hadron pairs. Clear signals of Bose-Einstein correlations for all target nuclei without a significant variation with the nuclear target mass are found. Also, no evidence for a dependence on the invariant mass W of the photon-nucleon system is found when the results are compared to those of previous experiments. △ Less

Submitted 18 July, 2015; v1 submitted 12 May, 2015; originally announced May 2015.

Report number: DESY-15-074

Pentaquark $Θ^+$ search at HERMES

Authors: The HERMES Collaboration, N. Akopov, Z. Akopov, W. Augustyniak, R. Avakian, A. Avetissian, E. Avetisyan, S. Belostotski, H. P. Blok, A. Borissov, J. Bowles, V. Bryzgalov, J. Burns, G. P. Capitani, E. Cisbani, G. Ciullo, M. Contalbrigo, P. F. Dalpiaz, W. Deconinck, R. De Leo, E. De Sanctis, P. Di Nezza, G. Elbakian, E. Etzelmüller, R. Fabbri , et al. (81 additional authors not shown)

Abstract: The earlier search at HERMES for narrow baryon states excited in quasi-real photoproduction, decaying through the channel $pK_S^0\rightarrow pπ^+π^-$, has been extended with improved decay-particle reconstruction, more advanced particle identification, and increased event samples. The structure observed earlier at an invariant mass of 1528 MeV shifts to 1522 MeV and the statistical significance dr… ▽ More The earlier search at HERMES for narrow baryon states excited in quasi-real photoproduction, decaying through the channel $pK_S^0\rightarrow pπ^+π^-$, has been extended with improved decay-particle reconstruction, more advanced particle identification, and increased event samples. The structure observed earlier at an invariant mass of 1528 MeV shifts to 1522 MeV and the statistical significance drops to about 2$σ$ for data taken with a deuterium target. The number of events above background is $68_{-31}^{+98}\text{(stat)}\pm13\text{(sys)}$. No such structure is observed in the hydrogen data set. △ Less

Submitted 27 April, 2015; v1 submitted 23 December, 2014; originally announced December 2014.

Report number: DESY 14-245

Journal ref: Phys. Rev. D 91, 057101 (2015)

Testing Hadronic Interaction Models using a Highly Granular Silicon-Tungsten Calorimeter

Authors: The CALICE Collaboration, B. Bilki, J. Repond, J. Schlereth, L. Xia, Z. Deng, Y. Li, Y. Wang, Q. Yue, Z. Yang, G. Eigen, Y. Mikami, T. Price, N. K. Watson, M. A. Thomson, D. R. Ward, D. Benchekroun, A. Hoummada, Y. Khoulaki, C. Cârloganu, S. Chang, A. Khan, D. H. Kim, D. J. Kong, Y. D. Oh , et al. (127 additional authors not shown)

Abstract: A detailed study of hadronic interactions is presented using data recorded with the highly granular CALICE silicon-tungsten electromagnetic calorimeter. Approximately 350,000 selected negatively charged pion events at energies between 2 and 10 GeV have been studied. The predictions of several physics models available within the Geant4 simulation tool kit are compared to this data. A reasonable ove… ▽ More A detailed study of hadronic interactions is presented using data recorded with the highly granular CALICE silicon-tungsten electromagnetic calorimeter. Approximately 350,000 selected negatively charged pion events at energies between 2 and 10 GeV have been studied. The predictions of several physics models available within the Geant4 simulation tool kit are compared to this data. A reasonable overall description of the data is observed; the Monte Carlo predictions are within 20% of the data, and for many observables much closer. The largest quantitative discrepancies are found in the longitudinal and transverse distributions of reconstructed energy. △ Less

Submitted 8 May, 2015; v1 submitted 26 November, 2014; originally announced November 2014.

Comments: 28 pages, 24 figures, accepted for publication in NIM A

Journal ref: Nucl. Instrum. Meth. A 794: 240-254, 2015

Observation of the rare $B^0_s\toμ^+μ^-$ decay from the combined analysis of CMS and LHCb data

Authors: The CMS, LHCb Collaborations, :, V. Khachatryan, A. M. Sirunyan, A. Tumasyan, W. Adam, T. Bergauer, M. Dragicevic, J. Erö, M. Friedl, R. Frühwirth, V. M. Ghete, C. Hartl, N. Hörmann, J. Hrubec, M. Jeitler, W. Kiesenhofer, V. Knünz, M. Krammer, I. Krätschmer, D. Liko, I. Mikulec, D. Rabady, B. Rahbaran , et al. (2807 additional authors not shown)

Abstract: A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six sta… ▽ More A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six standard deviations, and the best measurement of its branching fraction so far. Furthermore, evidence for the $B^0\toμ^+μ^-$ decay is obtained with a statistical significance of three standard deviations. The branching fraction measurements are statistically compatible with SM predictions and impose stringent constraints on several theories beyond the SM. △ Less

Submitted 17 August, 2015; v1 submitted 17 November, 2014; originally announced November 2014.

