Showing 1–11 of 11 results for author: Silverstein, S

Particle Physics at the European Spallation Source

Authors: H. Abele, A. Alekou, A. Algora, K. Andersen, S. Baessler, L. Barron-Palos, J. Barrow, E. Baussan, P. Bentley, Z. Berezhiani, Y. Bessler, A. K. Bhattacharyya, A. Bianchi, J. Bijnens, C. Blanco, N. Blaskovic Kraljevic, M. Blennow, K. Bodek, M. Bogomilov, C. Bohm, B. Bolling, E. Bouquerel, G. Brooijmans, L. J. Broussard, O. Buchan , et al. (154 additional authors not shown)

Abstract: Presently under construction in Lund, Sweden, the European Spallation Source (ESS) will be the world's brightest neutron source. As such, it has the potential for a particle physics program with a unique reach and which is complementary to that available at other facilities. This paper describes proposed particle physics activities for the ESS. These encompass the exploitation of both the neutrons… ▽ More Presently under construction in Lund, Sweden, the European Spallation Source (ESS) will be the world's brightest neutron source. As such, it has the potential for a particle physics program with a unique reach and which is complementary to that available at other facilities. This paper describes proposed particle physics activities for the ESS. These encompass the exploitation of both the neutrons and neutrinos produced at the ESS for high precision (sensitivity) measurements (searches). △ Less

Submitted 30 January, 2024; v1 submitted 18 November, 2022; originally announced November 2022.

Comments: 121 pages, updated version after referee comments

Radiation studies performed on the High Luminosity ATLAS TileCal link Daughterboard

Authors: Eduardo Valdes Santurio, Samuel Silverstein, Katherine Dunne, Christian Bohm, Holger Motzkau, Christophe Clement, Suhyun Lee

Abstract: The new electronics of the ATLAS Tile Calorimeter for the HL-LHC interfaces the on-detector and off-detector electronics by means of a Daughterboard. The Daughterboard is positioned on-detector featuring commercial SFPs+, CERN GBTx ASICs, ProASIC FPGAs and Kintex Ultrascale FPGAs. The design minimizes single points of failure and mitigates radiation damage by means of a double redundant scheme, Tr… ▽ More The new electronics of the ATLAS Tile Calorimeter for the HL-LHC interfaces the on-detector and off-detector electronics by means of a Daughterboard. The Daughterboard is positioned on-detector featuring commercial SFPs+, CERN GBTx ASICs, ProASIC FPGAs and Kintex Ultrascale FPGAs. The design minimizes single points of failure and mitigates radiation damage by means of a double redundant scheme, Triple Mode Redundancy, Xilinx Soft Error Mitigation IP, CRC/FEC for link data transfer, and SEL protection circuitry. We present an updated summary of the TID, NIEL and SEE qualification tests, and performance studies of the Daughterboard revision 6 design. △ Less

Submitted 6 March, 2023; v1 submitted 16 October, 2022; originally announced October 2022.

Comments: 5 pages, 5 figures

The Development of the NNBAR Experiment

Authors: F. Backman, J. Barrow, Y. Beßler, A. Bianchi, C. Bohm, G. Brooijmans, L. J. Broussard, H. Calen, J. Cederkäll, J. I. M. Damian, E. Dian, D. D. Di Julio, K. Dunne, L. Eklund, M. J. Ferreira, P. Fierlinger, U. Friman-Gayer, C. Happe, M. Holl, T. Johansson, Y. Kamyshkov, E. Klinkby, R. Kolevatov, A. Kupsc, B. Meirose , et al. (18 additional authors not shown)

Abstract: The NNBAR experiment for the European Spallation Source will search for free neutrons converting to antineutrons with a sensitivity improvement of three orders of magnitude compared to the last such search. This paper describes progress towards a conceptual design report for NNBAR. The design of a moderator, neutron reflector, beamline, shielding and annihilation detector is reported. The simulati… ▽ More The NNBAR experiment for the European Spallation Source will search for free neutrons converting to antineutrons with a sensitivity improvement of three orders of magnitude compared to the last such search. This paper describes progress towards a conceptual design report for NNBAR. The design of a moderator, neutron reflector, beamline, shielding and annihilation detector is reported. The simulations used form part of a model which will be used for optimisation of the experiment design and quantification of its sensitivity. △ Less

Submitted 19 September, 2022; originally announced September 2022.

