-
Detector for measuring the $π^+\to e^+ν_e$ branching fraction
Authors:
A. A. Aguilar-Arevalo,
M. Aoki,
M. Blecher,
D. vom Bruch,
D. Bryman,
J. Comfort,
S. Cuen-Rochin,
L. Doria,
P. Gumplinger,
A. Hussein,
Y. Igarashi,
N. Ito,
S. Ito,
S. H. Kettell,
L. Kurchaninov,
L. Littenberg,
C. Malbrunot,
R. E. Mischke,
A. Muroi,
T. Numao,
G. Sheffer,
A. Sher,
T. Sullivan,
K. Tauchi,
D. Vavilov
, et al. (2 additional authors not shown)
Abstract:
The PIENU experiment at TRIUMF is aimed at a measurement of the branching ratio $R^{e/μ}$ = ${Γ\big((π^{+} \rightarrow e^{+} ν_{e}) + (π^{+} \rightarrow e^{+} ν_{e}γ)\big)}/{Γ\big((π^{+} \rightarrow μ^{+} ν_μ)+(π^{+} \rightarrow μ^{+} ν_μγ)\big)}$ with precision $<$0.1\%. Incident pions, delivered at the rate of 60 kHz with momentum 75 MeV/c, were degraded and stopped in a plastic scintillator tar…
▽ More
The PIENU experiment at TRIUMF is aimed at a measurement of the branching ratio $R^{e/μ}$ = ${Γ\big((π^{+} \rightarrow e^{+} ν_{e}) + (π^{+} \rightarrow e^{+} ν_{e}γ)\big)}/{Γ\big((π^{+} \rightarrow μ^{+} ν_μ)+(π^{+} \rightarrow μ^{+} ν_μγ)\big)}$ with precision $<$0.1\%. Incident pions, delivered at the rate of 60 kHz with momentum 75 MeV/c, were degraded and stopped in a plastic scintillator target. Pions and their decay product positrons were detected with plastic scintillators and tracked with multiwire proportional chambers and silicon strip detectors. The energies of the positrons were measured in a spectrometer consisting of a large NaI(T$\ell$) crystal surrounded by an array of pure CsI crystals. This paper provides a description of the PIENU experimental apparatus and its performance in pursuit of $R^{e/μ}$.
△ Less
Submitted 11 May, 2015;
originally announced May 2015.
-
On-site Background Measurements for the J-PARC E56 Experiment: A Search for Sterile Neutrino at J-PARC MLF
Authors:
S. Ajimura,
T. J. C. Bezerra,
E. Chauveau,
T. Enomoto,
H. Furuta,
M. Harada,
S. Hasegawa,
T. Hiraiwa,
Y. Igarashi,
E. Iwai,
T. Maruyama,
S. Meigo,
T. Nakano,
M. Niiyama,
K. Nishikawa,
M. Nomachi,
R. Ohta,
H. Sakai,
K. Sakai,
S. Sakamoto,
T. Shima,
F. Suekane,
S. Y. Suzuki,
K. Suzuya,
K. Tauchi
Abstract:
The J-PARC E56 experiment aims to search for sterile neutrinos at the J-PARC Materials and Life Science Experimental Facility (MLF). In order to examine the feasibility of the experiment, we measured the background rates of different detector candidate sites, which are located at the third floor of the MLF, using a detector consisting of plastic scintillators with a fiducial mass of 500 kg. The re…
▽ More
The J-PARC E56 experiment aims to search for sterile neutrinos at the J-PARC Materials and Life Science Experimental Facility (MLF). In order to examine the feasibility of the experiment, we measured the background rates of different detector candidate sites, which are located at the third floor of the MLF, using a detector consisting of plastic scintillators with a fiducial mass of 500 kg. The result of the measurements is described in this article. The gammas and neutrons induced by the beam as well as the backgrounds from the cosmic rays were measured.
△ Less
Submitted 22 April, 2015; v1 submitted 23 February, 2015;
originally announced February 2015.
-
Development of a PCI Based Data Acquisition Platform for High Intensity Accelerator Experiments
Authors:
T. Higuchi,
H. Fujii,
M. Ikeno,
Y. Igarashi,
E. Inoue,
R. Itoh,
H. Kodama,
T. Murakami,
M. Nakao,
K. Nakayoshi,
M. Saitoh,
S. Shimazaki,
S. Y. Suzuki,
M. Tanaka,
K. Tauchi,
M. Yamauchi,
Y. Yasu,
G. Varner,
Y. Nagasaka,
T. Katayama,
K. Watanabe,
M. Ishizuka,
S. Onozawa,
C. J. Li
Abstract:
Data logging at an upgraded KEKB accelerator or the J-PARC facility, currently under commission, requires a high density data acquisition platform with integrated data reduction CPUs. To follow market trends, we have developed a DAQ platform based on the PCI bus, a choice which permits a fast DAQ and a long expected lifetime of the system. The platform is a 9U-VME motherboard consisting of four…
▽ More
Data logging at an upgraded KEKB accelerator or the J-PARC facility, currently under commission, requires a high density data acquisition platform with integrated data reduction CPUs. To follow market trends, we have developed a DAQ platform based on the PCI bus, a choice which permits a fast DAQ and a long expected lifetime of the system. The platform is a 9U-VME motherboard consisting of four slots for signal digitization modules, readout FIFOs for data buffering, and three PMC slots, on one of which resides a data reduction CPU. We have performed long term and thermal stability tests. The readout speed on the platform has been measured up to 125 MB/s in DMA mode.
△ Less
Submitted 28 May, 2003;
originally announced May 2003.
-
Near Muon Range Detector for the K2K Experiment -Construction and Performance-
Authors:
K2K MRD Group,
T. Ishii,
T. Inagaki,
J. Breault,
T. Chikamatsu,
J. H. Choi,
T. Hasegawa,
Y. Hayato,
T. Ishida,
H. I. Jang,
J. S. Jang,
E. M. Jeong,
I. Kato,
A. Kibayashi,
B. J. Kim,
H. I. Kim,
J. Y. Kim,
S. B. Kim,
T. Kobayashi,
W. Kropp,
H. K. Lee,
S. B. Lee,
I. T. Lim,
K. J. Ma,
T. Maruyama
, et al. (14 additional authors not shown)
Abstract:
A muon range detector (MRD) has been constructed as a near detector for the KEK-to-Kamioka long-baseline neutrino experiment (K2K). It monitors the neutrino beam properties at the near site by measuring the energy, angle and production point of muons produced by charged-current neutrino interaction. The detector has been working stably since the start of the K2K experiment.
A muon range detector (MRD) has been constructed as a near detector for the KEK-to-Kamioka long-baseline neutrino experiment (K2K). It monitors the neutrino beam properties at the near site by measuring the energy, angle and production point of muons produced by charged-current neutrino interaction. The detector has been working stably since the start of the K2K experiment.
△ Less
Submitted 17 July, 2001;
originally announced July 2001.