Comments: Correspondence should be addressed to [email protected]

Report number: CERN-PH-EP-2014-220, CMS-BPH-13-007, LHCb-PAPER-2014-049

Journal ref: Nature 522, 68-72 (04 June 2015)

Spin density matrix elements in exclusive $ω$ electroproduction on $^1$H and $^2$H targets at 27.5 GeV beam energy

Authors: The HERMES Collaboration, A. Airapetian, N. Akopov, Z. Akopov, W. Augustyniak, A. Avetissian, H. P. Blok, A. Borissov, V. Bryzgalov, M. Capiluppi, G. P. Capitani, E. Cisbani, G. Ciullo, M. Contalbrigo, P. F. Dalpiaz, W. Deconinck, R. De Leo, E. De Sanctis, M. Diefenthaler, P. Di Nezza, M. Düren, M. Ehrenfried, G. Elbakian, F. Ellinghaus, E. Etzelmüller , et al. (75 additional authors not shown)

Abstract: Exclusive electroproduction of $ω$ mesons on unpolarized hydrogen and deuterium targets is studied in the kinematic region of Q$^2$>1.0 GeV$^2$, 3.0 GeV < W < 6.3 GeV, and -t'< 0.2 GeV$^2$. Results on the angular distribution of the $ω$ meson, including its decay products, are presented. The data were accumulated with the HERMES forward spectrometer during the 1996-2007 running period using the 27… ▽ More Exclusive electroproduction of $ω$ mesons on unpolarized hydrogen and deuterium targets is studied in the kinematic region of Q$^2$>1.0 GeV$^2$, 3.0 GeV < W < 6.3 GeV, and -t'< 0.2 GeV$^2$. Results on the angular distribution of the $ω$ meson, including its decay products, are presented. The data were accumulated with the HERMES forward spectrometer during the 1996-2007 running period using the 27.6 GeV longitudinally polarized electron or positron beam of HERA. The determination of the virtual-photon longitudinal-to-transverse cross-section ratio reveals that a considerable part of the cross section arises from transversely polarized photons. Spin density matrix elements are presented in projections of Q$^2$ or -t'. Violation of s-channel helicity conservation is observed for some of these elements. A sizable contribution from unnatural-parity-exchange amplitudes is found and the phase shift between those amplitudes that describe transverse $ω$ production by longitudinal and transverse virtual photons, $γ^{*}_{L} \to ω_{T}$ and $γ^{*}_{T} \to ω_{T}$, is determined for the first time. A hierarchy of helicity amplitudes is established, which mainly means that the unnatural-parity-exchange amplitude describing the $γ^*_T \to ω_T$ transition dominates over the two natural-parity-exchange amplitudes describing the $γ^*_L \to ω_L$ and $γ^*_T \to ω_T$ transitions, with the latter two being of similar magnitude. Good agreement is found between the HERMES proton data and results of a pQCD-inspired phenomenological model that includes pion-pole contributions, which are of unnatural parity. △ Less

Submitted 1 March, 2016; v1 submitted 8 July, 2014; originally announced July 2014.

Comments: "Erratum version", e.g., includes the corrected version of Figure 6, to be published in "Erratum to: Spin density matrix elements in exclusive omega electroproduction on 1H and 2H targets at 27.5 GeV beam energy". Three SDMEs were mislabeled in the figure of the previously published version [EPJC74(2014)3110]. The labels have been fixed, while none of the results or conclusions changed

Report number: DESY 14-116

Transverse polarization of $Λ$ hyperons from quasireal photoproduction on nuclei

Authors: The HERMES Collaboration, A. Airapetian, N. Akopov, Z. Akopov, E. C. Aschenauer, W. Augustyniak, R. Avakian, A. Avetissian, E. Avetisyan, S. Belostotski, N. Bianchi, H. P. Blok, A. Borissov, J. Bowles, I. Brodski, V. Bryzgalov, J. Burns, M. Capiluppi, G. P. Capitani, E. Cisbani, G. Ciullo, M. Contalbrigo, P. F. Dalpiaz, W. Deconinck, R. De Leo , et al. (112 additional authors not shown)