Comments: 30 pages, 26 figures, accepted for publication in Journal of Instrumentation (JINST)

Development of a High Intensity Neutron Source at the European Spallation Source: The HighNESS project

Authors: V. Santoro, K. H. Andersen, M. Bernasconi, M. Bertelsen, Y. Beßler, D. Campi, V. Czamler, D. D. Di Julio, E. Diane, K. Dunne, P. Fierlinger, A. Gaye, G. Gorini, C. Happe, T. Kittelmann, E. B. Klinkby, Z. Kokai, R. Kolevatov, B. Lauritzen, R. Linander, J. I. Marquez Damian, B. Meirose, F. Mezei, D. Milstead, G. Muhrer , et al. (14 additional authors not shown)

Abstract: The European Spallation Source (ESS), presently under construction in Lund, Sweden, is a multidisciplinary international laboratory that will operate the world's most powerful pulsed neutron source. Supported by a 3M Euro Research and Innovation Action within the EU Horizon 2020 program, a design study (HighNESS) is now underway to develop a second neutron source below the spallation target. Compa… ▽ More The European Spallation Source (ESS), presently under construction in Lund, Sweden, is a multidisciplinary international laboratory that will operate the world's most powerful pulsed neutron source. Supported by a 3M Euro Research and Innovation Action within the EU Horizon 2020 program, a design study (HighNESS) is now underway to develop a second neutron source below the spallation target. Compared to the first source, located above the spallation target and designed for high cold and thermal brightness, the new source will provide higher intensity, and a shift to longer wavelengths in the spectral regions of cold (2 /- 20 Å), very cold (VCN, 10 /- 120 Å), and ultra cold (UCN, > 500 Å) neutrons. The core of the second source will consist of a large liquid deuterium moderator to deliver a high flux of cold neutrons and to serve secondary VCN and UCN sources, for which different options are under study. The features of these new sources will boost several areas of condensed matter research and will provide unique opportunities in fundamental physics. Part of the HighNESS project is also dedicated to the development of future instruments that will make use of the new source and will complement the initial suite of instruments in construction at ESS. The HighNESS project started in October 2020. In this paper, the ongoing developments and the results obtained in the first year are described. △ Less

Submitted 8 April, 2022; originally announced April 2022.

Comments: 10 pages, 10 figures, 14th International Topical Meeting on Nuclear Applications of Accelerators, November 30 to December 4, 2021, Washington, DC

Sensitivity of the SHiP experiment to dark photons decaying to a pair of charged particles

Authors: SHiP Collaboration, C. Ahdida, A. Akmete, R. Albanese, A. Alexandrov, A. Anokhina, S. Aoki, G. Arduini, E. Atkin, N. Azorskiy, J. J. Back, A. Bagulya, F. Baaltasar Dos Santos, A. Baranov, F. Bardou, G. J. Barker, M. Battistin, J. Bauche, A. Bay, V. Bayliss, G. Bencivenni, A. Y. Berdnikov, Y. A. Berdnikov, M. Bertani, C. Betancourt , et al. (309 additional authors not shown)

