-
Input to the ESPPU 2026 update: Searching for millicharged particles with the FORMOSA experiment at the CERN LHC
Authors:
Matthew Citron,
Frank Golf,
Kranti Gunthoti,
Andrew Haas,
Christopher S. Hill,
Dariush Imani,
Samantha Kelly,
Ming Liu,
Steven Lowette,
Albert De Roeck,
Sai Neha Santpur,
Ryan Schmitz,
Jacob Steenis,
David Stuart,
Yu-Dai Tsai,
Juan Salvador Tafoya Vargas,
Tiepolo Wybouw,
Jaehyeok Yoo
Abstract:
In this contribution, we evaluate the sensitivity for particles with charges much smaller than the electron charge with a dedicated scintillator-based detector in the far forward region at the CERN LHC, FORMOSA. This contribution will outline the scientific case for this detector, its design and potential locations, and the sensitivity that can be achieved. The ongoing efforts to prove the feasibi…
▽ More
In this contribution, we evaluate the sensitivity for particles with charges much smaller than the electron charge with a dedicated scintillator-based detector in the far forward region at the CERN LHC, FORMOSA. This contribution will outline the scientific case for this detector, its design and potential locations, and the sensitivity that can be achieved. The ongoing efforts to prove the feasibility of the detector with the FORMOSA demonstrator will be discussed. Finally, possible upgrades to the detector through the use of high-performance scintillator will be discussed.
△ Less
Submitted 17 April, 2025;
originally announced April 2025.
-
Mapping the in-plane electric field inside irradiated diodes
Authors:
L. Poley,
A. J. Blue,
C. Buttar,
V. Cindro,
C. Darroch,
V. Fadeyev,
J. Fernandez-Tejero,
C. Fleta,
C. Helling,
C. Labitan,
I. Mandić,
S. N. Santpur,
D. Sperlich,
M. Ullán,
Y. Unno
Abstract:
A significant aspect of the Phase-II Upgrade of the ATLAS detector is the replacement of the current Inner Detector with the ATLAS Inner Tracker (ITk). The ATLAS ITk is an all-silicon detector consisting of a pixel tracker and a strip tracker. Sensors for the ITk strip tracker have been developed to withstand the high radiation environment in the ATLAS detector after the High Luminosity Upgrade of…
▽ More
A significant aspect of the Phase-II Upgrade of the ATLAS detector is the replacement of the current Inner Detector with the ATLAS Inner Tracker (ITk). The ATLAS ITk is an all-silicon detector consisting of a pixel tracker and a strip tracker. Sensors for the ITk strip tracker have been developed to withstand the high radiation environment in the ATLAS detector after the High Luminosity Upgrade of the Large Hadron Collider at CERN, which will significantly increase the rate of particle collisions and resulting particle tracks. During their operation in the ATLAS detector, sensors for the ITk strip tracker are expected to accumulate fluences up to 1.6 x 10^15 n_eq/cm^2 (including a safety factor of 1.5), which will significantly affect their performance. One characteristic of interest for highly irradiated sensors is the shape and homogeneity of the electric field inside its active area. For the results presented here, diodes with edge structures similar to full size ATLAS sensors were irradiated up to fluences comparable to those in the ATLAS ITk strip tracker and their electric fields mapped using a micro-focused X-ray beam (beam diameter 2x3 μm^2). This study shows the extension and shape of the electric field inside highly irradiated diodes over a range of applied bias voltages. Additionally, measurements of the outline of the depleted sensor areas allow a comparison of the measured leakage current for different fluences with expectations for the corresponding active areas.
△ Less
Submitted 29 March, 2021;
originally announced March 2021.
-
The ABC130 barrel module prototyping programme for the ATLAS strip tracker
Authors:
Luise Poley,
Craig Sawyer,
Sagar Addepalli,
Anthony Affolder,
Bruno Allongue,
Phil Allport,
Eric Anderssen,
Francis Anghinolfi,
Jean-François Arguin,
Jan-Hendrik Arling,
Olivier Arnaez,
Nedaa Alexandra Asbah,
Joe Ashby,
Eleni Myrto Asimakopoulou,
Naim Bora Atlay,
Ludwig Bartsch,
Matthew J. Basso,
James Beacham,
Scott L. Beaupré,
Graham Beck,
Carl Beichert,
Laura Bergsten,
Jose Bernabeu,
Prajita Bhattarai,
Ingo Bloch
, et al. (224 additional authors not shown)
Abstract:
For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100 % silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000…
▽ More
For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100 % silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000 modules in the forward region (end-caps), which are foreseen to be constructed over a period of 3.5 years. The construction of each module consists of a series of assembly and quality control steps, which were engineered to be identical for all production sites. In order to develop the tooling and procedures for assembly and testing of these modules, two series of major prototyping programs were conducted: an early program using readout chips designed using a 250 nm fabrication process (ABCN-25) and a subsequent program using a follow-up chip set made using 130 nm processing (ABC130 and HCC130 chips). This second generation of readout chips was used for an extensive prototyping program that produced around 100 barrel-type modules and contributed significantly to the development of the final module layout. This paper gives an overview of the components used in ABC130 barrel modules, their assembly procedure and findings resulting from their tests.
△ Less
Submitted 7 September, 2020;
originally announced September 2020.