Abstract: The transverse polarization of $Λ$ hyperons was measured in inclusive quasireal photoproduction for various target nuclei ranging from hydrogen to xenon. The data were obtained by the HERMES experiment at HERA using the 27.6 GeV lepton beam and nuclear gas targets internal to the lepton storage ring. The polarization observed is positive for light target nuclei and is compatible with zero for kryp… ▽ More The transverse polarization of $Λ$ hyperons was measured in inclusive quasireal photoproduction for various target nuclei ranging from hydrogen to xenon. The data were obtained by the HERMES experiment at HERA using the 27.6 GeV lepton beam and nuclear gas targets internal to the lepton storage ring. The polarization observed is positive for light target nuclei and is compatible with zero for krypton and xenon. △ Less

Submitted 3 October, 2014; v1 submitted 12 June, 2014; originally announced June 2014.

Comments: final version to be published in Phys. Rev. D (in press)

Report number: DESY 14-097

Journal ref: Phys. Rev. D 90, 072007 (2014)

The Time Structure of Hadronic Showers in highly granular Calorimeters with Tungsten and Steel Absorbers

Authors: C. Adloff, J. -J. Blaising, M. Chefdeville, C. Drancourt, R. Gaglione, N. Geffroy, Y. Karyotakis, I. Koletsou, J. Prast, G. Vouters J. Repond, J. Schlereth, L. Xia E. Baldolemar, J. Li, S. T. Park, M. Sosebee, A. P. White, J. Yu, G. Eigen, M. A. Thomson, D. R. Ward, D. Benchekroun, A. Hoummada, Y. Khoulaki J. Apostolakis, S. Arfaoui, M. Benoit , et al. (188 additional authors not shown)

Abstract: The intrinsic time structure of hadronic showers influences the timing capability and the required integration time of hadronic calorimeters in particle physics experiments, and depends on the active medium and on the absorber of the calorimeter. With the CALICE T3B experiment, a setup of 15 small plastic scintillator tiles read out with Silicon Photomultipliers, the time structure of showers is m… ▽ More The intrinsic time structure of hadronic showers influences the timing capability and the required integration time of hadronic calorimeters in particle physics experiments, and depends on the active medium and on the absorber of the calorimeter. With the CALICE T3B experiment, a setup of 15 small plastic scintillator tiles read out with Silicon Photomultipliers, the time structure of showers is measured on a statistical basis with high spatial and temporal resolution in sampling calorimeters with tungsten and steel absorbers. The results are compared to GEANT4 (version 9.4 patch 03) simulations with different hadronic physics models. These comparisons demonstrate the importance of using high precision treatment of low-energy neutrons for tungsten absorbers, while an overall good agreement between data and simulations for all considered models is observed for steel. △ Less

Submitted 21 July, 2014; v1 submitted 25 April, 2014; originally announced April 2014.

Comments: 24 pages including author list, 9 figures, published in JINST

Report number: MPP-2014-147

Journal ref: JINST 9 (2014) P07022

Invisible Z' and dark matter: LHC vs LUX constraints

Authors: Giorgio Arcadi, Yann Mambrini, Michel H. G. Tytgat, Bryan Zaldivar

Abstract: We consider a simple, yet generic scenario in which a new heavy $Z'$ gauge boson couples both to SM fermions and to dark matter. In this framework we confront the best LHC limits on an extra gauge boson $Z'$ to the constraints on couplings to dark matter from direct detection experiments. In particular we show that the LHC searches for resonant production of dileptons and the recent exclusion limi… ▽ More We consider a simple, yet generic scenario in which a new heavy $Z'$ gauge boson couples both to SM fermions and to dark matter. In this framework we confront the best LHC limits on an extra gauge boson $Z'$ to the constraints on couplings to dark matter from direct detection experiments. In particular we show that the LHC searches for resonant production of dileptons and the recent exclusion limits obtained by the LUX collaboration give complementary constraints. Together, they impose strong bounds on the invisible branching ratio and exclude a large part of the parameter space for generic $Z'$ models. Our study encompasses many possible $Z'$ models, including SSM, $E_6$-inspired or B-L scenario. △ Less

Submitted 21 February, 2014; v1 submitted 31 December, 2013; originally announced January 2014.

Comments: Figure and references added. Accepted for publication in JHEP