Abstract: Dark photons are hypothetical massive vector particles that could mix with ordinary photons. The simplest theoretical model is fully characterised by only two parameters: the mass of the dark photon m$_{γ^{\mathrm{D}}}$ and its mixing parameter with the photon, $\varepsilon$. The sensitivity of the SHiP detector is reviewed for dark photons in the mass range between 0.002 and 10 GeV. Different pro… ▽ More Dark photons are hypothetical massive vector particles that could mix with ordinary photons. The simplest theoretical model is fully characterised by only two parameters: the mass of the dark photon m$_{γ^{\mathrm{D}}}$ and its mixing parameter with the photon, $\varepsilon$. The sensitivity of the SHiP detector is reviewed for dark photons in the mass range between 0.002 and 10 GeV. Different production mechanisms are simulated, with the dark photons decaying to pairs of visible fermions, including both leptons and quarks. Exclusion contours are presented and compared with those of past experiments. The SHiP detector is expected to have a unique sensitivity for m$_{γ^{\mathrm{D}}}$ ranging between 0.8 and 3.3$^{+0.2}_{-0.5}$ GeV, and $\varepsilon^2$ ranging between $10^{-11}$ and $10^{-17}$. △ Less

Submitted 1 March, 2021; v1 submitted 10 November, 2020; originally announced November 2020.

Redesign of the ATLAS Tile Calorimeter link Daughterboard for the HL-LHC

Authors: Eduardo Valdes Santurio, Samuel Silverstein, Christian Bohm, Katherine Dunne, Suhyun Lee, Holger Motzkau

Abstract: The Phase-2 ATLAS upgrade for the High Luminosity Large Hadron Collider (HL-LHC) has motivated progressive redesigns of the ATLAS Tile Calorimeter (TileCal) read-out link and control board (Daughterboard). The Daughterboard (DB) communicates with the off-detector electronics via two 4.6 Gbps downlinks and two pairs of 9.6 Gbps uplinks. Configuration commands and LHC timing is received through the… ▽ More The Phase-2 ATLAS upgrade for the High Luminosity Large Hadron Collider (HL-LHC) has motivated progressive redesigns of the ATLAS Tile Calorimeter (TileCal) read-out link and control board (Daughterboard). The Daughterboard (DB) communicates with the off-detector electronics via two 4.6 Gbps downlinks and two pairs of 9.6 Gbps uplinks. Configuration commands and LHC timing is received through the downlinks by two CERN radiation hard GBTx ASICs and propagated through Ultrascale+ FPGAs to the front-end. Simultaneously, the FPGAs send continuous high-speed readout of digitized PMT samples, slow control and monitoring data through the uplink. The design minimizes single points of failure and reduces sensitivity to SEUs and radiation damage by employing a double-redundant scheme, using Triple Mode Redundancy (TMR) and Xilinx Soft Error Mitigation (SEM) in the FPGAs, adopting Cyclic Redundancy Check (CRC) error verification in the uplinks and Forward Error Correction (FEC) in the downlinks. We present a DB redesign that brings an enhanced timing scheme, and improved radiation tolerance by mitigating Single Event Latch-up (SEL) induced errors and implementing a more robust power-up and current monitoring scheme. △ Less

Submitted 27 October, 2020; originally announced October 2020.

Comments: https://indico.cern.ch/event/737461/contributions/3725130/

New high-sensitivity searches for neutrons converting into antineutrons and/or sterile neutrons at the European Spallation Source

Authors: A. Addazi, K. Anderson, S. Ansell, K. Babu, J. Barrow, D. V. Baxter, P. M. Bentley, Z. Berezhiani, R. Bevilacqua, C. Bohm, G. Brooijmans, J. Broussard, R. Biondi, B. Dev, C. Crawford, A. Dolgov, K. Dunne, P. Fierlinger, M. R. Fitzsimmons, A. Fomin, M. Frost, S. Gardner, A. Galindo-Uribarri, E. Golubeva, S. Girmohanta , et al. (70 additional authors not shown)

Abstract: The violation of Baryon Number, $\mathcal{B}$, is an essential ingredient for the preferential creation of matter over antimatter needed to account for the observed baryon asymmetry in the universe. However, such a process has yet to be experimentally observed. The HIBEAM/NNBAR %experiment program is a proposed two-stage experiment at the European Spallation Source (ESS) to search for baryon numbe… ▽ More The violation of Baryon Number, $\mathcal{B}$, is an essential ingredient for the preferential creation of matter over antimatter needed to account for the observed baryon asymmetry in the universe. However, such a process has yet to be experimentally observed. The HIBEAM/NNBAR %experiment program is a proposed two-stage experiment at the European Spallation Source (ESS) to search for baryon number violation. The program will include high-sensitivity searches for processes that violate baryon number by one or two units: free neutron-antineutron oscillation ($n\rightarrow \bar{n}$) via mixing, neutron-antineutron oscillation via regeneration from a sterile neutron state ($n\rightarrow [n',\bar{n}'] \rightarrow \bar{n}$), and neutron disappearance ($n\rightarrow n'$); the effective $Δ\mathcal{B}=0$ process of neutron regeneration ($n\rightarrow [n',\bar{n}'] \rightarrow n$) is also possible. The program can be used to discover and characterise mixing in the neutron, antineutron, and sterile neutron sectors. The experiment addresses topical open questions such as the origins of baryogenesis, the nature of dark matter, and is sensitive to scales of new physics substantially in excess of those available at colliders. A goal of the program is to open a discovery window to neutron conversion probabilities (sensitivities) by up to three orders of magnitude compared with previous searches. The opportunity to make such a leap in sensitivity tests should not be squandered. The experiment pulls together a diverse international team of physicists from the particle (collider and low energy) and nuclear physics communities, while also including specialists in neutronics and magnetics. △ Less

Submitted 8 June, 2020; originally announced June 2020.

SND@LHC

Authors: SHiP Collaboration, C. Ahdida, A. Akmete, R. Albanese, A. Alexandrov, M. Andreini, A. Anokhina, S. Aoki, G. Arduini, E. Atkin, N. Azorskiy, J. J. Back, A. Bagulya, F. Baaltasar Dos Santos, A. Baranov, F. Bardou, G. J. Barker, M. Battistin, J. Bauche, A. Bay, V. Bayliss, G. Bencivenni, A. Y. Berdnikov, Y. A. Berdnikov, M. Bertani , et al. (319 additional authors not shown)

Abstract: We propose to build and operate a detector that, for the first time, will measure the process $pp\toνX$ at the LHC and search for feebly interacting particles (FIPs) in an unexplored domain. The TI18 tunnel has been identified as a suitable site to perform these measurements due to very low machine-induced background. The detector will be off-axis with respect to the ATLAS interaction point (IP1)… ▽ More We propose to build and operate a detector that, for the first time, will measure the process $pp\toνX$ at the LHC and search for feebly interacting particles (FIPs) in an unexplored domain. The TI18 tunnel has been identified as a suitable site to perform these measurements due to very low machine-induced background. The detector will be off-axis with respect to the ATLAS interaction point (IP1) and, given the pseudo-rapidity range accessible, the corresponding neutrinos will mostly come from charm decays: the proposed experiment will thus make the first test of the heavy flavour production in a pseudo-rapidity range that is not accessible by the current LHC detectors. In order to efficiently reconstruct neutrino interactions and identify their flavour, the detector will combine in the target region nuclear emulsion technology with scintillating fibre tracking layers and it will adopt a muon identification system based on scintillating bars that will also play the role of a hadronic calorimeter. The time of flight measurement will be achieved thanks to a dedicated timing detector. The detector will be a small-scale prototype of the scattering and neutrino detector (SND) of the SHiP experiment: the operation of this detector will provide an important test of the neutrino reconstruction in a high occupancy environment. △ Less

Submitted 20 February, 2020; originally announced February 2020.

Comments: Letter of Intent

Report number: CERN-LHCC-2020-002, LHCC-I-035

The active muon shield in the SHiP experiment

Authors: SHiP collaboration, A. Akmete, A. Alexandrov, A. Anokhina, S. Aoki, E. Atkin, N. Azorskiy, J. J. Back, A. Bagulya, A. Baranov, G. J. Barker, A. Bay, V. Bayliss, G. Bencivenni, A. Y. Berdnikov, Y. A. Berdnikov, M. Bertani, C. Betancourt, I. Bezshyiko, O. Bezshyyko, D. Bick, S. Bieschke, A. Blanco, J. Boehm, M. Bogomilov , et al. (207 additional authors not shown)

Abstract: The SHiP experiment is designed to search for very weakly interacting particles beyond the Standard Model which are produced in a 400 GeV/c proton beam dump at the CERN SPS. An essential task for the experiment is to keep the Standard Model background level to less than 0.1 event after $2\times 10^{20}$ protons on target. In the beam dump, around $10^{11}$ muons will be produced per second. The mu… ▽ More The SHiP experiment is designed to search for very weakly interacting particles beyond the Standard Model which are produced in a 400 GeV/c proton beam dump at the CERN SPS. An essential task for the experiment is to keep the Standard Model background level to less than 0.1 event after $2\times 10^{20}$ protons on target. In the beam dump, around $10^{11}$ muons will be produced per second. The muon rate in the spectrometer has to be reduced by at least four orders of magnitude to avoid muon-induced combinatorial background. A novel active muon shield is used to magnetically deflect the muons out of the acceptance of the spectrometer. This paper describes the basic principle of such a shield, its optimization and its performance. △ Less

Submitted 18 May, 2017; v1 submitted 10 March, 2017; originally announced March 2017.

Comments: 8 pages, 5 figures; added clarifications to the penalty function and emphasized that we care about neutrino interactions in the air

Journal ref: 2017_JINST_12_P05011

A facility to Search for Hidden Particles (SHiP) at the CERN SPS

Authors: SHiP Collaboration, M. Anelli, S. Aoki, G. Arduini, J. J. Back, A. Bagulya, W. Baldini, A. Baranov, G. J. Barker, S. Barsuk, M. Battistin, J. Bauche, A. Bay, V. Bayliss, L. Bellagamba, G. Bencivenni, M. Bertani, O. Bezshyyko, D. Bick, N. Bingefors, A. Blondel, M. Bogomilov, A. Boyarsky, D. Bonacorsi, D. Bondarenko , et al. (211 additional authors not shown)

Abstract: A new general purpose fixed target facility is proposed at the CERN SPS accelerator which is aimed at exploring the domain of hidden particles and make measurements with tau neutrinos. Hidden particles are predicted by a large number of models beyond the Standard Model. The high intensity of the SPS 400~GeV beam allows probing a wide variety of models containing light long-lived exotic particles w… ▽ More A new general purpose fixed target facility is proposed at the CERN SPS accelerator which is aimed at exploring the domain of hidden particles and make measurements with tau neutrinos. Hidden particles are predicted by a large number of models beyond the Standard Model. The high intensity of the SPS 400~GeV beam allows probing a wide variety of models containing light long-lived exotic particles with masses below ${\cal O}$(10)~GeV/c$^2$, including very weakly interacting low-energy SUSY states. The experimental programme of the proposed facility is capable of being extended in the future, e.g. to include direct searches for Dark Matter and Lepton Flavour Violation. △ Less

Submitted 20 April, 2015; originally announced April 2015.

Comments: Technical Proposal

Report number: CERN-SPSC-2015-016, SPSC-P-350, 8 April 2015

Expected Performance of the ATLAS Experiment - Detector, Trigger and Physics

Authors: The ATLAS Collaboration, G. Aad, E. Abat, B. Abbott, J. Abdallah, A. A. Abdelalim, A. Abdesselam, O. Abdinov, B. Abi, M. Abolins, H. Abramowicz, B. S. Acharya, D. L. Adams, T. N. Addy, C. Adorisio, P. Adragna, T. Adye, J. A. Aguilar-Saavedra, M. Aharrouche, S. P. Ahlen, F. Ahles, A. Ahmad, H. Ahmed, G. Aielli, T. Akdogan , et al. (2587 additional authors not shown)

Abstract: A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on… ▽ More A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on simulations of the detector and physics processes, with particular emphasis given to the data expected from the first years of operation of the LHC at CERN. △ Less

Submitted 14 August, 2009; v1 submitted 28 December, 2008; originally announced January 2009.